TY  - JOUR
A1  - Spelthahn, Heiko
A1  - Schaffrath, Sophie
A1  - Coppe, Thomas
A1  - Rufi, Frederic
A1  - Schöning, Michael Josef
T1  - Development of an electrolyte-insulator-semiconductor (EIS) based capacitive heavy metal sensor for the detection of Pb2+ und Cd2+ ions
JF  - Physica status solidi (a) : applications and material science
N2  - Chalcogenide glass materials as membranes for potentiometric sensors for chemical analysis in solutions have been studied since more than 20 years. In this work, an electrolyte–insulator–semiconductor structure was combined with chalcogenide glass membranes prepared by means of the pulsed laser deposition technique. Depending on the membrane composition a selectivity to different ions (Cd2+ and Pb2+) is achieved. The different sensor membranes have been physically characterised using microscopy, ellipsometry, profilometry, atomic force microscopy (AFM), scanning electron microscopy (SEM) and Rutherford backscattering spectrometry (RBS). The electrochemical behaviour has been investigated via capacitance/voltage (C/V) and constant capacitance (ConCap) measurements and results in a Cd2+ sensitivity of 23.1 ± 0.6 mV per decade in a linear range from 7 × 10−6 to 10−2 mol/l and 24.4 ± 0.5 mV per decade in a linear range from 5 × 10−6 to 10−2 mol/l for Pb2+, respectively.
Y1  - 2010
U6  - https://doi.org/10.1002/pssa.200983306
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
VL  - 207
IS  - 4
SP  - 930
EP  - 934
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Gerhards, Michael
A1  - Belloum, Adam
A1  - Berretz, Frank
A1  - Sander, Volker
A1  - Skorupa, Sascha
T1  - A history-tracing XML-based provenance framework for workflows
JF  - The 5th Workshop on Workflows in Support of Large-Scale Science
N2  - The importance of validating and reproducing the outcome of computational processes is fundamental to many application domains. Assuring the provenance of workflows will likely become even more important with respect to the incorporation of human tasks to standard workflows by emerging standards such as WS-HumanTask. This paper addresses this trend by an actor-based workflow approach that actively support provenance. It proposes a framework to track and store provenance information automatically that applies for various workflow management systems. In particular, the introduced provenance framework supports the documentation of workflows in a legally binding way. The authors therefore use the concept of layered XML documents, i.e. history-tracing XML. Furthermore, the proposed provenance framework enables the executors (actors) of a particular workflow task to attest their operations and the associated results by integrating digital XML signatures.
KW  - workflow
KW  - provenance
KW  - framework
KW  - containers
KW  - humans
KW  - synchronization
KW  - libraries
KW  - history
KW  - concrete
KW  - XML
Y1  - 2010
SN  - 978-1-4244-8989-3
U6  - https://doi.org/10.1109/WORKS.2010.5671873
N1  - The 5th Workshop on Workflows in Support of Large-Scale Science, 14 Nov. 2010, New Orleans, USA
PB  - IEEE
CY  - New York
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Pedraza, A. M.
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
T1  - Label-free DNA hybridization and denaturation detection by means of field-effect nanoplate SOI capacitors functionalized with gold nanoparticles
JF  - Procedia Engineering
N2  - A new approach for a label-free electrical detection of DNA hybridization and denaturation using an array of individually addressable field-effect nanoplate SOI (silicon-on-insulator) capacitors functionalized with gold nanoparticles is presented. By using a constant-capacitance measuring setup in a differential mode, signal changes of ∼110 mV and ∼70 mV have been registered after the DNA hybridization and denaturation events, respectively.
Y1  - 2010
U6  - https://doi.org/10.1016/j.proeng.2010.09.259
SN  - 1877-7058
N1  - Eurosensor XXIV Conference, 5-8 September 2010, Linz, Austria
VL  - 5
SP  - 918
EP  - 921
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Berretz, Frank
A1  - Skorupa, Sascha
A1  - Sander, Volker
A1  - Belloum, Adam
T1  - Towards an actor-driven workflow management system for grids
JF  - Proceedings of 2010 International Symposium on Collaborative Technologies and Systems
N2  - Currently, most workflow management systems in Grid environments provide push-oriented job distribution strategies, where jobs are explicitly delegated to resources. In those scenarios the dedicated resources execute submitted jobs according to the request of a workflow engine or Grid wide scheduler. This approach has various limitations, particularly if human interactions should be integrated in workflow execution. To support human interactions with the benefit of enabling inter organizational computation and community approaches, this poster paper proposes the idea of a pull-based task distribution strategy. Here, heterogeneous resources, including human interaction, should actively select tasks for execution from a central repository. This leads to special demands regarding security issues like access control. In the established push-based job execution the resources are responsible for granting access to workflows and job initiators. In general this is done by access control lists, where users are explicitly mapped to local accounts according to their policies. In the pull-based approach the resources actively apply for job executions by sending requests to a central task repository. This means that every resource has to be able to authenticate against the repository to be authorized for task execution. In other words the authorization is relocated from the resources to the repository. The poster paper introduces current work regarding to the mentioned security aspects in the pull-based approach within the scope of the project “HiX4AGWS”.
KW  - scheduling
KW  - engines
KW  - resource management
KW  - grid computing
KW  - access control
KW  - distribution strategy
KW  - authorization
KW  - security
KW  - humans
KW  - workflow management software
Y1  - 2010
SN  - 978-1-4244-6619-1
U6  - https://doi.org/10.1109/CTS.2010.5478458
N1  - 2010 International Symposium on Collaborative Technologies and Systems, 17-21 May 2010, Chicago, IL, USA
SP  - 611
EP  - 616
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Wagner, Torsten
A1  - Werner, Frederik
A1  - Miyamoto, Ko-ichiro
A1  - Ackermann, Hans-Josef
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - FPGA-based LAPS device for the flexible design of sensing sites on functional interfaces
JF  - Physica Status Solidi (A)
N2  - The development of new interfaces for (bio-)chemical sensors requires comprehensive analyses and testing. The light-addressable potentiometric sensor (LAPS) can be used as a platform to investigate the sensitivity of a newly developed interface towards (bio-)chemical agents. LAPS measurements are spatially resolved by utilisation of focused light beams to define individual measurement spots. In this work, a new digitally modulated LAPS set-up based on an FPGA design will be introduced to increase the number of measurement spots, to shorten the measurement time and to improve the measurement accuracy.
Y1  - 2010
U6  - https://doi.org/10.1002/pssa.200983320
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
VL  - 207
IS  - 4
SP  - 844
EP  - 849
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Hirschfeld, Julian A.
A1  - Lustfeld, Hans
A1  - Reißel, Martin
A1  - Steffen, Bernhard
T1  - A novel scheme for precise diagnostics and effective stabilization of currents in a fuel cell stack
JF  - International Journal of Energy Research
N2  - A novel scheme for detecting inhomogeneous internal currents in a fuel cell stack is presented. In this paper the scheme is investigated for the case that the flow field plates consist of graphite. Then plates of high conductivity, e.g. aluminium between the flow field plates together with small slits in these plates have three effects: (a) Whenever a local inhomogeneity of the electric current occurs at a particular cell in the stack, this will induce a surface current close to that cell perpendicular to the averaged current. This current can be detected. (b) The plates of high conductivity completely prevent the inhomogeneities from spreading to neighbouring cells. (c) Even at the particular cell the inhomogeneity is suppressed as far as possible. Thus this scheme leads to much better diagnostic possibilities and at the same time reduces electric instabilities to an extent, where they probably become harmless. This scheme will first be explained for a simple model to clarify the idea. However, very precise three dimensional computations using realistic parameters are presented, corroborating the results of the simple model.
Y1  - 2010
U6  - https://doi.org/10.1002/er.1662
SN  - 0363-907X
VL  - 34
IS  - 3
SP  - 293
EP  - 301
PB  - Wiley
CY  - London
ER  - 
TY  - JOUR
A1  - Hirschfeld, Julian A.
A1  - Lustfeld, Hans
A1  - Reißel, Martin
A1  - Steffen, Bernhard
T1  - Tomographic diagnostics of current distributions in a fuel cell stack
JF  - International Journal of Energy Research
N2  - A novel tomographic scheme for analysing the state of any single membrane electrode assembly (MEA) in a stack is suggested. Plates of very high conductivity placed between every fuel cell and slitted in an appropriate manner cause surface currents at well-defined locations of the stack. We show that knowing these surface currents, information about anomalies of the currents in a MEA can be obtained using the methods of tomography. The results are mathematically not unique. However, when assuming plausible defect structures, one can exclude improbable deficiencies by applying a special form of simulated annealing. We present numerical calculations of typical examples demonstrating that the essential defects of the MEA in any single cell of the stack can be detected and their extent can be determined.
Y1  - 2010
U6  - https://doi.org/10.1002/er.1634
SN  - 0363-907X
VL  - 34
IS  - 3
SP  - 284
EP  - 292
PB  - Wiley
CY  - London
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Sponagel, Stefan
A1  - Nguyen, Nhu Huynh
T1  - Experiment and material model for soft tissue materials
JF  - Constitutive  models for rubber VI : proceedings of the sixth European Conference on Constitutive Models for Rubber, Dresden, Germany, 7 - 10 September 2009 / eds. Gert Heinrich ...
Y1  - 2010
SN  - 978-0-415-56327-7
SP  - 465
EP  - 470
PB  - CRC Press
CY  - Boca Raton [u.a.]
ER  - 
TY  - JOUR
A1  - Pham, Phu Tinh
A1  - Vu, Khoi Duc
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - A primal-dual algorithm for shakedown analysis of elastic-plastic bounded linearly kinematic hardening bodies
Y1  - 2010
N1  - ECCM 2010, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Nguyen, N.-H.
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
T1  - A hyperelastic model of biological tissue materials in tubular organs
Y1  - 2010
N1  - ECCM 2010, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.
SP  - 1
EP  - 12
ER  - 
TY  - JOUR
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Shakedown analysis of two dimensional structures by an edge-based smoothed finite element method
Y1  - 2010
N1  - ECCM 2010, IV European Conference on Computational Mechanics, Paris, France, May 16-21, 2010.
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Wenmackers, Sylvia
A1  - Janssens, Stoffel D.
A1  - Haenen, Ken
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Capacitive field-effect (bio-)chemical sensors based on nanocrystalline diamond films
JF  - Diamond Electronics and Bioelectronics — Fundamentals to Applications III, edited by P. Bergonzo, [u.a.]
Y1  - 2010
N1  - MRS Proceedings Volume 1203 paper 1203-J17-31 ; Mater. Res. Soc. Sympos. Proc. Vol 1203 (2010) ; Materials Research Society
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Reisert, Steffen
A1  - Henkel, Hartmut
A1  - Schneider, Andreas
A1  - Schäfer, Daniel
A1  - Friedrich, Peter
A1  - Berger, Jörg
A1  - Schöning, Michael Josef
T1  - Development of a handheld sensor system for the online measurement of hydrogen peroxide in aseptic filling systems
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 913
EP  - 918
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Sugawara, Yuri
A1  - Kanoh, Shin´ichiro
A1  - Yoshinobu, Tatsuo
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Image correction method for the chemical imaging sensor
JF  - Sensors and Actuators B: Chemical. 144 (2010), H. 2
Y1  - 2010
N1  - 22nd International Conference on Eurosensors - Dresden, Germany, 7-10 September 2008 ; Eurosensors ; (22, 2008, Dresden)
SP  - 344
EP  - 348
ER  - 
TY  - JOUR
A1  - Beging, Stefan
A1  - Mlynek, Daniela
A1  - Hataihimakul, Sudkanung
A1  - Poghossian, Arshak
A1  - Baldsiefen, Gerhard
A1  - Busch, Heinz
A1  - Laube, Norbert
A1  - Kleinen, Lisa
A1  - Schöning, Michael Josef
T1  - Field-effect calcium sensor for the determination of the risk of urinary stone  formation
JF  - Sensors and Actuators B: Chemical. 144 (2010), H. 2
Y1  - 2010
N1  - 22nd International Conference on Eurosensors - Dresden, Germany, 7-10 September 2008 ; Eurosensors ; (22, 2008, Dresden)
SP  - 374
EP  - 379
ER  - 
TY  - JOUR
A1  - Abouzar, Maryam H.
A1  - Poghossian, Arshak
A1  - Siqueira, José R. Jr.
A1  - Oliveira, Osvaldo N. Jr.
A1  - Moritz, Werner
A1  - Schöning, Michael Josef
T1  - Capacitive electrolyte-insulator-semiconductor structures functionalised with a polyelectrolyte/enzyme multilayer: New strategy for enhanced field-effect biosensing
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 884
EP  - 890
ER  - 
TY  - JOUR
A1  - Schöning, Michael Josef
A1  - Kirchner, Patrick
A1  - Ng, Yue Ann
A1  - Spelthahn, Heiko
A1  - Schneider, Andreas
A1  - Henkel, Hartmut
A1  - Friedrich, Peter
A1  - Kolstad, Jens
A1  - Berger, Jörg
A1  - Keusgen, Michael
T1  - Gas sensor investigation based on a catalytically activated thin-film thermopile for H2O2 detection
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 787
EP  - 792
ER  - 
TY  - JOUR
A1  - Turek, Monik
A1  - Heiden, Wolfgang
A1  - Guo, Sharon
A1  - Riesen, Alfred
A1  - Schubert, Jürgen
A1  - Zander, Willi
A1  - Krüger, Peter
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Simultaneous detection of cyanide and heavy metals for environmental analysis by means of µISEs
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 817
EP  - 823
ER  - 
TY  - JOUR
A1  - Buniatyan, Vahe V.
A1  - Abouzar, Maryam H.
A1  - Martirosyan, Norayr W.
A1  - Schubert, Jürgen
A1  - Gevorgian, Spartak
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
T1  - pH-sensitive properties of barium strontium titanate (BST) thin films prepared by pulsed laser deposition technique
JF  - Physica Status Solidi (A). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 824
EP  - 830
ER  - 
TY  - JOUR
A1  - Siqueira, José R. Jr.
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Associating biosensing properties with the morphological structure of multilayers containing carbon nanotubes on field-effect devices
JF  - Physica status solidi (a). 207 (2010), H. 4
Y1  - 2010
SN  - 1862-6300
N1  - Special Issue: Engineering of Functional Interfaces EnFI 2009
SP  - 781
EP  - 786
ER  - 
TY  - JOUR
A1  - Ullrich, Sebastian
A1  - Grottke, Oliver
A1  - Rossaint, Rolf
A1  - Staat, Manfred
A1  - Deserno, Thomas M.
A1  - Kuhlen, Torsten
T1  - Virtual Needle Simulation with Haptics for Regional Anaesthesia
Y1  - 2010
N1  - IEEE Virtual Reality 2010, Workshop on Medical Virtual Environments, Waltham, MA, USA, March 21, 2010
SP  - 1
EP  - 3
ER  - 
TY  - JOUR
A1  - Siqueira, Jose R.
A1  - Maki, Rafael M.
A1  - Paulovich, Fernando V.
A1  - Werner, Frederik
A1  - Poghossian, Arshak
A1  - Oliveira, Maria C. F. de
A1  - Zucolotto, Valtencir
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Use of Information Visualization Methods Eliminating Cross Talk in Multiple Sensing Units Investigated for a Light-Addressable Potentiometric Sensor
JF  - Analytical Chemistry  (2010)
Y1  - 2010
SN  - 0003-2700
SP  - 61
EP  - 65
ER  - 
TY  - JOUR
A1  - Grottke, O.
A1  - Braunschweig, T.
A1  - Philippen, B.
A1  - Gatzweiler, Karl-Heinz
A1  - Gronloh, N.
A1  - Staat, Manfred
A1  - Rossaint, R.
A1  - Tolba, R.
T1  - A New Model for Blunt Liver Injuries in the Swine
JF  - European Surgical Research. 44 (2010), H. 2
Y1  - 2010
SN  - 1421-9921
SP  - 65
EP  - 73
ER  - 
TY  - JOUR
A1  - Zhubanova, Azhar A.
A1  - Aknazarov, S. K.
A1  - Mansurov, Zulkhair
A1  - Digel, Ilya
A1  - Kozhalakova, A. A.
A1  - Akimbekov, Nuraly S.
A1  - O'Heras, Carlos
A1  - Tazhibayeva, S.
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
T1  - Adsorption of bacterial Lipopolysaccharides and blood plasma proteins on modified carbonized materials
N2  - Bacterial lipopolysaccharides (endotoxins) show strong biological effects at very low concentrations in human beings and many animals when entering the blood stream. These include affecting structure and function of organs and cells, changing metabolic functions, raising body temperature, triggering the coagulation cascade, modifying hemodynamics and causing septic shock. Because of this toxicity, the removal of even minute amounts is essential for safe parenteral administration of drugs and also for septic shock patients' care. The absence of a general method for endotoxin removal from liquid interfaces urgently requires finding new methods and materials to overcome this gap. Nanostructured carbonized plant parts is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study was comparative measurement of endotoxin- and blood proteins-related adsorption rate and adsorption capacity for different carboneous materials produced at different temperatures and under different surface modifications. As a main surface modificator, positively cbarged polymer, polyethileneimine (PEl) was used. Activated carbon materials showed good adsorption properties for LPS and some proteins used in the experiments. During the batch experiments, several techniques (dust removal, autoclaving) were used and optimized for improving the material's adsorption behavior. Also, with the results obtained it was possible to differentiate the materials according to their adsorption capacity and kinetic characteristics. Modification of the surface apparently has not affected hemoglobin binding to the adsorbent's surface. Obtained adsorption isotherms can be used as a powerful tool for designing of future column-based setups for blood purification from LPS, which is especially important for septic shock treatment.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2010
ER  -