TY  - CHAP
A1  - Großmann, Agnes
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Overview of the MultiRob 3D Lunar Industrial Development Project
T2  - Conference Contribution for the 30th ISTS, Kobe, Japan, 04.07.-10.07.2015
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
A1  - Hinsch, Andreas
A1  - Wittwer, Volker
ED  - Hugo-Le Goff, Anne
T1  - Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique
T2  - Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Labège. (SPIE proceedings series. 1728)
Y1  - 1992
SN  - 0-8194-0901-4
SP  - 13
EP  - 25
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Hartmann, Axel
A1  - Kallweit, Stephan
A1  - Feldusen, Antje
A1  - Schröder, Wolfgang
T1  - Detection of upstream propagating sound waves at buffet flow using high-speed PIV
BT  - 16th International Symposium on Applications of Laser Techniques to Fluid Mechanics ; 9th to 12th July 2012 Lisbon, Portugal
Y1  - 2012
N1  - Aerodynamisches Institut <Aachen> ; International Symposium on Applications of Laser Techniques to Fluid Mechanics <16, 2012, Lissabon>
ER  - 
TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - CHAP
A1  - Kallweit, Stephan
A1  - Tedjasukmana, O.
A1  - Korculanin, O.
ED  - Kähler, Christian J.
T1  - Adaption und Implementierung eines 3D-PIV Algorithmus auf massiv paralleler Hardware
T2  - Lasermethoden in der Strömungsmesstechnik : 21. Fachtagung, 3. - 5. September 2013, München
Y1  - 2013
SN  - 978-3-9805613-9-6
N1  - Fachtagung Lasermethoden in der Strömungsmesstechnik <13, 2013, München>
PB  - GALA
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
A1  - Eichler, Fabian
A1  - Thurn, Laura
A1  - Jahn, Simon
A1  - Bremen, Sebastian
T1  - Solution approaches and process concepts for powder bed-based melting of glass
T2  - Industrializing Additive Manufacturing. Proceedings of AMPA2020
N2  - In the study, the process chain of additive manufacturing by means of powder bed fusion will be presented based on the material glass. In order to reliably process components additively, new concepts with different solutions were developed and investigated.

Compared to established metallic materials, the properties of glass materials differ significantly. Therefore, the process control was adapted to the material glass in the investigations. With extensive parameter studies based on various glass powders such as borosilicate glass and quartz glass, scientifically proven results on powder bed fusion of glass are presented. Based on the determination of the particle properties with different methods, extensive investigations are made regarding the melting behavior of glass by means of laser beams. Furthermore, the experimental setup was steadily expanded. In addition to the integration of coaxial temperature measurement and regulation, preheating of the building platform is of major importance. This offers the possibility to perform 3D printing at the transformation temperatures of the glass materials. To improve the component’s properties, the influence of a subsequent heat treatment was also investigated.

The experience gained was incorporated into a new experimental system, which allows a much better exploration of the 3D printing of glass. Currently, studies are being conducted to improve surface texture, building accuracy, and geometrical capabilities using three-dimensional specimen.

The contribution shows the development of research in the field of 3D printing of glass, gives an insight into the machine and process engineering as well as an outlook on the possibilities and applications.
KW  - Glass powder
KW  - Laser processing
KW  - Additive manufacturing
KW  - Melting
KW  - L-PBF
Y1  - 2020
SN  - 978-3-030-54333-4 (Print)
SN  - 978-3-030-54334-1 (Online)
U6  - http://dx.doi.org/10.1007/978-3-030-54334-1_7
N1  - International Conference on Additive Manufacturing in Products and Applications. 01.-03. September 2020. Zurich, Switzerland
SP  - 82
EP  - 95
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
T1  - Basic research on lattice structures focused on the strut shape and welding beads
T2  - Physics Procedia
Y1  - 2016
U6  - http://dx.doi.org/10.1016/j.phpro.2016.08.086
SN  - 1875-3884
N1  - Laser Assisted Net Shape Engineering 
9th International Conference on Photonic Technologies Proceedings of the LANE 2016
VL  - Vol. 83
SP  - 833
EP  - 838
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings
T2  - The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/20179403008
N1  - MATEC Web Conf. Vol 94, 2017, 03008
MATEC Web of Conferences 94, 03008 (2017)
ET  - Vol. 94
ER  - 
TY  - CHAP
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Astaneh-Asl, A.
A1  - Apaydin, N. M.
T1  - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge
T2  - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges
Y1  - 2015
SN  - 9781138027572
SP  - 1169
EP  - 1173
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - CHAP
A1  - Kleine, Harald
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Havermann, Marc
A1  - Olivier, Herbert
T1  - PIV Measurement of Shock Wave Diffraction
T2  - 18th International Symposium on Applications of Laser Techniques to Fluid Mechanics, 2016, Lissabon
Y1  - 2016
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Klocke, Martina
T1  - Projektmodul im Bachelorstudiengang Maschinenbau bzw. Mechatronik
T2  - Hochschulrektorenkonferenz HRK nexus : Kompetenzorientiertes Prüfen in den Ingenieurwissenschaften und in der Informatik. Gemeinsame Tagung von 4ING und nexus. 29.3.2011 Bremen
Y1  - 2011
SP  - 1
EP  - 25
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - A new definition of competence developing games - and a framework to assess them
T2  - ACHI 2016 : The Ninth International Conference on Advances in Computer-Human Interactions
N2  - There are different types of games that try to make use of the motivation of a gaming situation in learning contexts. This paper introduces the new terminology ‘Competence Developing Game’ (CDG) as an umbrella term for all games with this intention. Based on this new terminology, an assessment framework has been developed and validated in scope of an empirical study. Now, all different types of CDGs can be evaluated according to a defined and uniform set of assessment criteria and, thus, are comparable according to their characteristics and effectiveness.
KW  - Serious Games
KW  - Gamification
KW  - Business Simulations
KW  - Assessment
Y1  - 2016
SN  - 978-1-61208-468-8
N1  - Proceeding of the Ninth International Conference on Advances in Computer-Human Interactions (ACHI 2016), Venice.
SP  - 95
EP  - 97
ER  - 
TY  - CHAP
A1  - Leidinger, Rafael
A1  - Schürmann, Volker
A1  - Wollert, Jörg
A1  - Schneider, Christoph
T1  - Entwicklungsprojekt BASic - Bluetooth Authentication Service
T2  - Wireless Technologies : 12. Kongress, 22. - 23. September 2010, Bochum ; von der Technologie zur Anwendung / Jörg F. Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; 810)
Y1  - 2010
SN  - 978-3-18-381010-9
SP  - 296
EP  - 303
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Moshiri-Kahak, Amir
A1  - Pfaff, Raphael
A1  - Gäbel, Markus
A1  - Reich, Alexander
T1  - Modellierung der  Adhäsionsfläche im Rad-Schiene-Kontakt unter Einsatz von  reibwertverbessernden Mitteln
T2  - 15. Internationale Schienenfahrzeugtagung Rad Schiene 2017, Dresden, März 2017
Y1  - 2017
N1  - Internationale Schienenfahrzeugtagung <15., 2017, Dresden>
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Kallweit, Stephan
A1  - Michaux, Frank
A1  - Hojo, Teppei
T1  - Typical Velocity Fields and Vortical Structures around a Formula One Car, based on Experimental Investigations using Particle Image Velocimetry
T2  - SAE International Journal of Passenger Cars - Mechanical Systems
Y1  - 2016
U6  - http://dx.doi.org/10.4271/2016-01-1611
SN  - 1946-4002
ER  - 
TY  - CHAP
A1  - Otten, Christian
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Schwarz, A.
A1  - Gebhardt, Andreas
T1  - Innovative Laserschweißtechnologie für additiv gefertigte Bauteile
T2  - Große Schweißtechnische Tagung
Y1  - 2019
SN  - 978-3-96144-066-5
N1  - DVS CONGRESS 2019, Große Schweißtechnische Tagung, DVS-Studentenkongress. 16. bis 17. September 2019, Düsseldorf. DVS-Berichte, Band 355
SP  - 150
EP  - 157
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Beeinträchtigung des Druckaufbaus in Gleitlagern durch Schmierstoffverschäumung
T2  - Gleit- und Wälzlagerungen : Gestaltung, Berechnung, Einsatz; Tagung Neu-Ulm, 14. und 15. März 1985 / VDI-Ges. Entwicklung, Konstruktion, Vertrieb. - (VDI-Berichte ; 549)
Y1  - 1985
SN  - 3-18-090549-2
SN  - 0083-5560
SP  - 373
EP  - 397
ER  - 
TY  - CHAP
A1  - Peeken, Heinz
A1  - Troeder, Christoph
A1  - Benner, Joachim
A1  - Platt, Werner
T1  - A new approach to describe the mechanical performance of flexible couplings in drive systems
T2  - Proceedings of the International Conference on Rotordynamics : September 14 - 17, 1986, Tokyo
Y1  - 1986
N1  - International Conference on Rotordynamics <1986, Tōkyō>
SP  - 159
EP  - 163
PB  - IFToMM
CY  - Tokyo
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Railway Challenge 2018 - Ein Wettbewerb für Parkbahn-Lokomotiven
T2  - Deine Bahn
Y1  - 2018
SN  - 0948-7263
SP  - 22
EP  - 24
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Burnham, Keith J.
T1  - On abstraction and interpretability: a behavioural perspective
T2  - 19th International Conference on Systems Engineering 2008 : ICSENG '08 : 19 - 21 Aug. 2008, University of Nevada, Las Vegas, Nevada
Y1  - 2008
SN  - 978-0-7695-3331-5 ; 978-0-7695-2719-2
SP  - 89
EP  - 94
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An application of adaptive control in the behavioural framework
T2  - 21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings
Y1  - 2011
SN  - 978-1-4577-1078-0 ; 978-0-7695-4495-3
SP  - 49
EP  - 54
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An approach to adaptive control in the behavioural framework
T2  - UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)
Y1  - 2010
SN  - 978-1-62748-119-9
SP  - 833
EP  - 838
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Melcher, Karin
A1  - Franzen, Julian
T1  - Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems
T2  - Proceedings of the European Conference of the PHM Society
Y1  - 2018
VL  - 4
IS  - 1
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Moshiri, Amir
A1  - Reich, Alexander
A1  - Gäbel, Markus
T1  - Modelling of the effect of sanding on the wheel-rail adhesion area
T2  - First International Conference on Rail Transportation
Y1  - 2017
N1  - 2017 ICRT;
International Conference on Rail Transportation <1, 2017, Chengdu, China>
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Pichler, Alexander
A1  - George, Alfred
A1  - Seiler, Friedrich
T1  - Model based image processing for flow visualisation : 16th International Conference on Systems Science, Wroclaw, Poland, September 04 - 06, 2007
T2  - PU / Institut Franco-Allemand de Recherches de Saint-Louis ; 2007, 620
Y1  - 2007
SP  - 1
EP  - 10
PB  - ISL
CY  - Saint Louis, France
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Sappler, Magnus
T1  - TRANSPACT : die automatische Mittelpufferkupplung für attraktiven Güterverkehr
T2  - RAIL-FREIGHT 2014 : Zukunft des Schienengüterverkehrs ; Technologie - Ökonomie - Ökologie - Verkehrspolitik ; [Tagungsdokumentation des IV. Internationalen Fachsymposiums zum Thema Schienengüterverkehr] (Bahntechnik Aktuell ; 48)
Y1  - 2014
SN  - 978-3-940727-41-1
SP  - 121
EP  - 128
PB  - Verl. d. IFV Bahntechnik
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Schmidt, B. D.
A1  - Enning, Manfred
T1  - Towards inclusion of the freight rail  system in the industrial internet of things - Wagon 4.0
T2  - Stephenson  Conference, London, March 2017
Y1  - 2017
N1  - IMechE Stephenson Conference <2017, London, United Kingdom>
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Shahidi, Parham
A1  - Enning, Manfred
T1  - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - CHAP
A1  - Pfeiffer, Johann
A1  - Balc, N.
A1  - Gebhardt, Andreas
T1  - Studie zur Untersuchung der Auswirkung von Fräsbahnstrategien auf die Oberflächenqualität von mittels SLM gefertigten Metallteilen
T2  - Tagungsband 21. Nachwuchswissenschaftler*innenkonferenz
N2  - Für die Herstellung von metallischen Bauteilen wird in der heutigen Zeit eine Vielzahl
von Verfahren auf dem Markt angeboten. Dabei stehen die additiven im Wettbewerb
zu den konventionellen Verfahren. Die erreichbaren Oberflächenqualitäten der additiven sind nicht mit denen spanender Verfahren vergleichbar. Für diesen Beitrag wurde analysiert, ob sich ein mittels Selektivem Laserschmelzen (SLM) additiv hergestellter Edelstahl hinsichtlich seiner Oberflächenqualität nach der Zerspanung von einem umgeformten konventionell hergestellten Edelstahl gleicher Sorte unterscheidet.
Y1  - 2021
SN  - 978-3-932886-36-2
N1  - 21. Nachwuchswissenschaftler*innenkonferenz, Ernst-Abbe-Hochschule Jena
26. und 27. Mai 2021
SP  - 99
EP  - 102
PB  - Verlag Ernst-Abbe-Hochschule Jena
CY  - Jena
ER  - 
TY  - CHAP
A1  - Pleßmann, K. W.
A1  - Wollert, Jörg
T1  - Hybride Beobachter zur Regelung arbeitspunktabhängiger Regelstrecken
T2  - Berichtsband / 3. Workshop "Fuzzy Control" des GMA-UA 1.4.2 am 11./12.11.1993 in Dortmund. (Forschungsberichte / Universität Dortmund, Fakultät für Elektrotechnik ; 2/93)
Y1  - 1993
SP  - 122
EP  - 126
PB  - Univ., Fak. Elektrotechnik
CY  - Dortmund
ER  - 
TY  - CHAP
A1  - Quadflieg, Till
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jockenhövel, Stefan
A1  - Reisgen, Uwe
A1  - Gries, Thomas
ED  - Heslehurst, Rikard Benton
T1  - Shear connectors for hybrid joints of metal and FRP
T2  - Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference
Y1  - 2012
SN  - 978-0-9873285-0-2
SP  - [152]
EP  - [160]
PB  - Composites Australia
CY  - Hawthorne
ER  - 
TY  - CHAP
A1  - Raatschen, Hans-Jürgen
T1  - Fokussierung ebener Spannungswellen in einer linearelastischen Scheibe
T2  - Sonderforschungsbereich 27 Wellenfokussierung der Rheinisch-Westfälischen Technischen Hochschule Aachen, Kolloquium 3. und 4. Juli 1985
Y1  - 1985
SP  - 105
EP  - 118
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Amdrej V.
ED  - Turichin, G.
T1  - Measurement method of electron beam plasma parameters by non-vacuum electron beam welding
T2  - Beam technologies & laser application : proceedings of the VI international conference, Saint Petersburg, Sept. 23-25, 2009
Y1  - 2009
SP  - 259
EP  - 267
PB  - Politechnical Univ.
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Gumenyuk, Andrej
T1  - Application of electron beam welding to fabrication of steel-aluminium dissimilar joint
T2  - Beam technologies & laser application : proceedings of the VII international conference, Saint Petersburg, Sept. 18-21, 2012
Y1  - 2012
SP  - 265
EP  - 279
PB  - Publ. House
CY  - Saint Petersburg
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Essers, Marc
A1  - Thiele, Regina
A1  - Schiebahn, Alexander
T1  - Klebstofffixiertes Rührreibschweißen von dünnen Aluminiumblechen
T2  - DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012. (DVS-Berichte ; 286)
Y1  - 2012
SN  - 978-3-87155-593-0
SP  - 20
EP  - 25
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
T1  - Konduktiv unterstütztes Rührreibschweißen an Stahl- und Aluminiumwerkstoffen
T2  - DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des Rührreibschweißens in Fertigungsprozessketten" ; Vorträge der Veranstaltung in Nürnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)
Y1  - 2010
SN  - 978-3-87155-592-3
SP  - 394
EP  - 398
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
A1  - Schmidt, Andre
A1  - Rossiter, Eduardo
ED  - Hildebrand, Jörg
T1  - Integrative Berechnung von Verzug und Eigenspannungen auf Basis realer Schweißparameter
T2  - Tagungsband / SYSWELD-Forum 2009 : 22. - 23. Oktober 2009, Weimar
Y1  - 2009
SN  - 978-3-86068-401-6
SP  - 32
EP  - 41
PB  - Univ.-Verl.
CY  - Weimar
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Schmidt, A.
A1  - Rossiter, E.
A1  - Loose, T.
T1  - Durchgängige Schweißsimulation der Eigenspannung und des Gefügezustands auf Basis realer Schweißstromquellenparameter
T2  - DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des Rührreibschweißens in Fertigungsprozessketten" ; Vorträge der Veranstaltung in Nürnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)
Y1  - 2010
SN  - 978-3-87155-592-3
SP  - 37
EP  - 42
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Schmidt, Andre
ED  - Rumpe, Bernhard
ED  - Lichter, Horst
T1  - SimWeld - 10 Jahre Schweißprozesssimulation im ISF
T2  - Entwicklung und Evolution von Forschungssoftware : Tagungsband des Workshops, Rolduc, November 2011. (Aachener Informatik-Berichte, Software-Engineering ; Bd. 14)
Y1  - 2012
SN  - 978-3-8440-1600-0
SP  - 55
EP  - 62
PB  - Shaker
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ufer, Sebastian
A1  - Guenel, Ismet
A1  - Gach, Stefan
T1  - Voruntersuchungen mit Ansys CFX zu einer Druckstufe von einem Druckstufensystem für das Elektronenstrahlschweißen
T2  - DVS Congress 2012 : Große Schweißtechnische Tagung, DVS-Studentenkongress ; Vorträge der Veranstaltungen in Saarbrücken am 17. und 18. September 2012. (DVS-Berichte ; 286)
Y1  - 2012
SN  - 978-3-87155-593-0
SP  - 33
EP  - 35
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Simulation des Tropfenübergangs beim MSG-Impulslichtbogenschweißen
T2  - Große Schweißtechnische Tagung 2011 : Studentenkongress 2011, Abschlusskolloquium Lichtbogenschweißen 2011; Vorträge der Veranstaltung in Hamburg
Y1  - 2011
SN  - 978-3-87155-267-0
SP  - 554
EP  - 559
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
ED  - Vollertsen, Frank
ED  - Büttgenbach, Stephanus
T1  - Fortschritte beim linienförmigen Mikrodispensen ungefüllter Klebstoffe
T2  - 4. Kolloquium Mikroproduktion : Fachbeiträge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009
Y1  - 2009
SN  - 978-3-933762-32-0
SP  - 43
EP  - 51
PB  - BIAS Verl.
CY  - Bremen
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  -