TY  - JOUR
A1  - Karschuck, Tobias
A1  - Schmidt, Stefan
A1  - Achtsnicht, Stefan
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multiplexing system for automated characterization of a capacitive field-effect sensor array
JF  - Physica Status Solidi A
N2  - In comparison to single-analyte devices, multiplexed systems for a multianalyte detection offer a reduced assay time and sample volume, low cost, and high throughput. Herein, a multiplexing platform for an automated quasi-simultaneous characterization of multiple (up to 16) capacitive field-effect sensors by the capacitive–voltage (C–V) and the constant-capacitance (ConCap) mode is presented. The sensors are mounted in a newly designed multicell arrangement with one common reference electrode and are electrically connected to the impedance analyzer via the base station. A Python script for the automated characterization of the sensors executes the user-defined measurement protocol. The developed multiplexing system is tested for pH measurements and the label-free detection of ligand-stabilized, charged gold nanoparticles.
KW  - Capacitive field-effect sensor
KW  - Gold nanoparticles
KW  - Label-free detection
KW  - Multicell
KW  - Multiplexing
Y1  - 2023
U6  - http://dx.doi.org/10.1002/pssa.202300265
SN  - 1862-6300 (Print)
SN  - 1862-6319 (Online)
N1  - Corresponding author: Michael Josef Schöning
VL  - 220
IS  - 22
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Jablonski, Melanie
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Wege, Christina
A1  - Schöning, Michael Josef
T1  - Detection of plant virus particles with a capacitive field-effect sensor
JF  - Analytical and Bioanalytical Chemistry
N2  - Plant viruses are major contributors to crop losses and induce high economic costs worldwide. For reliable, on-site and early detection of plant viral diseases, portable biosensors are of great interest. In this study, a field-effect SiO2-gate electrolyte-insulator-semiconductor (EIS) sensor was utilized for the label-free electrostatic detection of tobacco mosaic virus (TMV) particles as a model plant pathogen. The capacitive EIS sensor has been characterized regarding its TMV sensitivity by means of constant-capacitance method. The EIS sensor was able to detect biotinylated TMV particles from a solution with a TMV concentration as low as 0.025 nM. A good correlation between the registered EIS sensor signal and the density of adsorbed TMV particles assessed from scanning electron microscopy images of the SiO2-gate chip surface was observed. Additionally, the isoelectric point of the biotinylated TMV particles was determined via zeta potential measurements and the influence of ionic strength of the measurement solution on the TMV-modified EIS sensor signal has been studied.
KW  - Plant virus
KW  - Capacitive field-effect sensor
KW  - Tobacco mosaic virus (TMV)
KW  - Label-free detection
KW  - Zeta potential
Y1  - 2021
U6  - http://dx.doi.org/10.1007/s00216-021-03448-8
SN  - 1618-2650
N1  - Corresponding authors: Arshak Poghossian & Michael J. Schöning
VL  - 413
SP  - 5669
EP  - 5678
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Iken, Heiko
A1  - Johnen, Anna Lynn
A1  - Richstein, Benjamin
A1  - Hellmich, Lena
A1  - Poghossian, Arshak
A1  - Knoch, Joachim
A1  - Schöning, Michael Josef
T1  - Miniaturized pH-Sensitive Field-Effect Capacitors with Ultrathin Ta₂O₅ Films Prepared by Atomic Layer Deposition
JF  - physica status solidi (a) applications and materials science
N2  - Miniaturized electrolyte–insulator–semiconductor capacitors (EISCAPs) with ultrathin gate insulators have been studied in terms of their pH-sensitive sensor characteristics: three different EISCAP systems consisting of Al–p-Si–Ta2O5(5 nm), Al–p-Si–Si3N4(1 or 2 nm)–Ta2O5 (5 nm), and Al–p-Si–SiO2(3.6 nm)–Ta2O5(5 nm) layer structures are characterized in buffer solution with different pH values by means of capacitance–voltage and constant capacitance method. The SiO2 and Si3N4 gate insulators are deposited by rapid thermal oxidation and rapid thermal nitridation, respectively, whereas the Ta2O5 film is prepared by atomic layer deposition. All EISCAP systems have a clear pH response, favoring the stacked gate insulators SiO2–Ta2O5 when considering the overall sensor characteristics, while the Si3N4(1 nm)–Ta2O5 stack delivers the largest accumulation capacitance (due to the lower equivalent oxide thickness) and a higher steepness in the slope of the capacitance–voltage curve among the studied stacked gate insulator systems.
KW  - atomic layer deposition
KW  - capacitive field-effect sensors
KW  - pH sensors
KW  - ultrathin gate insulators
Y1  - 2022
U6  - http://dx.doi.org/10.1002/pssa.202100660
SN  - 1862-6319
VL  - 219
IS  - 8
PB  - Wiley-VCH
CY  - Weinheim
ER  -