TY  - JOUR
A1  - Fabo, Sabine
T1  - Marti Guixé : Parasitisierung durch das Objekt als Fata Morgana der Funktion
JF  - Kunstforum international
Y1  - 2007
SN  - 0177-3674
N1  - Ein Gespräch von Sabine Fabo
VL  - 2007
IS  - 185
SP  - 164
ER  - 
TY  - JOUR
A1  - Wolf, Martin R.
A1  - Armbruster, S.
A1  - Schlick, Christopher
A1  - Simon, S.
T1  - Marktübersicht Telekooperationssysteme / Wolf, M.; Armbruster, S.; Schlick, C.; Simon, S.
JF  - Elsa Insight (1997)
Y1  - 1997
SP  - 8
EP  - 9
PB  - -
ER  - 
TY  - JOUR
A1  - Wolf, Martin R.
A1  - Armbruster, S.
A1  - Schlick, Christopher
A1  - Simon, S.
T1  - Marktübersicht Telekooperationssysteme - Das IAW stellt im Internet umfangreiche Informationen über Telekooperationssysteme zur Verfügung / Wolf, M. ; Armbruster, S. ; Schlick, C. ; Simon, S.
JF  - FIR + IAW Mitteilungen. 29 (1997), H. 1
Y1  - 1997
SP  - 11
EP  - 12
PB  - -
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Marktentwicklung im Rapid Prototyping
JF  - Kunststoffe, München. 89 (1999), H. 11
Y1  - 1999
SN  - 0023-5563
SP  - 50
EP  - 55
ER  - 
TY  - JOUR
A1  - Holthaus-Sellheier, Ursula
A1  - Blecken, Udo
T1  - Marktdatenbasiertes Ertragsprognosemodell für die Projektentwicklung / Blecken, Udo; Holthaus, Ursula
JF  - Baubetrieb und Bauwirtschaft - Festschrift Prof. Gert Stadler
Y1  - 2004
SN  - 3-902465-09-3
SP  - 251
EP  - 269
PB  - Verlag der TU Graz
CY  - Graz
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Han, Yinhua
A1  - Offenhäusser, Andreas
A1  - Ingebrandt, Sven
T1  - Markierungsfreie DNA-Detektion mit Silizium-Feldeffekt-Sensoren – Messeffekte oder Artefakte?
JF  - tm - Technisches Messen . 74 (2007), H. 9
Y1  - 2007
SN  - 0171-8096
SP  - 466
EP  - 476
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Ehrfeld, W.
A1  - Hessel, V.
A1  - Lacher, M.
T1  - Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C.
JF  - Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1
Y1  - 1997
SN  - 0-7803-3664-X
SP  - 71
EP  - 79
PB  - IEEE Service Center
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Baumann, Marcus
A1  - Krämer, M.
T1  - Marine Planktonalgen der Arktis II. Diatomeen / Baumann, M. ; Krämer, M.
JF  - Mikrokosmos. 75 (1986), H. 10
Y1  - 1986
SN  - 0026-3680
SP  - 306
EP  - 310
ER  - 
TY  - JOUR
A1  - Baumann, Marcus
A1  - Jahnke, J.
T1  - Marine Planktonalgen der Arktis I. Die Haptophycee Phaeocystis pouchetii / Baumann, M. ; Jahnke, J.
JF  - Mikrokosmos. 75 (1986), H. 9
Y1  - 1986
SN  - 0026-3680
SP  - 262
EP  - 265
ER  - 
TY  - JOUR
A1  - Schäfer, Horst
A1  - Böttcher, A.
T1  - Mapping of magnetic domain structures inside of ferromagnetic materials by X-ray topography
JF  - Physica Status Solidi (A). 113 (1989)
Y1  - 1989
SN  - 0031-8965
SP  - 551
ER  - 
TY  - JOUR
A1  - Göttsche, Joachim
A1  - Hove, T.
T1  - Mapping global, diffuse and beam solar radiation over Zimbabwe / T. Hove ; J. Göttsche
JF  - Renewable energy. 18 (1999), H. 4
Y1  - 1999
SN  - 1879-0682
SP  - 535
EP  - 556
ER  - 
TY  - JOUR
A1  - Grotendorst, Johannes
T1  - Maple programs for converting series expansions to rational functions using the Levin transformation automatic generation of FORTRAN functions for numerical applications
JF  - Computer Physics Communications. 55 (1991), H. 3
Y1  - 1991
SN  - 0010-4655
SP  - 325
EP  - 335
ER  - 
TY  - JOUR
A1  - Otten, Dennis
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
T1  - Manufacturing Process Simulation – On Its Way to Industrial Application
JF  - International Journal of Aviation, Aeronautics, and Aerospace
N2  - Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview of the capabilities of MPS in the fields of sheet metal forming and prepreg autoclave manufacturing of composite parts summarizing the resulting benefits for tooling design and manufacturing engineering. The simulation technology is explained briefly in order to show several simplification and optimization techniques for developing industrialized simulation approaches. Small case studies provide examples of an efficient application on an industrial scale.
Y1  - 2018
U6  - https://doi.org/10.15394/ijaaa.2018.1217
SN  - 2374-6793
VL  - 5
IS  - 2
PB  - Embry-Riddle Aeronautical University
CY  - Daytona Beach, Fla.
ER  - 
TY  - JOUR
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Manual applications of adhesives
JF  - Journal of adhesion and interface
Y1  - 2006
VL  - Vol. 7
IS  - No. 4
SP  - 24
EP  - 27
ER  - 
TY  - JOUR
A1  - Schmidt, Rolf
A1  - Hebel, Christoph
T1  - Makroskopische Verkehrssimulationsmodelle in der kommunalen Planungspraxis
JF  - Stadt Region Land (2009)
Y1  - 2009
SN  - 0344-9645
SP  - 63
EP  - 72
PB  - RWTH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Hebel, Christoph
T1  - Makroskopische Personenverkehrsnachfragemodelle: Anwendungspraxis in deutschen Großstädten
JF  - Ansprüche einer mobilen Gesellschaft an ein verlässliches Verkehrssystem / hrsg. Deutsche Verkehrswissenschaftliche Gesellschaft e. V
Y1  - 2011
SN  - 978-3-942488-05-1
N1  - DVWG-Jahresband ; 2009/10
SP  - 226
EP  - 231
PB  - Dt. Verkehrswiss. Ges.
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Schmidt, Aaron C.
A1  - Turgut, Hatice
A1  - Le, Dao
A1  - Beloqui, Ana
A1  - Delaittre, Guillaume
T1  - Making the best of it: nitroxide-mediated polymerization of methacrylates via the copolymerization approach with functional styrenics
JF  - Polymer Chemistry
N2  - The SG1-mediated solution polymerization of methyl methacrylate (MMA) and oligo(ethylene glycol) methacrylate (OEGMA, Mₙ = 300 g mol⁻¹) in the presence of a small amount of functional/reactive styrenic comonomer is investigated. Moieties such as pentafluorophenyl ester, triphenylphosphine, azide, pentafluorophenyl, halide, and pyridine are considered. A comonomer fraction as low as 5 mol% typically results in a controlled/living behavior, at least up to 50% conversion. Chain extensions with styrene for both systems were successfully performed. Variation of physical properties such as refractive index (for MMA) and phase transition temperature (for OEGMA) were evaluated by comparing to 100% pure homopolymers. The introduction of an activated ester styrene derivative in the polymerization of OEGMA allows for the synthesis of reactive and hydrophilic polymer brushes with defined thickness. Finally, using the example of pentafluorostyrene as controlling comonomer, it is demonstrated that functional PMMA-b-PS are able to maintain a phase separation ability, as evidenced by the formation of nanostructured thin films.
Y1  - 2020
U6  - https://doi.org/10.1039/C9PY01458F
VL  - 11
IS  - 2
SP  - 593
EP  - 604
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Faßbender, Heinz
A1  - Bühler, Gerhard
T1  - Making a C2 information system platform independent by using internet and middleware technologies
JF  - Proceedings of the 1999 Command and Control Research and Technology Symposium, Juni 1999, Newport, USA
Y1  - 1999
SP  - 1
EP  - 11
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Loeb, H. W.
A1  - Schartner, Karl-Heinz
T1  - Main Belt Asteroid Sample Return Mission Using Solar Electric Propulsion
JF  - Acta Astronautica. 63 (2008), H. 1-4
Y1  - 2008
SN  - 0094-5765
N1  - International Astronautical Federation Congress <58, 2007, Hyderabad> ; International Astronautical Congress <58, 2007, Hyderabad> ; IAC-07-A3.5.07
SP  - 91
EP  - 101
ER  - 
TY  - JOUR
A1  - Tippkötter, Nils
A1  - Wollny, S.
A1  - Kampeis, P.
A1  - Oster, J.
A1  - Schneider, H.
A1  - Ulber, Roland
T1  - Magnetseparation von Proteinen : Separation von Zielmolekülen durch hochselektive Aptamere
JF  - GIT Labor-Fachzeitschrift
N2  - Durch die Kombination von Oligonukleotid-Liganden (Aptameren) hoher Bindungsaffinitäten
mit hochselektiv abtrennbaren magnetisierbaren Mikropartikeln
wird eine einstufige Separation von Zielmolekülen aus mikrobiologischen
Produktionsansätzen möglich. Die Aptamere werden hierfür reversibel
auf den Partikeloberflächen gebunden und für die spezifische Isolierung von
Bioprodukten eingesetzt. Die Abtrennung der beladenen Partikel erfolgt
durch einen neuen Rotor-Stator-Separator mit Hochgradient-Magnetfeld.
Y1  - 2011
VL  - 55
IS  - 10
SP  - 666
PB  - Wiley
CY  - Weinheim
ER  -