TY  - JOUR
A1  - Karschuck, Tobias
A1  - Poghossian, Arshak
A1  - Ser, Joey
A1  - Tsokolakyan, Astghik
A1  - Achtsnicht, Stefan
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Capacitive model of enzyme-modified field-effect biosensors: Impact of enzyme coverage
JF  - Sensors and Actuators B: Chemical
N2  - Electrolyte-insulator-semiconductor capacitors (EISCAP) belong to field-effect sensors having an attractive transducer architecture for constructing various biochemical sensors. In this study, a capacitive model of enzyme-modified EISCAPs has been developed and the impact of the surface coverage of immobilized enzymes on its capacitance-voltage and constant-capacitance characteristics was studied theoretically and experimentally. The used multicell arrangement enables a multiplexed electrochemical characterization of up to sixteen EISCAPs. Different enzyme coverages have been achieved by means of parallel electrical connection of bare and enzyme-covered single EISCAPs in diverse combinations. As predicted by the model, with increasing the enzyme coverage, both the shift of capacitance-voltage curves and the amplitude of the constant-capacitance signal increase, resulting in an enhancement of analyte sensitivity of the EISCAP biosensor. In addition, the capability of the multicell arrangement with multi-enzyme covered EISCAPs for sequentially detecting multianalytes (penicillin and urea) utilizing the enzymes penicillinase and urease has been experimentally demonstrated and discussed.
KW  - Field-effect biosensor
KW  - Capacitive model
KW  - Enzyme coverage
KW  - Multianalyte detection
KW  - Penicillin
Y1  - 2024
U6  - http://dx.doi.org/10.1016/j.snb.2024.135530
SN  - 0925-4005 (Print)
SN  - 1873-3077 (Online)
N1  - Corresponding Author: Michael J. Schöning
VL  - 408
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Karschuck, Tobias
A1  - Schmidt, Stefan
A1  - Achtsnicht, Stefan
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multiplexing system for automated characterization of a capacitive field-effect sensor array
JF  - Physica Status Solidi A
N2  - In comparison to single-analyte devices, multiplexed systems for a multianalyte detection offer a reduced assay time and sample volume, low cost, and high throughput. Herein, a multiplexing platform for an automated quasi-simultaneous characterization of multiple (up to 16) capacitive field-effect sensors by the capacitive–voltage (C–V) and the constant-capacitance (ConCap) mode is presented. The sensors are mounted in a newly designed multicell arrangement with one common reference electrode and are electrically connected to the impedance analyzer via the base station. A Python script for the automated characterization of the sensors executes the user-defined measurement protocol. The developed multiplexing system is tested for pH measurements and the label-free detection of ligand-stabilized, charged gold nanoparticles.
KW  - Capacitive field-effect sensor
KW  - Gold nanoparticles
KW  - Label-free detection
KW  - Multicell
KW  - Multiplexing
Y1  - 2023
U6  - http://dx.doi.org/10.1002/pssa.202300265
SN  - 1862-6300 (Print)
SN  - 1862-6319 (Online)
N1  - Corresponding author: Michael Josef Schöning
VL  - 220
IS  - 22
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Kassab, T.
A1  - Han, Y.
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Offenhäusser, A.
A1  - Schöning, Michael Josef
T1  - Detection of layerby-layer adsorbed polyelectrolytes by means of field-effect based capacitive EIS structures
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1034
EP  - 1035
ER  - 
TY  - JOUR
A1  - Katz, Evgeny
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Enzyme-based logic gates and circuits - analytical applications and interfacing with electronics
JF  - Analytical and Bioanalytical Chemistry
N2  - The paper is an overview of enzyme-based logic gates and their short circuits, with specific examples of Boolean AND and OR gates, and concatenated logic gates composed of multi-step enzyme-biocatalyzed reactions. Noise formation in the biocatalytic reactions and its decrease by adding a “filter” system, converting convex to sigmoid response function, are discussed. Despite the fact that the enzyme-based logic gates are primarily considered as components of future biomolecular computing systems, their biosensing applications are promising for immediate practical use. Analytical use of the enzyme logic systems in biomedical and forensic applications is discussed and exemplified with the logic analysis of biomarkers of various injuries, e.g., liver injury, and with analysis of biomarkers characteristic of different ethnicity found in blood samples on a crime scene. Interfacing of enzyme logic systems with modified electrodes and semiconductor devices is discussed, giving particular attention to the interfaces functionalized with signal-responsive materials. Future perspectives in the design of the biomolecular logic systems and their applications are discussed in the conclusion.
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s00216-016-0079-7
SN  - 1618-2650
VL  - 409
SP  - 81
EP  - 94
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Keusgen, M.
A1  - Jünger, M.
A1  - Knobbe, D.-T.
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Entwicklung eines potentiometrischen Cyanid-Biosensors auf der Basis von EIS-Strukturen
JF  - Sensoren für zukünftige Hochtechnologien und Neuentwicklungen für die Verfahrenstechnik / 6. Dresdner Sensor-Symposium, 8. - 10. Dezember 2003, Dresden. Jörg Peter Baselt; Gerald Gerlach (Hg.)
Y1  - 2003
SN  - 3-935712-92-8
SP  - 235
EP  - 238
PB  - w.e.b.-Univ.-Verl.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Keusgen, M.
A1  - Jünger, M.
A1  - Krest, I.
A1  - Schöning, Michael Josef
T1  - Development of a biosensor specific for cysteine sulfoxides
JF  - Biosensors & Bioelectronics. 18 (2003), H. 5-6
Y1  - 2003
SN  - 0956-5663
SP  - 805
EP  - 812
ER  - 
TY  - JOUR
A1  - Keusgen, M.
A1  - Jünger, M.
A1  - Schöning, Michael Josef
T1  - Biosensoric detection of the cysteine sulphoxide alliin
JF  - Book of abstracts / ed. by J. Saneistr.
Y1  - 2002
SN  - 80-01-02576-4
N1  - Eurosensors ; (16, 2002, Praha)
SP  - 1175
EP  - 1178
PB  - Czech Technical University, Faculty of Electrical Engineering, Department of Measurement
CY  - Prague
ER  - 
TY  - JOUR
A1  - Keusgen, M.
A1  - Kloock, Joachim P.
A1  - Knobbe, D.-T.
A1  - Jünger, M.
A1  - Krest, I.
A1  - Goldbach, M.
A1  - Klein, W.
A1  - Schöning, Michael Josef
T1  - Direct determination of cyanides by potentiometric biosensors
JF  - Sensors and Actuators B. 103 (2004), H. 1-2
Y1  - 2004
SN  - 0925-4005
SP  - 380
EP  - 385
ER  - 
TY  - JOUR
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Strategies for biosensoric detection of potential drugs in nature
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1004
EP  - 1005
ER  - 
TY  - JOUR
A1  - Keusgen, Michael
A1  - Jünger, Martina
A1  - Krest, Ingo
A1  - Schöning, Michael Josef
T1  - Biosensoric detection of the cysteine sulphoxide alliin
JF  - Sensors and Actuators B. 95 (2003), H. 1-3
Y1  - 2003
SN  - 0925-4005
SP  - 297
EP  - 302
ER  - 
TY  - JOUR
A1  - Khaydukova, M. M.
A1  - Zadorozhnaya, O. A.
A1  - Kirsanov, D. O.
A1  - Iken, Heiko
A1  - Rolka, David
A1  - Schöning, Michael Josef
A1  - Babain, V. A.
A1  - Vlasov, Yu. G.
A1  - Legin, A. V.
T1  - Multivariate processing of atomic-force microscopy images for detection of the response of plasticized polymeric membranes
JF  - Russian journal of applied chemistry
N2  - The possibility of using the atomic-force microscopy as a method for detection of the analytical signal from plasticized polymeric sensor membranes was analyzed. The surfaces of cadmium-selective membranes based on two polymeric matrices were examined. The digital images were processed with multivariate image analysis techniques. A correlation was found between the surface profile of an ion-selective membrane and the concentration of the ion in solution.
Y1  - 2014
U6  - http://dx.doi.org/10.1134/S1070427214030112
SN  - 1608-3296 (E-Journal); 1070-4272 (Print)
VL  - 87
IS  - 3
SP  - 307
EP  - 314
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - CHAP
A1  - Kirchner, Patrick
A1  - Henkel, H.
A1  - Näther, Niko
A1  - Spelthahn, H.
A1  - Schneider, A.
A1  - Berger, J.
A1  - Kolstad, J.
A1  - Friedrich, P.
A1  - Schöning, Michael Josef
T1  - RFID-basiertes Sensorsystem zur Realisierung intelligenter Verpackungen für die Nahrungsmittelindustrie
T2  - KMU - innovativ: IKT 2008. CD-ROM : BMBF-Statustagung KMU - innovativ: IKT, Darmstadt, 17. - 18. Nov. 2008
Y1  - 2008
IS  - CD-ROM-Ausg.
PB  - BMBF
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Li, B.
A1  - Spelthahn, H.
A1  - Henkel, H.
A1  - Friedrich, P.
A1  - Kolstad, J.
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Thin-film calorimetric H2O2 gas sensor for the validation of germicidal effectivity in aseptic filling processes
JF  - Procedia Chemistry. 1 (2009), H. 1
Y1  - 2009
SN  - 1876-6196
N1  - Proceedings of the Eurosensors XXIII conference ; Eurosensors 23
SP  - 983
EP  - 986
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Li, B.
A1  - Spelthahn, H.
A1  - Henkel, H.
A1  - Schneider, A.
A1  - Kolstad, J.
A1  - Friedrich, P.
A1  - Schöning, Michael Josef
T1  - Realisierung eines miniaturisierten Gassensors in Chiptechnologie basierend auf einer Dünnschicht-Thermosäule zur H2O2-Detektion in aseptischen Abfüllanlagen
JF  - 9. Dresdner Sensor-Symposium : Dresden, 07.-09. Dezember 2009 / Gerlach, Gerald ; Hauptmann, Peter [Hrsg.]
Y1  - 2009
SN  - 978-3-941298-44-6
N1  - Dresdner Sensor-Symposium ; (9, 2009, Dresden)
SP  - 293
EP  - 296
PB  - TUDpress
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Li, Bin
A1  - Spelthahn, Heiko
A1  - Henkel, Hartmut
A1  - Schneider, Andreas
A1  - Friedrich, Peter
A1  - Kolstad, Jens
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Thin-film calorimetric H2O2 gas sensor for the validation of germicidal effectivity in aseptic filling processes
JF  - Sensors and Actuators B: Chemical. 154 (2011), H. 2
Y1  - 2011
SN  - 1873-3077
N1  - EUROSENSORS XXIII
SP  - 257
EP  - 263
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Friedrich, Peter
A1  - Berger, Jörg
A1  - Rysstad, Gunnar
A1  - Schöning, Michael Josef
A1  - Keusgen, Michael
T1  - Realisation of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry
JF  - Sensors and Actuators B: Chemical
N2  - A calorimetric gas sensor is presented for the monitoring of vapour-phase H2O2 at elevated temperature during sterilisation processes in aseptic food industry. The sensor was built up on a flexible polyimide foil (thickness: 25 μm) that has been chosen due to its thermal stability and low thermal conductivity. The sensor set-up consists of two temperature-sensitive platinum thin-film resistances passivated by a layer of SU-8 photo resist and catalytically activated by manganese(IV) oxide. Instead of an active heating structure, the calorimetric sensor utilises the elevated temperature of the evaporated H2O2 aerosol. In an experimental test rig, the sensor has shown a sensitivity of 4.78 °C/(%, v/v) in a H2O2 concentration range of 0%, v/v to 8%, v/v. Furthermore, the sensor possesses the same, unchanged sensor signal even at varied medium temperatures between 210 °C and 270 °C of the gas stream. At flow rates of the gas stream from 8 m3/h to 12 m3/h, the sensor has shown only a slightly reduced sensitivity at a low flow rate of 8 m3/h. The sensor characterisation demonstrates the suitability of the calorimetric gas sensor for monitoring the efficiency of industrial sterilisation processes.
KW  - Sterilisation process
KW  - Hydrogen peroxide
KW  - Polyimide
KW  - Calorimetric gas sensor
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.snb.2011.01.032
SN  - 0925-4005
N1  - Part of special issue "Eurosensors XXIV, 2010"
VL  - 170
SP  - 60
EP  - 66
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Friedrich, Peter
A1  - Berger, Jörg
A1  - Suso, Henri-Pierre
A1  - Kupyna, Andriy
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Optimisation and fabrication of a calorimetric gas sensor built up on a polyimide substrate for H2O2 monitoring
JF  - Physica status solidi (a) : applications and material science. 208 (2011), H. 6
Y1  - 2011
SN  - 1862-6319
SP  - 1235
EP  - 1240
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Friedrich, Peter
A1  - Rysstad, G.
A1  - Berger, J.
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Realization of a calorimetric gas sensor on polyimide foil for applications in aseptic food industry
JF  - Procedia Engineering. 5 (2010)
Y1  - 2010
SN  - 1877-7058
N1  - Eurosensor XXIV Conference
SP  - 264
EP  - 267
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Suco, Henri-Pierre
A1  - Rysstad, Gunnar
A1  - Schöning, Michael Josef
T1  - Monitoring the microbicidal effectiveness of gaseous hydrogen peroxide in sterilisation processes by means of a calorimetric gas sensor
JF  - Food control
N2  - In the present work, a novel method for monitoring sterilisation processes with gaseous H2O2 in combination with heat activation by means of a specially designed calorimetric gas sensor was evaluated. Therefore, the sterilisation process was extensively studied by using test specimens inoculated with Bacillus atrophaeus spores in order to identify the most influencing process factors on its microbicidal effectiveness. Besides the contact time of the test specimens with gaseous H2O2 varied between 0.2 and 0.5 s, the present H2O2 concentration in a range from 0 to 8% v/v (volume percent) had a strong influence on the microbicidal effectiveness, whereas the change of the vaporiser temperature, gas flow and humidity were almost negligible. Furthermore, a calorimetric H2O2 gas sensor was characterised in the sterilisation process with gaseous H2O2 in a wide range of parameter settings, wherein the measurement signal has shown a linear response against the H2O2 concentration with a sensitivity of 4.75 °C/(% v/v). In a final step, a correlation model by matching the measurement signal of the gas sensor with the microbial inactivation kinetics was established that demonstrates its suitability as an efficient method for validating the microbicidal effectiveness of sterilisation processes with gaseous H2O2.
KW  - hydrogen peroxide
KW  - sterilisation
KW  - Bacillus atrophaeus
KW  - calorimetric gas sensor
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.foodcont.2012.11.048
SN  - 0956-7135
VL  - 31
IS  - 2
SP  - 530
EP  - 538
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Oberländer, Jan
A1  - Suso, Henri-Pierre
A1  - Rysstad, Gunnar
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Towards a wireless sensor system for real-time H2O2 monitoring in aseptic food processes
JF  - Physica status solidi (a)
N2  - A wireless sensor system based on the industrial ZigBee standard for low-rate wireless networking was developed that enables real-time monitoring of gaseous H2O2 during the package sterilization in aseptic food processes. The sensor system consists of a remote unit connected to a calorimetric gas sensor, which was already established in former works, and an external base unit connected to a laptop computer. The remote unit was built up by an XBee radio frequency (RF) module for data communication and a programmable system-on-chip controller to read out the sensor signal and process the sensor data, whereas the base unit is a second XBee RF module. For the rapid H2O2 detection on various locations inside the package that has to be sterilized, a novel read-out strategy of the calorimetric gas sensor was established, wherein the sensor response is measured within the short sterilization time and correlated with the present H2O2 concentration. In an exemplary measurement application in an aseptic filling machinery, the suitability of the new, wireless sensor system was demonstrated, wherein the influence of the gas velocity on the H2O2 distribution inside a package was determined and verified with microbiological tests.
KW  - calorimetric gas sensor;hydrogen peroxide;wireless sensor system
Y1  - 2013
U6  - http://dx.doi.org/10.1002/pssa.201200920
SN  - 1862-6319
VL  - 210
IS  - 5
SP  - 877
EP  - 883
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Reisert, Steffen
A1  - Pütz, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Characterisation of polymeric materials as passivation layer for calorimetric H2O2 gas sensors
JF  - Physica Status Solidi (a)
N2  - Calorimetric gas sensors for monitoring the H₂O₂ concentration at elevated temperatures in industrial sterilisation processes have been presented in previous works. These sensors are built up in form of a differential set-up of a catalytically active and passive temperature-sensitive structure. Although, various types of catalytically active dispersions have been studied, the passivation layer has to be established and therefore, chemically as well as physically characterised. In the present work, fluorinated ethylene propylene (FEP), perfluoralkoxy (PFA) and epoxy-based SU-8 photoresist as temperature-stable polymeric materials have been investigated for sensor passivation in terms of their chemical inertness against H₂O₂, their hygroscopic properties as well as their morphology. The polymeric materials were deposited via spin-coating on the temperature-sensitive structure, wherein spin-coated FEP and PFA show slight agglomerates. However, they possess a low absorption of humidity due to their hydrophobic surface, whereas the SU-8 layer has a closed surface but shows a slightly higher absorption of water. All of them were inert against gaseous H₂O₂ during the characterisation in H₂O₂ atmosphere that demonstrates their suitability as passivation layer for calorimetric H₂O₂ gas sensors.
Y1  - 2012
U6  - http://dx.doi.org/10.1002/pssa.201100773
SN  - 1862-6319
VL  - 209
IS  - 5
SP  - 859
EP  - 863
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Kirchner, Patrick
A1  - Spelthahn, H.
A1  - Schöning, Michael Josef
A1  - Henkel, H.
A1  - Schneider, A.
A1  - Friedrich, P.
A1  - Kolstad, J.
A1  - Berger, J.
T1  - Realisierung eines Polyimid-basierten kalorimetrischen Gassensors zur Inline-Überwachung der H2O2-Konzentration in aseptischen Abfüllanlagen
JF  - Sensoren und Messsysteme 2010 [Elektronische Ressource] : Vorträge der 15. ITG/GMA-Fachtagung vom 18. bis 19. Mai 2010 in Nürnberg / Informationstechnische Gesellschaft im VDE (ITG); VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)
Y1  - 2010
SN  - 978-3-8007-3260-9
N1  - Fachtagung Sensoren und Messsysteme 15, 2010, Nürnberg ; Gesellschaft Mess- und Automatisierungstechnik
SP  - 607
EP  - 612
PB  - VDE Verlag
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Moreno, Lia
A1  - Bratov, A.
A1  - Huachupoma, S.
A1  - Xu, J.
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Ermolenko, Y.
A1  - Vlasov, Y. G.
A1  - Schöning, Michael Josef
T1  - PLD-prepared cadmium sensors based on chalcogenide glasses —ISFET, LAPS and μISE semiconductor structures
JF  - Sensors and Actuators B: Chemical. 118 (2006), H. 1-2
Y1  - 2006
SN  - 0925-4005
N1  - Eurosensors XIX - Eurosensors XIX - The 19th European Conference on Solid-State Transducers
SP  - 149
EP  - 155
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Moreno, Lia
A1  - Huachupoma, S.
A1  - Xu, J.
A1  - Wagner, Torsten
A1  - Bratov, A.
A1  - Doll, T.
A1  - Vlasov, Y.
A1  - Schöning, Michael Josef
ED  - Gerlach, Gerald
T1  - Halbleiterbasierte Schwermetallsensorik auf der Basis von Chalkogenidgläsern für zukünftige „Lab on Chip“-Anwendungen
T2  - 7. Dresdner Sensor-Symposium - Neue Herausforderungen und Anwendungen in der Sensortechnik
Y1  - 2005
SN  - 3-938863-29-3
SP  - 221
EP  - 224
PB  - TUDpress, Verl. der Wissenschaften
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Mourzina, Y.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Schöning, Michael Josef
T1  - Pulsed laser deposition: A tool for fabricating thin-film microsensors
JF  - Biomedizinische Technik. 49 (2004), H. 2
Y1  - 2004
SN  - 0932-4666
SP  - 1032
EP  - 1033
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Mourzina, Y.G.
A1  - Ermolenko, Y.
A1  - Doll, T.
A1  - Schubert, J.
A1  - Schöning, Michael Josef
T1  - Inorganic thin-film sensor membranes with PLD-prepared chalcogenide glasses: Challenges and implementation
JF  - Sensors. 4 (2004), H. 10
Y1  - 2004
SN  - 1424-8220
SP  - 156
EP  - 162
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Mourzina, Y.G.
A1  - Yoshinobu, T.
A1  - Schubert, J.
A1  - Schöning, Michael Josef
T1  - Chalkogenidglassensoren für die Schwermetallanalytik
JF  - Sensoren und Mess-Systeme : Vorträge der 11. ITG/GMA-Fachtagung vom 11. bis 12. März 2002 in Ludwigsburg / Veranst.: Informationstechnische Gesellschaft im VDE (ITG) ... Wiss. Tagungsleitung: C. D. Kohl ....
Y1  - 2002
SN  - 3-8007-2675-0
N1  - Sensoren und Mess-Systeme 2002
SP  - 395
EP  - 398
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Poghossian, Arshak
A1  - Schumacher, K.
A1  - Rosenkranz, C.
A1  - Schultze, J. W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Funktionsprüfung und Charakterisierung von ionensensitiven Feldeffekttransistoren (ISFETs) auf Waferebene mittels Mikrotropfenzelle für den zukünftigen Einsatz in der Sensorproduktion
JF  - Sensoren und Messsysteme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14. März 2006 in Freiburg/Breisgau / Veranst.: Informationstechnische Gesellschaft im VDE (ITG) ; VDE/VDI-Gesellschaft Mess- und Automatisierungstechnik (GMA). Wiss. Tagungsleitung: L. M. Reindl
Y1  - 2006
SN  - 3-8007-2939-3
N1  - Fachtagung Sensoren und Messsysteme <13, 2006, Freiburg, Breisgau>
SP  - 257
EP  - 260
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schubert, J.
A1  - Ermelenko, Y.
A1  - Vlasov, Y. G.
A1  - Bratov, A.
A1  - Schöning, Michael Josef
T1  - Thin-film sensors with chalcogenide glass materials – a general survey
T2  - Biochemical sensing utilisation of micro- and nanotechnologies : Warsaw, [23rd - 26th] November 2005 / ed. by M. Mascini ...
Y1  - 2006
SP  - 92
EP  - 97
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Kloock, Joachim P.
A1  - Schöning, Michael Josef
T1  - Heavy metal detection with semiconductor devices based on PLD-prepared chalcogenide glass thin films
T2  - Armenian Journal of Physics
Y1  - 2007
SN  - 1829-1171
SP  - 95
EP  - 98
ER  - 
TY  - JOUR
A1  - Knobbe, D.-T.
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
A1  - Mourzina, Y.
T1  - Charakterisierung von kapazitiven EMISSensoren mittels Impedanzspektroskopie, Kapazitäts-Spannungs- und Konstant-Kapazitäts-Messung
JF  - Sensoren und Messsysteme 2004 : Tagung Ludwigsburg, 15. und 16. März 2004 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik
Y1  - 2004
SN  - 3-18-091829-2
N1  - Auch erschienen als: VDI-Berichte ; 1829
SP  - 851
EP  - 854
PB  - VDI
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Koch, Claudia
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Wege, Christian
T1  - Penicillin Detection by Tobacco Mosaic Virus-Assisted Colorimetric Biosensors
JF  - Nanotheranostics
N2  - The presentation of enzymes on viral scaffolds has beneficial effects such as an increased enzyme loading and a prolonged reusability in comparison to conventional immobilization platforms. Here, we used modified tobacco mosaic virus (TMV) nanorods as enzyme carriers in penicillin G detection for the first time. Penicillinase enzymes were conjugated with streptavidin and coupled to TMV rods by use of a bifunctional biotin-linker. Penicillinase-decorated TMV particles were characterized extensively in halochromic dye-based biosensing. Acidometric analyte detection was performed with bromcresol purple as pH indicator and spectrophotometry. The TMV-assisted sensors exhibited increased enzyme loading and strongly improved reusability, and higher analysis rates compared to layouts without viral adapters. They extended the half-life of the sensors from 4 - 6 days to 5 weeks and thus allowed an at least 8-fold longer use of the sensors. Using a commercial budget-priced penicillinase preparation, a detection limit of 100 µM penicillin was obtained. Initial experiments also indicate that the system may be transferred to label-free detection layouts.
Y1  - 2018
U6  - http://dx.doi.org/10.7150/ntno.22114
SN  - 2206-7418
VL  - 2
IS  - 2
SP  - 184
EP  - 196
PB  - Ivyspring
CY  - Sydney
ER  - 
TY  - CHAP
A1  - Koch, Claudia
A1  - Poghossian, Arshak
A1  - Wege, Christina
A1  - Schöning, Michael Josef
ED  - Wege, Christina
T1  - TMV-Based Adapter Templates for Enhanced Enzyme Loading in Biosensor Applications
T2  - Virus-Derived Nanoparticles for Advanced Technologies
N2  - Nanotubular tobacco mosaic virus (TMV) particles and RNA-free lower-order coat protein (CP) aggregates have been employed as enzyme carriers in different diagnostic layouts and compared for their influence on biosensor performance. In the following, we describe a label-free electrochemical biosensor for improved glucose detection by use of TMV adapters and the enzyme glucose oxidase (GOD). A specific and efficient immobilization of streptavidin-conjugated GOD ([SA]-GOD) complexes on biotinylated TMV nanotubes or CP aggregates was achieved via bioaffinity binding. Glucose sensors with adsorptively immobilized [SA]-GOD, and with [SA]-GOD cross-linked with glutardialdehyde, respectively, were tested in parallel on the same sensor chip. Comparison of these sensors revealed that TMV adapters enhanced the amperometric glucose detection remarkably, conveying highest sensitivity, an extended linear detection range and fastest response times. These results underline a great potential of an integration of virus/biomolecule hybrids with electronic transducers for applications in biosensorics and biochips. Here, we describe the fabrication and use of amperometric sensor chips combining an array of circular Pt electrodes, their loading with GOD-modified TMV nanotubes (and other GOD immobilization methods), and the subsequent investigations of the sensor performance.
KW  - Tobacco mosaic virus (TMV)
KW  - Coat protein
KW  - Enzyme nanocarrier
KW  - Glucose biosensor
KW  - Glucose oxidase
Y1  - 2018
SN  - 978-1-4939-7808-3
U6  - http://dx.doi.org/10.1007/978-1-4939-7808-3
N1  - Methods in Molecular Biology, vol 1776
SP  - 553
EP  - 568
PB  - Humana Press
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Kramer, Friederike
A1  - Halamkova, Lenka
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
A1  - Halamek, Jan
T1  - Biocatalytic analysis of biomarkers for forensic identification of ethnicity between Caucasian and African American
JF  - The analyst. August 2013
Y1  - 2013
SN  - 1364-5528 (E-Journal); 0003-2654 (Print)
VL  - Vol. 138
SP  - 6251
EP  - 6257
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Kreyer, Jörg
A1  - Stollenwerk, Dominik
A1  - Schöning, Michael Josef
T1  - Tagung des Forschernachwuchses der FH Aachen 20. November 2013 / ed.: J. Kreyer, D. Stollenwerk, M. J. Schöning
Y1  - 2013
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Krämer, Melina
A1  - Pita, Marcos
A1  - Zhou, Jian
A1  - Ornatska, Maryna
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - Coupling of Biocomputing Systems with Electronic Chips: Electronic Interface for Transduction of Biochemical Information
JF  - Journal of Physical Chemistry C: Nanomaterials and Interfaces. 113 (2009), H. 6
Y1  - 2009
SN  - 1932-7455
SP  - 2573
EP  - 2579
PB  - American Cemical Society
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Kurowski, A.
A1  - Schultze, J.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Micro- and nanopatterning of sensor chips by means of macroporous silicon.
JF  - Sensors and Actuators B. 83 (2002), H. 1-3
Y1  - 2002
SN  - 0925-4005
N1  - Selected Papers from TRANSDUCERS '01 EUROSENSORS XV
SP  - 123
EP  - 128
ER  - 
TY  - JOUR
A1  - Kurowski, A.
A1  - Schultze, J.W.
A1  - Lüth, H.
A1  - Schöning, Michael Josef
T1  - Micro- and nanopatterning of sensor chips by means of macroporous silicon
JF  - Transducers '01 Eurosensors XV : digest of technical papers / the 11th International Conference on Solid-State Sensors and Actuators, June 10-14, 2001, Munich, Germany. Ernst Obermeier (Ed.)
Y1  - 2001
SN  - 3-540-42150-5
N1  - Eurosensors (15, 2001, München) ; International Conference on Solid State Sensors and Actuators (11, 2001, München)
SP  - 640
EP  - 643
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Leinhos, Marcel
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Micromachined multi-parameter sensor chip for the control of polymer-degradation medium
JF  - Physica Status Solidi (A) : special issue on engineering and functional interfaces
N2  - It is well known that the degradation environment can strongly influence the biodegradability and kinetics of biodegradation processes of polymers. Therefore, besides the monitoring of the degradation process, it is also necessary to control the medium in which the degradation takes place. In this work, a micromachined multi-parameter sensor chip for the control of the polymer-degradation medium has been developed. The chip combines a capacitive field-effect pH sensor, a four-electrode electrolyte-conductivity sensor and a thin-film Pt-temperature sensor. The results of characterization of individual sensors are presented. In addition, the multi-parameter sensor chip together with an impedimetric polymer-degradation sensor was simultaneously characterized in degradation solutions with different pH and electrolyte conductivity. The obtained results demonstrate the feasibility of the multi-parameter sensor chip for the control of the polymer-degradation medium.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/pssa.201330364
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1346
EP  - 1351
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Lüth, H.
A1  - Thust, M.
A1  - Steffen, A.
A1  - Kordos, P.
A1  - Schöning, Michael Josef
T1  - Biochemical sensors with structured and porous silicon capacitors
JF  - Materials Science and Engineering B. 69-70 (2000)
Y1  - 2000
SN  - 0921-5107
SP  - 104
EP  - 108
ER  - 
TY  - JOUR
A1  - Malzahn, Kerstin
A1  - Windmiller, Joshua Ray
A1  - Valdés-Ramírez, Gabriela
A1  - Wang, Joseph
A1  - Schöning, Michael Josef
T1  - Wearable electrochemical sensors for in situ analysis in marine environments
JF  - Analyst. 136 (2011), H. 14
Y1  - 2011
SN  - 0003-2654
SP  - 2912
EP  - 2917
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Ichimura, H.
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Schöning, Michael Josef
T1  - Chemical Imaging of ion Diffusion in a Microfluidic Channel
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a chemical sensor which is capable of visualizing the spatial distribution of chemical species in sample solution. In this study, a novel measurement system based on the chemical imaging sensor was developed to observe the inside of a Y-shaped microfluidic channel while injecting two sample solutions from two branches. From the collected chemical images, it was clearly observed that the injected solutions formed laminar flows in the microfluidic channel. In addition, ion diffusion across the laminar flows was observed. This label-free method can acquire quantitative data of ion distribution and diffusion in microfluidic devices, which can be used to determine the diffusion coefficients, and therefore, the molecular weights of chemical species in the sample solution.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.proeng.2012.09.289
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 886
EP  - 889
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Kuwabara, Yohei
A1  - Kanoh, Shin'ichiro
A1  - Yoshinobu, Tatsuo
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Chemical image scanner based on FDM-LAPS
JF  - Sensors and Actuators B: Chemical. 137 (2009), H. 2
Y1  - 2009
SN  - 0925-4005
SP  - 533
EP  - 538
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Seki, K.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Enhancement of the spatial resolution of the chemical imaging sensor by a hybrid fiber-optic illumination
JF  - Procedia Engineering
N2  - The chemical imaging sensor, which is based on the principle of the light-addressable potentiometric sensor (LAPS), is a powerful tool to visualize the spatial distribution of chemical species on the sensor surface. The spatial resolution of this sensor depends on the diffusion of photocarriers excited by a modulated light. In this study, a novel hybrid fiber-optic illumination was developed to enhance the spatial resolution. It consists of a modulated light probe to generate a photocurrent signal and a ring of constant light, which suppresses the lateral diffusion of minority carriers excited by the modulated light. It is demonstrated that the spatial resolution was improved from 92 μm to 68 μm.
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.proeng.2014.11.563
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 612
EP  - 615
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, K.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, T.
T1  - Multi-well structure for cell culture on the chemical imaging sensor
Y1  - 2011
N1  - 2011 16th International Solid-State Sensors, Actuators and Microsystems Conference (TRANSDUCERS) , Date: 5-9 June 2011
SP  - 2130
EP  - 2132
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Bing, Yu
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Visualization of Defects on a Cultured Cell Layer by Utilizing Chemical Imaging Sensor
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) inthe sample. In this study, a novel wound-healing assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the defect of a cell layer brought into proximity of the sensing surface.A reduced impedance inside the defect, which was artificially formed ina cell layer, was successfully visualized in a photocurrent image.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.806
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 936
EP  - 939
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Hayashi, Kosuke
A1  - Sakamoto, Azuma
A1  - Werner, Frederik
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - A high-Q resonance-mode measurement of EIS capacitive sensor by elimination of series resistance
JF  - Sensor and Actuators B: Chemical
N2  - An EIS capacitive sensor is a semiconductor-based potentiometric sensor, which is sensitive to the ion concentration or pH value of the solution in contact with the sensing surface. To detect a small change in the ion concentration or pH, a small capacitance change must be detected. Recently, a resonance-mode measurement was proposed, in which an inductor was connected to the EIS capacitive sensor and the resonant frequency was correlated with the pH value. In this study, the Q factor of the resonant circuit was enhanced by canceling the internal resistance of the reference electrode and the internal resistance of the inductor coil with the help of a bypass capacitor and a negative impedance converter, respectively. 1% variation of the signal in the developed system corresponded to a pH change of 3.93 mpH, which was about 1/12 of the conventional method, suggesting a better performance in detection of a small pH change.
KW  - Negative impedance convertor
KW  - Resonance-mode measurement
KW  - Chemical sensor
KW  - EIS capacitive sensor
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.snb.2017.03.002
SN  - 0925-4005
VL  - 248
SP  - 1006
EP  - 1010
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Hirayama, Yuji
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Visualization of enzymatic reaction in a microfluidic channel using chemical imaging sensor
JF  - Electrochimica acta
Y1  - 2013
SN  - 1873-3859 (E-Journal); 0013-4686 (Print)
SP  - Publ. online
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Ichimura, Hiroki
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Chemical imaging of the concentration profile of ion diffusion in a microfluidic channel
JF  - Sensors and actuators. B: Chemical
N2  - The chemical imaging sensor is a device to visualize the spatial distribution of chemical species based on the principle of LAPS (light-addressable potentiometric sensor), which is a field-effect chemical sensor based on semiconductor. In this study, the chemical imaging sensor has been applied to investigate the ion profile of laminar flows in a microfluidic channel. The chemical images (pH maps) were collected in a Y-shaped microfluidic channel while injecting HCl and NaCl solutions into two branches. From the chemical images, it was clearly observed that the injected solutions formed laminar flows in the channel. In addition, ion diffusion across the laminar flows was observed, and the diffusion coefficient could be derived by fitting the pH profiles to the Fick's equation.
Y1  - 2013
U6  - http://dx.doi.org/10.1016/j.snb.2013.04.057
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
N1  - Part of special issue "Selected Papers from the 26th European Conference on Solid-State Transducers"
VL  - 189
SP  - 240
EP  - 245
PB  - Elsevier
CY  - Amsterdam
ER  -