TY  - CHAP
A1  - Bergmann, Ole
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Janser, Frank
T1  - Comparison and evaluation of blade element methods against RANS simulations and test data
T2  - CEAS Aeronautical Journal
N2  - This paper compares several blade element theory (BET) method-based propeller simulation tools, including an evaluation against static propeller ground tests and high-fidelity Reynolds-Average Navier Stokes (RANS) simulations. Two proprietary propeller geometries for paraglider applications are analysed in static and flight conditions. The RANS simulations are validated with the static test data and used as a reference for comparing the BET in flight conditions. The comparison includes the analysis of varying 2D aerodynamic airfoil parameters and different induced velocity calculation methods. The evaluation of the BET propeller simulation tools shows the strength of the BET tools compared to RANS simulations. The RANS simulations underpredict static experimental data within 10% relative error, while appropriate BET tools overpredict the RANS results by 15–20% relative error. A variation in 2D aerodynamic data depicts the need for highly accurate 2D data for accurate BET results. The nonlinear BET coupled with XFOIL for the 2D aerodynamic data matches best with RANS in static operation and flight conditions. The novel BET tool PropCODE combines both approaches and offers further correction models for highly accurate static and flight condition results.
KW  - BET
KW  - CFD propeller simulation
KW  - Propeller aerodynamics
KW  - Actuator disk modelling
KW  - Propeller performance
Y1  - 2022
U6  - http://dx.doi.org/10.1007/s13272-022-00579-1
SN  - 1869-5590 (Online)
SN  - 1869-5582 (Print)
N1  - Corresponding author: Ole Bergmann
VL  - 13
SP  - 535
EP  - 557
PB  - Springer
CY  - Wien
ER  - 
TY  - CHAP
A1  - Baader, Fabian
A1  - Reiswich, M.
A1  - Bartsch, M.
A1  - Keller, D.
A1  - Tiede, E.
A1  - Keck, G.
A1  - Demircian, A.
A1  - Friedrich, M.
A1  - Dachwald, Bernd
A1  - Schüller, K.
A1  - Lehmann, R.
A1  - Chojetzki, R.
A1  - Durand, C.
A1  - Rapp, L.
A1  - Kowalski, Julia
A1  - Förstner, R.
T1  - VIPER - Student research on extraterrestrical ice penetration technology
T2  - Proceedings of the 2nd Symposium on Space Educational Activities
N2  - Recent analysis of scientific data from Cassini and earth-based observations gave evidence for a global ocean under a surrounding solid ice shell on Saturn's moon Enceladus. Images of Enceladus' South Pole showed several fissures in the ice shell with plumes constantly exhausting frozen water particles, building up the E-Ring, one of the outer rings of Saturn. In this southern region of Enceladus, the ice shell is considered to be as thin as 2 km, about an order of magnitude thinner than on the rest of the moon. Under the ice shell, there is a global ocean consisting of liquid water. Scientists are discussing different approaches the possibilities of taking samples of water, i.e. by melting through the ice using a melting probe. FH Aachen UAS developed a prototype of maneuverable melting probe which can navigate through the ice that has already been tested successfully in a terrestrial environment. This means no atmosphere and or ambient pressure, low ice temperatures of around 100 to 150K (near the South Pole) and a very low gravity of 0,114 m/s^2 or 1100 μg. Two of these influencing measures are about to be investigated at FH Aachen UAS in 2017, low ice temperature and low ambient pressure below the triple point of water. Low gravity cannot be easily simulated inside a large experiment chamber, though. Numerical simulations of the melting process at RWTH Aachen however are showing a gravity dependence of melting behavior. Considering this aspect, VIPER provides a link between large-scale experimental simulations at FH Aachen UAS and numerical simulations at RWTH Aachen. To analyze the melting process, about 90 seconds of experiment time in reduced gravity and low ambient pressure is provided by the REXUS rocket. In this time frame, the melting speed and contact force between ice and probes are measured, as well as heating power and a two-dimensional array of ice temperatures. Additionally, visual and infrared cameras are used to observe the melting process.
Y1  - 2018
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Frotscher, Ralf
A1  - Staat, Manfred
T1  - Electromechanical model of hiPSC-derived ventricular cardiomyocytes cocultured with fibroblasts
T2  - 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK
N2  - The CellDrum provides an experimental setup to study the mechanical effects of fibroblasts co-cultured with hiPSC-derived ventricular cardiomyocytes. Multi-scale computational models based on the Finite Element Method are developed. Coupled electrical cardiomyocyte-fibroblast models (cell level) are embedded into reaction-diffusion equations (tissue level) which compute the propagation of the action potential in the cardiac tissue. Electromechanical coupling is realised by an excitation-contraction model (cell level) and the active stress arising during contraction is added to the passive stress in the force balance, which determines the tissue displacement (tissue level). Tissue parameters in the model can be identified experimentally to the specific sample.
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - Metrics Driven Research Collaboration: Focusing on Common Project Goals Continuously
T2  - 39th International Conference on Software Engineering, May 20-28, 2017 - Buenos Aires, Argentina
N2  - Research collaborations provide opportunities for both practitioners and researchers: practitioners need solutions for difficult business challenges and researchers are looking for hard problems to solve and publish. Nevertheless, research collaborations carry the risk that practitioners focus on quick solutions too much and that researchers tackle theoretical problems, resulting in products which do not fulfill the project requirements.
In this paper we introduce an approach extending the ideas of agile and lean software development. It helps practitioners and researchers keep track of their common research collaboration goal: a scientifically enriched software product which fulfills the needs of the practitioner’s business model.
This approach gives first-class status to application-oriented metrics that measure progress and success of a research collaboration continuously. Those metrics are derived from the collaboration requirements and help to focus on a commonly defined goal.
An appropriate tool set evaluates and visualizes those metrics with minimal effort, and all participants will be pushed to focus on their tasks with appropriate effort. Thus project status, challenges and progress are transparent to all research collaboration members at any time.
Y1  - 2017
N1  - Software Engineering in Practice (SEIP).
ICSE2017
Vorabversion der Autoren
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
A1  - Korn, Michael
A1  - Amato, Alexandre
T1  - The Passivhaus concept for the Arabian Peninsula – An energetic-economical evaluation considering the thermal comfort
T2  - QScience Proceedings: Vol 2015
N2  - The Passivhaus building standard is a concept developed for the realization of energy-efficient and economical buildings with a simultaneous high utilization comfort under European climate conditions. Major elements of the Passivhaus concept are a high thermal insulation of the external walls, the use of heat and/or solar shading glazing as well as an airtight building envelope in combination with energy-efficient technical building installations and heating or cooling generators, such as an efficient energy-recovery in the building air-conditioning. The objective of this research project is the inquiry to determine the parameters or constraints under which the Passivhaus concept can be implemented under the arid climate conditions in the Arabian Peninsula to achieve an energy-efficient and economical building with high utilization comfort. In cooperation between the Qatar Green Building Council (QGBC), Barwa Real Estate (BRE) and Kahramaa the first Passivhaus was constructed in Qatar and on the Arabian Peninsula in 2013. The Solar-Institut Jülich of Aachen University of Applied Science supports the Qatar Green Building Council with a dynamic building and equipment simulation of the Passivhaus and the neighbouring reference building. This includes simulation studies with different component configurations for the building envelope and different control strategies for heating or cooling systems as well as the air conditioning of buildings to find an energetic-economical optimum. Part of these analyses is the evaluation of the energy efficiency of the used energy recovery system in the Passivhaus air-conditioning and identification of possible energy-saving effects by the use of a bypass function integrated in the heat exchanger. In this way it is expected that on an annual basis the complete electricity demand of the building can be covered by the roof-integrated PV generator.
Y1  - 2015
U6  - http://dx.doi.org/10.5339/qproc.2015.qgbc.38
N1  - 10.5339/qproc.2015.qgbc.38 = abstract -
Qatar Green Building Conference 2015 - The Vision, 38.
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Towards trade facilitation via regulatory convergence: An analysis of the TTIP chapter on Electronic Communications
T2  - Regional ITS Conference of the International Telecommunications Society. Cambridge, United Kingdom, 7-9 September 2016
N2  - To give the exchange of goods and services between the European Union (EU) and the United States (U.S.) new momentum the two parties are currently negotiating the transatlantic free trade agreement Transatlantic Trade and Investment Partnership (TTIP). The aim is to create the largest free trade area in the world. The agreement, once entered into force, will oblige EU countries and the U.S. to further liberalize their markets.
The negotiations on TTIP include a chapter on Electronic Communications/ Telecommunications. The challenge therein will be securing commitments for market access to Electronic Communications services. At the same time, these commitments must reflect the legitimate need for consumer protection issues. The need to reduce Electronic Communications-related non-tariff barriers to trade between the Parties is due to the fact that these markets are heavily regulated. Without transnational rules as to regulations national governments can abuse these regulations to deter the market entry by new (foreign) suppliers. Thus the free trade agreement TTIP affects in many respects regulatory provisions on and access to Electronic Communications markets. The objective of this paper is therefore to examine to what extend the regulatory principles for Electronic Communications markets envisaged under TTIP will result in trade facilitation and regulatory convergence between the EU and the U.S.
As to this question the result of the analysis is that the chapter on Electronic Communications will be an important step towards facilitating trade in Electronic Communications services. At the same time some regulatory convergence will take place, but this convergence will not lead to a (full) harmonization of regulations. Rather the norm, also after TTIP negotiations will have been concluded successfully, will be mutual recognition of different regulatory regimes. Different regulations being the optimal policy response in different market settings will continue to exist. Moreover, it is very unlikely that such regulatory principles for the Electronic Communications sector are a vehicle for a race to the bottom in levels of consumer protection.
KW  - regulation
KW  - liberalisation
KW  - electronic communications markets
KW  - TTIP
Y1  - 2016
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Duong, Minh Tuan
T1  - Smoothed Finite Element Methods for Nonlinear Solid Mechanics Problems: 2D and 3D Case Studies
T2  - Proceedings of the National Science and Technology Conference on Mechanical - Transportation Engineering (NSCMET 2016), 13th October 2016, Hanoi, Vietnam, Vol.2
N2  - The Smoothed Finite Element Method (SFEM) is presented as an edge-based and a facebased techniques for 2D and 3D boundary value problems, respectively. SFEMs avoid shortcomings of the standard Finite Element Method (FEM) with lower order elements such as overly stiff behavior, poor stress solution, and locking effects. Based on the idea of averaging spatially the standard strain field of the FEM over so-called smoothing domains SFEM calculates the stiffness matrix for the same number of degrees of freedom (DOFs) as those of the FEM. However, the SFEMs significantly improve accuracy and convergence even for distorted meshes and/or nearly incompressible materials.
Numerical results of the SFEMs for a cardiac tissue membrane (thin plate inflation) and an artery (tension of 3D tube) show clearly their advantageous properties in improving accuracy particularly for the distorted meshes and avoiding shear locking effects.
Y1  - 2016
SP  - 440
EP  - 445
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Jung, Alexander
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Papadrakakis, M.
T1  - A 3D electromechanical FEM-based model for cardiac tissue
T2  - ECCOMAS Congress 2016, VII European Congress on Computational Methods in Applied Sciences and Engineering. Crete Island, Greece, 5–10 June 2016
Y1  - 2016
N1  - revised after the conference
P11367
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
A1  - Renault, Philippe
T1  - Simulation of impact-loads on reinforced concrete structural elements
T2  - 22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Kubalski, Thomas
T1  - Seismic response of conventional and base-isolated liquid storage tanks
T2  - International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Nonlinear behaviour of masonry under cyclic loading
T2  - 7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
T1  - Seismic vulnerability assessment of bridges
T2  - First Munich Bridge Assessment Conference, MBAC 2005 : Munich, 20.-25. June 2005
Y1  - 2005
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kuhlmann, Winfried
A1  - Lopez, M.
A1  - Fernandez, S.
T1  - Seismic vulnerability assessment of the Aachen Cathedral based on measurements and numerical simulations
T2  - International Conference on Earthquake Engineering to mark 40 years from Catastrophic 1963 Skopje Earthquake, Skopje 2003
Y1  - 2003
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Butenweg, Christoph
A1  - Kuhlmann, Wolfram
T1  - Technical information system for collaborative material research
T2  - Sixth International Conference on Computational Structures Technology : [Prague, Czech Republic, 4 - 6 September 2002]
Y1  - 2002
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Dalguer, Luis A.
A1  - Renault, Philippe
A1  - Churilov, Sergey
A1  - Butenweg, Christoph
T1  - Evaluation of fragility curves for a three-storey-reinforced-concrete mock-up of SMART 2013 project
T2  - Transactions, SMiRT-23 : 23rd Conference on Structural Mechanics in Reactor Technology : Manchester, United Kingdom - August 10-14, 2015
Y1  - 2016
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Michaux, Frank
A1  - Kallweit, Stephan
A1  - Maeda, Kazuhiro
T1  - Unsteady flow measurements in the wake behind a wind-tunnel car model by using high-speed planar PIV
T2  - 11TH International Symposium on Particle Image Velocimetry – PIV15 Santa Barbara, California, September 14-16, 2015
N2  - This study investigates unsteady characteristics of the wake behind a 28%-scale car model in a wind tunnel using highspeed planar particle image velocimetry (PIV). The car model is based on a hatchback passenger car that is known to have relatively high fluctuations in its aerodynamic loads. This study primarily focuses on the lateral motion of the flow on the horizontal plane to determine the effect of the flow motion on the straight-line stability and the initial steering response of the actual car on a track. This paper first compares the flow fields in the wake behind the above mentioned model obtained using conventional and high-speed planar PIV, with sampling frequencies of 8 Hz and 1 kHz, respectively. Large asymmetrically coherent flow structures, which fluctuate at frequencies below 2 Hz, are observed in the results of highspeed PIV measurements, whereas conventional PIV is unable to capture these features of the flow owing to aliasing. This flow pattern with a laterally swaying motion is represented by opposite signs of cross-correlation coefficients of streamwise velocity fluctuations for the two sides of the car model. Effects of two aerodynamic devices that are known to reduce the
fluctuation levels of the aerodynamic loads are then extensively investigated. The correlation analyses reveal that these devices indeed reduce the fluctuation levels of the flow and the correlation values around the rear combination-lamp, but it is found that the effects of these devices are different around the c-pillar.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Booysen, Tracy
A1  - Mathew, Thomas
A1  - Knox, Greig
A1  - Fong, W. K.
A1  - Stüttgen, Marcel
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - The Scarab Project
T2  - ICRA 2015 Developing Countries Forum
N2  - Urban Search and Rescue (USAR) is an active research
field in the robotics community. Despite recent advances
for many open research questions, these kind of systems are
not widely used in real rescue missions. One reason is that such
systems are complex and not (yet) very reliable; another is that
one has to be an robotic expert to run such a system. Moreover,
available rescue robots are very expensive and the benefits of
using them are still limited.
In this paper, we present the Scarab robot, an alternative
design for a USAR robot. The robot is light weight, humanpackable
and its primary purpose is that of extending the
rescuer’s capability to sense the disaster site. The idea is that a
responder throws the robot to a certain spot. The robot survives
the impact with the ground and relays sensor data such as
camera images or thermal images to the responder’s hand-held
control unit from which the robot can be remotely controlled.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center
T2  - ICRA 2015 Developing Countries Forum
N2  - Mechatronics consist of the integration of mechanical
engineering, electronic integration and computer science/
engineering. These broad fields are essential for robotic
systems, yet it makes it difficult for the researchers to specialize
and be experts in all these fields. Collaboration between
researchers allow for the integration of experience and specialization,
to allow optimized systems. Collaboration between the
European countries and South Africa is critical, as each country
has different resources available, which the other countries
might not have. Applications with the need for approval of
any restrictions, can also be obtained easier in some countries
compared to others, thus preventing the delays of research.
Some problems that have been experienced are discussed, with
the Robotics Center of South Africa as a possible solution.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Ferrein, Alexander
A1  - Reuter, Sebastian
A1  - Jeschke, Sabina
A1  - Lakemeyer, Gerhard
T1  - The RoboCup Logistics League as a Holistic Multi-Robot Smart Factory Benchmark
T2  - Proceedings of the IROS 2015 Open forum on evaluation of results, replication of experiments and benchmarking in robotics research
N2  - With autonomous mobile robots receiving increased
attention in industrial contexts, the need for benchmarks
becomes more and more an urgent matter. The RoboCup
Logistics League (RCLL) is one specific industry-inspired scenario
focusing on production logistics within a Smart Factory.
In this paper, we describe how the RCLL allows to assess the
performance of a group of robots within the scenario as a
whole, focusing specifically on the coordination and cooperation
strategies and the methods and components to achieve them.
We report on recent efforts to analyze performance of teams in
2014 to understand the implications of the current grading
scheme, and derived criteria and metrics for performance
assessment based on Key Performance Indicators (KPI) adapted
from classic factory evaluation. We reflect on differences and
compatibility towards RoCKIn, a recent major benchmarking
European project.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Bühler, P.
A1  - Leandro, J.
A1  - Bung, Daniel B.
A1  - Lopes, P.
A1  - Carvalho, R.
T1  - Measuring void fraction of a stepped spillway with non-intrusive methods using different image resolutions
T2  - 2nd International Workshop on Hydraulic Structures : Data Validation : Coimbra, Portugal, 8-9 May 2015
Y1  - 2015
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Gregorio, Fabrizio de
A1  - Fatigati, Giovanni
A1  - Kallweit, Stephan
T1  - Tiltrotor airframe flow field characterization by SPIV
T2  - 11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - Robots: challenges, chances and risks for solving 21st century problems
T2  - President’s Invitation Lecture / South African Institute of Electrical Engineers : May 21 & 22, 2015, University of Johannesburg
Y1  - 2015
SP  - 1
EP  - 45
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Staat, Manfred
ED  - Nithiarasu, Perumal
T1  - Homogenization of a cardiac tissue construct
T2  - CMBE15 : 4th International Conference on Computational & Mathematical Biomedical Engineering ; 29th June - 1st July 2015 ; École Normale Supérieure de Cachan ; Cachan (Paris), France
Y1  - 2015
SN  - 2227-9385
N1  - Konferenzband unter:
http://www.compbiomed.net/getfile.php?type=12/site_documents&id=Proceedings_2227-9385_compressed.pdf
SP  - 645
EP  - 648
PB  - CMBE
CY  - [s.l.]
ER  - 
TY  - CHAP
A1  - Kronhardt, Valentina
A1  - Alexopoulos, Spiros
A1  - Reißel, Martin
A1  - Latzke, Markus
A1  - Rendon, C.
A1  - Sattler, Johannes, Christoph
A1  - Herrmann, Ulf
T1  - Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant Jülich using optimized control strategies of the storage system
T2  - Energy procedia
Y1  - 2015
SN  - 1876-6102
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Bonney, Gregor
A1  - Höfken, Hans-Wilhelm
A1  - Paffen, Benedikt
A1  - Schuba, Marko
T1  - ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC
T2  - 1st International Conference on Information Systems Security and Privacy : ICISSP 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
T1  - Observations on non-aerated flow and air entrainment on moderately sloped stepped spillways
T2  - 7th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : 8. - 12. Sept. 2014, Hannover
Y1  - 2014
N1  - Kennwortgeschützter Zugang. Passwort bei Prof. Bung, Fachbereich Bauingenieurwesen
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A face-based smoothed finite element method for hyperelastic models and tissue growth
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Sora, M.-C.
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
ED  - Onate, E.
T1  - Optimization of the flight style in ski jumping
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
N1  - Das Paper wurde nach der Konferenz überarbeitet.
SP  - 799
EP  - 810
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Evaluation of a computational model for drug action on cardiac tissue
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Puterman, Moshe
T1  - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics
T2  - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007
Y1  - 2007
SN  - 978-89-9600450-9
SP  - 725
EP  - 733
PB  - Kangwoon National Univ.
CY  - Chancheon
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Gries, Thomas
A1  - Glowania, Michael
T1  - Impregnated textile reinforcements for concrete applications
T2  - European Coatings Congress : Nürnberg, Germany, 30.3. - 1.4. 2009
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Sedlacek, G.
A1  - Geßler, A.
A1  - Schleser, Markus
A1  - Mund, F.
A1  - Völling, B.
T1  - Verbindungen vorgefertigter Textilbetonbauteile
T2  - Textile reinforced structures : proceedings of the 2nd Colloquium on Textile Reinforced Structures (CTRS2), Dresden, Germany, 29.9. - 1.10.2003
Y1  - 2003
SN  - 3-86005-386-8
SP  - 481
EP  - 493
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Böhm, Stefan
ED  - Czarnecki, Lech
ED  - Garbacz, Andrzej
T1  - Improvement of textile reinforced concrete by use of polymers
T2  - Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)
Y1  - 2007
SN  - 978-3-931681-89-0
SP  - 153
EP  - 162
PB  - Aedificatio Publ.
CY  - Freiburg
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - A new method to determine suitable spacings and distances for self-tapping screws
T2  - Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures
N2  - The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.
Y1  - 2010
SN  - 1864-1784
N1  - Paper 43-21-2
VL  - 43
PB  - Lehrstuhl für Ingenieurholzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
ED  - Cecotti, A.
T1  - Determining Suitable Spacings and Distances for Self-tapping Screws by Experimental and Numerical Studies
T2  - Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010
Y1  - 2010
N1  - Extended abstract. Full paper: DVD, Session 55, ID 108, 9 Seiten
SP  - 669
EP  - 670
ER  - 
TY  - CHAP
A1  - Burgazzi, L.
A1  - Fiorini, F.
A1  - De Magistris, W. (u.a.)
A1  - Lensa, W. von
A1  - Staat, Manfred
A1  - Altes, J.
T1  - Reliability Assessment of Passive Safety Systems
T2  - Proceedings of the 6th International Conference on Nuclear Engineering : ICONE : May 10 - 14, 1998, San Diego, Calif.
Y1  - 1998
N1  - CD-ROM
PB  - American Society of Mechanical Engineers
CY  - New York
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Some peculiarities of application of cluster ions generated by plasma in respect of indoor air purification :[abstract]
N2  - Recently, the SHARP Corporation, Japan, has developed the world’s first "Plasma Cluster Ions (PCI)" air purification technology using plasma discharge to generate cluster ions. The new plasma cluster device releases positive and negative ions into the air, which are able to decompose and deactivate harmful airborne substances by chemical reactions. Because cluster ions consist of positive and negative ions that normally exist in the natural world, they are completely harmless and safe to humans. The amount of ozone generated by cluster ions is less than 0.01 ppm, which is significantly less than the 0.05-ppm standard for industrial operations and consumer electronics. This amount, thus, has no harming effects whatsoever on the human body. But particular properties and chemical processes in PCI treatment are still under study. It has been shown that PCI in most cases show strongly pronounced irreversible killing effects in respect of airborne microflora due to free-radical induced reactions and can be considered as a potent technology to disinfect both home, medical and industrial appliances.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Effects of plasma generated ions on bacteria : [poster]
N2  - Summary and Conclusions PCIs were clearly effective in terms of their antibacterial effects with the strains tested. This efficacy increased with the time the bacteries were exposed to PCIs. The bactericidal action has proved to be irreversible. PCIs were significantly less effective in shadowed areas. PCI exposure caused multiple protein damages as observed in SDS PAGE studies. There was no single but multiple molecular mechanism causing the bacterial death.
KW  - Clusterion
KW  - Bakterien
KW  - plasma generated ions
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
A1  - Nojima, H.
T1  - Plasma cluster ions (PCI) influence on microbial cells viability : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first “Plasma Cluster Ions (PCI)” air purification technology, which uses plasma discharge to generate cluster ions. The new plasma cluster device releases into the air positive and negative ions, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. A lot of phenomenological tests of the PCI air purification technology on microbial cells have been conducted. And, in most cases, it has been shown that PCI demonstrate strongly pronounced killing effect. Although, the particular mechanisms of PCI action are still not evident. We studied variations in resistance to PCI among gram-positive airborne microorganisms, as well as some dose-dependent, spatial, cultural and biochemical properties of PCI action in respect of Staphylococcus spp, Enterococcus spp, Micrococcus spp.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
A1  - Nojima, H.
A1  - Artmann, Gerhard
T1  - Plasma-generated cluster ions' effects on indoor microflora : [abstract]
N2  - Recently, SHARP corporation has developed the world’s first "Plasma Cluster Ions® (PCI)" air purification technology, which uses plasma discharge to generate cluster ions. The new Plasma Cluster Device releases positive and negative ions into the air, which are harmless to humans and are able to decompose and deactivate airborne substances by chemical reactions. In the past, phenomenological tests on the efficacy of the PCI air purification technology on microbial cells have been conducted. In most cases, it has been shown that PCI demonstrated strongly pronounced killing effects on microorganisms. However, the particular mechanisms of PCI action still have to be uncovered.
KW  - Clusterion
KW  - Raumluft
KW  - Luftreiniger
KW  - Plasmacluster ion technology
KW  - Air purification
Y1  - 2003
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Demirci, Taylan
A1  - Trzewik, Jürgen
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Fibroblast response to mechanical stress: role of the adhesion substrate : [abstract]
N2  - Mechanical stimulation of the cells resulted in evident changes in the cell morphology, protein composition and gene expression. Microscopically, additional formation of stress fibers accompanied by cell re-arrangements in a monolayer was observed. Also, significant activation of p53 gene was revealed as compared to control. Interestingly, the use of CellTech membrane coating induced cell death after mechanical stress had been applied. Such an effect was not detected when fibronectin had been used as an adhesion substrate.
KW  - Fibroblast
KW  - Mechanische Beanspruchung
KW  - celldrum technology
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zerlin, Kay
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Zaccai, Joe
A1  - Büldt, Georg
T1  - Temperature transitions of hemoglobin and cytosolic water diffusion in human red blood cells : [poster]
N2  - Background Hemoglobin interactions in red blood cells Hemoglobin dynamics in human red blood cells Diffusion of H2O in red blood cells
KW  - Erythrozyt
KW  - Hämoglobin
KW  - cytosolic water diffusion
KW  - hemoglobin dynamics
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Mansurov, Zulkhair
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
A1  - Savitskaja, Irina S.
A1  - Kozhalakova, A. A.
A1  - Kistaubaeva, Aida S.
T1  - The sorption of LPS toxic shock by nanoparticles on base of carbonized vegetable raw materials
N2  - Immobilization of lactobacillus on high temperature carbonizated vegetable raw material (rice husk, grape stones) increases their physiological activity and the quantity of the antibacterial metabolits, that consequently lead to increase of the antagonistic activity of lactobacillus. It is implies that the use of the nanosorbents for the attachment of the probiotical microorganisms are highly perspective for decision the important problems, such as the probiotical preparations delivery to the right address and their attachment to intestines mucosa with the following detoxication of gastro-intestinal tract and the normalization of it’s microecology. Besides that, thus, the received carbonizated nanoparticles have peculiar properties – ability to sorption of LPS toxical shock and, hence, to the detoxication of LPS.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Dachwald, Bernd
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Funke, O.
T1  - A concept of a probe for particle analysis and life detection in icy environments
N2  - A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa’s ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.
KW  - Sonde
KW  - Eisschicht
KW  - Autofluoreszenzverfahren
KW  - Lichtstreuungsbasierte Instrumente
KW  - autofluorescence-based detection system
KW  - light scattering analysis
Y1  - 2009
ER  -