TY  - JOUR
A1  - Börner, Sebastian
A1  - Funke, Harald
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Control system modifications for a hydrogen fuelled gas-turbine
JF  - Proceedings of ISROMAC 13
Y1  - 2010
SN  - 978-1-617-38848-4
N1  - 13th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 2010 (ISROMAC-13), Honolulu, Hawaii, USA, April 4-7, 2010
SP  - 665
EP  - 670
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - JOUR
A1  - Steinseifer, Ulrich
A1  - Kashefi, Ali
A1  - Hormes, Marcus
A1  - Schoberer, Mark
A1  - Orlikowsky, Thorsten
A1  - Behbahani, Mehdi
A1  - Behr, Marek
A1  - Schmitz-Rode, Thomas
T1  - Miniaturization of ECMO Systems : Engineering Challenges and Methods
JF  - Artificial Organs. 33 (2009), H. 5
Y1  - 2009
SN  - 1525-1594
N1  - Fifth International Conference on Pediatric Mechanical Circulatory Support Systems and Pediatric Cardiopulmonary Perfusion Abstracts <May 28, 2009>
SP  - A55
EP  - A55
ER  - 
TY  - JOUR
A1  - Jansen, Sebastian
A1  - Behbahani, Mehdi
A1  - Laumen, Marco
A1  - Kaufmann, Tim
A1  - Hormes, Marcus
A1  - Schmitz-Rode, Thomas
A1  - Behr, Marek
A1  - Steinseifer, Ulrich
T1  - 3D Stereo-PIV Validation for CFD-Simulation of Steady Flow through the Human Aorta using Rapid-Prototyping techniques
Y1  - 2010
N1  - abstract ; IV International Symposium on Modelling of Physiological Flows, Sardinia, Italy, June 02-05, 2010 ; MPF2010
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Probst, M.
A1  - Mai, A.
A1  - Tran, L.
A1  - Vonderstein, K.
A1  - Keschenau, P.
A1  - Linde, T.
A1  - Steinseifer, U.
A1  - Behr, Marek
A1  - Mottaghy, K.
T1  - The influence of high shear on thrombosis and hemolysis in artificial organs
JF  - The International Journal of Artificial Organs
Y1  - 2010
SN  - 0391-3988
VL  - 33
IS  - 7
SP  - 426
EP  - 426
PB  - Sage
CY  - Thousand Oaks
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Nicolai, M.
T1  - Interaktive Exploration von Blutströmungsprozessen in Herzpumpen
JF  - VRCA-Jahresbericht 2005/2006
Y1  - 2006
N1  - Virtual Reality Center <Aachen >
SP  - 88
EP  - 90
PB  - Virtual Reality Center
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Behr, Marek
A1  - Arora, D.
A1  - Coronado, O.
A1  - Pasquali, M.
T1  - CFD Analysis of MicroMed Debakey Pump and Hemolysis Prediction / Behbahani, M. ; Behr, M. ; Arora, D. ; Coronado, O. ; Pasquali, M.
JF  - Artificial Organs. 30 (2006), H. 11
Y1  - 2006
SN  - 1525-1594
N1  - Abstracts 14th Congress of the International Society for Rotary Blood Pumps, Leuven, Belgium, August 31–September 2, 2006 ; S7-4
SP  - A45
EP  - A46
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Behr, Marek
A1  - Nicolai, Mike
A1  - Probst, Markus
T1  - Towards Shape Optimization for Ventricular Assist Devices Using Parallel Stabilized FEM
JF  - NIC Symposium 2008 : symposium, 20 - 21 February 2008, Forschungszentrum Jülich ; proceedings / organized by John von Neumann Institute for Computing. Ed. by Gernot Münster; Dietrich Wolf; Manfred Kremer (ed.)
Y1  - 2008
SN  - 978-3-9810843-5-1
N1  - NIC series ; 39
SP  - 325
EP  - 332
PB  - Forschungszentrum
CY  - Jülich
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Behr, Marek
A1  - Bischof, F.
A1  - Wolf, G. E.
T1  - Kranken Herzen helfen - Ingenieure und Informatiker entwickeln gemeinsam eine Miniaturblutpumpe / Behbahani, M. ; Behr, M. ; Bischof, F. ; Wolf, G. E.
JF  - RWTH-Themen (2007)
Y1  - 2007
SN  - 0179-079X
SP  - 44
EP  - 46
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Nicolai, M.
A1  - Probst, M.
A1  - Behr, Marek
T1  - Simulation of Blood Flow in a Ventricular Assist Device
JF  - inSIDE. 5 (2007), H. 1
Y1  - 2007
SP  - 28
EP  - 31
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Finocchiaro, Thomas
A1  - Heinke, Stefanie
A1  - Leßmann, Marc
T1  - Methods of design, simulation, and control for the development of new VAD/TAH concepts = Methoden zur Konstruktion, Simulation und Regelung für die Entwicklung von neuen VAD/TAH-Konzepten / Finocchiaro, Thomas ; Heinke, Stefanie ; Behbahani, Mehdi ; Leßma
JF  - Biomedizinische Technik / Biomedical Engineering. 54 (2009), H. 5
Y1  - 2009
SN  - 0013-5585
N1  - Printausgabe in der Bereichsbibliothek Jülich vorhanden : 63 Z 471
SP  - 269
EP  - 281
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Spillner, Jan
A1  - Kopp, Rüdiger
A1  - Finocchiaro, Thomas
T1  - Assistierte Zirkulation : ein Überblick aus klinischer Sicht = Assisted circulation: an overview from a clinical perspective / Spillner, Jan ; Kopp, Rüdiger ; Finocchiaro, Thomas ; Behbahani, Mehdi ; Rossaint, Rolf ; Steinseifer, Ulrich ; Behr, Marek ; Au
JF  - Biomedizinische Technik / Biomedical Engineering. 54 (2009), H. 5
Y1  - 2009
SN  - 0013-5585
N1  - Printausgabe in der Bereichsbibliothek Jülich vorhanden : 63 Z 471
SP  - 255
EP  - 267
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Behbahani, Mehdi
A1  - Behr, Marek
A1  - Hormes, M.
A1  - Steinseifer, U.
A1  - Arora, D.
A1  - Coronado, O.
A1  - Pasquali, M.
T1  - A Review of Computational Fluid Dynamics Analysis of Blood Pumps
JF  - European Journal of Applied Mathematics. 20 (2009), H. 4
Y1  - 2009
SP  - 363
EP  - 397
PB  - Cambridge Univ. Press
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Maiwald, Volker
A1  - Dachwald, Bernd
T1  - Mission design for a multiple-rendezvous mission to Jupiter's trojans
N2  - In this paper, we will provide a feasible mission design for a multiple-rendezvous mission to Jupiter's Trojans. It is based on solar electric propulsion, as being currently used on the DAWN spacecraft, and other flight-proven technology. First, we have selected a set of mission objectives, the prime objective being the detection of water -especially subsurface water -to provide evidence for the Trojans' formation at large solar distances. Based on DAWN and other comparable missions, we have determined suitable payload instruments to achieve these objectives. Afterwards, we have designed a spacecraft that is able to carry the selected payload to the Trojan region and rendezvous successively with three target bodies within a maximum mission duration of 15 years. Accurate low-thrust trajectories have been obtained with a global low-thrust trajectory optimization program (InTrance). During the transfer from Earth to the first target, the spacecraft is propelled by two RIT-22 ion engines from EADS Astrium, whereas a single RIT-15 is used for transfers within the Trojan region to reduce the required power. For power generation, the spacecraft uses a multi-junction solar array that is supported by concentrators. To achieve moderate mission costs, we have restricted the launch mass to a maximum of 1600 kg, the maximum interplanetary injection capability of a Soyuz/Fregat launcher. Our final layout has a mass of 1400 kg, yielding a margin of about 14%. Nestor (a member of the L4-population) was determined as the first mission target. It can be reached within 4.6 years from launch. The fuel mass ratio for this transfer is about 35%. The stay time at Nestor is 1.2 years. Eurymedon was selected as the second target (transfer time 3.5 years, stay time 3.0 years) and Irus as the third target (transfer time 2.2 years). The transfers within the Trojan L4-population can be accomplished with fuel mass ratios of about 3% for each trajectory leg. Including the stay times in orbit around the targets, the mission can be accomplished within a total duration of about 14.5 years. According to our mission analysis, it is also feasible to fly to the L5-population with similar flight times. It has to be noted that -for a first analysis -we have taken only the named targets into account. Allowing also rendezvous with unnamed objects will very likely decrease the mission duration. Based on a scaling of DAWN's mission costs (due to comparable scientific instruments and mission objectives), and taking into account the longer mission duration and the potential re-use of already developed technology, we have estimated that these three rendezvous can be accomplished with a budget of about 250 Million Euros, i.e. about 25% of ROSETTA's budget.
Y1  - 2010
N1  - 38th COSPAR Scientific Assembly. Held 18-15 July 2010,Bremen, Germany
SP  - 3
ER  - 
TY  - JOUR
A1  - Berretz, Frank
A1  - Skorupa, Sascha
A1  - Sander, Volker
A1  - Belloum, Adam
A1  - Bubak, Marian
T1  - Actor-Driven Workflow Execution in Distributed Environments
JF  - Euro-Par 2010 Parallel Processing Workshops : HeteroPAR, HPCC, HiBB, CoreGrid, UCHPC, HPCF, PROPER, CCPI, VHPC ; Ischia, Italy, August 31 - September 3, 2010 ; revised selected papers / Mario R. Guarracino ... (eds.)
Y1  - 2011
SN  - 978-3-642-21877-4
N1  - Lecture Notes in Computer Science ; 6586
SP  - 287
EP  - 294
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Geimer, Konstantin
A1  - Sauerborn, Markus
A1  - Hoffschmidt, Bernhard
A1  - Schmitz, Mark
A1  - Göttsche, Joachim
T1  - Test facility for absorber specimens of solar tower power plants
JF  - Advances in Science and Technology
N2  - The Solar-Institute Jülich (SIJ) has initiated the construction of the first and only German solar tower power plant and is now involved in the accompanying research. The power plant for experimental and demonstration purposes in the town of Jülich started supplying electric energy in the beginning of 2008. The central receiver plant features as central innovation an open volumetric receiver, consisting of porous ceramic elements that simultaneously absorb the concentrated sunlight and transfer the heat to ambient air passing through the pores so that an average temperature of 680°C is reached. The subsequent steam cycle generates up to 1.5 MWe. A main field of research at the SIJ is the optimization of the absorber structures. To analyze the capability of new absorber specimens a special test facility was developed and set up in the laboratory. A high-performance near-infrared radiator offers for single test samples a variable and repeatable beam with a power of up to 320 kW/m² peak. The temperatures achieved on the absorber surface can reach more than 1000°C. To suck ambient air through the open absorber - like on the tower - it is mounted on a special blower system. An overview about the test facility and some recent results will be presented.
Y1  - 2010
U6  - https://doi.org/10.4028/www.scientific.net/AST.74.266
N1  - 5th Forum on New Materials : CIMTEC 2010, Montecatini Terme, Italy 13-18 June 2010. Part C
VL  - 74
SP  - 266
EP  - 271
PB  - Trans Tech Publications
CY  - Baech
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Schmidt, Frank-Michael
A1  - Hötter, Jan-Steffen
A1  - Sokalla, Wolfgang
A1  - Sokalla, Patrick
T1  - Additive manufacturing by selective laser melting the realizer desktop machine and its application for the dental industry
JF  - Physics Procedia
N2  - Additive Manufacturing of metal parts by Selective Laser Melting has become a powerful tool for the direct manufacturing of complex parts mainly for the aerospace and medical industry. With the introduction of its desktop machine, Realizer targeted the dental market. The contribution describes the special features of the machine, discusses details of the process and shows manufacturing results focused on metal dental devices.
KW  - scan strategy
KW  - dental bridges
KW  - cobald chrome
KW  - Selective Laser Melting (SLM)
KW  - additive manufacturing
Y1  - 2010
U6  - https://doi.org/10.1016/j.phpro.2010.08.082
SN  - 1875-3892
N1  - Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Part 2
VL  - 5 B
IS  - 2
SP  - 543
EP  - 549
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
T1  - Solarthermische Kraftwerke mit thermischen Speichern
JF  - Chemie Ingenieur Technik
N2  - Solarthermische Kraftwerke stellen eine bedeutende Technologieoption für einen nachhaltigen Energiemix der Zukunft dar. Sie konzentrieren die Strahlung der Sonne, erzeugen Wärme und wandeln diese mit konventioneller Kraftwerkstechnik in Strom um. Die Wärme kann auch gespeichert werden, so dass der Betrieb während des Durchzugs von Wolken möglich ist und bis in die Abendstunden hinein verlängert werden kann. Zu den solarthermischen Kraftwerken gehören neben der Parabolrinne und dem Solarturm der Fresnel-Kollektor und die Dish-Stirling-Systeme. Im Zuge einer späteren Vergrößerung des Solarfeldes von Solarkraftwerken kann mithilfe von thermischen Energiespeichern die solare Energieerzeugung bei gleichbleibender Kraftwerksleistung sukzessiv bis um den Faktor 3 erweitert werden. Es besteht so die Möglichkeit einer massiven Substitution von fossilen Brennstoffen.Bei den ersten solarthermischen Speichern für die SEGS-Parabolrinnekraftwerke wurde Öl als Speichermedium eingesetzt. Ein weiteres Speichermedium ist Salzschmelze, die im Andasol-1-Projekt in Spanien sowie bei Solarturmkraftwerken eingesetzt wird. Beton ist ein weiteres mögliches Speichermaterial für Parabolrinnensysteme. Eine weitere Alternative bei einem Solarturmkraftwerk mit Luft als Wärmeträgermedium ist die Verwendung von keramischen Feuerfestmaterialien in Form von Schüttungen oder stapelbaren, porösen Elementen. In Jülich wurde das weltweit erste solarthermische Turmkraftwerk mit einer Leistung von 1,5 MWe, das Luft als Wärmeträgermedium einsetzt und einen solchen Speicher verwendet, gebaut.
Y1  - 2010
SN  - 1522-2640
U6  - https://doi.org/10.1002/cite.201050678
N1  - Special Issue: ProcessNet-Jahrestagung 2010 und 28. Jahrestagung der Biotechnologen
VL  - 82
IS  - 9
SP  - 1606
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Kern, Alexander
A1  - Schelthoff, Christof
A1  - Mathieu, Moritz
T1  - Probability of lightning strikes to air-terminations of structures using the electro-geometrical model theory and the statistics of lightning current parameters
JF  - Atmospheric Research. 104 (2011)
Y1  - 2011
SN  - 0169-8095
N1  - Article in Press
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Wurm, Patrick
T1  - Mission analysis and performance comparison for an Advanced Solar Photon Thruster
JF  - Advances in Space Research
Y1  - 2011
SN  - 0273-1177
VL  - 48
IS  - 11
SP  - 1858
EP  - 1868
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Scholz, Christina
A1  - Romagnoli, Daniele
A1  - Dachwald, Bernd
A1  - Theil, Stephan
T1  - Performance analysis of an attitude control system for solar sails using sliding masses
JF  - Advances in Space Research
Y1  - 2011
SN  - 0273-1177
VL  - 48
IS  - 11
SP  - 1822
EP  - 1835
PB  - Elsevier
CY  - Amsterdam
ER  -