TY  - CHAP
A1  - Gerhards, Michael
A1  - Sander, Volker
A1  - Belloum, Adam
ED  - Zimmermann, Wolf
ED  - Lee, Yong Woo
ED  - Demchenko, Yuri
T1  - About the flexible Migration of Workflow Tasks to Clouds : Combining on- and off-premise Executions of Applications
T2  - CLOUD COMPUTING 2012 : The Third International Conference on Cloud Computing, GRIDs, and Virtualization ; July 22-27, 2012 - Nice, France
N2  - An increasing number of applications target their executions on specific hardware like general purpose Graphics Processing Units. Some Cloud Computing providers offer this specific hardware so that organizations can rent such resources. However, outsourcing the whole application to the Cloud causes avoidable costs if only some parts of the application benefit from the specific expensive hardware. A partial execution of applications in the Cloud is a tradeoff between costs and efficiency. This paper addresses the demand for a consistent framework that allows for a mixture of on- and off-premise calculations by migrating only specific parts to a Cloud. It uses the concept of workflows to present how individual workflow tasks can be migrated to the Cloud whereas the remaining tasks are executed on-premise.
KW  - Workflow Orchestration
KW  - Workflow
KW  - Grid Computing
KW  - Cloud Service Broker
KW  - Cloud Computing
Y1  - 2012
SN  - 978-1-61208-216-5
SP  - 82
EP  - 87
PB  - IARIA Journals
ER  - 
TY  - CHAP
A1  - Ganegedara, H.
A1  - Alahakoon, D.
A1  - Mashford, J.
A1  - Paplinski, A.
A1  - Müller, Karsten
A1  - Deserno, T. M.
T1  - Self organising map based region of interest labelling for automated defect identification in large sewer pipe image collections
T2  - The 2012 International Joint Conference on Neural Networks (IJCNN) : 10 - 15 June 2012, Brisbane, Australia ; [part of the] 2012 IEEE World Congress on Computational Intelligence (IEEE-WCCI 2012)
Y1  - 2012
SN  - 978-1-4673-1490-9
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Kroninger, D.
A1  - Kitajima, J.
A1  - Kazari, M.
A1  - Horikama, A.
T1  - Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications
T2  - Proceedings of ASME Turbo Expo 2012
Y1  - 2013
N1  - ASME Turbo Expo 2012, GT2012, June 11-15, 2012, Copenhagen, Denmark
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx Hydrogen combustion chamber for industrial gas turbine applications“, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
T2  - ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012
Y1  - 2012
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; (14 ; 2012.02.27-03.02 ; Honolulu, Hawaii)
ER  - 
TY  - CHAP
A1  - Fuchs, Britta
A1  - Ritz, Thomas
A1  - Strauch, Jakob
ED  - Obaidat, Mohammad S.
T1  - Usability of mobile applications : dissemination of usability engineering in small and medium enterprises
T2  - Proceedings of the International Conference on Data Communication Networking, e-Business and Optical Communication Systems : Rome, Italy, 24 - 27 July, 2012 ; [integrated in the ICETE (International Conference on e-Business and Telecommunications)]
Y1  - 2012
SN  - 978-989-8565-23-5
N1  - Nebentitel: DCNET; ICE-B; OPTICS
SP  - 272
EP  - 277
PB  - SciTePress
CY  - [Lissabon]
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Holzapfel, Gerhard A.
T1  - Effectiveness of the edge-based smoothed finite element method applied to soft biological tissues
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Application of an edge-based smoothed finite element method on geometrically non-linear plates of non-linear material
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Fricke, Barbara
A1  - Ziolko, C.
A1  - Anthrakidis, Anette
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Giese, F.
A1  - Dillig, M.
T1  - InnoSol - environmental aspects of the open volumetric receiver technology
T2  - 30th ISES Biennial Solar World Congress 2011 : : Kassel, Germany, 28 August - 2 September 2011. Vol. 5
Y1  - 2012
SP  - 3895
EP  - 3900
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
A1  - Steingröver, Markus
T1  - Wholesale Broadband Access to IPTV in an NGA environment : how to deal with it from a regulatory perspective?
Y1  - 2012
N1  - Regional ITS Conference of the international Telecommunications Society , February 22-24, 2012 New Delhi, India
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Lautermann, Mark
T1  - Towards an autonomous pilot system for a tunnel boring machine
T2  - 5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa
Y1  - 2012
SN  - 978-1-4673-5183-6
N1  - Robotics and Mechatronics Conference of South Africa <5, 2012, Johannesburg> ; ROBOMECH <5, 2012, Johannesburg>
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Feldmann, Markus
A1  - Pyschny, D.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
T1  - Life cycle assessment of steel constructions
T2  - Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012
Y1  - 2012
SN  - 978-0-203-10336-4
SP  - 321
PB  - Taylor and Francis
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Schnabel, Holger
T1  - Rapid-control-prototyping of industrial drives for the sercos automation bus
T2  - 13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan & 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)
N2  - This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.
KW  - MATLAB , MLPI , Motion control , Open Core , industrial drives , rapid control prototypin , sercos automation bus
Y1  - 2012
UR  - http://dx.doi.org/10.1109/MECATRONICS.2012.6451005
SN  - 978-1-4673-4771-6
SP  - 177
EP  - 181
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Staat, Manfred
ED  - Eberhardsteiner, J.
T1  - Numerical stability enhancement of modeling hyperelastic materials
T2  - Proceedings European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012)
Y1  - 2012
N1  - 6th European Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2012) Vienna, Austria, September 10-14, 2012
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Hunyh
A1  - Staat, Manfred
T1  - Finite Element Implementation of a 3D Fung-type Model
T2  - ESMC-2012 - 8th European Solid Mechanics Conference, Graz, Austria, July 9-13, 2012
Y1  - 2012
SN  - 978-3-85125-223-1
PB  - Verlag d. Technischen Universität Graz
CY  - Graz
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mikucki, Jill A.
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Xu, Changsheng
T1  - IceMole - a maneuverable probe for clean in-situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems : extended abstract / SCAR Open Science Conference 2012, Session 29: Advancing Clean Technologies for Exploration of Glacial Aquatic Ecosystems
N2  - The ”IceMole“ is a novel maneuverable subsurface ice probe for clean in-situ analysis and sampling of subsurface ice and subglacial water/brine. It is developed and build at FH Aachen University of Applied Sciences’ Astronautical Laboratory. A first prototype was successfully tested on the Swiss Morteratsch glacier in 2010. Clean sampling is achieved with a hollow ice screw (as it is used in mountaineering) at the tip of the probe. Maneuverability is achieved with a differentially heated melting head. Funded by the German Space Agency (DLR), a consortium led by FH Aachen currently develops a much more advanced IceMole probe, which includes a sophisticated system for obstacle avoidance, target detection, and navigation in the ice. We intend to use this probe for taking clean samples of subglacial brine at the Blood Falls (McMurdo Dry Valleys, East Antarctica) for chemical and microbiological analysis. In our conference contribution, we 1) describe the IceMole design, 2) report the results of the field tests of the first prototype on the Morteratsch glacier, 3) discuss the probe’s potential for the clean in-situ analysis and sampling of subsurface ice and subglacial liquids, and 4) outline the way ahead in the development of this technology.
KW  - Eisschicht
KW  - Sonde
KW  - subsurface ice
KW  - subglacial aquatic ecosystems
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Konstantinidis, K.
A1  - Forstner, R.
T1  - Enceladus explorer - A maneuverable subsurface probe for autonomous navigation through deep ice
T2  - 63rd International Astronautical Congress 2012, IAC 2012; Naples; Italy; 1 October 2012 through 5 October 2012. (Proceedings of the International Astronautical Congress, IAC ; 3)
Y1  - 2012
SN  - 978-1-62276-979-7
SP  - 1756
EP  - 1766
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
A1  - Sun, Q.
A1  - Meireles, I.
A1  - Matos, J.
A1  - Viseu, T.
T1  - USBR type III stilling basin performance for steep stepped spillways
T2  - Hydraulic structures into the 21st century : 4th IAHR International Symposium on Hydraulic Structures : 9.-11.2.2012, Porto
Y1  - 2012
SN  - 978-989-8509-01-7
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
T1  - Sensitivity of phase detection techniques in aerated chute flows to hydraulic design parameters
T2  - 2nd European IAHR congress : 27. - 29. June 2012, München
Y1  - 2012
SN  - 978-3-943683-03-5
SP  - Artikelkennnummer: B15
PB  - Lehrstuhl u. Versuchsanst. für Wasserbau u. Wasserwirtschaft d. TU München
CY  - München
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Stütz, Evamaria
A1  - Fleischer, Maximilian
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
T1  - Living cell-based gas sensor system for the detection of acetone in air
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - https://doi.org/10.5162/IMCS2012/3.2.3
SP  - 269
EP  - 272
ER  - 
TY  - CHAP
A1  - Bohrn, Ulrich
A1  - Mucha, Andreas
A1  - Werner, Frederik
A1  - Stütz, Evamaria
A1  - Bäcker, Matthias
A1  - Krumbe, Christoph
A1  - Schienle, Meinrad
A1  - Fleischer, Maximilian
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Detection of toxic chromium species in water using cellbased sensor systems
Y1  - 2012
SN  - 978-3-9813484-2-2
U6  - https://doi.org/10.5162/IMCS2012/P2.1.14
SP  - 1364
EP  - 1367
ER  -