TY  - CHAP
A1  - Merten, Sabine
A1  - Conrad, Thorsten
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Schütze, Andreas
T1  - Virtual Technology Labs - an efficient tool for the preparation of hands-on-MEMS-courses in training foundries
N2  - Hands-on-training in high technology areas is usually limited due to the high cost for lab infrastructure and equipment. One specific example is the field of MEMS, where investment and upkeep of clean rooms with microtechnology equipment is either financed by production or R&D projects greatly reducing the availability for education purposes. For efficient hands-on-courses a MEMS training foundry, currently used jointly by six higher education institutions, was established at FH Kaiserslautern. In a typical one week course, students manufacture a micromachined pressure sensor including all lithography, thin film and packaging steps. This compact and yet complete program is only possible because participants learn to use the different complex machines in advance via a Virtual Training Lab (VTL). In this paper we present the concept of the MEMS training foundry and the VTL preparation together with results from a scientific evaluation of the VTL over the last three years.
KW  - Virtuelles Laboratorium
KW  - Virtuelles Labor
KW  - Hand-on-training
KW  - Virtual Technology Lab
KW  - MEMS ; education and training foundry
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
A1  - Buda, A.
A1  - Altrock, R.
T1  - The capability of bluetooth for real-time transmission in automation
T2  - Proceedings of the IASTED International Conference on Networks and Communication Systems 2006 : March 29 - 31, 2006, Chiang Mai, Thailand
Y1  - 2006
SP  - 168
EP  - 175
PB  - Acta Pr.
CY  - Anaheim, Calif.
ER  - 
TY  - CHAP
A1  - Gebhardt, Andreas
T1  - Technology Diffusion through a Multi-Level Technology Transfer Infrastructure. Contribution to the 1st. All Africa Technology Diffusion Conference Boksburg, South Africa June 12th - 14th 2006
N2  - Table of contents 1. Introduction 2. Multi-level Technology Transfer Infrastructure 2.1 Level 1: University Education – Encourage the Idea of becoming an Entrepreneur 2.2 Level 2: Post Graduate Education – Improve your skills and focus it on a product family. 2.3 Level 3: Birth of a Company – Focus your skills on a product and a market segment. 2.4 Level 4: Ready to stand alone – Set up your own business 2.5 Level 5: Grow to be Strong – Develop your business 2.6 Level 6: Competitive and independent – Stay innovative. 3. Samples 3.1 Sample 1: Laser Processing and Consulting Centre, LBBZ 3.2 Sample 2: Prototyping Centre, CP 4. Funding - Waste money or even lost Money? 5. Conclusion
KW  - Technologietransfer
KW  - technology transfer
KW  - technology diffusion
Y1  - 2006
ER  - 
TY  - BOOK
A1  - Mautner, Karin
T1  - Numerical treatment of the Black-Scholes variational inequality in computational finance
Y1  - 2006
N1  - Humboldt-Univ., Diss
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Vinsonneau, B.
A1  - Burnham, K. J.
T1  - Multiple models for nonlinear systems
T2  - Proceedings / Eigteenth International Conference on Systems Engineering : ICSE 2006 : 5 - 7 September 2006 ; [held at Coventry University, UK]
Y1  - 2006
SN  - 1-84600-013-0
SP  - 347
EP  - 352
ER  - 
TY  - THES
A1  - Pfaff, Raphael
T1  - Modelling of nonlinear systems using piecewise defined models
Y1  - 2006
N1  - Coventry, Univ., Masterarbeit, 2006
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Generative Manufacturing of Ceramic Parts "Vision Rapid Prototyping"
N2  - Table of Contents Introduction 1. Generative Manufacturing Processes 2. Classification of Generative Manufacturing Processes 3. Application of Generative Processes on the Fabrication of Ceramic Parts 3.1 Extrusion 3.2 3D-Printing 3.3 Sintering – Laser Sintering 3.4 Layer-Laminate Processes 3.5 Stereolithography (sometimes written: Stereo Lithography) 4. Layer Milling 5. Conclusion - Vision
KW  - Rapid prototyping
KW  - Rapid Technologie
KW  - Rapid Prototyping
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Stützle, Thorsten
A1  - Viereck, Uwe
A1  - Stribersky, Anton
T1  - Creepage control for use in wheelslide protection systems / Stützle, Thorsten ; Viereck, Uwe ; Stribersky, Anton ; Rulka, Wolfgang ; Enning, Manfred ; Abel, Dirk
JF  - Control in transportation systems : proceedings of the 11th IFAC symposium on control in transportation systems (CTS 2006), August 29-31, 2006, Delft, the Netherlands / International Federation of Automatic Control
Y1  - 2006
SN  - 0742-5953
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - Bonded connections for textile reinforced concrete structures
JF  - Cailiao-gongcheng = Journal of materials engineering
Y1  - 2006
SN  - 1001-4381
IS  - Special iss.
SP  - 123
EP  - 127
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, A.
A1  - Schütze, A.
A1  - Wallach, D.
T1  - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF  - Mst-News (2006)
Y1  - 2006
SN  - 0948-3128
SP  - 15, 16
EP  - u. 35
ER  -