TY - JOUR A1 - Feuerriegel, Uwe A1 - Stahlberg, R. A1 - Weisenburger, P. A1 - Steiger, F. T1 - Massen- und Energiebilanzen unter Einbeziehung der Untersuchungen an der Thermoselect-Anlage Fondotoce (Italien). Stahlberg, R.; Feuerriegel, U.; Weisenburger, P.; Steiger, F. JF - Thermoselect : der neue Weg, Restmüll umweltgerecht zu behandeln ; [Tagungsband zur Fachtagung Thermoselect am 19. Januar 1995 in Rastatt/Baden] / Günther Häßler. 2. durchges. und erw. Aufl. Y1 - 1995 SN - 3-9803665-4-5 N1 - Fachtagung THERMOSELECT ; (1995, Rastatt) ; Fachtagung Thermoselect ; (1995.01.19 : ; Rastatt) SP - 55 EP - 84 PB - Goerner CY - Karlsruhe ER - TY - JOUR A1 - Feuerriegel, Uwe A1 - Künsch, M. A1 - Stahlberg, R. A1 - Steiger, F. T1 - Massen- und Energiebilanz des Thermoselect-Verfahrens JF - Thermoselect-Verfahren zur Ent- und Vergasung von Abfällen / Franz J. Schweitzer [Hrsg.] Y1 - 1994 SN - 3-924511-47-0 PB - EF-Verl. für Energie- u. Umwelttechnik CY - Berlin ER - TY - JOUR A1 - Vieira da Silva, Maria Eugenia A1 - Schwarzer, Klemens A1 - Hoffschmidt, Bernhard A1 - Pinheiro Rodrigues, Frederico A1 - Schwarzer, Tarik A1 - Costa Rocha, Paulo Alexandre T1 - Mass transfer correlation for evaporation–condensation thermal process in the range of 70 °C–95 °C JF - Renewable energy Y1 - 2013 SN - 1879-0682 (E-Journal); 0960-1481 (Print) VL - Vol. 53 SP - 174 EP - 179 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Ritz, Thomas T1 - Mass Customized Production of Information Services - The combination of economies-of-scale with economies-of-scope JF - Media firms : structures, operations, and performance ; [World Media Economics Conference, 5th : 2002 : Turku, Finland] / ed. by Robert G. Picard Y1 - 2002 SN - 0-8058-4165-2 N1 - World Media Economics Conference (5, 2002, Turku) PB - Erlbaum CY - Mahwah, NJ [u.a.] ER - TY - JOUR A1 - Butenweg, Christoph A1 - Marinkovic, Marko A1 - Kubalski, Thomas A1 - Klinkel, Sven T1 - Masonry infilled reinforced concrete frames under horizontal loading T1 - Stahlbetonrahmen mit Ausfachungen aus Mauerwerk unter horizontalen Belastungen JF - Mauerwerk N2 - The behaviour of infilled reinforced concrete frames under horizontal load has been widely investigated, both experimentally and numerically. Since experimental tests represent large investments, numerical simulations offer an efficient approach for a more comprehensive analysis. When RC frames with masonry infill walls are subjected to horizontal loading, their behaviour is highly non-linear after a certain limit, which makes their analysis quite difficult. The non-linear behaviour results from the complex inelastic material properties of the concrete, infill wall and conditions at the wall-frame interface. In order to investigate this non-linear behaviour in detail, a finite element model using a micro modelling approach is developed, which is able to predict the complex non-linear behaviour resulting from the different materials and their interaction. Concrete and bricks are represented by a non-linear material model, while each reinforcement bar is represented as an individual part installed in the concrete part and behaving elasto-plastically. Each brick is modelled individually and connected taking into account the non-linearity of a brick mortar interface. The same approach is followed using two finite element software packages and the results are compared with the experimental results. The numerical models show a good agreement with the experiments in predicting the overall behaviour, but also very good matching for strength capacity and drift. The results emphasize the quality and the valuable contribution of the numerical models for use in parametric studies, which are needed for the derivation of design recommendations for infilled frame structures. Y1 - 2016 U6 - https://doi.org/10.1002/dama.201600703 SN - 1437-1022 VL - 20 IS - 4 SP - 305 EP - 312 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Altherr, Lena A1 - Ederer, Thorsten A1 - Pfetsch, Marc E. A1 - Pelz, Peter F. T1 - Maschinelles Design eines optimalen Getriebes JF - ATZ - Automobiltechnische Zeitschrift N2 - Nahezu 100.000 denkbare Strukturen kann ein Getriebe bei gleicher Funktion aufweisen - je nach Ganganzahl und gefordertem Freiheitsgrad. Mit dem traditionellen Ansatz bei der Entwicklung, einzelne vielversprechende Systemkonfigurationen manuell zu identifizieren und zu vergleichen, können leicht innovative und vor allem kostenminimale Lösungen übersehen werden. Im Rahmen eines Forschungsprojekts hat die TU Darmstadt spezielle Optimierungsmethoden angewendet, um auch bei großen Lösungsräumen zielsicher ein für die individuellen Zielstellungen optimales Layout zu finden. Y1 - 2018 SN - 2192-8800 U6 - https://doi.org/10.1007/s35148-018-0131-3 VL - 120 IS - 10 SP - 72 EP - 77 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Gerhardt, Hans Joachim A1 - Korath, Bernd T1 - Maschinelle Rauchableitung in besonderen Bauarten JF - vfdb-Zeitschrift. 53 (2004), H. 4 Y1 - 2004 SN - 0042-1804 SP - 198 EP - 204 ER - TY - JOUR A1 - Fabo, Sabine T1 - Marti Guixé : Parasitisierung durch das Objekt als Fata Morgana der Funktion JF - Kunstforum international Y1 - 2007 SN - 0177-3674 N1 - Ein Gespräch von Sabine Fabo VL - 2007 IS - 185 SP - 164 ER - TY - JOUR A1 - Wolf, Martin R. A1 - Armbruster, S. A1 - Schlick, Christopher A1 - Simon, S. T1 - Marktübersicht Telekooperationssysteme / Wolf, M.; Armbruster, S.; Schlick, C.; Simon, S. JF - Elsa Insight (1997) Y1 - 1997 SP - 8 EP - 9 PB - - ER - TY - JOUR A1 - Wolf, Martin R. A1 - Armbruster, S. A1 - Schlick, Christopher A1 - Simon, S. T1 - Marktübersicht Telekooperationssysteme - Das IAW stellt im Internet umfangreiche Informationen über Telekooperationssysteme zur Verfügung / Wolf, M. ; Armbruster, S. ; Schlick, C. ; Simon, S. JF - FIR + IAW Mitteilungen. 29 (1997), H. 1 Y1 - 1997 SP - 11 EP - 12 PB - - ER - TY - JOUR A1 - Gebhardt, Andreas T1 - Marktentwicklung im Rapid Prototyping JF - Kunststoffe, München. 89 (1999), H. 11 Y1 - 1999 SN - 0023-5563 SP - 50 EP - 55 ER - TY - JOUR A1 - Holthaus-Sellheier, Ursula A1 - Blecken, Udo T1 - Marktdatenbasiertes Ertragsprognosemodell für die Projektentwicklung / Blecken, Udo; Holthaus, Ursula JF - Baubetrieb und Bauwirtschaft - Festschrift Prof. Gert Stadler Y1 - 2004 SN - 3-902465-09-3 SP - 251 EP - 269 PB - Verlag der TU Graz CY - Graz ER - TY - JOUR A1 - Schöning, Michael Josef A1 - Abouzar, Maryam H. A1 - Poghossian, Arshak A1 - Han, Yinhua A1 - Offenhäusser, Andreas A1 - Ingebrandt, Sven T1 - Markierungsfreie DNA-Detektion mit Silizium-Feldeffekt-Sensoren – Messeffekte oder Artefakte? JF - tm - Technisches Messen . 74 (2007), H. 9 Y1 - 2007 SN - 0171-8096 SP - 466 EP - 476 ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Ehrfeld, W. A1 - Hessel, V. A1 - Lacher, M. T1 - Market oriented development and production of microdevices. Ehrfeld, W.; Hessel, V.; Kämper, K.-P.; Lacher, M.; Picard, A.; Schmidt, M.; Schulz, C. JF - Proceedings : 21th International Conference on Microelectronics : MIEL '97 ; Niš, Yugoslavia, 14-17 September 1997. Vol. 1 Y1 - 1997 SN - 0-7803-3664-X SP - 71 EP - 79 PB - IEEE Service Center CY - Piscataway, NJ ER - TY - JOUR A1 - Baumann, Marcus A1 - Krämer, M. T1 - Marine Planktonalgen der Arktis II. Diatomeen / Baumann, M. ; Krämer, M. JF - Mikrokosmos. 75 (1986), H. 10 Y1 - 1986 SN - 0026-3680 SP - 306 EP - 310 ER - TY - JOUR A1 - Baumann, Marcus A1 - Jahnke, J. T1 - Marine Planktonalgen der Arktis I. Die Haptophycee Phaeocystis pouchetii / Baumann, M. ; Jahnke, J. JF - Mikrokosmos. 75 (1986), H. 9 Y1 - 1986 SN - 0026-3680 SP - 262 EP - 265 ER - TY - JOUR A1 - Schäfer, Horst A1 - Böttcher, A. T1 - Mapping of magnetic domain structures inside of ferromagnetic materials by X-ray topography JF - Physica Status Solidi (A). 113 (1989) Y1 - 1989 SN - 0031-8965 SP - 551 ER - TY - JOUR A1 - Göttsche, Joachim A1 - Hove, T. T1 - Mapping global, diffuse and beam solar radiation over Zimbabwe / T. Hove ; J. Göttsche JF - Renewable energy. 18 (1999), H. 4 Y1 - 1999 SN - 1879-0682 SP - 535 EP - 556 ER - TY - JOUR A1 - Grotendorst, Johannes T1 - Maple programs for converting series expansions to rational functions using the Levin transformation automatic generation of FORTRAN functions for numerical applications JF - Computer Physics Communications. 55 (1991), H. 3 Y1 - 1991 SN - 0010-4655 SP - 325 EP - 335 ER - TY - JOUR A1 - Otten, Dennis A1 - Weber, Tobias A1 - Arent, Jan-Christoph T1 - Manufacturing Process Simulation – On Its Way to Industrial Application JF - International Journal of Aviation, Aeronautics, and Aerospace N2 - Manufacturing process simulation (MPS) has become more and more important for aviation and the automobile industry. A highly competitive market requires the use of high performance metals and composite materials in combination with reduced manufacturing cost and time as well as a minimization of the time to market for a new product. However, the use of such materials is expensive and requires sophisticated manufacturing processes. An experience based process and tooling design followed by a lengthy trial-and-error optimization is just not contemporary anymore. Instead, a tooling design process aided by simulation is used more often. This paper provides an overview of the capabilities of MPS in the fields of sheet metal forming and prepreg autoclave manufacturing of composite parts summarizing the resulting benefits for tooling design and manufacturing engineering. The simulation technology is explained briefly in order to show several simplification and optimization techniques for developing industrialized simulation approaches. Small case studies provide examples of an efficient application on an industrial scale. Y1 - 2018 U6 - https://doi.org/10.15394/ijaaa.2018.1217 SN - 2374-6793 VL - 5 IS - 2 PB - Embry-Riddle Aeronautical University CY - Daytona Beach, Fla. ER - TY - JOUR A1 - Hellmanns, Mark A1 - Böhm, Stefan A1 - Dilger, Klaus T1 - Manual applications of adhesives JF - Journal of adhesion and interface Y1 - 2006 VL - Vol. 7 IS - No. 4 SP - 24 EP - 27 ER - TY - JOUR A1 - Schmidt, Rolf A1 - Hebel, Christoph T1 - Makroskopische Verkehrssimulationsmodelle in der kommunalen Planungspraxis JF - Stadt Region Land (2009) Y1 - 2009 SN - 0344-9645 SP - 63 EP - 72 PB - RWTH Aachen CY - Aachen ER - TY - JOUR A1 - Hebel, Christoph T1 - Makroskopische Personenverkehrsnachfragemodelle: Anwendungspraxis in deutschen Großstädten JF - Ansprüche einer mobilen Gesellschaft an ein verlässliches Verkehrssystem / hrsg. Deutsche Verkehrswissenschaftliche Gesellschaft e. V Y1 - 2011 SN - 978-3-942488-05-1 N1 - DVWG-Jahresband ; 2009/10 SP - 226 EP - 231 PB - Dt. Verkehrswiss. Ges. CY - Berlin ER - TY - JOUR A1 - Schmidt, Aaron C. A1 - Turgut, Hatice A1 - Le, Dao A1 - Beloqui, Ana A1 - Delaittre, Guillaume T1 - Making the best of it: nitroxide-mediated polymerization of methacrylates via the copolymerization approach with functional styrenics JF - Polymer Chemistry N2 - The SG1-mediated solution polymerization of methyl methacrylate (MMA) and oligo(ethylene glycol) methacrylate (OEGMA, Mₙ = 300 g mol⁻¹) in the presence of a small amount of functional/reactive styrenic comonomer is investigated. Moieties such as pentafluorophenyl ester, triphenylphosphine, azide, pentafluorophenyl, halide, and pyridine are considered. A comonomer fraction as low as 5 mol% typically results in a controlled/living behavior, at least up to 50% conversion. Chain extensions with styrene for both systems were successfully performed. Variation of physical properties such as refractive index (for MMA) and phase transition temperature (for OEGMA) were evaluated by comparing to 100% pure homopolymers. The introduction of an activated ester styrene derivative in the polymerization of OEGMA allows for the synthesis of reactive and hydrophilic polymer brushes with defined thickness. Finally, using the example of pentafluorostyrene as controlling comonomer, it is demonstrated that functional PMMA-b-PS are able to maintain a phase separation ability, as evidenced by the formation of nanostructured thin films. Y1 - 2020 U6 - https://doi.org/10.1039/C9PY01458F VL - 11 IS - 2 SP - 593 EP - 604 PB - Royal Society of Chemistry (RSC) CY - Cambridge ER - TY - JOUR A1 - Faßbender, Heinz A1 - Bühler, Gerhard T1 - Making a C2 information system platform independent by using internet and middleware technologies JF - Proceedings of the 1999 Command and Control Research and Technology Symposium, Juni 1999, Newport, USA Y1 - 1999 SP - 1 EP - 11 ER - TY - JOUR A1 - Dachwald, Bernd A1 - Seboldt, Wolfgang A1 - Loeb, H. W. A1 - Schartner, Karl-Heinz T1 - Main Belt Asteroid Sample Return Mission Using Solar Electric Propulsion JF - Acta Astronautica. 63 (2008), H. 1-4 Y1 - 2008 SN - 0094-5765 N1 - International Astronautical Federation Congress <58, 2007, Hyderabad> ; International Astronautical Congress <58, 2007, Hyderabad> ; IAC-07-A3.5.07 SP - 91 EP - 101 ER - TY - JOUR A1 - Tippkötter, Nils A1 - Wollny, S. A1 - Kampeis, P. A1 - Oster, J. A1 - Schneider, H. A1 - Ulber, Roland T1 - Magnetseparation von Proteinen : Separation von Zielmolekülen durch hochselektive Aptamere JF - GIT Labor-Fachzeitschrift N2 - Durch die Kombination von Oligonukleotid-Liganden (Aptameren) hoher Bindungsaffinitäten mit hochselektiv abtrennbaren magnetisierbaren Mikropartikeln wird eine einstufige Separation von Zielmolekülen aus mikrobiologischen Produktionsansätzen möglich. Die Aptamere werden hierfür reversibel auf den Partikeloberflächen gebunden und für die spezifische Isolierung von Bioprodukten eingesetzt. Die Abtrennung der beladenen Partikel erfolgt durch einen neuen Rotor-Stator-Separator mit Hochgradient-Magnetfeld. Y1 - 2011 VL - 55 IS - 10 SP - 666 PB - Wiley CY - Weinheim ER - TY - JOUR A1 - Bechstedt, U. A1 - Haas, H. A1 - Hacker, U. A1 - Hardt, Arno A1 - Henn, K. A1 - Martin, S. A1 - Wimmer, J. T1 - Magnets for the German Spallation Source SNQ JF - IEEE transactions on nuclear science. Vol. 32, iss. 5 Y1 - 1985 SN - 1558-1578 (E-Journal); 0018-9499 (Print) SP - 3631 EP - 3633 ER - TY - JOUR A1 - Reißel, Martin A1 - Hirschfeld, Julian A. A1 - Lustfeld, Hans A1 - Steffen, Bernhard T1 - Magnetotomography and Electric Currents in a Fuel Cell / Lustfeld, H. ; Reißel, M. ; Steffen, B. JF - Fuel Cells. 9 (2009), H. 4 Y1 - 2009 SN - 1615-6854 SP - 474 EP - 481 PB - Wiley-VCH CY - Weinheim ER - TY - JOUR A1 - Förster, Arnold A1 - Betko, J. A1 - Morvic, M. A1 - Novak, J. T1 - Magnetoresistance in low-temperature grown molecular-beam epitaxial GaAs. Betko, J.; Morvic, M.; Novak, J.; Förster, A.; Kordos, P. JF - Journal of Applied Physics. 86 (1999), H. 11 Y1 - 1999 SN - 1089-7550 SP - 6243 EP - 6248 ER - TY - JOUR A1 - Hüning, Felix A1 - Luken, Heiko A1 - Schilder, Herbert A1 - Eifert, Thomas T1 - Magnetochemistry: Compounds and Concepts / Lueken, Heiko ; Schilder, Herbert ; Eifert, Thomas ; Handrick, Klaus ; Hüning, Felix JF - Advances in Solid State Physics. 201 (2001) Y1 - 2001 SP - 515 EP - 532 PB - - ER - TY - JOUR A1 - Kämper, Klaus-Peter A1 - Pappas, D. P. A1 - Miller, B. P. A1 - Hopster, H. T1 - Magnetism of ultrathin films of Fe on Cu(100). Pappas, D. P; Kämper, K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Luntz, A. C.; Brundle, C.R.; Shen, Z.-X. JF - Journal of Applied Physics. 69 (1991), H. 8 Y1 - 1991 SN - 1089-7550 SP - 5209 EP - 521 ER - TY - JOUR A1 - Mang, Thomas T1 - Magnetische Mikro- und Nanopartikel für Medizin und Biotechnik JF - Wässrige Kunststoffdispersionen und ihre Anwendung : Fachbereich Angewandte Naturwissenschaften und Technik / Fachhochschule Aachen. [Schriftleitung: Thomas Mang ...] Y1 - 2005 N1 - FH-Texte ; 71 ; Makromolekulares Kolloquium FH Aachen SP - 137 EP - 150 PB - Fachhochschule Aachen CY - Aachen ER - TY - JOUR A1 - Engelmann, Ulrich M. A1 - Buhl, Eva Miriam A1 - Draack, Sebastian A1 - Viereck, Thilo A1 - Frank, A1 - Schmitz-Rode, Thomas A1 - Slabu, Ioana T1 - Magnetic relaxation of agglomerated and immobilized iron oxide nanoparticles for hyperthermia and imaging applications JF - IEEE Magnetic Letters N2 - Magnetic nanoparticles (MNPs) are used as therapeutic and diagnostic agents for local delivery of heat and image contrast enhancement in diseased tissue. Besides magnetization, the most important parameter that determines their performance for these applications is their magnetic relaxation, which can be affected when MNPs immobilize and agglomerate inside tissues. In this letter, we investigate different MNP agglomeration states for their magnetic relaxation properties under excitation in alternating fields and relate this to their heating efficiency and imaging properties. With focus on magnetic fluid hyperthermia, two different trends in MNP heating efficiency are measured: an increase by up to 23% for agglomerated MNP in suspension and a decrease by up to 28% for mixed states of agglomerated and immobilized MNP, which indicates that immobilization is the dominant effect. The same comparatively moderate effects are obtained for the signal amplitude in magnetic particle spectroscopy. Y1 - 2018 U6 - https://doi.org/10.1109/LMAG.2018.2879034 SN - 1949-307X VL - 9 IS - Article number 8519617 PB - IEEE CY - New York, NY ER - TY - JOUR A1 - Rabehi, Amine A1 - Garlan, Benjamin A1 - Achtsnicht, Stefan A1 - Krause, Hans-Joachim A1 - Offenhäusser, Andreas A1 - Ngo, Kieu A1 - Neveu, Sophie A1 - Graff-Dubois, Stephanie A1 - Kokabi, Hamid T1 - Magnetic detection structure for Lab-on-Chip applications based on the frequency mixing technique JF - Sensors N2 - A magnetic frequency mixing technique with a set of miniaturized planar coils was investigated for use with a completely integrated Lab-on-Chip (LoC) pathogen sensing system. The system allows the detection and quantification of superparamagnetic beads. Additionally, in terms of magnetic nanoparticle characterization ability, the system can be used for immunoassays using the beads as markers. Analytical calculations and simulations for both excitation and pick-up coils are presented; the goal was to investigate the miniaturization of simple and cost-effective planar spiral coils. Following these calculations, a Printed Circuit Board (PCB) prototype was designed, manufactured, and tested for limit of detection, linear response, and validation of theoretical concepts. Using the magnetic frequency mixing technique, a limit of detection of 15 µg/mL of 20 nm core-sized nanoparticles was achieved without any shielding. KW - Lab-on-Chip KW - magnetic sensing KW - frequency mixing KW - superparamagnetic nanoparticles KW - magnetic beads Y1 - 2018 U6 - https://doi.org/10.3390/s18061747 SN - 1424-8220 VL - 18 IS - 6 PB - MDPI CY - Basel ER - TY - JOUR A1 - Martius, Alexander T1 - Magister Iuris Communis - Master of European and Comparative Law (LL M) in Maastricht, Niederlande JF - Juristische Schulung : JuS ; Zeitschrift für Studium und Referendariat Y1 - 1997 SN - 0022-6939 SP - 766 EP - 768 ER - TY - JOUR A1 - Eijck, Lambert van A1 - Demmel, Franz A1 - Artmann, Gerhard A1 - Stadtler, Andreas Maximilian T1 - Macromolecular dynamics in red blood cells investigated using neutron spectroscopy JF - Journal of the Royal Society Interface Y1 - 2011 SN - 1742-5689 VL - 8 IS - 57 SP - 590 EP - 600 PB - The Royal Society CY - London ER - TY - JOUR A1 - Schmitt, Robert A1 - Scholl, Ingrid A1 - Cai, Yu A1 - Xia, Ji A1 - Dziwoki, Paul A1 - Harding, Martin A1 - Pavim, Alberto T1 - Machine vision system for inline inspection in carbide insert production JF - Proceedings of the 36th International MATADOR Conference N2 - In steps of the production chain of carbide inserts, such as unloading or packaging, the conformity test of the insert type is done manually, which causes a statistic increase of errors due to monotony and fatigue of the worker and the wide variety of the insert types. A machine vision system is introduced that captures digital frames of the inserts in the production line, analyses inspects automatically and measures four quality features: coating colour, edge radius, plate shape and chip-former geometry. This new method has been tested on several inserts of different types and has shown that the prevalent insert types can be inspected and robustly classified in real production environment and therefore improves the manufacturing automation. Y1 - 2010 SN - 978-1-84996-431-9 U6 - https://doi.org/10.1007/978-1-84996-432-6_77 N1 - 36th MATADOR Conference, University of Manchester, July 2010 SP - 339 EP - 342 PB - Springer CY - Berlin ER - TY - JOUR A1 - Ziebura, Dawid A1 - Bremen, Sebastian A1 - Schleifenbaum, Johannes Henrich A1 - Gebhardt, Andreas T1 - Machbarkeitsstudie zur Verarbeitung von nicht rostendem Stahl 1.4404 unter Verwendung einer Diodenlaser-basierten LPBF-Maschine mit kartesischem Achssystem JF - RTejournal - Forum für Rapid Technologie Y1 - 2018 SN - 1614-0923 VL - 15 ER - TY - JOUR A1 - Grap, Rolf Dietmar T1 - Machbarkeitsstudie : Wann Gruppenarbeit möglich ist JF - Der Industrie-Meister: Fachzeitschrift für Führung, Technik, Weiterbildung. 28 (1999), H. 12 Y1 - 1999 SN - 0537-5770 ; 0940-843 SP - 9 EP - 12 ER - TY - JOUR A1 - Fornaciari, Andrea A1 - Guidetti, Marco A1 - Havermann, Marc A1 - Lettini, Antonio T1 - Maccine mobili più efficienti JF - Fluidotecnica N2 - Secondo le attuali normative tutte le macchine mobili, entro il 2012, dovranno essere soggette a un incremento di efficienza energetica. Un’evoluzione del sistema idraulico potrà contribuire in maniera significativa al miglioramento richiesto. Elettronica e idraulica sempre più protagoniste. Y1 - 2010 IS - 345 SP - 11 EP - 14 PB - Quine Business Publisher CY - Milano ER - TY - JOUR A1 - Naujokat, Anke T1 - Maastricht: Vorpremiere der neuen Dependance des NAi JF - Bauwelt. 96 (2005), H. 13 Y1 - 2005 SN - 0931-6590 SP - 2 ER - TY - JOUR A1 - Gerhardt, Hans Joachim T1 - Lösungskonzept zur Belüftung von Rottehallen JF - Abfallwirtschaftsjournal. 6 (1994), H. 10 Y1 - 1994 SN - 0934-6422 SP - 689 EP - 692 ER - TY - JOUR A1 - Kasch, Susanne A1 - Schmidt, Thomas A1 - Jahn, Simon A1 - Eichler, Fabian A1 - Thurn, Laura A1 - Bremen, Sebastian T1 - Lösungsansätze und Verfahrenskonzepte zum Laserstrahlschmelzen von Glas JF - Schweissen und Schneiden Y1 - 2021 SN - 0036-7184 VL - 73 IS - Heft 1-2 SP - 32 EP - 39 PB - DVS Verlag CY - Düsseldorf ER - TY - JOUR A1 - Kern, Alexander A1 - Zischank, Wolfgang J. T1 - Längsspannung an blitzstromdurchflossenen Schirmkabeln - Einfluß paralleler Entlastungsleitungen JF - Elektrie : wissenschaftlich-technische Zeitschrift der Elektrotechnik. 47 (1993), H. 6 Y1 - 1993 SN - 0013-5399 N1 - 2. ISSN: 0013-5400 ER - TY - JOUR A1 - Enning, Manfred A1 - Zambou, Nathan A1 - Abel, Dirk T1 - Längsdynamikregelung eines Fahrzeugkonvois mit Hilfe der Modellgestützten Prädiktiven Regelung / Zambou, N. ; Enning, M. ; Abel, D. JF - Telematik 2003 : Tagung Siegen, 17. und 18. Juni 2003 / VDI-VDE-Gesellschaft Mess- und Automatisierungstechnik Y1 - 2003 SN - 3-18-091785-7 N1 - VDI-Berichte ; 1785 SP - 12 S. PB - VDI-Verl. CY - Düsseldorf ER - TY - JOUR A1 - Heuermann, Holger T1 - LZY: A Self-Calibration Approach in Competition to the LRM Method for On-Wafer Measurements Y1 - 1995 N1 - 45th ARFTG Conference digest, Spring 1995 : [conference topic: Testing and design of RFIC'S], May 19, 1995, Orange County Convention Center, Orlando, Florida / Automatic RF Techniques Group. Publications chairman: Ed Godshalk; ARFTG Conference digest ; 4 SP - 129 EP - 136 ER - TY - JOUR A1 - Sommer, Angela M. A1 - Bitz, Andreas A1 - Streckert, Joachim A1 - Hansen, Volkert W. A1 - Lerchl, Alexander T1 - Lymphoma development in mice chronically exposed to UMTS-modulated radiofrequency electromagnetic fields JF - Radiation Research Y1 - 2007 U6 - https://doi.org/10.1667/RR0857.1 SN - 1938-5404 VL - 168 IS - 1 SP - 72 EP - 80 ER - TY - JOUR A1 - Gerhardt, Hans Joachim T1 - Lufttechnische Prüfungen von Abzügen - Kritische Anmerkungen zur Prüfvorschrift DIN 12 924 Teil 1 JF - GIT Spezial: Arbeitschutz (1994) Y1 - 1994 SN - 0940-032X SP - 90 EP - 95 ER - TY - JOUR A1 - Esch, Thomas A1 - Pischinger, Martin A1 - Göbel, T. T1 - Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung JF - Motortechnische Zeitschrift. 57 (1996), H. 2 Y1 - 1996 SN - 0024-8525 SP - 106 EP - 115 ER -