TY  - PAT
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Altherr, Marcel
A1  - Schiessl, Helmut F.
T1  - Topfspinnvorrichtung : [Offenlegungsschrift]
T1  - Pot spinning device : [Patentschrift]
N2  - "The invention relates to a pot spinning device (1) comprising a thread guide (9) which can be moved backwards and forwards and introduced into an opening (8) on the end side of the pot (7) so as to deposit a thread on the inside wall of a spinning pot. In order to improve upon pot spinning devices of this kind, the spinning pot is connected to an electric drive mechanism (10), mounted in magnetic bearings and provided with a gastight housing. Said housing encompasses the spinning pot (7), is open in the area where there is an opening in the end side of the pot and is provided with a seal (19) to seal off the intermediate area (17) between the housing and spinning pot. The housing is also connected to a supply of light-gas via a feed line (18), thereby enabling a light-gas atmosphere to be maintained in the intermediate area."
Y1  - 1999
N1  - Außerdem veröffentlicht als: DE19815546(C2), CA2334866(A1), AU3704699(A) und AR019018(A1)
PB  - Deutsches Patent- und Markenamt ; Weltorganisation für Geistiges Eigentum
CY  - München ; Genf
ER  - 
TY  - JOUR
A1  - Fischer, Jan-Thomas
A1  - Kowalski, Julia
A1  - Pudasaini, Shiva P.
T1  - Topographic curvature effects in applied avalanche modelling
JF  - Cold Regions Science and Technology
N2  - This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.
KW  - Snow
KW  - Avalanche
Y1  - 2012
U6  - https://doi.org/10.1016/j.coldregions.2012.01.005
SN  - 1872-7441
VL  - 74-75
SP  - 21
EP  - 30
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Schänzle, Christian
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Pelz, Peter
T1  - TOR – Towards the energetically optimal ventilation system
KW  - Energy
KW  - Efficiency
KW  - Ventilation System
KW  - Discrete Optimisation
KW  - TGA
Y1  - 2015
N1  - EST 2015, Karlsruhe, 19-21 Mai 2015
ER  - 
TY  - BOOK
A1  - Hegewald, Ulf
T1  - Toscana-Graphie : Dokumentation zweier Exkursionen / Fachhochschule Aachen, Fachbereich Gestaltung.  Exkursionsleitung: Ulf Hegewald ...
Y1  - 1984
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - JOUR
A1  - Röhlen, Desiree
A1  - Pilas, Johanna
A1  - Dahmen, Markus
A1  - Keusgen, Michael
A1  - Selmer, Thorsten
A1  - Schöning, Michael Josef
T1  - Toward a Hybrid Biosensor System for Analysis of Organic and Volatile Fatty Acids in Fermentation Processes
JF  - Frontiers in Chemistry
N2  - Monitoring of organic acids (OA) and volatile fatty acids (VFA) is crucial for the control of anaerobic digestion. In case of unstable process conditions, an accumulation of these intermediates occurs. In the present work, two different enzyme-based biosensor arrays are combined and presented for facile electrochemical determination of several process-relevant analytes. Each biosensor utilizes a platinum sensor chip (14 × 14 mm²) with five individual working electrodes. The OA biosensor enables simultaneous measurement of ethanol, formate, d- and l-lactate, based on a bi-enzymatic detection principle. The second VFA biosensor provides an amperometric platform for quantification of acetate and propionate, mediated by oxidation of hydrogen peroxide. The cross-sensitivity of both biosensors toward potential interferents, typically present in fermentation samples, was investigated. The potential for practical application in complex media was successfully demonstrated in spiked sludge samples collected from three different biogas plants. Thereby, the results obtained by both of the biosensors were in good agreement to the applied reference measurements by photometry and gas chromatography, respectively. The proposed hybrid biosensor system was also used for long-term monitoring of a lab-scale biogas reactor (0.01 m³) for a period of 2 months. In combination with typically monitored parameters, such as gas quality, pH and FOS/TAC (volatile organic acids/total anorganic carbonate), the amperometric measurements of OA and VFA concentration could enhance the understanding of ongoing fermentation processes.
Y1  - 2018
U6  - https://doi.org/10.3389/fchem.2018.00284
IS  - 6
PB  - Frontiers
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Arreola, Julio
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Toward an immobilization method for spore-based biosensors in oxidative environment
JF  - Electrochimica Acta
Y1  - 2019
U6  - https://doi.org/10.1016/j.electacta.2019.01.148
VL  - 302
SP  - 394
EP  - 401
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Öhlschläger, Peter
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Toward multi-analyte bioarray sensors: LAPS-based on-chip determination of a Michaelis–Menten-like kinetics for cell culturing
JF  - Physica status solidi A : Applications and materials science
N2  - The metabolic activity of Chinese hamster ovary (CHO) cells was observed using a light-addressable potentiometric sensor (LAPS). The dependency toward different glucose concentrations (17–200 mM) follows a Michaelis–Menten kinetics trajectory with Kₘ = 32.8 mM, and the obtained Kₘ value in this experiment was compared with that found in literature. In addition, the pH shift induced by glucose metabolism of tumor cells transfected with the HPV-16 genome (C3 cells) was successfully observed. These results indicate the possibility to determine the tumor cells metabolism with a LAPS-based measurement device.
Y1  - 2014
U6  - https://doi.org/10.1002/pssa.201330464
SN  - 1521-396X (E); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1410
EP  - 1415
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Bromm, Alexander
A1  - Wendeler, Luisa
A1  - Iken, Heiko
A1  - Palomar Duran, Marlena
A1  - Greeff, Anton
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards a biosensor to monitor the sterilisation efficiency of aseptic filling machines
JF  - Physica status solidi (a)
N2  - Sterilisation processes are compulsory in medicine, pharmacy, and food industries to prevent infections of consumers and microbiological contaminations of products. Monitoring the sterilisation by conventional microbiological methods is time- and lab-consuming. To overcome this problem, in this work a novel biosensor has been proposed. The sensor enables a fast method to evaluate sterilisation processes. By means of thin-film technology the sensor's transducer structures in form of IDEs (interdigitated electrodes) have been fabricated on a silicon substrate. Physical characterisation of the developed sensor was done by AFM, SEM, and profilometry. Impedance analyses were conducted for the electrical characterisation. As microbiological layer spores of B. atrophaeus have been immobilised on the sensing structure; spores of this type are a well-known sterilisation test organism. Impedance measurements at a fixed frequency over time were performed to monitor the immobilisation process. A sterilisation process according to aseptic filling machines was applied to demonstrate the sensor functionality. After both, immobilisation and sterilisation, a change in impedance could successfully be detected.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431900
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1299
EP  - 1305
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Arzdorf, M.
A1  - Mulchandani, P.
A1  - Chen, W.
A1  - Mulchandani, A.
T1  - Towards a capacitive enzyme sensor for direct determination of organophosphorus pesticides: Fundamentals studies and aspects of development
JF  - Sensors. 3 (2003), H. 6
Y1  - 2003
SN  - 1424-8220
SP  - 119
EP  - 127
ER  - 
TY  - CHAP
A1  - Gömmel, Andreas
A1  - Butenweg, Christoph
A1  - Kob, Malte
T1  - Towards a complete finite-element model of human phonation: modeling phonatory maneuvers
T2  - 12th Workshop on the Finite Element Method in Biomedical Engineering, Biomechanics and Related Fields : Ulm, Germany, 20 - 21 July 2005 / University of Ulm, Department of Orthodontics ...
Y1  - 2005
SN  - 978-3-9806183-8-0
PB  - Univ., Dep. of Orthodontics
CY  - Ulm
ER  - 
TY  - CHAP
A1  - Becker, Jörg
A1  - Eggert, Mathias
A1  - Winkelmann, Axel
A1  - Knackstedt, Ralf
T1  - Towards a Contingency Theory based Model of the Influence of Regulation on MIS
T2  - Proceedings of the Seventeenth Americas Conference on Information Systems, Detroit, Michigan August 4th -7 th 2011
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Chircu, Alina
A1  - Czarnecki, Christian
A1  - Friedmann, Daniel
A1  - Pomaskow, Johanna
A1  - Sultanow, Eldar
T1  - Towards a Digital Twin of Society
T2  - Proceedings of the 56th Hawaii International Conference on System Sciences 2023
N2  - This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions.
KW  - Digital twin
KW  - Digital transformation
KW  - Prototype
KW  - Society
KW  - Stress testing
Y1  - 2023
SN  - 978-0-9981331-6-4
N1  - 56th Hawaii International Conference on System Sciences, HICSS 2023, Maui, Hawaii, USA, January 3-6, 2023
SP  - 6748
EP  - 6757
PB  - University of Hawai'i
CY  - Honolulu
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Drinic, Aleksander
A1  - Iken, Heiko
A1  - Kröger, Nadja
A1  - Zinser, Max
A1  - Smeets, Ralf
A1  - Köpf, Marius
A1  - Kopp, Alexander
A1  - Schöning, Michael Josef
T1  - Towards a flexible electrochemical biosensor fabricated from biocompatible Bombyx mori silk
JF  - Biosensors and Bioelectronics
Y1  - 2021
U6  - https://doi.org/10.1016/j.bios.2021.113204
SN  - 0956-5663
VL  - 183
IS  - Art. 113204
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Dylla, Frank
A1  - Lakemeyer, Gerhard
A1  - Murray, Jan
T1  - Towards a League-Independent Qualitative Soccer Theory for RoboCup  / Dylla, Frank ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Murray, Jan ; Obst, Oliver ; Röfer, Thomas ; Stolzenburg, Frieder ; Visser, Ubbo
JF  - RoboCup 2004: Robot Soccer World Cup VIII / Daniele Nardi ... (ed.).
Y1  - 2005
SN  - 978-3-540-25046-8
N1  - Lecture Notes in Computer Science ; 3276
SP  - 611
EP  - 618
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Eichenbaum, Julian
A1  - Nikolovski, Gjorgji
A1  - Mülhens, Leon
A1  - Reke, Michael
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - Towards a lifelong mapping approach using Lanelet 2 for autonomous open-pit mine operations
T2  - 2023 IEEE 19th International Conference on Automation Science and Engineering (CASE)
N2  - Autonomous agents require rich environment models for fulfilling their missions. High-definition maps are a well-established map format which allows for representing semantic information besides the usual geometric information of the environment. These are, for instance, road shapes, road markings, traffic signs or barriers. The geometric resolution of HD maps can be as precise as of centimetre level. In this paper, we report on our approach of using HD maps as a map representation for autonomous load-haul-dump vehicles in open-pit mining operations. As the mine undergoes constant change, we also need to constantly update the map. Therefore, we follow a lifelong mapping approach for updating the HD maps based on camera-based object detection and GPS data. We show our mapping algorithm based on the Lanelet 2 map format and show our integration with the navigation stack of the Robot Operating System. We present experimental results on our lifelong mapping approach from a real open-pit mine.
Y1  - 2023
SN  - 979-8-3503-2069-5 (Online)
SN  - 979-8-3503-2070-1 (Print)
U6  - https://doi.org/10.1109/CASE56687.2023.10260526
N1  - 19th International Conference on Automation Science and Engineering (CASE), 26-30 August 2023, Auckland, New Zealand.
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Neumann, Tobias
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
T1  - Towards a mobile mapping robot for underground mines
T2  - 7th Conference of Robotics and Mechatronics : RobMech 2014 : 27th and 28th Nov. 2014, Cape Town
Y1  - 2014
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Beging, Stefan
A1  - Lowis, Carsten
A1  - Schöning, Michael Josef
T1  - Towards a multi-enzyme capacitive field-effect biosensor by comparative study of drop-coating and nano-spotting technique
JF  - Sensors
N2  - Multi-enzyme immobilization onto a capacitive field-effect biosensor by nano-spotting technique is presented. The nano-spotting technique allows to immobilize different enzymes simultaneously on the sensor surface with high spatial resolution without additional photolithographical patterning. The amount of applied enzymatic cocktail on the sensor surface can be tailored. Capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors with Ta2O5 as pH-sensitive transducer layer have been chosen to immobilize the three different (pL droplets) enzymes penicillinase, urease, and glucose oxidase. Nano-spotting immobilization is compared to conventional drop-coating method by defining different geometrical layouts on the sensor surface (fully, half-, and quarter-spotted). The drop diameter is varying between 84 µm and 102 µm, depending on the number of applied drops (1 to 4) per spot. For multi-analyte detection, penicillinase and urease are simultaneously nano-spotted on the EIS sensor. Sensor characterization was performed by C/V (capacitance/voltage) and ConCap (constant capacitance) measurements. Average penicillin, glucose, and urea sensitivities for the spotted enzymes were 81.7 mV/dec, 40.5 mV/dec, and 68.9 mV/dec, respectively.
Y1  - 2020
SN  - 1424-8220
U6  - https://doi.org/10.3390/s20174924
N1  - Special issue: Multisensor Systems and Signal Processing in Analytical Chemistry
VL  - 20
IS  - 17
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Reisert, Steffen
A1  - Geissler, Hanno
A1  - Flörke, Rudolf
A1  - Näther, Niko
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Towards a multi-sensor system for the evaluation of aseptic processes employing hydrogen peroxide vapour (H2O2)
JF  - Physica status solidi (a) : applications and material science. 208 (2011), H. 6
Y1  - 2011
SN  - 1862-6319
SP  - 1351
EP  - 1356
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Bohrn, U.
A1  - Stütz, E.
A1  - Fleischer, M.
A1  - Schöning, Michael Josef
A1  - Wagner, P.
ED  - Abdelghani, Adnane
ED  - Schöning, Michael Josef
T1  - Towards a paradigm change – mammalian cells as sensitive biosensor layers for the detection of unexpected toxic substances in air
T2  - Nanoscale Science and Technology (NS&T´12) : Proceedings Book Humboldt Kolleg ; Tunisia, 17-19 March, 2012
Y1  - 2012
SP  - 44
EP  - 44
ER  -