TY  - CHAP
A1  - Boesen, Niklas
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Deichsel, Anne
A1  - Klinkel, Sven
ED  - Zabel, Volkmar
ED  - Beinersdorf, Silke
T1  - Untersuchung vorhandenerTragreserven moderner unbewehrter Mauerwerksbauten
T2  - Vortragsband der 15. D-A-CH-Tagung Erdbebeningenieurwesen und Baudynamik
Y1  - 2017
SN  - 978-3-930108-13-5
N1  - 21.-22. September 2017, Weimar.
ISBN laut DNB falsch
SP  - 408
EP  - 418
PB  - Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik (DGEB) e.V.
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Meyer, Udo
A1  - Fehling, Ekkehard
T1  - INSYSME: first activities of the German partners
T2  - 9th International Masonry Conference 2014 in Guimaraes, Portugal, 2014
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rajan, Sreelakshmy
T1  - Design and construction techniques of AAC masonry buildings in earthquakes regions
T2  - 10 years Xella research in Building Materials : Symposium on the 4th and 5th of September, Potsdam 2014
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
ED  - Klinkel, Sven
ED  - Butenweg, Christoph
ED  - Lin, Gao
ED  - Holtschoppen, Britta
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities
N2  - Seismic excited liquid filled tanks are subjected to extreme loading due to hydrodynamic pressures, which can lead to nonlinear stability failure of the thinwalled cylindrical tanks, as it is known from past earthquakes. A significant reduction of the seismically induced loads can be obtained by the application of base isolation systems, which have to be designed carefully with respect to the modified hydrodynamic behaviour of the tank in interaction with the liquid. For this reason a highly sophisticated fluid-structure interaction model has to be applied for a realistic simulation of the overall dynamic system. In the following, such a model is presented and compared with the results of simplified mathematical models for rigidly supported tanks. Finally, it is examined to what extent a simple mechanical model can represent the behaviour of a base isolated tank in case of seismic excitation
Y1  - 2013
SN  - 978-3-658-02810-7
SN  - 978-3-658-02809-1
SN  - 978-3-658-14037-3
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
N1  - International Conference on Seismic Design of Industrial Facilities, Aachen, Germany, 26.-27.09.2013.
https://sedif-conference.jimdofree.com/
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
ED  - Vacareanu, Radu
ED  - Ionescu, Constantin
T1  - Seismic design and evaluation of industrial facilities
T2  - Progresses in European Earthquake Engineering and Seismology. Third European Conference on Earthquake Engineering and Seismology – Bucharest, 2022
N2  - Industrial facilities must be thoroughly designed to withstand seismic
actions as they exhibit an increased loss potential due to the possibly wideranging
damage consequences and the valuable process engineering equipment.
Past earthquakes showed the social and political consequences of seismic damage
to industrial facilities and sensitized the population and politicians worldwide
for the possible hazard emanating from industrial facilities. However, a holistic
approach for the seismic design of industrial facilities can presently neither be
found in national nor in international standards. The introduction of EN 1998-4
of the new generation of Eurocode 8 will improve the normative situation with
specific seismic design rules for silos, tanks and pipelines and secondary process
components. The article presents essential aspects of the seismic design of
industrial facilities based on the new generation of Eurocode 8 using the example
of tank structures and secondary process components. The interaction effects of
the process components with the primary structure are illustrated by means of
the experimental results of a shaking table test of a three story moment resisting
steel frame with different process components. Finally, an integrated approach of
digital plant models based on building information modelling (BIM) and structural
health monitoring (SHM) is presented, which provides not only a reliable
decision-making basis for operation, maintenance and repair but also an excellent
tool for rapid assessment of seismic damage.
KW  - Industrial facilities
KW  - Seismic design
KW  - Tanks
KW  - EN 1998-4
KW  - Structural health monitoring
Y1  - 2022
SN  - 978-3-031-15103-3
SN  - 978-3-031-15106-4
SN  - 978-3-031-15104-0
U6  - http://dx.doi.org/10.1007/978-3-031-15104-0
SN  - 2524-342X
SN  - 2524-3438
N1  - Third European Conference on Earthquake Engineering and Seismology. 04-09.09 Bucharest, Romania.
SP  - 449
EP  - 464
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Sharma, Mamta Rameshwarlal
A1  - Bleck, Wolfgang
A1  - Leicht-Scholten, Carmen
ED  - Farn, C. K.
T1  - Innovation through Diversity - Development of a Diversity and Innovation management concept
T2  - International Conference on Innovation and Management : IAM23017S : Date: July 4-7, 2017, Osaka, Japan
N2  - Acknowledging that a diverse workforce could be a potential source of innovation, the current research deals with the fine details of why diversity management is central to achieving innovation in heterogeneous research groups and how this could be effectively realized in an organization. The types of heterogeneities addressed mainly include gender, qualification, academic discipline and intercultural perspectives. The type of organization being dealt with in this work is a complex association of research institutes at a technical university in Germany (RWTH Aachen University), namely a 'Cluster of Excellence', whereby several institutes of the university work collaboratively in different sub-projects. The 'Cluster of Excellence' is a part of the 'Excellence Initiative' of the German federal and state governments German Research Foundation (DFG) and German Council of Science and Humanities, with the ultimate aim of promoting cutting-edge research. To support interdisciplinary collaboration and thus the performance of the cluster, the development of a diversity and innovation management concept is presently in the conceptual phase and will be described in the frame of this paper. The 3-S-Diversity Model, composed of the three elements: skills, structure and strategy, serves as a basis for the development of the concept. The proposed concept consists of six phases; the first two phases lay the ground work by developing an understanding of the status quo on the forms of diversity in the Cluster of Excellence, the type of organizational structure of the member institutes and the varieties of specialist work cultures of the same. The third and the fourth phases build up on this foundation by means of qualitative and quantitative studies. While the third phase deals with the sensitization of the management level to the close connection between diversity and innovation; the need to manage them thereafter and find tailor-made methods of doing so, the fourth phase shall mainly focus on the mindset of the employees in this regard. The fifth phase shall consolidate the learnings and the ideas developed in the course of the first four phases into an implementable strategy. The ultimate phase shall be the implementation of this concept in the Cluster. The first three phases have been accomplished successfully and the preliminary results are already available.
Y1  - 2017
SN  - 2218-6387
SP  - Panel C
PB  - Kuang Hui Chiu
CY  - Osaka
ER  - 
TY  - CHAP
A1  - Mertens, Alexander
A1  - Brauner, Philipp
A1  - Baier, Ralph
A1  - Brillowski, Florian
A1  - Dammers, Hannah
A1  - van Dyck, Marc
A1  - Kong, Iris
A1  - Königs, Peter
A1  - Kordtomeikel, Frauke
A1  - Liehner, Gian Luca
A1  - Pütz, Sebastian
A1  - Rodermann, Niklas
A1  - Schaar, Anne Kathrin
A1  - Steuer-Dankert, Linda
A1  - Vervier, Luisa
A1  - Wlecke, Shari
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Piller, Frank T.
A1  - Schuh, Günther
A1  - Ziefle, Martina
A1  - Nitsch, Verena
ED  - Michael, Judith
ED  - Pfeiffer, Jérôme
ED  - Wortmann, Andreas
T1  - Modelling Human Factors in Cyber Physical Production Systems by the Integration of Human Digital Shadows
T2  - Modellierung 2022 Satellite Events
N2  - The future of industrial manufacturing and production will increasingly manifest in the form of cyber-physical production systems. Here, Digital Shadows will act as mediators between the physical and digital world to model and operationalize the interactions and relationships between different entities in production systems. Until now, the associated concepts have been primarily pursued and implemented from a technocentric perspective, in which human actors play a subordinate role, if they are considered at all. This paper outlines an anthropocentric approach that explicitly considers the characteristics, behavior, and traits and states of human actors in socio-technical production systems. For this purpose, we discuss the potentials and the expected challenges and threats of creating and using Human Digital Shadows in production.
KW  - human digital shadow
KW  - cyber physical production system
KW  - human factors
Y1  - 2022
U6  - http://dx.doi.org/10.18420/modellierung2022ws-018
SP  - 147
EP  - 149
PB  - GI Gesellschaft für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Mertens, Alexander
A1  - Pütz, Sebastian
A1  - Brauner, Philipp
A1  - Brillowski, Florian Sascha
A1  - Buczak, Nadine
A1  - Dammers, Hannah
A1  - van Dyck, Marc
A1  - Kong, Iris
A1  - Königs, Peter
A1  - Kortomeikel, Frauke Carole
A1  - Rodemann, Niklas
A1  - Schaar, Anne Kathrin
A1  - Steuer-Dankert, Linda
A1  - Wlecke, Shari
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Piller, Frank Thomas
A1  - Schuh, Günther
A1  - Ziefle, Martina
A1  - Nitsch, Verena
T1  - Human digital shadow: Data-based modeling of users and usage in the internet of production
T2  - 14th International Conference on Human System Interaction : 8-10 July 2021. Gdańsk, Poland
N2  - Digital Shadows as the aggregation, linkage and abstraction of data relating to physical objects are a central vision for the future of production. However, the majority of current research takes a technocentric approach, in which the human actors in production play a minor role. Here, the authors present an alternative anthropocentric perspective that highlights the potential and main challenges of extending the concept of Digital Shadows to humans. Following future research methodology, three prospections that illustrate use cases for Human Digital Shadows across organizational and hierarchical levels are developed: human-robot collaboration for manual work, decision support and work organization, as well as human resource management. Potentials and challenges are identified using separate SWOT analyses for the three prospections and common themes are emphasized in a concluding discussion.
KW  - digital shadow
KW  - cyber physical production system
KW  - user & usage
KW  - internet of production
Y1  - 2021
U6  - http://dx.doi.org/10.1109/HSI52170.2021.9538729
SP  - 1
EP  - 8
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Philipp, Brauner
A1  - Brillowski, Florian Sascha
A1  - Dammers, Hannah
A1  - Königs, Peter
A1  - Kordtomeikel, Frauke Carole
A1  - Petruck, Henning
A1  - Schaar, Anne Kathrin
A1  - Schmitz, Seth
A1  - Steuer-Dankert, Linda
A1  - Mertens, Alexander
A1  - Gries, Thomas
A1  - Leicht-Scholten, Carmen
A1  - Nagel, Saskia K.
A1  - Nitsch, Verena
A1  - Schuh, Günther
A1  - Ziefle, Martina
ED  - Mrugalska, Beata
ED  - Trzcielinski, Stefan
ED  - Karwowski, Waldemar
ED  - Nicolantonio, Massimo Di
ED  - Roossi, Emilio
T1  - A research framework for human aspects in the internet of production: an intra-company perspective
T2  - Advances in Manufacturing, Production Management and Process Control:  Proceedings of the AHFE 2020 Virtual Conferences on Human Aspects of Advanced Manufacturing, Advanced Production Management and Process Control, and Additive Manufacturing, Modeling Systems and 3D Prototyping, July 16–20, 2020, USA
N2  - Digitalization in the production sector aims at transferring concepts and methods from the Internet of Things (IoT) to the industry and is, as a result, currently reshaping the production area. Besides technological progress, changes in work processes and organization are relevant for a successful implementation of the “Internet of Production” (IoP). Focusing on the labor organization and organizational procedures emphasizes to consider intra-company factors such as (user) acceptance, ethical issues, and ergonomics in the context of IoP approaches. In the scope of this paper, a research approach is presented that considers these aspects from an intra-company perspective by conducting studies on the shop floor, control level and management level of companies in the production area. Focused on four central dimensions—governance, organization, capabilities, and interfaces—this contribution presents a research framework that is focused on a systematic integration and consideration of human aspects in the realization of the IoP.
KW  - Human factors
KW  - Digitalization
KW  - Acceptance
KW  - Ethics
KW  - Human-robot collaboration
Y1  - 2020
SN  - 978-3-030-51980-3
U6  - http://dx.doi.org/10.1007/978-3-030-51981-0_1
SP  - 3
EP  - 17
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Leicht-Scholten, Carmen
ED  - Tipurić, Darko
ED  - Hruška, Domagoj
T1  - Diversity- and innovation management in complex engineering organizations
T2  - 7th International OFEL Conference on Governance, Management and Entrepreneurship: Embracing Diversity in Organisations. April 5th - 6th, 2019, Dubrovnik, Croatia
N2  - Diversity is increasingly being addressed as an innovation-promoting factor. For this reason, companies and institutions tackle the integration of a diversity management approach that enables a heterogenic perspective on innovation development. However, system-theoretical frameworks state that the implementation of diversity measures that are not tailored to the needs of the organization often leads to a rejection or reactivity with regard to the management approach. In this context, especially organizations, which are characterized by a specific hierarchical structure, a dominant habitus or specialist culture, must face the challenge of realizing a sustainable change of the corporate culture that sets the basis for implementing diversity management approaches. The presented research project focuses on analyzing the situation in a huge scientific collaborative project - so called Cluster of Excellence (CoE) - with the aim to implement a diversity - and innovation management strategy. Considering the influencing determinants, the CoE is characterized by its embeddedness in the scientific system, a complex organizational structure, and a high fluctuation rate. The paper presents a systemic approach of reflecting these factors in order to develop a diversity- and innovation management strategy. In this frame, the results of a quantitative survey of CoE employees and derived mindset-types are presented. The results show a need for taking different mindset-types into account, to be able to develop a tailored management strategy. The aim of the project is to give recommendations for developing a sustainable management concept that promotes both diversity and innovation by drawing on the persisting mindsets of organization members while reflecting top down as well as bottom up factors of implementation processes as well as the psychology of change. This paper addresses all who are concerned with the management of human resources in innovation processes and are striving for a cultural change within the framework of complex organizations.
KW  - Change Management
KW  - Corporate Culture
KW  - Diversity Management
KW  - Engineering
KW  - Innovation Management
Y1  - 2019
SP  - 136
EP  - 157
PB  - Governance Research and Development Centre (CIRU)
CY  - Zagreb
ER  - 
TY  - CHAP
A1  - Müller-Abdelrazeq, Sarah Luisa
A1  - Brauner, Philipp
A1  - Calero Valdez, André
A1  - Jansen, Ulrich
A1  - Platte, Laura
A1  - Schaar, Anne-Kathrin
A1  - Steuer-Dankert, Linda
A1  - Zachow, Sebastian
A1  - Schönefeld, Kathrin
A1  - Haberstroh, Max
A1  - Leicht-Scholten, Carmen
A1  - Ziefle, Martina
ED  - Pather, Shaun
T1  - Interdisciplinary cooperation management in research clusters: a review of twelve years.
T2  - Proceedings of the 15th International Conference on Intellectual Capital, Knowledge Management & Organisational Learning
N2  - As an interdisciplinary research network, the Cluster of Excellence “Integrative Production Technology for High-Wage Countries” (CoE) comprises of around 150 researchers. Their scientific background ranges from mechanical engineering and computer science to social sciences such as sociology and psychology. In addition to content- and methodbased challenges, the CoE’s employees are faced with heterogenic organizational cultures, different hierarchical levels, an imbalanced gender distribution, and a high employee fluctuation. The sub-project Scientific Cooperation Engineering 1 (CSP1) addresses the challenge of interdisciplinary cooperation and organizational learning and aims at fostering interdisciplinarity and its synergies as a source of innovation. Therefore, the project examines means of reaching an organizational development, ranging from temporal structures to a sustainable network in production technology. To achieve this aim, a broad range of means has been developed during the last twelve years: In addition to physical measures such as regular network events and trainings, virtual measures such as the Terminology App were focused. The app is an algorithmic analysis method for uncovering latent topic structures of publications of the CoE to highlight thematic intersections and synergy potentials. The detection and promotion of has been a vital and long known element in knowledge management. Furthermore, CSP1 focusses on project management and thus developed evaluation tools to measure and control the success of interdisciplinary cooperation. In addition to the cooperation fostering measures, CSP1 conducted studies about interdisciplinarity and diversity and their relationship with innovation. The scientific background of these means and the research results of CSP1 are outlined in this paper to offer approaches for successful interdisciplinary cooperation management.
Y1  - 2018
SN  - 978-1-912764-09-9
N1  - hosted by University of the Western Cape, South Africa 29-30 November 2018
SP  - 216
EP  - 224
PB  - ACPIL
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Leicht-Scholten, Carmen
T1  - Innovation and Diversity : Integrating new perspectives into research associations
T2  - 12th European Conference on Innovation and Entrepreneurship (ECIE 2017) : Paris, France, 21-22 September 2017
N2  - The link between diversity and innovation is broadly discussed in the context of research and innovation processes. Many institutions and enterprises, specifically in commerce, have already tried to establish sustainable diversity management concepts, in order to increase the diversity of their workforce in addition to establishing a corporate culture of openness. Alongside the creation of a working place where different experiences and skills are valued equally, the entrepreneurial intention is to transfer diversity into economically relevant advantages. Taking into account the potential of diversity in research and innovation processes, the project “Diversity- and Innovation Management” was incorporated within a large interdisciplinary research Cluster. The project’s purpose was to study the context between diversity and innovation in research associations and to later develop a customised management concept into an interdisciplinary research Cluster on integrative production technology with full integration. The challenge of such research associations lays in an organisational structure which is often described as being decentralised. Researchers coming from different academic disciplines, while having diverse habits, conduct research on large scientific issues and challenges. In addition, these researchers are socialised in different institutions and university chairs. Theses differences in leadership styles, business cultures and organisational strategies, follow into their research team work. Taking a closer look into the management of human resources suggests that decentral organised recruitment processes, as well as allocation of human resources, lead to a lacking overview in regard to missing competencies, perspectives and backgrounds in research networks. These circumstances are comparable to big corporate groups. While developing a management concept for research associations, these characteristics must be considered. To ensure this, the project follows a human-centred approach, which considers top-down, as well as bottom-up perspectives. This paper presents the applied mixed-method approach in the scientific issue described above. In the frame of the Cluster of Excellence “Integrative Production Technology for High-Wage Countries” research results based on quantitative, as well as qualitative studies, were presented as an application example. This paper provides a new perspective on the innovation and diversity context. Against the background of complex research organisations, the development approach of a management concept is particularly interesting.
KW  - Innovation
KW  - Diversity
KW  - Innovation Management
KW  - Diversity Management
KW  - Leadership
Y1  - 2017
SN  - 978-1-911218-54-8
SP  - 767
EP  - 776
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Leicht-Scholten, Carmen
T1  - Social responsibility and innovation - Key competencies for engineers
T2  - ICERI 2016: 9th International Conference of Education, Research and Innovation: Conference Proceedings : Seville (Spain), 14-16 November
N2  - Engineers are of particular importance for the societies of tomorrow. The big social challenges society has to cope with in future, can only be mastered, if engineers link the development and innovation process closely with the requirements of people. As a result, in the frame of the innovation process engineers have to design and develop products for diverse users. Therefore, the consideration of diversity in this process is a core competence engineers should have. Implementing the consideration of diverse requirements into product design is also linked to the development of sustainable products and thus leads to social responsible research and development, the core concept formulated by the EU.
For this reason, future engineers should be educated to look at the technical perspectives of a problem embedded in the related questions within societies they are developing their artefacts for. As a result, the aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world.
To match the competence profiles of future engineers to the global challenges and the resulting social responsibility, RWTH Aachen University, one of the leading technical universities in Germany, has established the bridging professorship “Gender and Diversity in Engineering” (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. The interdisciplinary teaching concept of the research group pursues an approach which imparts an application oriented Gender and Diversity expertise to future engineers. In the frame of an established teaching concept, which is a result of experiences and expertise of the research group, students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge into their later field of action.
In the frame of the conference the institutional approach will be presented as well as the teaching concept which will be introduced by concrete course examples.
KW  - diversity
KW  - innovation
KW  - social responsible engineering
KW  - engineering education
Y1  - 2016
SN  - 978-84-617-5895-1
U6  - http://dx.doi.org/10.21125/iceri.2016.0353
SN  - 2340-1095
SP  - 5967
EP  - 5976
ER  - 
TY  - CHAP
A1  - Leicht-Scholten, Carmen
A1  - Steuer-Dankert, Linda
A1  - Bouffier, Anna
T1  - Facing Future Challenges: Building Engineers for Tomorrow
T2  - Conference proceedings : new perspectives in science education : 5th Conference edition, Florence, Italy, 17-18 March 2016
N2  - Future engineers are increasingly confronted with the so-called Megatrends which are the big social challenges society has to cope with. These Megatrends, such as “Silver Society”, “Globalization”, “Mobility” and “Female Shift” require an application-oriented perspective on Diversity especially in the engineering field. Therefore, it is necessary to enable future engineers not only to look at the technical perspectives of a problem, but also to be able to see the related questions within societies they are developing their artefacts for. The aim of teaching engineering should be to prepare engineers for these requirements and to draw attention to the diverse needs in a globalized world.
Bringing together technical knowledge and social competences which go beyond a mere training of the so-called “soft skills”, is a new approach followed at RWTH Aachen University, one of the leading technical universities in Germany. RWTH Aachen University has established the bridging professorship “Gender and Diversity in Engineering” (GDI) which educates engineers with an interdisciplinary approach to expand engineering limits. In the frame of a sustainable teaching concept the research group under the leadership of Prof. Carmen Leicht-Scholten has developed an approach which imparts a supplication-specific Gender and Diversity expertise to engineers. In workshops students gain theoretical knowledge about Gender and Diversity and learn how to transfer their knowledge in their special field of study and later work. To substantiate this, the course participants have to solve case studies from real life. The cases which are developed in collaboration with non-profit organizations and enterprises from economy rise the students to challenges which are inspired by professional life. Evaluation shows the success of this approach as well as an increasing demand for such teaching formats.
KW  - Diversity
KW  - Engineering Education
KW  - Gender
KW  - Higher Education
Y1  - 2016
SN  - 978-886292-705-5
SP  - 32
EP  - 37
ER  - 
TY  - CHAP
A1  - Steuer-Dankert, Linda
A1  - Berg, Tobias
A1  - Leicht-Scholten, Carmen
T1  - Breaking the habit – new approaches in engineering education
T2  - Proceedings of the 43rd Annual Conference of the European Society for Engineering Education
N2  - Within the framework of the project a genderand diversity-oriented teaching evaluation and modern, media-supported blended learning approaches were used in order to achieve the intended goals. First research results of the literature and status quo analysis were already implemented and tested in newly designed teaching approaches, for example in a multidisciplinary introductory lecture of civil engineering at RWTH Aachen University.
KW  - teaching
KW  - engineering education
KW  - gender and diversity
KW  - best practice
Y1  - 2015
SN  - 978-2-87352-012-0
N1  - Annual Conference of the European Society for Engineering Education , Orléans , France , SEFI , 2015-06-29 - 2015-07-02
ER  - 
TY  - CHAP
A1  - Handschuh, Nils
A1  - Stollenwerk, Dominik
A1  - Borchert, Jörg
T1  - Operation of thermal storage power plants under high renewable grid penetration
T2  - NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems
N2  - The planned coal phase-out in Germany by 2038 will lead to the dismantling of power plants with a total capacity of approx. 30 GW. A possible further use of these assets is the conversion of the power plants to thermal storage power plants; the use of these power plants on the day-ahead market is considerably limited by their technical parameters. In this paper, the influence of the technical boundary conditions on the operating times of these storage facilities is presented. For this purpose, the storage power plants were described as an MILP problem and two price curves, one from 2015 with a relatively low renewable penetration (33 %) and one from 2020 with a high renewable energy penetration (51 %) are compared. The operating times were examined as a function of the technical parameters and the critical influencing factors were investigated. The thermal storage power plant operation duration and the energy shifted with the price curve of 2020
increases by more than 25 % compared to 2015.
KW  - storage optimisation
KW  - storage dispatch
KW  - thermal storage
Y1  - 2021
SN  - 978-3-8007-5651-3
N1  - NEIS 2021: Conference on Sustainable Energy Supply and Energy Storage Systems. 13-14 September 2021. Hamburg, Germany
SP  - 261
EP  - 265
PB  - VDE Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Imani Vashiani, Anahita
A1  - Timmermanns, Tobias
T1  - Threat for human beings due to touch voltages and body currents caused by direct lightning strikes in case of non-isolated lightning protection systems using natural components
T2  - 35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA)
N2  - For typical cases of non-isolated lightning
protection systems (LPS) the impulse currents are investigated which may flow through a human body directly touching a structural part of the LPS. Based on a basic LPS model with conventional down-conductors especially the cases of external and internal steel columns and metal façades are considered and compared. Numerical simulations of the line quantities voltages and currents in the time domain are performed with an equivalent circuit of the entire LPS.
As a result it can be stated that by increasing the number of conventional down-conductors and external steel columns the threat for a human being can indeed be reduced, but not down to an acceptable limit. In case of internal steel columns used as natural down-conductors the threat can be reduced sufficiently, depending on the low-resistive connection of the steel columns to the lightning equipotential bonding or the earth termination system, resp. If a metal façade is used the threat for human beings touching is usually very low, if the façade is sufficiently interconnected and multiply connected to the lightning equipotential bonding or the earth termination system, resp.
KW  - Lightning protection system
KW  - down-conductor
KW  - steel columns
KW  - metal façade
KW  - touch voltage
Y1  - 2021
SN  - 978-1-6654-2346-5
U6  - http://dx.doi.org/10.1109/ICLPandSIPDA54065.2021.9627465
N1  - 35th International Conference on Lightning Protection (ICLP) and XVI International Symposium on Lightning Protection (SIPDA), 20-26 Sept. 2021, Colombo, Sri Lanka
PB  - IEEE
ER  - 
TY  - CHAP
A1  - El Moussaoui, Noureddine
A1  - Kassmi, Khalil
A1  - Alexopoulos, Spiros
A1  - Schwarzer, Klemens
A1  - Chayeb, Hamid
A1  - Bachiri, Najib
T1  - Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy
T2  - Materialstoday: Proceedings
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.matpr.2021.03.115
SN  - 2214-7853
ER  - 
TY  - CHAP
A1  - Dümmler, Andreas
A1  - Oetringer, Kerstin
A1  - Göttsche, Joachim
T1  - Auslegungstool zur energieeffizienten Kühlung von Gebäuden
T2  - DKV-Tagung 2020, AA IV
Y1  - 2020
N1  - Deutsche Kälte- und Klimatagung 2020 online
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Oetringer, Kerstin
A1  - Dümmler, Andreas
A1  - Göttsche, Joachim
T1  - Neues Modell zur 1D-Simulation der indirekten Verdunstungskühlung
T2  - DKV‐Tagung 2020, AA II.1
Y1  - 2020
N1  - Deutsche Kälte- und Klimatagung 2020 online
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Mistler, M.
A1  - Butenweg, Christoph
A1  - Anthoine, A.
T1  - Evaluation of the failure criterion for masonry by homogenisation
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.201
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Schwager, Christian
A1  - Ghiasi, Mona
A1  - Schmitz, Pascal
A1  - Bohang, Fakhri
A1  - Caminos, Ricardo Alexander Chico
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming
T2  - AIP Conference Proceedings
Y1  - 2020
U6  - http://dx.doi.org/10.1063/5.0029974
IS  - 2303
SP  - 170012-1
EP  - 170012-9
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Caminos, Ricardo Alexander Chico
A1  - Ürlings, Nicolas
A1  - Dutta, Siddharth
A1  - Ruiz, Victor
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis
A1  - Agathokleous, Rafaela
A1  - Jung, Christian
A1  - Alexopoulos, Spiros
A1  - Atti, Vikrama Nagababu
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus
T2  - AIP Conference Proceedings
Y1  - 2020
U6  - http://dx.doi.org/10.1063/5.0029278
IS  - 2303
SP  - 140004-1
EP  - 140004-10
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative System for Earthquake Resistant Masonry Infill Walls
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11479
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
A1  - Fehling, Ekkehard
A1  - Pfetzing, Thomas
A1  - Kubalski, Thomas
T1  - Experimental and Numerical Investigations of Reinforced Concrete Frames with Masonry Infills under Combined In- and Out-of-plane Seismic Loading
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11477
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Frequency Dependent Impedance Analysis of the Foundation-Soil-Systems of Onshore Wind Turbines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 11440
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Schmitt, Timo
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic Impact And Design Of Buried Pipelines
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
N2  - Seismic design of buried pipeline systems for energy and water supply is not only important for plant and operational safety but also for the maintenance of the supply infrastructure after an earthquake. The present paper shows special issues of the seismic wave impacts on buried pipelines, describes calculation methods, proposes approaches and gives calculation examples. This paper regards the effects of transient displacement differences and resulting tensions within the pipeline due to the wave propagation of the earthquake. However, the presented model can also be used to calculate fault rupture induced displacements. Based on a three-dimensional Finite Element Model parameter studies are performed to show the influence of several parameters such as incoming wave angle, wave velocity, backfill height and synthetic displacement time histories. The interaction between the pipeline and the surrounding soil is modeled with non-linear soil springs and the propagating wave is simulated affecting the pipeline punctually, independently in time and space. Special attention is given to long-distance heat pipeline systems. Here, in regular distances expansion bends are arranged to ensure movements of the pipeline due to high temperature. Such expansion bends are usually designed with small bending radii, which during the earthquake lead to high bending stresses in the cross-section of the pipeline. Finally, an interpretation of the results and recommendations are given for the most critical parameters.
Y1  - 2018
N1  - Paper No 10600
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Milkova, Kristina
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Dumova-Jovanoska, Elena
T1  - Development of Seismic Vulnerability Curves for Region Specific Masonry Buildings
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10522
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Anic, Filip
A1  - Penava, Davorin
A1  - Guljas, Ivica
A1  - Sarhosis, Vasilis
A1  - Abrahamczyk, Lars
A1  - Butenweg, Christoph
T1  - The Effect of Openings on Out-of-Plane Capacity of Masonry Infilled Reinforced Concrete Frames
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
N1  - Paper No 10168
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Boesen, Niklas
A1  - Gellert, Christoph
T1  - Evaluation of the Seismic Behavior of a Modern URM Building During the 2012 Northern Italy Earthquakes
T2  - 16th European Conference on Earthquake Engineering, Thessaloniki, 18-21 June, 2018
Y1  - 2018
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Butenweg, Christoph
A1  - Marinković, Marko
A1  - Klinkel, S.
T1  - Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as
reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.
Y1  - 2017
N1  - Paper No 3064
SP  - 1
EP  - 11
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rajan, Sreelakshmy
A1  - Holtschoppen, B.
A1  - Dalguer, L. A.
A1  - Klinkel, S.
A1  - Butenweg, Christoph
ED  - Sas, P.
T1  - Seismic fragility analysis of a non-conventional reinforced concrete structure considering different uncertainties
T2  - Proceedings of ISMA2016, International Conference on Noise and Vibration Engineering/USD2016, International Conference on Uncertainty in Structural Dynamics, / ISMA 2016, USD 2016
Y1  - 2016
SP  - 4213
EP  - 4225
PB  - KU Leuven
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Wuttke, Claudia
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Kubalski, Thomas
T1  - Verbesserte seismische Nachweiskonzepte für Mauerwerksbauten in deutschen Erdbebengebieten
T2  - Adam, Christoph (Hrsg.) ; Univ. Innsbruck: 16. D-A-CH Tagung Erdbebeningenieurwesen & Baudynamik 2019 : 26. und 27. September 2019, Innsbruck
Y1  - 2019
SN  - 978-3-200-06454-6
SP  - 713
EP  - 722
CY  - Innsbruck
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - http://dx.doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Marinković, Marko
A1  - Butenweg, Christoph
ED  - Modena, Claudio
T1  - Numerical investigation of masonry infilled R.C. frames
T2  - Brick and Block Masonry. Proceedings of the 16th International Brick and Block Masonry Conference, Padova, Italy, 26-30 June 2016
Y1  - 2016
SN  - 9781315374963
SP  - 1219
EP  - 1226
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Michel, Philipp
A1  - Rosin, Julia
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - Soil-dependent earthquake spectra in the analysis of liquid-storage-tanks on compliant soil
T2  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
SP  - 245
EP  - 254
ER  - 
TY  - CHAP
A1  - Cacciatore, Pamela
A1  - Butenweg, Christoph
T1  - Seismic safety of cylindrical granular material steel silos under seismic loading
T2  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
SP  - 231
EP  - 244
ER  - 
TY  - CHAP
A1  - Markinkovic, Marko
A1  - Butenweg, Christoph
A1  - Pavese, A.
A1  - Lanese, I.
A1  - Hoffmeister, B.
A1  - Pinkawa, M.
A1  - Vulcu, C.
A1  - Bursi, O.
A1  - Nardin, C.
A1  - Paolacci, F.
A1  - Quinci, G.
A1  - Fragiadakis, M.
A1  - Weber, F.
A1  - Huber, P.
A1  - Renault, P.
A1  - Gündel, M.
A1  - Dyke, S.
A1  - Ciucci, M.
A1  - Marino, A.
T1  - Investigation of the seismic behaviour of structural and nonstructural components in industrial facilities by means of shaking table tests
T2  - Seismic design of industrial facilities 2020: proceedings of the 2nd International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference)
Y1  - 2020
SN  - 978-3-86359-729-0
SP  - 159
EP  - 172
ER  - 
TY  - CHAP
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Seismic behaviour of RC frames with uncoupled masonry infills having two storeys or two bays
T2  - 17th International Conference -From historical to sustainable masonry, Krakow, Poland, July 5-8, 2020
Y1  - 2020
U6  - http://dx.doi.org/10.1201/9781003098508-72
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Sildatke, Michael
A1  - Karwanni, Hendrik
A1  - Kraft, Bodo
A1  - Schmidts, Oliver
A1  - Zündorf, Albert
T1  - Automated Software Quality Monitoring in Research Collaboration Projects
T2  - ICSEW'20: Proceedings of the IEEE/ACM 42nd International Conference on Software Engineering Workshops
Y1  - 2020
U6  - http://dx.doi.org/10.1145/3387940.3391478
SP  - 603
EP  - 610
ER  - 
TY  - CHAP
A1  - Paulsen, Svea
A1  - Hoffstadt, Kevin
A1  - Krafft, Simone
A1  - Leite, A.
A1  - Zang, J.
A1  - Fonseca-Zang, W.
A1  - Kuperjans, Isabel
T1  - Continuous biogas production from sugarcane as sole substrate
T2  - Energy Reports
Y1  - 2020
U6  - http://dx.doi.org/10.1016/j.egyr.2019.08.035
N1  - 6th International Conference on Energy and Environment Research, ICEER 2019, 22–25 July, University of Aveiro, Portugal
VL  - 6
IS  - Supplement 1
SP  - 153
EP  - 158
PB  - Elsevier
ER  - 
TY  - CHAP
A1  - Sattler, Johannes, Christoph
A1  - Alexopoulos, Spiros
A1  - Caminos, Ricardo Alexander Chico
A1  - Mitchell, John C.
A1  - Ruiz, Victor C.
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis K.
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Dynamic simulation model of a parabolic trough collector system with concrete thermal energy storage for process steam generation
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117663
SN  - 0094243X
VL  - 2126
SP  - 150007-1
EP  - 150007-8
ER  - 
TY  - CHAP
A1  - May, Martin
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Latzke, Markus
A1  - Bäumer, Klaus
A1  - Uhlig, Ralf
A1  - Söhn, Matthias
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Experimental facility for investigations of wire mesh absorbers for pressurized gases
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117547
SN  - 0094243X
VL  - 2126
SP  - 030035-1
EP  - 030035-9
ER  - 
TY  - CHAP
A1  - Mahdi, Zahra
A1  - Rendón, Carlos
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Novel concept for indirect solar-heated methane reforming
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117694
SN  - 0094-243X
VL  - 2126
SP  - 180014-1
EP  - 180014-7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Birkl, Josef
A1  - Diendorfer, Gerhard
A1  - Kern, Alexander
A1  - Thern, Stephan
T1  - Extrem hohe Blitzströme
T1  - Extremly high lightning currents
T2  - 12. VDE/ABB-Blitzschutztagung : Beiträge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg
Y1  - 2017
SN  - 978-3-8007-4459-6
SP  - 146
EP  - 152
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Brocke, Ralph
T1  - Planung von Fangeinrichtungen mit dem dynamischen elektro-geometrischen Modell - Mögliche praktische Anwendungen
T1  - Design of air-terminations using the dynamic electro-geometrical model - Possible practical applications
T2  - 12. VDE/ABB-Blitzschutztagung : Beiträge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg
Y1  - 2017
SN  - 978-3-8007-4459-6
SP  - 75
EP  - 82
ER  - 
TY  - CHAP
A1  - Kern, Alexander
T1  - Optimierung des Blitzschutzes bei Biogasanlagen
T1  - Improvement of lightning protection for biogas plants
T2  - 12. VDE/ABB-Blitzschutztagung : Beiträge der 12. VDE/ABB-Fachtagung, 12.-13. Oktober 2017, Aschaffenburg
Y1  - 2017
SN  - 978-3-8007-4459-6
SP  - 48
EP  - 56
ER  - 
TY  - CHAP
A1  - Gorzalka, Philip
A1  - Dahlke, Dennis
A1  - Göttsche, Joachim
A1  - Israel, Martin
A1  - Patel, Dhruvkumar
A1  - Prahl, Christoph
A1  - Schmiedt, Jacob Estevam
A1  - Frommholz, Dirk
A1  - Hoffschmidt, Bernhard
A1  - Linkiewicz, Magdalena
T1  - Building Tomograph–From Remote Sensing Data of Existing Buildings to Building Energy Simulation Input
T2  - EBC, Annex 71, Fifth expert meeting, October 17-19, 2018, Innsbruck, Austria
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Birkl, Josef
A1  - Diendorfer, Gerhard
A1  - Kern, Alexander
A1  - Thern, Stephan
T1  - Extremely high lightning peak currents
T2  - 34th International Conference on Ligntning Protection, 02-07 September 2018
Y1  - 2018
SN  - 978-1-5386-6635-7
ER  - 
TY  - CHAP
A1  - Pieper, Martin
T1  - Lernzielorientierte Kurse und Stack Aufgaben in der Mathematikausbildung
T2  - Beiträge zum Mathematikunterricht 2018 : Vorträge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft für Didaktik der Mathematik). Bd. 3
Y1  - 2018
SN  - 978-3-95987-089-4
SP  - 1399
EP  - 1402
PB  - WTM-Verlag
CY  - Münster
ER  - 
TY  - CHAP
A1  - Pieper, Martin
T1  - Digitale Hochschullehre in mathematischen und mathematikdidaktischen Veranstaltungen
T2  - Beiträge zum Mathematikunterricht 2018 : Vorträge zur Mathematikdidaktik und zur Schnittstelle Mathematik/Mathematikdidaktik auf der gemeinsamen Jahrestagung GDM und DMV 2018 (52. Jahrestagung der Gesellschaft für Didaktik der Mathematik). Bd. 1
Y1  - 2018
SN  - 978-3-95987-089-4
SP  - 105
EP  - 106
PB  - WTM-Verlag
CY  - Münster
ER  - 
TY  - CHAP
A1  - Rupp, Matthias
A1  - Kuperjans, Isabel
A1  - Schulze, Sven
ED  - Berns, Karsten
T1  - Energetische und ökologische Bewertung hybrider Antriebe im städtischen Busverkehr
T2  - Commercial vehicle technology 2016 : proceedings of the 4th Commercial Vehicle Technology Symposium (CVT 2016), March 8-10, 2016, University of Kaiserslautern, Kaiserslautern, Germany
N2  - In Anbetracht weltweit zunehmend strengerer klimapolitischer
Ziele steigt auch der Druck für Nutzfahrzeughersteller, effizientere und umweltfreundlichere
Technologien zu entwickeln. Den Blick bei der Bewertung dieser
ausschließlich auf die Fahrzeugnutzung zu richten, ist längst nicht mehr zufriedenstellend.
Im Rahmen dieser Analyse wird ein gegenwärtig auf dem Markt erwerblicher
und in deutschen Städten bereits seit Jahren betriebener Hybridbus
energetisch und ökologisch mit einem konventionell angetriebenen, nahezu baugleichen
Modell entlang des Lebensweges bewertet.
Nach Definition von Ziel und Untersuchungsrahmen wird ein Überblick auf bereits
durchgeführte Lebenszyklusanalysen zu Hybridbussen im Stadtverkehr gegeben
und Schlussfolgerungen für die anschließende Analyse abgeleitet. Diese
wird im Rahmen einer energetischen und ökologischen Bewertung beider Produktsysteme
anhand der Parameter "Primärenergieeinsatz" und "CO2äq Emissionen"
praktiziert. Der Fahrzeugrumpf beider Fahrzeuge des gleichen Modells
wird dabei als einheitlich angenommen, sodass bei dem Vergleich der Herstellung
vereinfacht nur die sich unterscheidenden Komponenten des Antriebstranges
berücksichtigt werden. Die Resultate der Wirkungsabschätzung werden als
Differenz des Hybridbusses gegenüber dem Referenzfahrzeug über die einzelnen
Lebenszyklusphasen dargestellt. Schließlich werden Prognosen getroffen, ab
welcher Strecke die bei der Herstellung erzeugten höheren CO2äq Emissionen
des Hybridantriebstranges gegenüber dem Referenzmodell ausgeglichen werden.
Y1  - 2016
SP  - 227
EP  - 237
PB  - Shaker
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Stollenwerk, Dominik
A1  - Rieke, C.
A1  - Dahmen, Markus
A1  - Pieper, Martin
T1  - Biogas Production Modelling : A Control System Engineering Approach
T2  - IOP Conference Series: Earth and Environmental Science. Bd. 32
Y1  - 2016
U6  - http://dx.doi.org/10.1088/1755-1315/32/1/012008
SN  - 1755-1315
N1  - ICARET 2016, International Conference on Advances in Renewable Energy and Technologies, Putrajaya, MY, Feb 23-25, 2016
SP  - 012008/1
EP  - 012008/4
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Modellierung eines basisisolierten, zylindrischen Flüssigkeitstanks aus Stahl
T2  - 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, Österreich
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
T1  - Simulation von Impact Belastungen auf Stahlbetonstrukturen
T2  - 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, Österreich
Y1  - 2013
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
T1  - Ermittlung der optimalen Geometrie von Flüssigkeitssäulendämpfern auf Grundlage neuer Optimierungsansätze
T2  - 13. D-A-CH Tagung für Erdbebeningenieurwesen und Baudynamik (D-A-CH 2013) : 29.-30. August 2013, Wien, Österreich
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
A1  - Renault, Philippe
T1  - Simulation of impact-loads on reinforced concrete structural elements
T2  - 22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Kubalski, Thomas
T1  - Seismic response of conventional and base-isolated liquid storage tanks
T2  - International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Nonlinear behaviour of masonry under cyclic loading
T2  - 7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
T1  - Seismic vulnerability assessment of bridges
T2  - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005
Y1  - 2005
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Sadegh-Azar, H.
A1  - Meskouris, Konstantin
T1  - Seismische Vulnerabilität von bestehenden Bauwerken
T2  - 5. Forum und Gefahrentag : auf der Suche nach dem Risiko : ein aktuelles Symposium zu Fragen der Risikowahrnehmung und Katastrophenvorsorge in Deutschland, ZDF Mainz Lerchenberg, 13. - 14. Oktober, 2004
Y1  - 2004
SP  - 1
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kuhlmann, Winfried
A1  - Lopez, M.
A1  - Fernandez, S.
T1  - Seismic vulnerability assessment of the Aachen Cathedral based on measurements and numerical simulations
T2  - International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003
Y1  - 2003
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Wagner, R.
A1  - Noh, S.-Y.
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Seismic excited granular material silos
T2  - Structural dynamics - EURODYN 2002 : proceedings of the 4th [i.e. 5th] International Conference on Structural Dynamics, Munich, Germany, 2 - 5 September 2002 / ed. by H. Grundmann ...
Y1  - 2002
SN  - 90-5809-511-8
SP  - 253
EP  - 258
PB  - Balkema
CY  - Lisse
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Kuhlmann, Wolfram
T1  - Technical information system for collaborative material research
T2  - Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]
Y1  - 2002
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
A1  - Renault, Philippe
A1  - Hyun, An Jun
T1  - Dynamic analysis of a reinforced concrete electrical nuclear building of SMART 2013 project subjected to earthquake excitation using ABAQUS
T2  - Workshop SMART2013 : Paris, France, November 25th - 27th, 2014
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
A1  - Taddei, Francesca
T1  - Vibration mitigation of wind turbine towers by tuned liquid column dampers
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 1531
EP  - 1538
CY  - Porto
ER  - 
TY  - CHAP
A1  - Altay, Okyay
A1  - Klinkel, Sven
A1  - Butenweg, Christoph
T1  - Intelligente semiaktive Dämpfungssysteme zur Reduktion periodischer und stochastischer Bauwerksschwingungen
T2  - Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universität München / Hrsg. Kai-Uwe Bletzinger ...
Y1  - 2014
SN  - 978-3-00-041256-1
SP  - 397
EP  - 404
PB  - Lehrstuhl für Statik, Techn. Univ. München
CY  - München
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Berechnungsansatz für basisisolierte Tankbauwerke
T2  - Berichte der Fachtagung Baustatik - Baupraxis 12 am 24. und 25. Februar 2014 an der Technischen Universität München / Hrsg. Kai-Uwe Bletzinger ...
Y1  - 2014
SN  - 978-3-00-041256-1
SP  - 103
EP  - 112
PB  - Lehrstuhl für Statik, Techn. Univ. München
CY  - München
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sheshov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - New coupled finite-infinite element approach for wave propagation simulation of unbounded soil media
T2  - 2nd European Conference on Earthquake Engineering and Seismology 2014 (2nd ECEES) : joint event of the 15th European Conference on Earthquake Engineering and the 34th General Assembly of the European Seismological Commission : Istanbul, Turkey, 25-29 August 2014 / European Association for Earthquake Engineering (EAEE) ; Vol. 2
Y1  - 2014
SN  - 978-1-5108-1021-1
SP  - 1556
EP  - 1561
PB  - Curran Associates, Inc.
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Butenweg, Christoph
T1  - Seismic isolation of cylindrical liquid storage tanks
T2  - Proceedings of the 9th European Conference on Structural Dynamics, EURODYN 2014 Porto, Portugal, 30 June - 2 July 2014 / A. Cunha, E. Caetano, .... (eds.)
Y1  - 2014
SN  - 978-972-752-165-4
SP  - 3145
EP  - 3152
CY  - Porto
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Macro-elements identification in historic chapels: the case of St. Venerio Chapel in Reggiolo - Emilia Romagna
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Giresini, Linda
A1  - Butenweg, Christoph
A1  - Andreini, M.
A1  - De Falco, A.
A1  - Sassu, M.
T1  - Numerical calibration of a macro-element for vaultes system in historic churches
T2  - 9th International Conference on Structural Analyses of Historical Conctruction, 14 - 17 October, 2014, Mexico City
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Edip, Kemal
A1  - Garevski, Mihail
A1  - Butenweg, Christoph
A1  - Sesov, Vlatko
A1  - Bojadjieva, Julijana
A1  - Gjorgjiev, Igor
T1  - Boundary effects on seismic analysis of multi-storey frames considering soil structure interaction phenomenon
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed
Y1  - 2014
SN  - 978-3-658-02809-1 (Print) ; 978-3-658-02810-7
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_47
SP  - 569
EP  - 576
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Rosin, Julia
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Seismic Design of cylindrical liquid storage tanks
T2  - Seismic design of industrial facilities : proceedings of the International Conference on Seismic Design of Industrial Facilities (SeDIF-Conference) ; [Aachen, 26. - 27. September 2013] / Chair of Structural Statics and Dynamics, RWTH Aachen. Sven Klinkel ..., ed.
Y1  - 2014
SN  - 978-3-658-02810-7 (E-Book) ; 978-3-658-02809-1 (Print)
U6  - http://dx.doi.org/10.1007/978-3-658-02810-7_36
SP  - 429
EP  - 440
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
T1  - Eurocode 8 : Erdbebenauslegung von Tragwerken
T2  - Eurocodes 2012 kompakt - Chancen nutzen : 36. Darmstädter Massivbauseminar Zukunftsfähiges Planen und Bauen, 7. und 8. März
Y1  - 2012
SP  - 257
EP  - 272
PB  - Freunde des Inst. für Massivbau der TU
CY  - Darmstadt
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
A1  - Meister, Sylvia
A1  - Dreyer, Stephan
A1  - Schulte-Althoff, Christoph
T1  - Technisches Informationssystem für die Entwicklung textilbewehrten Betons
T2  - Textilbeton in Theorie und Praxis : Tagungsband zum 6. Kolloquium zu Textilbewehrten Tragwerken (CTRS6) in Berlin am 19. und 20.9.2011 / Technische Universität Dresden, Sonderforschungsbereich 528, herausgegeben von Manfred Curbach und Regine Ortlepp
Y1  - 2011
SN  - 978-3-86780-122-5
SP  - 257
EP  - 268
PB  - Technische Universität
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Höfler, M.
A1  - Kneer, R.
A1  - Groß, Rolf Fritz
A1  - Kehrmann, K.
ED  - Vorobieff, P.
T1  - Chemical determination of oxygen transfer rates, transfer efficiencies and interphases evoked by aeration elements for liquid flows
T2  - Computational Methods in Multiphase Flow VIII. - (WIT Transactions on Engineering Sciences ;  Volume 89)
Y1  - 2015
SN  - 978-1-84564-946-3 (Print-Ausgabe)
SN  - 978-1-84564-947-0 (Online-Ausgabe)
SN  - 1746-4471
SP  - 89
EP  - 101
PB  - WIT Press
CY  - Southampton
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Karadogan, Faruk
T1  - Numerical investigation of AAC wall panels based on the damage plasticity constitutive law
T2  - Cement, Wapno, Beton ; 2011, 7, Special issue: 5th International Conference on Autoclaved Aerated Concrete 'Securing a sustainable future' to be held at Bydgoszcz to celebrate 60 years of AAC experience in Poland, Bydgoszcz, September 14-17, 2011
Y1  - 2011
SN  - 1425-8129
SP  - 86
EP  - 91
PB  - Stowarzyszenie Producentów Cementu i Wapna
CY  - Krakow
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Park, Jin
T1  - Verhalten von Ankerschienensystemen unter statisch zyklischen Beanspruchungen
T2  - 12. D-A-CH Tagung 2011 : Erdbeben und Baudynamik ; 15./16. September 2011, Hannover, Deutschland / Bundesanstalt für Geowissenschaften und Rohstoffe. C. Könke (Hrsg.)
Y1  - 2011
SN  - 3-930108-11-9
SP  - 349
EP  - 365
CY  - Deutsche Gesellschaft für Erdbebeningenieurwesen und Baudynamik
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holtschoppen, Britta
A1  - Butenweg, Christoph
A1  - Rosin, Julia
T1  - Seismic analysis of liquid storage tanks
T2  - Earthquake Geology and Archaeology: Science, Society and Critical facilities : proceedings ; 2nd INQUA-IGCP 567 International Workshop on Active Tectonics, Earthquake Geology, Archaeology and Engineering ; 19-24 September 2011, Corinth (Greece) / Eds.: C. Grützner ; R. Pérez-Lopez ; T. Fernández Steeger ; I. Papanikolaou ; K. Reicherter ; P. G. Silva ; A. Vött. Volume 2
Y1  - 2011
SN  - 978-960-466-093-3
SP  - 136
EP  - 139
PB  - The Natural hazards Laboratory, National and Kapodistrian University of Athens
CY  - Athens
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Butenweg, Christoph
A1  - Kubalski, Thomas
T1  - Numerical simulation of unreinforced masonry walls subject to dynamic out-of-plane loading
T2  - COMPDYN 2011 : ECCOMAS Thematic Conference ; Proceedings of the 3rd International Conference on Computational Methods in Structural Dynamics and Earthquake Engineering ; 25-28 May, 2011, Corfu, Greece / Eds.: M. Papadrakakis ...
Y1  - 2011
SN  - 978-960-99994-0-3
SP  - 1
EP  - 10
PB  - National Technical Univ. of Athens
CY  - Athen
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - El-Daib, Khaled
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - A novel macroelement approach for masonry walls
T2  - Proceedings of the 8th International Conference on Structural Dynamics, EURODYN 2011 : Leuven, Belgium, 4 - 6 July 2011 / Katholieke Universiteit Leuven, ... G. De Roeck ... (eds)
Y1  - 2011
SN  - 978-90-76019-31-4
SP  - 3281
EP  - 3286
PB  - K. U. Leuven, Dep. of Civil Engineering
CY  - Leuven
ER  - 
TY  - CHAP
A1  - Holtschoppen, Britta
A1  - Cornelissen, Philipp
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Vereinfachtes Berechnungsverfahren zur Berücksichtigung der Interaktionsschwingung bei flüssigkeitsgefüllten Tankbauwerken unter seismischer Belastung
T2  - Berichte der Fachtagung Baustatik-Baupraxis 11 : am 21. und 22. Februar 2011 an der Universität Innsbruck / Hrsg. Gernot Beer ...
Y1  - 2011
SN  - 978-3-85125-115-9
SP  - 155
EP  - 162
PB  - Inst. für Baustatik, Techn. Univ. Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Reindl, Lukas
A1  - Park, Jin
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Seismic design of masonry walls subject to out-of-plane bending
T2  - Proceedings of the Tenth International Conference on Computational Structures Technology : Valencia, Spain, 14 - 17 September 2010 / organised in association with: Universidad Politecnica de Valencia ... Ed. by B. H. V. Topping ...
Y1  - 2010
SN  - 978-1-905088-36-2
U6  - http://dx.doi.org/10.4203/ccp.93.348
SP  - Paper 348
PB  - Civil-Comp Press
CY  - Kippen
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Park, Jin
A1  - Butenweg, Christoph
T1  - Seismic safety verification of masonry structures
T2  - Proceedings of the Eight International Masonry Conference : held in Dresden from 4th to 7th of July 2010 / [International Masonry Society ; Technische Universität Dresden]. Ed. by: Wolfram Jäger ... Volume 1. (Masonry / International Masonry Society Special Publication ; 11)
Y1  - 2010
SN  - 978-3-00-031381-3
SP  - 813
EP  - 822
PB  - ARGE 8IMC Dresden
CY  - Radebeul
ER  - 
TY  - CHAP
A1  - Frauenrath, Tobias
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Otten, Mario
A1  - Niendorf, Thoralf
T1  - 3D mapping of vocal fold geometry during articulatory maneuvers using ultrashort echo time imaging at 3.0 T
T2  - ISMRM-ESMRMB joint annual meeting 2010 : Stockholm, Sweden, 1 - 7 May 2010. Band 4
Y1  - 2010
SN  - 978-1-617-82008-3
SP  - 3087
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Park, Jin
A1  - Butenweg, Christoph
A1  - Reindl, Lukas
T1  - Untersuchung der Eignung von Ankerschienensystemen unter Erdbebeneinwirkungen
T2  - Conference proceedings / ANSYS Conference & 28th CADFEM Users´ Meeting 2010 : 3. - 5. November 2010, Eurogess Aachen / CADFEM; ANSYS
Y1  - 2010
SN  - 3-937523-07-3
SP  - Dokument 2.11.1
PB  - CADFEM [u.a.]
CY  - Grafing
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Niendorf, Thoralf
A1  - Frauenrath, Tobias
A1  - Otten, Mario
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - 3D vocal fold geometry mapping using Magnetic Resonance Imaging
T2  - Fortschritte der Akustik : 36. Deutsche Jahrestagung für Akustik ; 15.-18. März 2010, [Berlin ; DAGA 2010] / DEGA ... Wiss. Ed. Michael Möser ... Band 1
Y1  - 2010
SN  - 978-3-9808659-8-2
SP  - 271
EP  - 272
PB  - Deutsche Gesellschaft für Akustik
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Butenweg, Christoph
T1  - Nichtlinearer Erdbebennachweis von Mauerwerksbauten
T2  - Erdbeben und Mauerwerk : 11. D-A-CH-Tagung 2009 ; [10./11. September 2009 in Zürich] / SGEB, Swiss Society for Earthquake Engineering and Structural Dynamics; Schweizerischer Ingenieur- und Architektenverein, Fachgruppe für Brückenbau und Hochbau. [Hrsg. Dazio, Alessandro ...]
Y1  - 2009
SN  - 978-3-03732-021-1
SP  - 125
EP  - 132
PB  - SIA
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Kob, Malte
A1  - Niendorf, Thoralf
A1  - Butenweg, Christoph
T1  - An approach for numerical calculation of glottal flow during glottal closure
T2  - Proceedings / NAG/DAGA 2009, International Conference on Acoustics : Rotterdam, 23 - 26 March 2009 ; [including the 35th German Annual Conference on Acoustics (DAGA)] / [organisers: Acoustical Society of the Netherlands (NAG); German Acoustical Society (DEGA) ...]. Ed. by Marinus M. Boone
Y1  - 2009
SN  - 978-3-9808659-6-8
SP  - 1722
EP  - 1725
PB  - DEGA
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Meskouris, Konstantin
T1  - Ein neuer Ansatz zum Nachweis von Mauerwerksbauten
T2  - Berichte der Fachtagung Baustatik - Baupraxis 10 : am 17. und 18. März 2008 in Karlsruhe / Hrsg.: Werner Wagner. Institut für Baustatik, Universität Karlsruhe (TH)
Y1  - 2008
SN  - 978-3-935322-14-0
SP  - 103
EP  - 116
PB  - Inst. für Baustatik, Univ. Karlsruhe (TH)
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Displacement based design of masonry structures
T2  - Proceedings of the 14th International Brick and Block Masonry Conference : (Incorporating the 8th Australasian Masonry Conference) : Sydney, Australia, 13.-20. February 2008 / ed. Mark Masia ...
Y1  - 2008
SN  - 978-19-2070-1-92-5
SP  - 1
EP  - 10
PB  - University of Newcastle
CY  - Callaghan
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
A1  - Reindl, Lukas
T1  - Capacity design of masonry buildings under cyclic loading
T2  - Seismic Risk : Earthquakes in North-Western Europe ; international colloquium ; Liège on 11 and 12 September 2008 / Belgian Seismic Group (BeSeiG). Ed.: T. Camlebeeck ...
Y1  - 2008
SN  - 978-2-87456-063-7
SP  - 201
EP  - 208
PB  - Editions de l'Université de Liège
CY  - Liège
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Holler, Stefan
A1  - Butenweg, Christoph
A1  - Meiners, Daniel
T1  - A multiphase model with hypoplastic formulation of the solid phase and its application to earthquake engineering problems
T2  - Computational structural dynamics and earthquake engineering / ed. by Manolis Papadrakakis .... (Structures and infrastructures series ; 2)
Y1  - 2009
SN  - 978-0-415-45261-8
U6  - http://dx.doi.org/10.1201/9780203881637.ch19
SP  - 293
EP  - 308
PB  - CRC Press
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
T1  - Nachweis der Erdbebensicherheit von Silos aus Stahl unter Erdbebenbelastung
T2  - D-A-CH Tagung 2007 : Aktuelle Themen des Erdbebeningenieurwesens und der Baudynamik ; 27. und 28. September 2007, arsenal research, TECHbase Vienna
Y1  - 2007
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Mistler, Michael
T1  - Seismic resistance of unreinforced masonry buildings
T2  - Proceedings of the Eighth International Conference on Computational Structures Technology : [Las Palmas de Cran Canaria, 12-15 September 2006] / ed. by B. H. V. Topping ...
Y1  - 2006
SN  - 1-905088-06-X
U6  - http://dx.doi.org/10.4203/ccp.83.9
SP  - Paper 9
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - CHAP
A1  - Kob, Malte
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Niendorf, Thoralf
T1  - Training of a combined model of larynx and vocal folds with data from MRI measurements
T2  - The 5th International Conference on Voice Physiology and Biomechanics: Variations across Cultures and Species, July 12-14, 2006, Tokyo, Japan. Proceedings
Y1  - 2006
SP  - 45
EP  - 46
ER  -