TY  - JOUR
A1  - Muschallik, Lukas
A1  - Molinnus, Denise
A1  - Bongaerts, Johannes
A1  - Pohl, Martina
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Siegert, Petra
A1  - Selmer, Thorsten
T1  - (R,R)-Butane-2,3-diol Dehydrogenase from Bacillus clausii DSM 8716T: Cloning and Expression of the bdhA-Gene, and Initial Characterization of Enzyme
JF  - Journal of Biotechnology
N2  - The gene encoding a putative (R,R)-butane-2,3-diol dehydrogenase (bdhA) from Bacillus clausii DSM 8716T was isolated, sequenced and expressed in Escherichia coli. The amino acid sequence of the encoded protein is only distantly related to previously studied enzymes (identity 33–43%) and exhibited some uncharted peculiarities. An N-terminally StrepII-tagged enzyme variant was purified and initially characterized. The isolated enzyme catalyzed the (R)-specific oxidation of (R,R)- and meso-butane-2,3-diol to (R)- and (S)-acetoin with specific activities of 12 U/mg and 23 U/mg, respectively. Likewise, racemic acetoin was reduced with a specific activity of up to 115 U/mg yielding a mixture of (R,R)- and meso-butane-2,3-diol, while the enzyme reduced butane-2,3-dione (Vmax 74 U/mg) solely to (R,R)-butane-2,3-diol via (R)-acetoin. For these reactions only activity with the co-substrates NADH/NAD+ was observed. The enzyme accepted a selection of vicinal diketones, α-hydroxy ketones and vicinal diols as alternative substrates. Although the physiological function of the enzyme in B. clausii remains elusive, the data presented herein clearly demonstrates that the encoded enzyme is a genuine (R,R)-butane-2,3-diol dehydrogenase with potential for applications in biocatalysis and sensor development.
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.jbiotec.2017.07.020
SN  - 0168-1656
VL  - 258
SP  - 41
EP  - 50
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wilke, Thomas
T1  - [Rezension zu:] Deutsch, Kristina: Jean Marot. Un graveur d'architecture à l'époque de Louis XIV. (= Ars et Scientia; 12), Berlin; Boston 2015.
JF  - ArtHist.net
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - A comparison of complex chemistry mechanisms for hydrogen methane blends based on the Sandia / Sydney Bluff-Body Flame HM1
T2  - Proceedings of the Eleventh Asia‐Pacific Conference on Combustion (ASPACC 2017), New South Wales, Australia, 10-14 December 2017
Y1  - 2017
SN  - 978-1-5108-5646-2
SP  - 262
EP  - 265
ER  - 
TY  - CHAP
A1  - Walenta, Robert
A1  - Schellekens, Twan
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A decentralised system approach for controlling AGVs with ROS
T2  - AFRICON, Proceedings
Y1  - 2017
SN  - 978-1-5386-2775-4
U6  - http://dx.doi.org/10.1109/AFRCON.2017.8095693
SN  - 2153-0033
N1  - AFRICON <2017, 18-20 Sept., Cape Town, South Africa>
SP  - 1436
EP  - 1441
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Hayashi, Kosuke
A1  - Sakamoto, Azuma
A1  - Werner, Frederik
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - A high-Q resonance-mode measurement of EIS capacitive sensor by elimination of series resistance
JF  - Sensor and Actuators B: Chemical
N2  - An EIS capacitive sensor is a semiconductor-based potentiometric sensor, which is sensitive to the ion concentration or pH value of the solution in contact with the sensing surface. To detect a small change in the ion concentration or pH, a small capacitance change must be detected. Recently, a resonance-mode measurement was proposed, in which an inductor was connected to the EIS capacitive sensor and the resonant frequency was correlated with the pH value. In this study, the Q factor of the resonant circuit was enhanced by canceling the internal resistance of the reference electrode and the internal resistance of the inductor coil with the help of a bypass capacitor and a negative impedance converter, respectively. 1% variation of the signal in the developed system corresponded to a pH change of 3.93 mpH, which was about 1/12 of the conventional method, suggesting a better performance in detection of a small pH change.
KW  - Negative impedance convertor
KW  - Resonance-mode measurement
KW  - Chemical sensor
KW  - EIS capacitive sensor
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.snb.2017.03.002
SN  - 0925-4005
VL  - 248
SP  - 1006
EP  - 1010
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Dörig, Bastian
A1  - Ederer, Thorsten
A1  - Pelz, Peter Franz
A1  - Pfetsch, Marc
A1  - Wolf, Jan
T1  - A mixed-integer nonlinear program for the design of gearboxes
T2  - Operations Research Proceedings 2016
N2  - Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.
Y1  - 2017
SN  - 978-3-319-55701-4
U6  - http://dx.doi.org/10.1007/978-3-319-55702-1_31
SP  - 227
EP  - 233
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Mayer, Jan
A1  - Hentschke, Reinhard
A1  - Hager, Jonathan
A1  - Hojdis, Nils
A1  - Karimi-Varnaneh, Hossein Ali
T1  - A Nano-Mechanical Instability as Primary Contribution to Rolling Resistance
JF  - Scientific Reports
Y1  - 2017
SN  - 2045-2322
VL  - 7
IS  - Article number 11275
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Garibaldi, F.
A1  - Beging, Stefan
A1  - Canese, R.
A1  - Carpinelli, G.
A1  - Clinthorne, N.
A1  - Colilli, S.
A1  - Cosentino, L.
A1  - Finocchiaro, P.
A1  - Giuliani, F.
A1  - Gricia, M.
A1  - Lucentini, M.
A1  - Majewski, S.
A1  - Monno, E.
A1  - Musico, P.
A1  - Santavenere, F.
A1  - Tödter, J.
A1  - Wegener, Hans-Peter
A1  - Ziemons, Karl
T1  - A novel TOF-PET MRI detector for diagnosis and follow up of the prostate cancer
JF  - European Physical Journal Plus
Y1  - 2017
U6  - http://dx.doi.org/10.1140/epjp/i2017-11662-x
SN  - 2190-5444
VL  - 132
IS  - 9
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - de Honde, Lukas
A1  - Porst, Dariusz
A1  - Digel, Ilya
ED  - Fischerauer, Alice
T1  - A randomized, observational thermographic study of the neck region before and after a physiotherapeutic intervention
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 122
EP  - 123
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A System Layout for Cognitive Service Robots
T2  - Cognitive Robot Architectures. Proceedings of EUCognition 2016
Y1  - 2017
SN  - 1613-0073
N1  - CEUR-WS Vol-1855
SP  - 44
EP  - 45
ER  - 
TY  - BOOK
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Abschluss und Abschlussanalyse: systematische Darstellung in Übersichten
Y1  - 2017
SN  - 978-3-7369-9642-7
N1  - Reihe Betriebswirtschaftslehre in Übersichten ; 2
PB  - Cuvillier
CY  - Göttingen
ET  - 6. Auflage, Studienausgabe
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Ruff-Stahl, Hans-Joachim K.
T1  - Advances in Composite Manufacturing of Helicopter Parts
JF  - International Journal of Aviation, Aeronautics, and Aerospace
Y1  - 2017
U6  - http://dx.doi.org/10.15394/ijaaa.2017.1153
SN  - 2374-6793
VL  - 4
IS  - 1
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
T1  - Advances in solar tower technology
JF  - Wiley interdisciplinary reviews : Energy and Environment : WIREs
Y1  - 2017
U6  - http://dx.doi.org/10.1002/wene.217
SN  - 2041-840X
VL  - 6
IS  - 1
SP  - 1
EP  - 19
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Müller, Wolfram
A1  - Jung, Alexander
A1  - Ahammer, Helmut
T1  - Advantages and problems of nonlinear methods applied to analyze physiological time signals: human balance control as an example
JF  - Scientific Reports
Y1  - 2017
SN  - 2045-2322
U6  - http://dx.doi.org/10.1038/s41598-017-02665-5
VL  - 7
IS  - Article number 2464
SP  - 1
EP  - 11
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Buhl, Eva Miriam
A1  - Baumann, Martin
A1  - Schmitz-Rode, Thomas
A1  - Slabu, Ioana
T1  - Agglomeration of magnetic nanoparticles and its effects on magnetic hyperthermia
JF  - Current Directions in Biomedical Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1515/cdbme-2017-0096
SN  - 2364-5504
VL  - 3
IS  - 2
SP  - 457
EP  - 460
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Marco, Heather G.
A1  - Ferrein, Alexander
T1  - AGNES: The African-German Network of Excellence in Science
T2  - Proceedings of the 2nd Developing World Robotics Forum, Workshop at IEEE AFRICON 2017
Y1  - 2017
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Schänzle, Christian
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - Algorithmic system design using scaling and affinity laws
T2  - Operations Research Proceedings 2015
N2  - Energy-efficient components do not automatically lead to energy-efficient systems. Technical Operations Research (TOR) shifts the focus from the single component to the system as a whole and finds its optimal topology and operating strategy simultaneously. In previous works, we provided a preselected construction kit of suitable components for the algorithm. This approach may give rise to a combinatorial explosion if the preselection cannot be cut down to a reasonable number by human intuition. To reduce the number of discrete decisions, we integrate laws derived from similarity theory into the optimization model. Since the physical characteristics of a production series are similar, it can be described by affinity and scaling laws. Making use of these laws, our construction kit can be modeled more efficiently: Instead of a preselection of components, it now encompasses whole model ranges. This allows us to significantly increase the number of possible set-ups in our model. In this paper, we present how to embed this new formulation into a mixed-integer program and assess the run time via benchmarks. We present our approach on the example of a ventilation system design problem.
KW  - Optimal Topology
KW  - Piecewise Linearization
KW  - Ventilation System
KW  - Similarity Theory
Y1  - 2017
SN  - 978-3-319-42901-4
SN  - 978-3-319-42902-1
U6  - http://dx.doi.org/10.1007/978-3-319-42902-1
N1  - International Conference of the German, Austrian and Swiss Operations Research Societies (GOR, ÖGOR, SVOR/ASRO), University of Vienna, Austria, September 1-4, 2015
SP  - 605
EP  - 611
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Hauser, Christine
A1  - Ortner, Marion
A1  - Muggenthaler, Claudia
A1  - Diehl-Schmid, Janine
A1  - Angermann, Susanne
A1  - Hapfelmeier, Alexander
A1  - Schmaderer, Christoph
A1  - Grimmer, Timo
T1  - Altered neurovascular coupling as measured by optical imaging: a biomarker for Alzheimer’s disease
JF  - Scientific Reports
Y1  - 2017
U6  - http://dx.doi.org/10.1038/s41598-017-13349-5
SN  - 2045-2322
N1  - Article 12906
VL  - 7
IS  - 1
SP  - 1
EP  - 11
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Lopes, Pedro
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
A1  - Bung, Daniel B.
T1  - Alternating skimming flow over a stepped spillway
JF  - Environmental Fluid Mechanics
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s10652-016-9484-x
SN  - 1573-1510
VL  - 17
IS  - 2
SP  - 303
EP  - 322
PB  - Springer
CY  - Berlin
ER  - 
TY  - GEN
A1  - Olbertz, Klaus
T1  - Altersdiskriminierung bei altersabhängiger Staffelung der Urlaubsdauer
T2  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
N1  - Anm. zu LAG Mecklenburg-Vorpommern: Entscheidungsbesprechung zum Urteil v. 23.02.2016 - 2 Sa 192/15
SP  - 21
EP  - 21
ER  - 
TY  - JOUR
A1  - Rietsch, Stefan H. G.
A1  - Pfaffenrot, Viktor
A1  - Bitz, Andreas
A1  - Orzada, Stephan
A1  - Brunheim, Sascha
A1  - Lazik-Palm, Andrea
A1  - Theysohn, Jens M.
A1  - Ladd, Mark E.
A1  - Quick, Harald H.
A1  - Kraff, Oliver
T1  - An 8-channel transceiver 7-channel receive RF coil setup for high SNR ultrahigh-field MRI of the shoulder at 7T
JF  - Medical Physics
Y1  - 2017
U6  - http://dx.doi.org/10.1002/mp.12612
SN  - 0094-2405
IS  - Article in press
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - JOUR
A1  - Honarvarfard, Elham
A1  - Gamella, Maria
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
A1  - Katz, Evgeny
T1  - An enzyme-based reversible Controlled NOT (CNOT) logic gate operating on a semiconductor transducer
JF  - Applied Materials Today
N2  - An enzyme-based biocatalytic system mimicking operation of a logically reversible Controlled NOT (CNOT) gate has been interfaced with semiconductor electronic transducers. Electrolyte–insulator–semiconductor (EIS) structures have been used to transduce chemical changes produced by the enzyme system to an electronically readable capacitive output signal using field-effect features of the EIS device. Two enzymes, urease and esterase, were immobilized on the insulating interface of EIS structure producing local pH changes performing XOR logic operation controlled by various combinations of the input signals represented by urea and ethyl butyrate. Another EIS transducer was functionalized with esterase only, thus performing Identity (ID) logic operation for the ethyl butyrate input. Both semiconductor devices assembled in parallel operated as a logically reversible CNOT gate. The present system, despite its simplicity, demonstrated for the first time logically reversible function of the enzyme system transduced electronically with the semiconductor devices. The biomolecular realization of a CNOT gate interfaced with semiconductors is promising for integration into complex biomolecular networks and future biosensor/biomedical applications.
KW  - Electrolyte–insulator–semiconductor
KW  - Capacitive field-effect
KW  - CNOT
KW  - XOR
KW  - Enzyme logic gate
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.apmt.2017.08.003
SN  - 2352-9407
VL  - 9
SP  - 266
EP  - 270
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Tran, Linda
A1  - Mottaghy, K.
A1  - Arlt-Körfer, Sabine
A1  - Waluga, Christian
A1  - Behbahani, Mehdi
T1  - An experimental study of shear-dependent human platelet adhesion and underlying protein-binding mechanisms in a cylindrical Couette system
JF  - Biomedizinische Technik
Y1  - 2017
U6  - http://dx.doi.org/10.1515/bmt-2015-0034
SN  - 0013-5585
VL  - 62
IS  - 4
SP  - 383
EP  - 392
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Zug, Sebastian
A1  - Niemueller, Tim
A1  - Hochgeschwender, Nico
A1  - Seidensticker, Kai
A1  - Seidel, Martin
A1  - Friedrich, Tim
A1  - Neumann, Tobias
A1  - Karras, Ulrich
A1  - Kraetzschmar, Gerhard K.
A1  - Ferrein, Alexander
T1  - An Integration Challenge to Bridge the Gap Among Industry-Inspired RoboCup Leagues
T2  - RoboCup 2016: Robot World Cup XX. RoboCup 2016.
Y1  - 2017
SN  - 978-3-319-68792-6
U6  - http://dx.doi.org/10.1007/978-3-319-68792-6_13
N1  - Lecture Notes in Computer Science, LNCS, Vol 9776
SP  - 157
EP  - 168
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Orzada, Stephan
A1  - Bitz, Andreas
A1  - Johst, Sören
A1  - Gratz, Marcel
A1  - Völker, Maximilian N.
A1  - Kraff, Oliver
A1  - Abuelhaija, Ashraf
A1  - Fiedler, Thomas M.
A1  - Solbach, Klaus
A1  - Quick, Harald H.
A1  - Ladd, Mark E.
T1  - Analysis of an integrated 8-Channel Tx/Rx body array for use as a body coil in 7-Tesla MRI
JF  - Frontiers in Physics
Y1  - 2017
U6  - http://dx.doi.org/10.3389/fphy.2017.00017
SN  - 2296-424X
N1  - Article number 17
VL  - 5
IS  - Jun
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Analysis of Big Data Streams to obtain Braking Reliability  Information for Train Protection systems
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Liebenstund, Lena
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Herrmann, Ulf
A1  - Dueing, Andreas
T1  - Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components
T2  - AIP Conference Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.1063/1.4984388
VL  - 1850
IS  - 1
SP  - 030045-1
EP  - 030045-8
ER  - 
TY  - JOUR
A1  - Pfaff, Raphael
T1  - Apps für den Güterwagen? Wie der Güterwagen 4.0 die effiziente Integration der Güterbahn in ERTMS ermöglicht
JF  - Ingenieurspiegel
Y1  - 2017
IS  - 2
SP  - 1
EP  - 2
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Arbeitsrechtliche Aspekte beim Rechtsformwechsel
JF  - Gesellschafts- und Wirtschaftsrecht : GWR
Y1  - 2018
SN  - 1868-1816
SP  - 314
EP  - 317
PB  - Beck
CY  - München
ER  - 
TY  - CHAP
A1  - Thurn, Laura
A1  - Gebhardt, Andreas
T1  - Arousing Enthusiasm for STEM: Teaching 3D Printing Technology
T2  - Conference Proceedings: New Perspectives in Science Education
Y1  - 2017
SN  - 978-88-6292-847-2
SP  - 87
EP  - 92
PB  - liberiauniversitaria.it
CY  - Padua
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
ED  - Weller, Marc-Philippe
ED  - Kindler, Peter
T1  - Art. 48 EGBGB: Wahl eines in einem anderen Mitgliedstaat der Europäischen Union erworbenen Namens, Rn. 5-8, Rn. 11-14, Rn. 45-47, Rn. 48-51
T2  - Beck‘scher Online-Großkommentar zum Bürgerlichen Recht (BeckOGK), Band: Internationales Privatrecht
Y1  - 2017
PB  - C.H.Beck
CY  - München
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Bung, Daniel B.
T1  - Artificial Neural Networks and pattern recognition for air-water flow velocity estimation using a single-tip optical fibre probe
JF  - Journal of Hydro-environment Research
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.jher.2017.08.004
SN  - 1570-6443
VL  - 19
IS  - 3
SP  - 150
EP  - 159
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Aufhebungsverträge und Sperrzeit beim Bezug von Arbeitslosengeld - Neue Gestaltungsmöglichkeiten aufgrund geänderter Geschäftsanweisung der Bundesagentur für Arbeit
JF  - NWB - Steuer- und Wirtschaftsrecht
Y1  - 2018
SN  - 1860-9449
IS  - 21
SP  - 1588
EP  - 1593
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schäfer, Johannes
A1  - Wilms, Konrad
A1  - Schleser, Markus
T1  - Aufmischungsarmes, dickschichtiges MSG-Auftragschweißen mit entkoppelter Zweidrahttechnik
JF  - Schweißen und Schneiden
N2  - Für Auftragschweißaufgaben existiert eine Vielzahl an verfahrenstechnischen
Prozessvarianten, die je nach Charakteristik und Anwendungsfall
ausgewählt werden. Ein Nachteil der vorwiegend verwendeten Metall-
Schutzgasschweißprozesse (MSG) für das Auftragschweißen ist durch die
direkte Kopplung von Drahtvorschub zu Energieeintrag gegeben. Die vorgestellte
Zweidraht-Prozessvariante kann durch die Ausbildung eines übertragenen
und eines nicht-übertragenen Lichtbogens die elektrische Leistung
beider Lichtbögen variieren und damit einen direkten Einfluss auf
die Prozessgrößen Abschmelzleistung und Aufschmelzgrad nehmen. Im
Speziellen besteht über die Entkopplung von Drahtvorschub zu Schweißstromstärke
die Möglichkeit eines niederenergetischen Betriebs trotz hoher
Drahtvorschubgeschwindigkeit. Damit lassen sich Aufschmelzgrade
unter 2% umsetzen und Abschmelzleistungen bis zu 15 kg/h realisieren.
Y1  - 2017
SN  - 0036-7184
VL  - 69
IS  - 12
SP  - 838
EP  - 843
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Olbertz, Klaus
T1  - Auswirkungen des neuen Entgelttransparenzgesetzes - Viel Aufwand für Unternehmen, wenig Greifbares für Arbeitnehmer
JF  - NWB - Steuer- und Wirtschaftsrecht
Y1  - 2018
SN  - 1860-9449
IS  - 40
SP  - 3068
EP  - 3075
ER  - 
TY  - CHAP
A1  - Ayed, Anis Haj
A1  - Striegan, Constantin J. D.
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Kazari, M.
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Automated design space exploration of the hydrogen fueled "Micromix" combustor technology
N2  - Combined with the use of renewable energy sources for
its production, Hydrogen represents a possible alternative gas
turbine fuel for future low emission power generation. Due to
its different physical properties compared to other fuels such
as natural gas, well established gas turbine combustion
systems cannot be directly applied for Dry Low NOx (DLN)
Hydrogen combustion. This makes the development of new
combustion technologies an essential and challenging task
for the future of hydrogen fueled gas turbines.
The newly developed and successfully tested “DLN
Micromix” combustion technology offers a great potential to
burn hydrogen in gas turbines at very low NOx emissions.
Aiming to further develop an existing burner design in terms
of increased energy density, a redesign is required in order to
stabilise the flames at higher mass flows and to maintain low
emission levels.
For this purpose, a systematic design exploration has
been carried out with the support of CFD and optimisation
tools to identify the interactions of geometrical and design
parameters on the combustor performance. Aerodynamic
effects as well as flame and emission formation are observed
and understood time- and cost-efficiently. Correlations
between single geometric values, the pressure drop of the
burner and NOx production have been identified as a result.
This numeric methodology helps to reduce the effort of
manufacturing and testing to few designs for single
validation campaigns, in order to confirm the flame stability
and NOx emissions in a wider operating condition field.
Y1  - 2017
N1  - Proceedings of the 1st Global Power and Propulsion Forum
GPPF 2017, Jan 16-18, 2017, Zurich, Switzerland
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Kessler, Julia
A1  - Balc, Nicolae
A1  - Gebhardt, Andreas
A1  - Abbas, Karim
T1  - Basic research on lattice structures focused on the reliance of the cross sectional area and additional coatings
T2  - The 4th International Conference on Computing and Solutions in Manufacturing Engineering 2016 – CoSME’16
Y1  - 2017
U6  - http://dx.doi.org/10.1051/matecconf/20179403008
N1  - MATEC Web Conf. Vol 94, 2017, 03008
MATEC Web of Conferences 94, 03008 (2017)
ET  - Vol. 94
ER  - 
TY  - CHAP
A1  - Niemueller, T.
A1  - Lakemeyer, G.
A1  - Reuter, S.
A1  - Jeschke, S.
A1  - Ferrein, Alexander
T1  - Benchmarking of Cyber-Physical Systems in Industrial Robotics: The RoboCup Logistics League as a CPS Benchmark Blueprint
T2  - Cyber-Physical Systems: Foundations, Principles and Applications
N2  - In the future, we expect manufacturing companies to follow a new paradigm that mandates more automation and autonomy in production processes. Such smart factories will offer a variety of production technologies as services that can be combined ad hoc to produce a large number of different product types and variants cost-effectively even in small lot sizes. This is enabled by cyber-physical systems that feature flexible automated planning methods for production scheduling, execution control, and in-factory logistics.

During development, testbeds are required to determine the applicability of integrated systems in such scenarios. Furthermore, benchmarks are needed to quantify and compare system performance in these industry-inspired scenarios at a comprehensible and manageable size which is, at the same time, complex enough to yield meaningful results.

In this chapter, based on our experience in the RoboCup Logistics League (RCLL) as a specific example, we derive a generic blueprint for how a holistic benchmark can be developed, which combines a specific scenario with a set of key performance indicators as metrics to evaluate the overall integrated system and its components.
KW  - Smart factory
KW  - Industry 4.0
KW  - Cyber-physical systems
KW  - Multi-robot systems
KW  - Autonomous mobile robots
Y1  - 2017
U6  - http://dx.doi.org/10.1016/B978-0-12-803801-7.00013-4
SP  - 193
EP  - 207
PB  - Academic Press
CY  - London
ER  - 
TY  - JOUR
A1  - Reichert, Walter
T1  - Berufseinstieg für Wirtschaftsingenieure - Bachelor oder Master?
JF  - Berufsstart
Y1  - 2017
ER  - 
TY  - BOOK
A1  - Timme, Michael
T1  - BGB Crashkurs: der sichere Weg durch die Prüfung
Y1  - 2017
SN  - 978-3-406-70586-1
PB  - C.H. Beck
CY  - München
ET  - 4. Auflage
ER  - 
TY  - CHAP
A1  - Jabbari, Medisa
A1  - Bhattarai, Aroj
A1  - Anding, Ralf
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Biomechanical simulation of different prosthetic meshes for repairing uterine/vaginal vault prolapse
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
SP  - 118
EP  - 119
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - CHAP
A1  - Birgel, Stefan
A1  - Leschinger, Tim
A1  - Wegmann, Kilian
A1  - Staat, Manfred
ED  - Erni, Daniel
ED  - Fischerauer, Alice
ED  - Himmel, Jörg
ED  - Seeger, Thomas
ED  - Thelen, Klaus
T1  - Calculation of muscle forces and joint reaction loads in shoulder area via an OpenSim based computer calculation
T2  - 2nd YRA MedTech Symposium 2017 : June 8th - 9th / 2017 / Hochschule Ruhr-West
Y1  - 2017
SN  - 978-3-9814801-9-1
U6  - http://dx.doi.org/10.17185/duepublico/43984
N1  - A young researchers track of the 7th IEEE Workshop & SENSORICA 2017
N1  - In der Druckausgabe des Abstractbandes ist dieser Beitrag lose als Erratum beigefügt.
SP  - 116
EP  - 117
PB  - Universität Duisburg-Essen
CY  - Duisburg
ER  - 
TY  - JOUR
A1  - Scholl, Fabio
A1  - Morais, Paulo
A1  - Gabriel, Rayla
A1  - Schöning, Michael Josef
A1  - Siqueira, Jose Roberto, Jr.
A1  - Caseli, Luciano
T1  - Carbon nanotubes arranged as smart interfaces in lipid Langmuir-Blodgett films enhancing the enzymatic properties of penicillinase for biosensing applications
JF  - Applied Materials & Interfaces
N2  - In this paper, carbon nanotubes (CNTs) were incorporated in penicillinase-phospholipid Langmuir and Langmuir–Blodgett (LB) films to enhance the enzyme catalytic properties. Adsorption of the penicillinase and CNTs at dimyristoylphosphatidic acid (DMPA) monolayers at the air–water interface was investigated by surface pressure–area isotherms, vibrational spectroscopy, and Brewster angle microscopy. The floating monolayers were transferred to solid supports through the LB technique, forming mixed DMPA-CNTs-PEN films, which were investigated by quartz crystal microbalance, vibrational spectroscopy, and atomic force microscopy. Enzyme activity was studied with UV–vis spectroscopy and the feasibility of the supramolecular device nanostructured as ultrathin films were essayed in a capacitive electrolyte–insulator–semiconductor (EIS) sensor device. The presence of CNTs in the enzyme–lipid LB film not only tuned the catalytic activity of penicillinase but also helped conserve its enzyme activity after weeks, showing increased values of activity. Viability as penicillin sensor was demonstrated with capacitance/voltage and constant capacitance measurements, exhibiting regular and distinctive output signals over all concentrations used in this work. These results may be related not only to the nanostructured system provided by the film, but also to the synergism between the compounds on the active layer, leading to a surface morphology that allowed a fast analyte diffusion because of an adequate molecular accommodation, which also preserved the penicillinase activity. This work therefore demonstrates the feasibility of employing LB films composed of lipids, CNTs, and enzymes as EIS devices for biosensing applications.
Y1  - 2017
U6  - http://dx.doi.org/10.1021/acsami.7b08095
SN  - 1944-8252
VL  - 9
IS  - 36
SP  - 31054
EP  - 31066
PB  - ACS
CY  - Washington
ER  - 
TY  - PAT
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Bayer, Robin
A1  - Gossmann, Matthias
T1  - Celldrum electrode arrangement for measuring mechanical stress [Patent of invention]
N2  - The invention pertains to a CellDrum electrode arrangement for measuring mechanical stress, comprising a mechanical holder (1 ) and a non-conductive membrane (4), whereby the membrane (4) is at least partially fixed at its circumference to the mechanical holder (1), keeping it in place when the membrane (4) may bend due to forces acting on the membrane (4), the mechanical holder (1) and the membrane (4) forming a container, whereby the membrane (1) within the container comprises an cell- membrane compound layer or biological material (3) adhered to the deformable membrane 4 which in response to stimulation by an agent may exert mechanical stress to the membrane (4) such that the membrane bending stage changes whereby the container may be filled with an electrolyte, whereby an electric contact (2) is arranged allowing to contact said electrolyte when filled into to the container, whereby within a predefined geometry to the fixing of the membrane (4) an electrode (7) is arranged, whereby the electrode (7) is electrically insulated with respect to the electric contact (2) as well as said electrolyte, whereby mechanical stress due to an agent may be measured as a change in capacitance.
Y1  - 2017
N1  - Patent auch unter EP3403090, CN109477828, US2019033245 und LU92948 veröffentlicht.
PB  - WIPO
CY  - Geneva
ER  - 
TY  - JOUR
A1  - Ayed, Anis Haj
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Bohn, D.
T1  - CFD based exploration of the dry-low-NOx hydrogen micromix combustion technology at increased energy densities
JF  - Propulsion and Power Research
KW  - Micromix combustion
KW  - Hydrogen gas turbine
KW  - Hydrogen combustion
KW  - High hydrogen combustion
KW  - Dry-low-NOx (DLN) combustion
Y1  - 2017
SN  - 2212-540X
U6  - http://dx.doi.org/10.1016/j.jppr.2017.01.005
VL  - 6
IS  - 1
SP  - 15
EP  - 24
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wolf, Martin
A1  - König, Johannes Alexander
ED  - Eibl, Maximilian
ED  - Gaedke, Martin
T1  - Competence Developing Games – Ein Überblick
T2  - INFORMATIK 2017, Lecture Notes in Informatics (LNI), Gesellschaft für Informatik
N2  - Es existieren verschiedenste Arten von Spielen, die versuchen, die Motivation einer Spielsituation in einen ernsten Kontext zu überführen. In diesem Artikel wird der Überbegriff „Competence Developing Games“ definiert und anhand von Beispielen erläutert. Dafür werden Erkennungskriterien vorgestellt, entsprechende Spieltypen erläutert und eine Zuordnung durch-geführt.
KW  - Competence Developing Gam
KW  - Serious Game
KW  - Education
KW  - Gamification
KW  - Bewertungsframework
Y1  - 2017
SN  - 978-3-88579-669-5
U6  - http://dx.doi.org/10.18420/in2017_32
SP  - 385
EP  - 391
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Shahidi, Parham
A1  - Enning, Manfred
T1  - Connected freight rail rolling stock: a modular approach integrating sensors, actors and cyber physical systems for operational advantages and condition based maintenance
T2  - Asia-Pacific Conference of the Prognostics and Health Management Society
Y1  - 2017
N1  - Asia-Pacific Conference of the
Prognostics and Health Management Society, Jeju, Korea 2017
SP  - 1
EP  - 7
ER  -