TY  - JOUR
A1  - Staat, Manfred
T1  - Shakedown and ratchetting under tension-torsion loadings: analysis and experiments
N2  - Structural design analyses are conducted with the aim of verifying the exclusion of ratchetting. To this end it is important to make a clear distinction between the shakedown range and the ratchetting range. The performed experiment comprised a hollow tension specimen which was subjected to alternating axial forces, superimposed with constant moments. First, a series of uniaxial tests has been carried out in order to calibrate a bounded kinematic hardening rule. The load parameters have been selected on the basis of previous shakedown analyses with the PERMAS code using a kinematic hardening material model. It is shown that this shakedown analysis gives reasonable agreement between the experimental and the numerical results. A linear and a nonlinear kinematic hardening model of two-surface plasticity are compared in material shakedown analysis.
KW  - Einspielen <Werkstoff>
KW  - Einspielen
KW  - Ratchetting
KW  - Zug-Druck Belastung
KW  - shakedown
KW  - ratchetting
KW  - tension–torsion loading
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Kraft, Bodo
T1  - Conceptual design mit ArchiCAD 8 : Forschungsprojekt an der RWTH Aachen
N2  - Projektbericht in GraphisoftNews - Architektur und Bauen in einer vernetzten Welt 3/2003 4 Seiten
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - Architektur
KW  - CAD
KW  - civil engineering
KW  - architecture
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Baroud, G.
A1  - Wu, J.Z.
A1  - Bohner, M
A1  - Sponagel, Stefan
A1  - Steffen, T.
T1  - How to determine the permeability for cement infiltration into osteoporotic cancellous bone
JF  - Medical Engineering & Physics. 25 (2003), H. 4
N2  - Cement augmentation is an emerging surgical procedure in which bone cement is used to infiltrate and reinforce osteoporotic vertebrae. Although this infiltration procedure has been widely applied, it is performed empirically and little is known about the flow characteristics of cement during the injection process. We present a theoretical and experimental approach to investigate the intertrabecular bone permeability during the infiltration procedure. The cement permeability was considered to be dependent on time, bone porosity, and cement viscosity in our analysis. In order to determine the time-dependent permeability, ten cancellous bone cores were harvested from osteoporotic vertebrae, infiltrated with acrylic cement at a constant flow rate, and the pressure drop across the cores during the infiltration was measured. The viscosity dependence of the permeability was determined based on published experimental data. The theoretical model for the permeability as a function of bone porosity and time was then fit to the testing data. Our findings suggest that the intertrabecular bone permeability depends strongly on time. For instance, the initial permeability (60.89 mm4/N.s) reduced to approximately 63% of its original value within 18 seconds. This study is the first to analyze cement flow through osteoporotic bone. The theoretical and experimental models provided in this paper are generic. Thus, they can be used to systematically study and optimize the infiltration process for clinical practice.
KW  - Osteoporose
KW  - Permeabilität
KW  - Viskose Strömung
KW  - Viskosität
KW  - Vertebroplastie
KW  - Cement infiltration
KW  - Vertebroplasty
KW  - Osteoporosis
KW  - Permeability
KW  - Experiment
KW  - Analysis
KW  - Viscous flow
Y1  - 2003
SN  - 1350-4533
SP  - 283
EP  - 288
ER  -