TY - JOUR A1 - Starke, Günther A1 - Drews, P. T1 - Optisch-elektronischer Nahtfuehrungssensor zur Schweissnahtverfolgung JF - Technisches Messen tm. 51 (1984), H. 7/8 Y1 - 1984 SN - 0171-8096 SP - 270 EP - 275 ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg A1 - Ahmed, Essam T1 - Optimization of laser welding of DP/TRIP steel sheets using statistical approach JF - Optics and laser technology N2 - Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions. Y1 - 2012 U6 - http://dx.doi.org/10.1016/j.optlastec.2011.06.028 SN - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print) VL - 44 IS - 1 SP - 255 EP - 262 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ahmed, Essam A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg T1 - On formability of tailor laser welded blanks of DP/TRIP steel sheets JF - Science and technology of welding and joining N2 - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed. Y1 - 2010 U6 - http://dx.doi.org/10.1179/136217110X12731414739754 SN - 1743-2936 VL - 15 IS - 5 SP - 337 EP - 342 PB - Maney CY - Leeds ER - TY - JOUR A1 - Pfaff, Raphael A1 - Burnham, Keith J. T1 - On abstraction and interpretability: a behavioural perspective JF - Systems Science Y1 - 2009 SN - 0137-1223 VL - Vol. 35 IS - Iss. 2 SP - 19 EP - 26 ER - TY - JOUR A1 - Engemann, Heiko A1 - Du, Shengzhi A1 - Kallweit, Stephan A1 - Cönen, Patrick A1 - Dawar, Harshal T1 - OMNIVIL - an autonomous mobile manipulator for flexible production JF - Sensors Y1 - 2020 SN - 1424-8220 U6 - http://dx.doi.org/10.3390/s20247249 N1 - Special issue: Sensor Networks Applications in Robotics and Mobile Systems VL - 20 IS - 24, art. no. 7249 SP - 1 EP - 30 PB - MDPI CY - Basel ER - TY - JOUR A1 - Raatschen, Hans-Jürgen A1 - Holzner, M. A1 - Borrmann, M. A1 - Pfrang, W. T1 - Numerische Simulation von Umformprozessen mit dem expliziten FE-Programm UFO-3D Y1 - 1991 N1 - Konferenz-Einzelbericht : FEM '91, International FEM-Congress, IKO Software Service, Baden Baden, D, 18.-19.11.1991 SP - 91 EP - 105 ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg A1 - Ahmed, Essam T1 - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel JF - ISIJ international Y1 - 2011 SN - 1347-5460 (E-Journal); 0915-1559 (Print) VL - Vol. 51 IS - No. 3 SP - 429 EP - 434 PB - ISIJ CY - Tōkyō ER - TY - JOUR A1 - Seiler, Friedrich A1 - Pichler, Alexander A1 - Pfaff, Raphael A1 - Srulijes, Julio T1 - Novel processing tools for automated doppler picture velocimetry (DPV) evaluation JF - Journal of visualization Y1 - 2009 SN - 1343-8875 VL - Vol. 12 IS - Iss. 4 SP - 323 EP - 337 ER - TY - JOUR A1 - Enning, Manfred A1 - Zambou, Nathan A1 - Abel, Dirk T1 - Nonlinear spacing control of following vehicles within platoon a controlled lagrangian approach / Zambou, Nathan ; Enning, Manfred ; Abel, Dirk JF - NOLCOS, IFAC Symposium on Nonlinear Control Systems Y1 - 2004 N1 - NOLCOS, 2004, IFAC Symposium on Nonlinear Control Systems, 6th, Stuttgart, DE, 2004-09-01 - 2004-09-03 SP - 1211 EP - 1216 ER - TY - JOUR A1 - Schwarz, Alexander A1 - Gebhardt, Andreas A1 - Schleser, Markus A1 - Popoola, Patricia T1 - New Welding Joint Geometries Manufactured by Powder Bed Fusion from 316L JF - Materials Performance and Characterization 8 Y1 - 2019 U6 - http://dx.doi.org/10.1520/MPC20180096 SN - 2379-1365 IS - in press ER - TY - JOUR A1 - Klocke, Martina T1 - Neue Technologien - eine Herausforderung für Klein- und Mittelbetriebe JF - CIM, Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben : [Bericht über den EUROTECNET-Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" vom 16. bis 17. Oktober 1991 in Elmshorn (BR Deutschland)] / [Bericht erstattet von Martina Klocke] Y1 - 1992 N1 - Workshop "CIM - Bedeutung für die Weiterbildung in Klein- und Mittelbetrieben" <1991, Elmshorn> SP - 6 EP - 8 PB - EUROTECNET CY - Brüssel ER - TY - JOUR A1 - Baatz, Udo A1 - Kehrmann, H. T1 - Neue Produkte - per Zufall oder mit System? JF - Jahrbuch für Führungskräfte Y1 - 1981 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Wilbring, Daniela A1 - Enning, Manfred A1 - Pfaff, Raphael A1 - Schmidt, Bernd T1 - Neue Perspektiven für die Bahn in der Produktions- und Distributionslogistik durch Prozessautomation JF - ETR - Eisenbahntechnische Rundschau Y1 - 2020 SN - 0013-2845 VL - 69 IS - 3 SP - 15 EP - 19 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Picard, Antoni A1 - Brill, Manfred A1 - Cassel, Detlef (u.a.) T1 - Neue Medien für die praktische MST Ausbildung JF - Rundschau, FH Kaiserslautern,. Ausgabe Ju (2002) Y1 - 2002 SP - 14 EP - 15 ER - TY - JOUR A1 - Gebhardt, Andreas A1 - Guntermann, P. A1 - Saur, G. A1 - Gartzen, Johannes T1 - Neue Impulse für den Leichtbau. Ein Konstruktionsprinzip für Verbauplatten mit Laserschweißen am verdeckten Stoß. JF - Laser-Praxis (1996) Y1 - 1996 SN - 0937-7069 SP - 21 EP - 24 ER - TY - JOUR A1 - Baatz, Udo T1 - Neue Aspekte der Integrierten Qualitätssicherung für Automobil - Zulieferer JF - Jahrbuch für Ingenieure Y1 - 1979 PB - Expert-Verl. CY - Grafenau, Zürich ER - TY - JOUR A1 - Starke, Günther T1 - Nahtfuehrungssensor zur adaptiven Steuerung von Handhabungseinrichtungen fuer das Lichtbogenschweissen JF - Schweissen und Schneiden. 39 (1987), H. 4 Y1 - 1987 SN - 0036-7184 SP - 191 EP - 192 ER - TY - JOUR A1 - Kallweit, Stephan A1 - Dues, Michael A1 - Radke, Michael T1 - Möglichkeiten und Grenzen laseroptischer Verfahren zur Untersuchung hydraulischer Strömungsmaschinen / Dues, Michael ; Kallweit, Stephan ; Radke, Michael JF - Forschung im Ingenieurwesen. 60 (1994), H. 11-12 Y1 - 1994 SN - 0015-7899 SP - 332 EP - 336 ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg A1 - Zabirov, Alexander A1 - Füssel, Uwe A1 - Schnick, Michael A1 - Hertel, Martin A1 - Jaeckel, Sebastian T1 - Modelling and visualisation of the GMA process JF - Welding and Cutting Y1 - 2012 SN - 1612-3433 VL - 11 IS - 4 SP - 242 EP - 249 PB - DVS Verlag CY - Düsseldorf ER - TY - JOUR A1 - Reisgen, Uwe A1 - Schleser, Markus A1 - Mokrov, Oleg A1 - Zabirov, Alexander A1 - Füssel, Uwe A1 - Schnick, Michael A1 - Hertel, Martin A1 - Jaeckel, Sebastian T1 - Modellierung und Visualisierung der MSG-Lichtbogenprozesse JF - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren Y1 - 2012 SN - 0036-7184 VL - 64 IS - 4 SP - 166 EP - 174 PB - DVS Verlag CY - Düsseldorf ER -