TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Untersuchungen zum thermodynamischen Verhalten des Sauerstoffs in Kupfer-Wismut-Schmelzen bei 1200°C
JF  - Zeitschrift für Physikalische Chemie
Y1  - 1982
SN  - 0942-9352
VL  - 133
IS  - 2
SP  - 167
EP  - 174
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Untersuchungen zum Lösungsverhalten von Sauerstoff in Metallschmelzen
JF  - Neue Hütte : metallurgisch-metallkundliche Fachzeitschrift für Forschung und Praxis
Y1  - 1986
SN  - 0028-3207
VL  - 31
IS  - 7
SP  - 255
EP  - 258
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schiebahn, Alexander
T1  - Untersuchung zum Einfluss von Maschineneigenschaften von Schweißzangen zum Widerstandspunktschweißen auf das Schweißergebnis
JF  - Schweissen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 2013
SN  - 0036-7184
VL  - Bd. 65
IS  - H. 6
SP  - 309
EP  - 313
PB  - DVS Verl.
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Universelles Roboterprogrammiersystem zur Fertigung von Großfahrzeugen
JF  - Schweißen und Schneiden. 47 (1995), H. 9
Y1  - 1995
SN  - 0036-7184
SP  - 707
EP  - 713
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - http://dx.doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Berg, Alexander-Karl
A1  - Schleser, Markus
A1  - Delidovich, Artem
A1  - Houben, Alexander
T1  - Ultraschallunterstützter Schmelzklebstoffauftrag
JF  - adhäsion KLEBEN & DICHTEN
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s35145-018-0089-z
VL  - Volume 62
IS  - Issue 12
SP  - 32
EP  - 37
PB  - Springer
ER  - 
TY  - JOUR
A1  - Enning, Manfred
A1  - Kinoo, B.
A1  - Krüger, M.
A1  - Schloßer, A.
T1  - Turbodiesel fährt umweltfreundlich ins nächste Jahrtausend. Neue Regelungs- und Steuerungsverfahren verbessern Fahrdynamik und Emissionsverhalten / Enning, M. ; Kinoo, B. ; Krüger, M. ; Schloßer, A.
JF  - RWTH-Themen. 1999 (1999), H. 2
Y1  - 1999
N1  - RWTH-Themen 2/1999: Automobiltechnik
SP  - 86
EP  - 91
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - TSN – Schluss mit dem Feldbuskrieg?
JF  - Design & Elektronik
Y1  - 2018
SN  - 0933-8667
N1  - Echtzeit für Industrie 4.0. - Teil 3
IS  - 3
SP  - 26
EP  - 31
PB  - WEKA-Fachmedien
CY  - München
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
A1  - Plum, H.D.
A1  - Mathar, W.
A1  - Wolf, M.
T1  - TrueForm - erste Anwendung des neuen Sintermaterials mit Vakuumgießen und Investmentgießen
Y1  - 1996
N1  - Konferenz-Einzelbericht : RPD, Internat. Conf. on Rapid Product Development, Proc., Stuttgart, DE,  Jun 10-11
SP  - 231
EP  - 236
ER  - 
TY  - JOUR
A1  - Bucur, Alexandru
A1  - Lazarescu, Lucian
A1  - Pop, Grigore Marian
A1  - Achimas, Gheorghe
A1  - Gebhardt, Andreas
T1  - Tribological performance of biodegradable lubricants under different surface roughness of tools
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 1
SP  - 172
EP  - 178
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Kaminsky, R.
A1  - Rossi, M.
A1  - Morbiducci, U.
T1  - Time resolved PIV technique for high temporal resolution measurements of prosthetic heart valves fluid dynamics / Kaminsky, R. ; Rossi, M. ; Morbiducci, U. ; Scalise, L. ; Catellini, P. ; Kallweit, S. ; Verdonck, P. ; Grigioni, M.
JF  - The International Journal of Artificial Organs. 28 (2005), H. 9
Y1  - 2005
SN  - 1724-6040
N1  - Abstracts: XXXII Annual ESAO Congress, 5-8 October 2005, Bologna - Italy
SP  - 946
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Vanlanduit, S.
A1  - Vanherzeele, J.
A1  - Brouns, M.
T1  - Time resolved PIV reconstruction of periodic flows / Vanlanduit, S. ; Vanherzeele, J. ; Kallweit, S. ; Brouns, M. ; Guillaume, P.
JF  - PIV'07, 7th International Symposium on Particle Image Velocimetry, Roma, IT, Sep 11-14, 2007
Y1  - 2007
N1  - PIV, Internional Symposium on Particle Image Velocimetry, 7 ; Datei: Vanlanduit.pdf
SP  - 1
EP  - 14
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Wesner, D. A.
A1  - Güntherodt, G.
T1  - Thickness dependence of the spin- and angle-resolved photoemission of ultrathin, epitaxial Ni(111)/W(110) layers
JF  - Applied Physics A: Materials Science and Processing. 49 (1989), H. 6
Y1  - 1989
SN  - 1432-0630
SP  - 573
EP  - 578
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Thickness dependence of the electronic structure of ultrathin, epitaxial Ni(111)/W(110) layers.
JF  - Physical Review B. 38 (1988), H. 14
Y1  - 1988
SN  - 1095-3795
SP  - 9451
EP  - 9456
ER  - 
TY  - JOUR
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)
JF  - Journal of tribology
Y1  - 1985
SN  - 0742-4787
SN  - 1528-8897
VL  - 107
IS  - 4
SP  - 527
EP  - 537
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the lead-antimony system at 1173 K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1987
SN  - 0044-2658
VL  - 40
IS  - 6
SP  - 316
EP  - 319
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the copper-antimony system at 1473K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1988
SN  - 0044-2658
VL  - 41
IS  - 10
SP  - 498
EP  - 501
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1984
SN  - 0940-483X
SN  - 0005-9021
VL  - 88
IS  - 8
SP  - 707
EP  - 710
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1987
SN  - 0940-483X
SN  - 0005-9021
VL  - 91
IS  - 7
SP  - 790
EP  - 794
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Thermodynamic relations between component activities and gas solubilities in binary metallic systems
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1985
SN  - 0940-483X
SN  - 0005-9021
VL  - 89
IS  - 2
SP  - 130
EP  - 134
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Kapoor, Madan Lal
A1  - Frohberg, Martin G.
T1  - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 1
SP  - 53
EP  - 58
ER  - 
TY  - JOUR
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Thermisches Direktfügen von Metall und Kusntstoff: eine Alternative zur Klebtechnik
JF  - Adhäsion : Kleben & Dichten
N2  - Im Rahmen des Exzellenzclusters „Integrative Produktionstechnik für Hochlohnländer“ der RWTHAachen University werden derzeit alternative Verfahren zur Herstellung von Metall/Kunststoff- Verbindungen untersucht. Eines davon ist das thermische Direktfügen, das eine stoffschlüssige Verbindung zwischen Kunststoff und Metall ermöglicht und ohne die Verwendung von Klebstoffen, Haftvermittlern oder mechanischen Verbindungshilfen auskommt.
Y1  - 2012
U6  - http://dx.doi.org/10.1007/s35145-012-0005-x
SN  - 0001-8198 (E-Journal); 0001-8198 (Print)
N1  - Printausg. in der Bibliothek der FH Aachen vorhanden: 63 Z 807-2012
VL  - 56
IS  - 11
SP  - 36
EP  - 40
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlef (u.a.)
T1  - The Virtual Cleanroom – a new tool in teaching MST process technologies
JF  - mst news International newsletter on micro - nano Integration (2003)
Y1  - 2003
SN  - 0948-3128
SP  - 35
EP  - 36
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, Antoni
A1  - Brill, Manfred
A1  - Cassel, Detlev
A1  - Jentsch, Andreas
A1  - Merten, Sabine
A1  - Rollwa, Markus
T1  - The Virtual Clean Room - a new tool in teaching MST process technologies
N2  - The Virtual Clean Room - a new tool in teaching MST process technologies University education in high-technology fields like MST is not complete without intensive laboratory sessions. Students cannot fully grasp the complexity and the special problems related to the manufacturing of microsystems without a thorough hands-on experience in a MST clean room.
KW  - Virtuelle Maschine
KW  - VM
KW  - Mikrosystemtechnik
KW  - MST
KW  - virtual clean room
Y1  - 2003
ER  - 
TY  - JOUR
A1  - Hanrath, Wilhelm
A1  - Plesken, Wilhelm
T1  - The lattices of six-dimensional euclidean space
JF  - Mathematics of computation. 43 (1984), H. 168
Y1  - 1984
SN  - 0025-5718
SP  - 573
EP  - 587
ER  - 
TY  - JOUR
A1  - Panc, Nicolae
A1  - Contiu, Glad
A1  - Bocanet, Vlad
A1  - Thurn, Laura
A1  - Sabau, Emilia
T1  - The influence of cutting technology on surface wear hardness
JF  - Academic Journal of Manufacturing Engineering
Y1  - 2019
SN  - 1583-7904
VL  - 17
IS  - 3
SP  - 205
EP  - 210
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - The influence of adsorbates on the spin-resolved photoemission of Ni(110). Schmitt, W.; Kämper, K.-P.; Güntherodt, G.
JF  - Surface Science. 189/190 (1987)
Y1  - 1987
SN  - 0039-6028
N1  - Proceedings of the Ninth European Conference on Surface Science
SP  - 741
EP  - 507
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The calculation of component activities of binary metallic melts from their gas solubilities
JF  - Zeitschrift für Metallkunde
Y1  - 1985
SN  - 0044-3093
VL  - 76
IS  - 2
SP  - 135
EP  - 137
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 10
SP  - 665
EP  - 666
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature dependence of the exchange splitting of Ni along the -L line
JF  - Journal de physique. 49 (1988), H. 12. Supplement, Colloque C8
Y1  - 1988
N1  - Proceedings of the International conference on Magnetism. Part 1. ICM 88, Paris, France, Juli 25-29, 1988
SP  - 39
EP  - 40
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Temperature and wave-vector dependence of the spin-split band structure of Ni(111) along the Γ-L line
JF  - Physical Review B. 42 (1990), H. 16
Y1  - 1990
SN  - 1095-3795
SP  - 10696
EP  - 10705
ER  - 
TY  - JOUR
A1  - Thomas, Axel
T1  - Technologiezentren in der Aachener Region – Retrospektiven und Perspektiven
JF  - VM Verwaltung und Management
Y1  - 2018
U6  - http://dx.doi.org/10.5771/0947-9856-2018-3-147
SN  - 0947-9856
VL  - 24
IS  - 3
SP  - 147
EP  - 156
PB  - Nomos
CY  - Baden-Baden
ER  - 
TY  - JOUR
A1  - Klocke, Martina
T1  - Study Units in the CIM-Oriented Study Factory
JF  - Qualification for Computer-Integrated Manufacturing. Hrsg.: Felix Rauner
Y1  - 1995
SN  - 3-540-19971-3
SP  - 38
EP  - 51
PB  - Springer
CY  - Berlin [u.a.]
ER  - 
TY  - JOUR
A1  - Henn, Gudrun
A1  - Polaczek, Christa
T1  - Studienerfolg in den Ingenieurwissenschaften
JF  - Das Hochschulwesen : HSW ; Forum für Hochschulforschung, -praxis und -politik
Y1  - 2007
SN  - 0018-2974
VL  - 55
IS  - 5
SP  - 144
EP  - 147
ER  - 
TY  - JOUR
A1  - Wilbring, Daniela
A1  - Enning, Manfred
T1  - Stromversorgung auf Güterwagen - Aktuelle Bemühungen zur Standardisierung
JF  - ETR - Eisenbahntechnische Rundschau
Y1  - 2019
SN  - 0013-2845
VL  - 68
IS  - 11
SP  - 64
EP  - 67
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - JOUR
A1  - Heinrichs, Horst
T1  - STEP bietet mehr
Y1  - 1992
N1  - Konferenz-Einzelbericht : FEM '92 Congress, Int. FEM-Congress, Baden-Baden, DE, 16.-17. Nov, 1992
SP  - 327
EP  - 344
PB  - IKOSS
CY  - Stuttgart
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kunkel, Maximilian Hugo
A1  - Gebhardt, Andreas
A1  - Mpofu, Khumbaulani
A1  - Kallweit, Stephan
T1  - Statistical assessment of mechanical properties of selective laser melted specimens of stainless steel
JF  - The International Journal of Advanced Manufacturing Technology
N2  - The rail business is challenged by long product life cycles and a broad spectrum of assembly groups and single parts. When spare part obsolescence occurs, quick solutions are needed. A reproduction of obsolete parts is often connected to long waiting times and minimum lot quantities that need to be purchased and stored. Spare part storage is therefore challenged by growing stocks, bound capital and issues of part ageing. A possible solution could be a virtual storage of spare parts which will be 3D printed through additive manufacturing technologies in case of sudden demand. As mechanical properties of additive manufactured parts are neither guaranteed by machine manufacturers nor by service providers, the utilization of this relatively young technology is impeded and research is required to address these issues. This paper presents an examination of mechanical properties of specimens manufactured from stainless steel through the selective laser melting (SLM) process. The specimens were produced in multiple batches. This paper interrogates the question if the test results follow a normal distribution pattern and if mechanical property predictions can be made. The results will be put opposite existing threshold values provided as the industrial standard. Furthermore, probability predictions will be made in order to examine the potential of the SLM process to maintain state-of-the-art mechanical property requirements.
Y1  - 2018
U6  - http://dx.doi.org/10.1007/s00170-018-2040-8
SN  - 0268-3768
VL  - 98
IS  - 5-8
SP  - 1409
EP  - 1431
PB  - Springer
CY  - London
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Drews, P.
T1  - Stand der Sensorentwicklung fuer Schutzgasschweissroboter
JF  - Schweissen und Schneiden. 36 (1984), H. 4
Y1  - 1984
SN  - 0036-7184
SP  - 166
EP  - 172
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Anik, Salahaddin
T1  - Stand der Schweißtechnik in der Türkei
JF  - Schweißen und Schneiden : Fachzeitschrift für Schweißen und verwandte Verfahren
Y1  - 1991
SN  - 0036-7184
VL  - 43
IS  - 3
SP  - 142
EP  - 145
ER  - 
TY  - JOUR
A1  - Gartzen, Johannes
T1  - Spätes Aufwachen aus dem Dornröschenschlaf: Ohne Energie läuft nichts
JF  - Aachener Nachrichten (2011)
Y1  - 2011
SP  - 22
PB  - Zeitungsverl. Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Kurzawa, R.
A1  - Schmitt, W.
A1  - Güntherodt, G.
T1  - Spin-resolved photoemission study of in situ grown epitaxial Fe layers on W(110). Kurzawa, R.; Kämper, K.-P.; Schmitt, W.; Güntherodt, G.
JF  - Solid State Communications. 60 (1986), H. 10
Y1  - 1986
SN  - 0038-1098
SP  - 777
EP  - 780
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Abraham, D. L.
A1  - Hopster, H.
T1  - Spin-polarized electron-energy-loss spectroscopy on epitaxial fcc Co layers on Cu(001)
JF  - Physical Review B. 45 (1992), H. 24
Y1  - 1992
SN  - 1095-3795
SP  - 14335
EP  - 14346
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Pappas, D. P.
A1  - Miller, B. P.
A1  - Hopster, H.
T1  - Spin-dependent electron attenuation by transmission through thin ferromagnetic films . Pappas, D. P.; Kämper,K.-P.; Miller, B. P.; Hopster, H.; Fowler, D. E.; Brundle, C. R.; Luntz, A. C.; Shen, Z.-X.
JF  - Physical Review Letters. 66 (1991), H. 4
Y1  - 1991
SN  - 1079-7114
SP  - 504
EP  - 507
ER  - 
TY  - JOUR
A1  - Kallweit, Stephan
A1  - Dues, M. W.
A1  - Siekmann, H. E.
T1  - Spectral Analysis of Pressure Fluctuations and Velocity Fields as Investigated on Propeller Pumps / Dues, M. W. ; Kallweit, S. D. ; Siekmann, H. E.
JF  - Preprints : Fifth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery (ISROMAC-5) : May 8 - 11, 1994, Maui Marriott Hotel, Kaanapali, Maui, Hawaii, U.S.A / sponsored by Pacific Center of Thermal-Fluids Engineering. [W.-J. Yang, chairman] / Vol. B.
Y1  - 1994
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery 5, 1994, Kaanapali, Hawaii
SP  - 98
EP  - 112
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Softwaretrends in der Automatisierungstechnik
JF  - Etz : Elektrotechnik & Automation ; Organ des VDE Verband der Elektrotechnik Elektronik Informationstechnik e.V. und der Energietechnischen Gesellschaft im VDE (ETG) und der VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik (GMA)
Y1  - 2005
SN  - 0948-7387
N1  - Printausgabe in der Bibliothek vorhanden: 63 ZS 035; 23 Z 133
VL  - 126
IS  - S2
SP  - 74
EP  - 79
ER  - 
TY  - JOUR
A1  - Barth, Heiko
A1  - Wollert, Jörg
T1  - SMARTes Konzept - von Produkt zur Fabrik
JF  - Facility-Management : Integration, Planung, Gebäudemanagement
Y1  - 1998
SN  - 0948-0048
VL  - Bd. 4
IS  - H. August
SP  - 30
EP  - 35
ER  - 
TY  - JOUR
A1  - Starke, Günther
A1  - Zack, Y.
A1  - Friedrich, A.-P.
A1  - Drichel, E.
T1  - Simulationswerkzeug bei der Herstellung von mikroelektronischen Komponenten. Schnelles Beurteilen von Alternativen in der Produktionsplanung und im Fertigungsdesign
JF  - FB/IE - Zeitschrift für Unternehmensentwicklung und Industrial Engineering. 52 (2003), H. 5
Y1  - 2003
SN  - 1431-2271
SP  - 204
EP  - 212
ER  - 
TY  - JOUR
A1  - Knepper, Ludger
T1  - Simulation: Vom reinen Planungswerkzeug zum Betriebsführungs-Instrument
JF  - Foerdern und Heben. 46 (1996), H. 3
Y1  - 1996
SN  - 0341-2636
SP  - 158
EP  - 160
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Döpper, J.
A1  - Ehrfeld, W.
A1  - Hagemann, B.
T1  - Simulation supported design of LIGA Microsystems. Kämper, K.-P.; Döpper, J.; Ehrfeld, W.; Hagemann, B.; Hill, S.D.J.; Lehr, H.
JF  - Simulation and design of microsystems and microstructures : [... contains the papers presented at the First International Conference on the Simulation and Design of Microsystems and Microstructures, MicroSIM '95, which was held in Southampton, UK, in September 1995] / [organised by: Wessex Institute of Technology, UK]. Ed.: R. A. Adey
Y1  - 1995
SN  - 1-85312-390-0
SP  - 3
EP  - 10
PB  - Computational Mechanics Publ.
CY  - Southampton [u.a.]
ER  -