TY - CHAP A1 - Langohr, Philipp A1 - Bung, Daniel Bernhard A1 - Crookston, Brian M. ED - Ortega-Sánchez, Miguel T1 - Hybrid investigation of labyrinth weirs: Discharge capacity and energy dissipation T2 - Proceedings of the 39th IAHR World Congress N2 - The replacement of existing spillway crests or gates with labyrinth weirs is a proven techno-economical means to increase the discharge capacity when rehabilitating existing structures. However, additional information is needed regarding energy dissipation of such weirs, since due to the folded weir crest, a three-dimensional flow field is generated, yielding more complex overflow and energy dissipation processes. In this study, CFD simulations of labyrinth weirs were conducted 1) to analyze the discharge coefficients for different discharges to compare the Cd values to literature data and 2) to analyze and improve energy dissipation downstream of the structure. All tests were performed for a structure at laboratory scale with a height of approx. P = 30.5 cm, a ratio of the total crest length to the total width of 4.7, a sidewall angle of 10° and a quarter-round weir crest shape. Tested headwater ratios were 0.089 ≤ HT/P ≤ 0.817. For numerical simulations, FLOW-3D Hydro was employed, solving the RANS equations with use of finite-volume method and RNG k-ε turbulence closure. In terms of discharge capacity, results were compared to data from physical model tests performed at the Utah Water Research Laboratory (Utah State University), emphasizing higher discharge coefficients from CFD than from the physical model. For upstream heads, some discrepancy in the range of ± 1 cm between literature, CFD and physical model tests was identified with a discussion regarding differences included in the manuscript. For downstream energy dissipation, variable tailwater depths were considered to analyze the formation and sweep-out of a hydraulic jump. It was found that even for high discharges, relatively low downstream Froude numbers were obtained due to high energy dissipation involved by the three-dimensional flow between the sidewalls. The effects of some additional energy dissipation devices, e.g. baffle blocks or end sills, were also analyzed. End sills were found to be non-effective. However, baffle blocks with different locations may improve energy dissipation downstream of labyrinth weirs. Y1 - 2022 SN - 978-90-832612-1-8 U6 - https://doi.org/10.3850/IAHR-39WC252171192022738 SN - 2521-7119 (print) SN - 2521-716X (online) N1 - 39th IAHR World Congress, 19. - 24. Juni 2022, Granada SP - 2313 EP - 2318 PB - International Association for Hydro-Environment Engineering and Research (IAHR) CY - Madrid ER - TY - CHAP A1 - Crookston, Brian M. A1 - Bung, Daniel Bernhard ED - Ortega-Sánchez, Miguel T1 - Application of RGB-D cameras in hydraulic laboratory studies T2 - Proceedings of the 39th IAHR World Congress N2 - Non-intrusive measuring techniques have attained a lot of interest in relation to both hydraulic modeling and prototype applications. Complimenting acoustic techniques, significant progress has been made for the development of new optical methods. Computer vision techniques can help to extract new information, e. g. high-resolution velocity and depth data, from videos captured with relatively inexpensive, consumer-grade cameras. Depth cameras are sensors providing information on the distance between the camera and observed features. Currently, sensors with different working principles are available. Stereoscopic systems reference physical image features (passive system) from two perspectives; in order to enhance the number of features and improve the results, a sensor may also estimate the disparity from a detected light to its original projection (active stereo system). In the current study, the RGB-D camera Intel RealSense D435, working on such stereo vision principle, is used in different, typical hydraulic modeling applications. All tests have been conducted at the Utah Water Research Laboratory. This paper will demonstrate the performance and limitations of the RGB-D sensor, installed as a single camera and as camera arrays, applied to 1) detect the free surface for highly turbulent, aerated hydraulic jumps, for free-falling jets and for an energy dissipation basin downstream of a labyrinth weir and 2) to monitor local scours upstream and downstream of a Piano Key Weir. It is intended to share the authors’ experiences with respect to camera settings, calibration, lightning conditions and other requirements in order to promote this useful, easily accessible device. Results will be compared to data from classical instrumentation and the literature. It will be shown that even in difficult application, e. g. the detection of a highly turbulent, fluctuating free-surface, the RGB-D sensor may yield similar accuracy as classical, intrusive probes. Y1 - 2022 SN - 978-90-832612-1-8 U6 - https://doi.org/10.3850/IAHR-39WC252171192022964 SN - 2521-7119 (print) SN - 2521-716X (online) N1 - 39th IAHR World Congress, 19. - 24. Juni 2022, Granada SP - 5127 EP - 5133 PB - International Association for Hydro-Environment Engineering and Research (IAHR) CY - Madrid ER - TY - BOOK A1 - Kurz, Melanie A1 - Schwer, Thilo T1 - Raster, Regeln, Ratio : Systematiken und Normungen im Design des 20. Jahrhunderts / herausgegeben von Melanie Kurz und Thilo Schwer T3 - Schriften / Gesellschaft für Designgeschichte Y1 - 2022 SN - 978-3-89986-380-2 N1 - Band 5 PB - avedition CY - Stuttgart ER - TY - JOUR A1 - Fabo, Sabine ED - Wirth, Jacob T1 - Das Parasitäre in der Pandemie JF - Parasite Art Y1 - 2022 IS - Issue 2 SP - 8 EP - 11 PB - Parasite Art ER - TY - CHAP A1 - Kurz, Melanie T1 - Vom Werkbundstreit bis zur Papierformatnormung - welche Rolle der Chemie-Nobelpreisträger Friedrich Wilhelm Ostwald bei Typisierungsbestrebungen im Design spielt T2 - Raster, Regeln, Ratio : Systematiken und Normungen des 20. Jahrhunderts Y1 - 2022 SN - 978-3-89986-380-2 VL - 2022 SP - 6 EP - 17 PB - avedition CY - Stuttgart ER - TY - CHAP A1 - Fabo, Sabine T1 - Pandemische Momente T2 - Interaktion – Emotion – Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana Müller, Niklas von Reischach (Hrsg.) Y1 - 2022 SN - 978-3-593-51520-5 (Print) SN - 978-3-593-44960-9 (E-Book) SP - 137 EP - 140 PB - Campus CY - Frankfurt ; New York ER - TY - BOOK A1 - Kurz, Melanie A1 - Schwer, Thilo T1 - Geschichte des Designs N2 - Dieser Band bietet einen kompakten Überblick über die wichtigsten Stationen des Produktdesigns vom Beginn der Industrialisierung bis heute. Im Zentrum stehen ikonische Alltagsgegenstände vom Thonet-Stuhl bis zum iPhone. Anschaulich und kenntnisreich nehmen Melanie Kurz und Thilo Schwer dabei auch die gesellschaftspolitische Situation, in der die Objekte entstanden sind, in den Blick. Y1 - 2022 SN - 978-3-406-78813-0 PB - Beck CY - München ET - 1. Auflage ER - TY - CHAP A1 - Fabo, Sabine T1 - Plüschviren – Zur Konstruktion von Nähe in Zeiten der Pandemie T2 - Interaktion – Emotion – Desinfektion ; Kunst und Museum in Zeiten von Corona / Birgit Richard, Jana Müller, Niklas von Reischach (Hrsg.) Y1 - 2022 SN - 978-3-593-51520-5 (Print) SN - 978-3-593-44960-9 (E-Book) SP - 45 EP - 69 PB - Campus CY - Frankfurt ; New York ER - TY - THES A1 - Biewendt, Marcel T1 - Socio-Economic challenges in sustainability and resource management N2 - This dissertation uses in first stage a macroeconomic investigation to examine the dependence, influence and corruption of socio-economic development through effects of sustainability and resource management. The conducted research found that the state's dependence on its citizens decreases when the state's sources of revenue are largely detached and independent of the citizens' financial resources. In this case, financial resources are taxes and duties provided by the citizens. One possible consequence is the restriction of state investment in its citizens. Both the qualitative literature review and the quantitative data analysis revealed a negative correlation between socio-economic development and the resource economy's share of GDP for the period under study. The microeconomic investigation was primarily conducted through an intensive literature review. It was shown that the rebound effect as such is already very well researched. However, it also became clear that avoidance strategies for the rebound effect and links to sustainability initiatives are scarce or non-existent. The need for a redesign of the impact analysis with regard to technological innovations and their influence on resource consumption and resource management has become clear on the basis of the present study. Further, emerging and developing countries in particular, which will be confronted in the foreseeable future not only with the fundamental problems of resource abundance in the overall economic context, but also with the issues of their sustainable use, should be confronted with these problems as early as possible in order to find solutions in a timely manner. KW - Efficiency side-effects KW - Resource-optimization KW - Rebound effect KW - Socio-economics Y1 - 2022 PB - Hungarian University of Agriculture and Life Sciences ER - TY - JOUR A1 - Uysal, Karya A1 - Creutz, Till A1 - Firat, Ipek Seda A1 - Artmann, Gerhard A1 - Teusch, Nicole A1 - Temiz Artmann, Aysegül T1 - Bio-functionalized ultra-thin, large-area and waterproof silicone membranes for biomechanical cellular loading and compliance experiments JF - Polymers N2 - Biocompatibility, flexibility and durability make polydimethylsiloxane (PDMS) membranes top candidates in biomedical applications. CellDrum technology uses large area, <10 µm thin membranes as mechanical stress sensors of thin cell layers. For this to be successful, the properties (thickness, temperature, dust, wrinkles, etc.) must be precisely controlled. The following parameters of membrane fabrication by means of the Floating-on-Water (FoW) method were investigated: (1) PDMS volume, (2) ambient temperature, (3) membrane deflection and (4) membrane mechanical compliance. Significant differences were found between all PDMS volumes and thicknesses tested (p < 0.01). They also differed from the calculated values. At room temperatures between 22 and 26 °C, significant differences in average thickness values were found, as well as a continuous decrease in thicknesses within a 4 °C temperature elevation. No correlation was found between the membrane thickness groups (between 3–4 µm) in terms of deflection and compliance. We successfully present a fabrication method for thin bio-functionalized membranes in conjunction with a four-step quality management system. The results highlight the importance of tight regulation of production parameters through quality control. The use of membranes described here could also become the basis for material testing on thin, viscous layers such as polymers, dyes and adhesives, which goes far beyond biological applications. Y1 - 2022 SN - 2073-4360 VL - 14 IS - 11 SP - 2213 PB - MDPI CY - Basel ER - TY - JOUR A1 - Uysal, Karya A1 - Firat, Ipek Serat A1 - Creutz, Till A1 - Aydin, Inci Cansu A1 - Artmann, Gerhard A1 - Teusch, Nicole A1 - Temiz Artmann, Aysegül T1 - A novel in vitro wound healing assay using free-standing, ultra-thin PDMS membranes JF - membranes N2 - Advances in polymer science have significantly increased polymer applications in life sciences. We report the use of free-standing, ultra-thin polydimethylsiloxane (PDMS) membranes, called CellDrum, as cell culture substrates for an in vitro wound model. Dermal fibroblast monolayers from 28- and 88-year-old donors were cultured on CellDrums. By using stainless steel balls, circular cell-free areas were created in the cell layer (wounding). Sinusoidal strain of 1 Hz, 5% strain, was applied to membranes for 30 min in 4 sessions. The gap circumference and closure rate of un-stretched samples (controls) and stretched samples were monitored over 4 days to investigate the effects of donor age and mechanical strain on wound closure. A significant decrease in gap circumference and an increase in gap closure rate were observed in trained samples from younger donors and control samples from older donors. In contrast, a significant decrease in gap closure rate and an increase in wound circumference were observed in the trained samples from older donors. Through these results, we propose the model of a cell monolayer on stretchable CellDrums as a practical tool for wound healing research. The combination of biomechanical cell loading in conjunction with analyses such as gene/protein expression seems promising beyond the scope published here. Y1 - 2022 U6 - https://doi.org/10.3390/membranes13010022 N1 - This article belongs to the Special Issue "Latest Scientific Discoveries in Polymer Membranes" VL - 2023 IS - 13(1) PB - MDPI CY - Basel ER - TY - CHAP A1 - Weiss, Christian A1 - Heslenfeld, Jonas A1 - Saewe, Jasmin Kathrin A1 - Bremen, Sebastian A1 - Häfner, Constantin Leon T1 - Investigation on the influence of powder humidity in Laser Powder Bed Fusion (LPBF) T2 - Procedia CIRP 12th CIRP Conference on Photonic Technologies [LANE 2022] N2 - In the Laser Powder Bed Fusion (LPBF) process, parts are built out of metal powder material by exposure of a laser beam. During handling operations of the powder material, several influencing factors can affect the properties of the powder material and therefore directly influence the processability during manufacturing. Contamination by moisture due to handling operations is one of the most critical aspects of powder quality. In order to investigate the influences of powder humidity on LPBF processing, four materials (AlSi10Mg, Ti6Al4V, 316L and IN718) are chosen for this study. The powder material is artificially humidified, subsequently characterized, manufactured into cubic samples in a miniaturized process chamber and analyzed for their relative density. The results indicate that the processability and reproducibility of parts made of AlSi10Mg and Ti6Al4V are susceptible to humidity, while IN718 and 316L are barely influenced. KW - LPBF KW - Additive Manufacturing KW - Powder Material KW - Humidity Y1 - 2022 U6 - https://doi.org/10.1016/j.procir.2022.08.102 SN - 2212-8271 N1 - 12th CIRP Conference on Photonic Technologies [LANE 2022], 04. September 2022 bis 08. September 2022, Fürth VL - 111 SP - 115 EP - 120 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Angermann, Susanne A1 - Günthner, Roman A1 - Hanssen, Henner A1 - Lorenz, Georg A1 - Braunisch, Matthias C. A1 - Steubl, Dominik A1 - Matschkal, Julia A1 - Kemmner, Stephan A1 - Hausinger, Renate A1 - Block, Zenonas A1 - Haller, Bernhard A1 - Heemann, Uwe A1 - Kotliar, Konstantin A1 - Grimmer, Timo A1 - Schmaderer, Christoph T1 - Cognitive impairment and microvascular function in end-stage renal disease JF - International Journal of Methods in Psychiatric Research (MPR) N2 - Objective Hemodialysis patients show an approximately threefold higher prevalence of cognitive impairment compared to the age-matched general population. Impaired microcirculatory function is one of the assumed causes. Dynamic retinal vessel analysis is a quantitative method for measuring neurovascular coupling and microvascular endothelial function. We hypothesize that cognitive impairment is associated with altered microcirculation of retinal vessels. Methods 152 chronic hemodialysis patients underwent cognitive testing using the Montreal Cognitive Assessment. Retinal microcirculation was assessed by Dynamic Retinal Vessel Analysis, which carries out an examination recording retinal vessels' reaction to a flicker light stimulus under standardized conditions. Results In unadjusted as well as in adjusted linear regression analyses a significant association between the visuospatial executive function domain score of the Montreal Cognitive Assessment and the maximum arteriolar dilation as response of retinal arterioles to the flicker light stimulation was obtained. Conclusion This is the first study determining retinal microvascular function as surrogate for cerebral microvascular function and cognition in hemodialysis patients. The relationship between impairment in executive function and reduced arteriolar reaction to flicker light stimulation supports the involvement of cerebral small vessel disease as contributing factor for the development of cognitive impairment in this patient population and might be a target for noninvasive disease monitoring and therapeutic intervention. KW - cerebral small vessel disease KW - cognitive impairment KW - dialysis KW - retinal vessels Y1 - 2022 U6 - https://doi.org/10.1002/mpr.1909 SN - 1049-8931 (Print) SN - 1557-0657 (Online) VL - 31 IS - 2 SP - 1 EP - 10 PB - Wiley ER - TY - JOUR A1 - Kotliar, Konstantin A1 - Ortner, Marion A1 - Conradi, Anna A1 - Hacker, Patricia A1 - Hauser, Christine A1 - Günthner, Roman A1 - Moser, Michaela A1 - Muggenthaler, Claudia A1 - Diehl-Schmid, Janine A1 - Priller, Josef A1 - Schmaderer, Christoph A1 - Grimmer, Timo T1 - Altered retinal cerebral vessel oscillation frequencies in Alzheimer's disease compatible with impaired amyloid clearance JF - Neurobiology of Aging N2 - Retinal vessels are similar to cerebral vessels in their structure and function. Moderately low oscillation frequencies of around 0.1 Hz have been reported as the driving force for paravascular drainage in gray matter in mice and are known as the frequencies of lymphatic vessels in humans. We aimed to elucidate whether retinal vessel oscillations are altered in Alzheimer's disease (AD) at the stage of dementia or mild cognitive impairment (MCI). Seventeen patients with mild-to-moderate dementia due to AD (ADD); 23 patients with MCI due to AD, and 18 cognitively healthy controls (HC) were examined using Dynamic Retinal Vessel Analyzer. Oscillatory temporal changes of retinal vessel diameters were evaluated using mathematical signal analysis. Especially at moderately low frequencies around 0.1 Hz, arterial oscillations in ADD and MCI significantly prevailed over HC oscillations and correlated with disease severity. The pronounced retinal arterial vasomotion at moderately low frequencies in the ADD and MCI groups would be compatible with the view of a compensatory upregulation of paravascular drainage in AD and strengthen the amyloid clearance hypothesis. KW - Alzheimer's disease KW - Retinal vessel analysis KW - Vasomotions KW - Pulsations KW - Mild cognitive impairment Y1 - 2022 U6 - https://doi.org/10.1016/j.neurobiolaging.2022.08.012 SN - 0197-4580 VL - 120 SP - 117 EP - 127 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Moorkamp, Wilfried A1 - Peterson, Leif Arne A1 - Uibel, Thomas ED - Fouad, Nabil A. T1 - Nachhaltige Holzbrücken für Geh- und Radwege T2 - Bauphysik Kalender 2022: Holzbau, 22. Jahrgang N2 - Am Lehr- und Forschungsgebiet Holzbau der Fachhochschule Aachen wurden im Rahmen des Forschungsvorhabens „Nachhaltige Standardbrücken in Holzbauweise“ Standardtypen für Geh- und Radwegbrücken entwickelt. Die Brücken sind durch konsequente Umsetzungen von Maßnahmen des konstruktiven Holzschutzes für eine Nutzung von mehr als 80~Jahren konzipiert. Innovative Lösungen für Bauteile und Anschlüsse sowie Materialalternativen im Bereich des Belages und der Geländer ermöglichen eine wartungsarme Konstruktion und tragen somit zur Wirtschaftlichkeit und Nachhaltigkeit bei. Um den Einsatz der entwickelten Standardbrückentypen in der Praxis zu erleichtern, wurden Leistungsverzeichnisse, Musterstatiken, Musterzeichnungen und umfangreiche Detailkataloge als Unterstützung für Planer und Bauherren erstellt. Damit die Randbedingungen für eine lange Lebensdauer während der Nutzung der Brücke erhalten bleiben, wurden Leitfäden für die Pflege und Wartung sowie für die Brückenprüfung erarbeitet. Der Beitrag gibt Einblicke in das Forschungsvorhaben und seine Resultate. Y1 - 2022 SN - 9783433033609 (Print) SN - 9783433611081 (Online) U6 - https://doi.org/10.1002/9783433611081.ch17 SP - 574 EP - 592 PB - Ernst & Sohn CY - Berlin ER - TY - JOUR A1 - Werfel, Stanislas A1 - Günthner, Roman A1 - Hapfelmeier, Alexander A1 - Hanssen, Henner A1 - Kotliar, Konstantin A1 - Heemann, Uwe A1 - Schmaderer, Christoph ED - Guzik, Tomasz J. T1 - Identification of cardiovascular high-risk groups from dynamic retinal vessel signals using untargeted machine learning JF - Cardiovascular Research N2 - Dynamic retinal vessel analysis (DVA) provides a non-invasive way to assess microvascular function in patients and potentially to improve predictions of individual cardiovascular (CV) risk. The aim of our study was to use untargeted machine learning on DVA in order to improve CV mortality prediction and identify corresponding response alterations. KW - Machine learning KW - Retinal vessels KW - Microcirculation KW - Haemodialysis KW - Myocardial infarction and cardiac death Y1 - 2022 U6 - https://doi.org/10.1093/cvr/cvab040 SN - 0008-6363 VL - 118 IS - 2 SP - 612 EP - 621 PB - Oxford University Press CY - Oxford ER - TY - CHAP A1 - Veettil, Yadu Krishna Morassery A1 - Rakshit, Shantam A1 - Schopen, Oliver A1 - Kemper, Hans A1 - Esch, Thomas A1 - Shabani, Bahman ED - Bin Abdollah, Mohd Fadzli ED - Amiruddin, Hilmi ED - Singh, Amrik Singh Phuman ED - Munir, Fudhail Abdul ED - Ibrahim, Asriana T1 - Automated Control System Strategies to Ensure Safety of PEM Fuel Cells Using Kalman Filters T2 - Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia N2 - Having well-defined control strategies for fuel cells, that can efficiently detect errors and take corrective action is critically important for safety in all applications, and especially so in aviation. The algorithms not only ensure operator safety by monitoring the fuel cell and connected components, but also contribute to extending the health of the fuel cell, its durability and safe operation over its lifetime. While sensors are used to provide peripheral data surrounding the fuel cell, the internal states of the fuel cell cannot be directly measured. To overcome this restriction, Kalman Filter has been implemented as an internal state observer. Other safety conditions are evaluated using real-time data from every connected sensor and corrective actions automatically take place to ensure safety. The algorithms discussed in this paper have been validated thorough Model-in-the-Loop (MiL) tests as well as practical validation at a dedicated test bench. KW - control system KW - PEM fuel cells KW - Kalman filter Y1 - 2022 SN - 978-981-19-3178-9 SN - 978-981-19-3179-6 (E-Book) U6 - https://doi.org/10.1007/978-981-19-3179-6_55 SN - 2195-4356 N1 - 7th International Conference and Exhibition on Sustainable Energy and Advanced Material (ICE-SEAM 2021), Universiti Teknikal Malaysia Melaka (UTeM), Malaysia, in association with the Universitas Sebelas Maret (UNS), Indonesia, 23 November 2021 SP - 296 EP - 299 PB - Springer Nature CY - Singapore ER - TY - CHAP A1 - Sattler, Johannes Christoph A1 - Atti, Vikrama A1 - Alexopoulos, Spiros A1 - Teixeira Boura, Cristiano José A1 - Herrmann, Ulf A1 - Dutta, Siddharth A1 - Kioutsioukis, Ioannis T1 - DNI forecast tool for the smart operation of a parabolic trough collector system with concrete thermal energy storage: Theory, results and outlook T2 - SolarPACES 2022 conference proceedings N2 - This work presents a basic forecast tool for predicting direct normal irradiance (DNI) in hourly resolution, which the Solar-Institut Jülich (SIJ) is developing within a research project. The DNI forecast data shall be used for a parabolic trough collector (PTC) system with a concrete thermal energy storage (C-TES) located at the company KEAN Soft Drinks Ltd in Limassol, Cyprus. On a daily basis, 24-hour DNI prediction data in hourly resolution shall be automatically produced using free or very low-cost weather forecast data as input. The purpose of the DNI forecast tool is to automatically transfer the DNI forecast data on a daily basis to a main control unit (MCU). The MCU automatically makes a smart decision on the operation mode of the PTC system such as steam production mode and/or C-TES charging mode. The DNI forecast tool was evaluated using historical data of measured DNI from an on-site weather station, which was compared to the DNI forecast data. The DNI forecast tool was tested using data from 56 days between January and March 2022, which included days with a strong variation in DNI due to cloud passages. For the evaluation of the DNI forecast reliability, three categories were created and the forecast data was sorted accordingly. The result was that the DNI forecast tool has a reliability of 71.4 % based on the tested days. The result fulfils SIJ’s aim to achieve a reliability of around 70 %, but SIJ aims to still improve the DNI forecast quality. KW - Direct normal irradiance forecast KW - DNI forecast KW - Parabolic trough collector KW - PTC KW - Thermal Energy Storage Y1 - 2024 U6 - https://doi.org/10.52825/solarpaces.v1i.731 SN - 2751-9899 (online) N1 - SolarPACES 2022, 28th International Conference on Concentrating Solar Power and Chemical Energy Systems, 27-30 September, Albuquerque, NM, USA IS - 1 PB - TIB Open Publishing CY - Hannover ER - TY - CHAP A1 - Hoffschmidt, Bernhard A1 - Alexopoulos, Spiros A1 - Rau, Christoph A1 - Sattler, Johannes, Christoph A1 - Anthrakidis, Anette A1 - Teixeira Boura, Cristiano José A1 - O’Connor, B. A1 - Chico Caminos, R.A. A1 - Rendón, C. A1 - Hilger, P. T1 - Concentrating solar power T2 - Comprehensive Renewable Energy (Second Edition) / Volume 3: Solar Thermal Systems: Components and Applications N2 - The focus of this chapter is the production of power and the use of the heat produced from concentrated solar thermal power (CSP) systems. The chapter starts with the general theoretical principles of concentrating systems including the description of the concentration ratio, the energy and mass balance. The power conversion systems is the main part where solar-only operation and the increase in operational hours. Solar-only operation include the use of steam turbines, gas turbines, organic Rankine cycles and solar dishes. The operational hours can be increased with hybridization and with storage. Another important topic is the cogeneration where solar cooling, desalination and of heat usage is described. Many examples of commercial CSP power plants as well as research facilities from the past as well as current installed and in operation are described in detail. The chapter closes with economic and environmental aspects and with the future potential of the development of CSP around the world. KW - Central receiver power plant KW - Concentrated systems KW - Gas turbine KW - Hybridization KW - Power conversion systems Y1 - 2022 SN - 978-0-12-819734-9 SP - 670 EP - 724 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Schopen, Oliver A1 - Shabani, Bahman A1 - Esch, Thomas A1 - Kemper, Hans A1 - Shah, Neel ED - Rahim, S.A. ED - As'arry, A. ED - Zuhri, M.Y.M. ED - Harmin, M.Y. ED - Rezali, K.A.M. ED - Hairuddin, A.A. T1 - Quantitative evaluation of health management designs for fuel cell systems in transport vehicles T2 - 2nd UNITED-SAIG International Conference Proceedings N2 - Focusing on transport vehicles, mainly with regard to aviation applications, this paper presents compilation and subsequent quantitative evaluation of methods aimed at building an optimum integrated health management solution for fuel cell systems. The methods are divided into two different main types and compiled in a related scheme. Furthermore, different methods are analysed and evaluated based on parameters specific to the aviation context of this study. Finally, the most suitable method for use in fuel cell health management systems is identified and its performance and suitability is quantified. KW - aviation application KW - health management systems KW - fuel cell systems Y1 - 2022 N1 - 2nd UNITED-SAIG International Conference, 23-24 May 2022, Putrajaya, Malaysia SP - 1 EP - 3 ER - TY - JOUR A1 - Abbas, Karim A1 - Balc, Nicolae A1 - Bremen, Sebastian A1 - Skupin, Marco T1 - Crystallization and aging behavior of polyetheretherketone PEEK within rapid tooling and rubber molding JF - Journal of Manufacturing and Materials Processing N2 - In times of short product life cycles, additive manufacturing and rapid tooling are important methods to make tool development and manufacturing more efficient. High-performance polymers are the key to mold production for prototypes and small series. However, the high temperatures during vulcanization injection molding cause thermal aging and can impair service life. The extent to which the thermal stress over the entire process chain stresses the material and whether it leads to irreversible material aging is evaluated. To this end, a mold made of PEEK is fabricated using fused filament fabrication and examined for its potential application. The mold is heated to 200 ◦C, filled with rubber, and cured. A differential scanning calorimetry analysis of each process step illustrates the crystallization behavior and first indicates the material resistance. It shows distinct cold crystallization regions at a build chamber temperature of 90 ◦C. At an ambient temperature above Tg, crystallization of 30% is achieved, and cold crystallization no longer occurs. Additional tensile tests show a decrease in tensile strength after ten days of thermal aging. The steady decrease in recrystallization temperature indicates degradation of the additives. However, the tensile tests reveal steady embrittlement of the material due to increasing crosslinking. KW - additive manufacturing KW - fused filament fabrication KW - crystallization KW - polyetheretherketone KW - rapid tooling Y1 - 2022 U6 - https://doi.org/10.3390/jmmp6050093 SN - 2504-4494 N1 - The article belongs to the Special Issue Advances in Injection Molding: Process, Materials and Applications VL - 6 IS - 5 SP - 1 EP - 12 PB - MDPI CY - Basel ER - TY - JOUR A1 - Niedermeier, Jana A1 - Penner, Crystal A1 - Usherovich, Samuel A1 - Bélanger-Champagne, Camille A1 - Paulßen, Elisabeth A1 - Hoehr, Cornelia T1 - Optical Fibers as Dosimeter Detectors for Mixed Proton/Neutron Fields - A Biological Dosimeter JF - electronics N2 - In recent years, proton therapy has gained importance as a cancer treatment modality due to its conformality with the tumor and the sparing of healthy tissue. However, in the interaction of the protons with the beam line elements and patient tissues, potentially harmful secondary neutrons are always generated. To ensure that this neutron dose is as low as possible, treatment plans could be created to also account for and minimize the neutron dose. To monitor such a treatment plan, a compact, easy to use, and inexpensive dosimeter must be developed that not only measures the physical dose, but which can also distinguish between proton and neutron contributions. To that end, plastic optical fibers with scintillation materials (Gd₂O₂S:Tb, Gd₂O₂S:Eu, and YVO₄:Eu) were irradiated with protons and neutrons. It was confirmed that sensors with different scintillation materials have different sensitivities to protons and neutrons. A combination of these three scintillators can be used to build a detector array to create a biological dosimeter. KW - biological dosimeter KW - Bragg peak KW - relative dosimetry KW - optical fibers KW - proton therapy KW - protons KW - neutrons Y1 - 2023 U6 - https://doi.org/10.3390/electronics12020324 SN - 2079-9292 N1 - This article belongs to the Special Issue "Applications of Optical Fiber Sensors" VL - 12 IS - 2 PB - MDPI CY - Basel ER - TY - JOUR A1 - Rübbelke, Dirk A1 - Vögele, Stefan A1 - Grajewski, Matthias A1 - Zobel, Luzy T1 - Cross border adjustment mechanism: Initial data for the assessment of hydrogen-based steel production JF - Data in Brief N2 - Ambitious climate targets affect the competitiveness of industries in the international market. To prevent such industries from moving to other countries in the wake of increased climate protection efforts, cost adjustments may become necessary. Their design requires knowledge of country-specific production costs. Here, we present country-specific cost figures for different production routes of steel, paying particular attention to transportation costs. The data can be used in floor price models aiming to assess the competitiveness of different steel production routes in different countries (Rübbelke, 2022). KW - Energy-intensive industry KW - Steel industry KW - Competitiveness KW - Floor prices KW - Cross border adjustment mechanism Y1 - 2023 U6 - https://doi.org/10.1016/j.dib.2023.108907 SN - 2352-3409 VL - 47 IS - Article 108907 SP - 1 EP - 5 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Haeger, Gerrit A1 - Grankin, Alina A1 - Wagner, Michaela T1 - Construction of an Aspergillus oryzae triple amylase deletion mutant as a chassis to evaluate industrially relevant amylases using multiplex CRISPR/Cas9 editing technology JF - Applied Research N2 - Aspergillus oryzae is an industrially relevant organism for the secretory production of heterologous enzymes, especially amylases. The activities of potential heterologous amylases, however, cannot be quantified directly from the supernatant due to the high background activity of native α-amylase. This activity is caused by the gene products of amyA, amyB, and amyC. In this study, an in vitro CRISPR/Cas9 system was established in A. oryzae to delete these genes simultaneously. First, pyrG of A. oryzae NSAR1 was mutated by exploiting NHEJ to generate a counter-selection marker. Next, all amylase genes were deleted simultaneously by co-transforming a repair template carrying pyrG of Aspergillus nidulans and flanking sequences of amylase gene loci. The rate of obtained triple knock-outs was 47%. We showed that triple knockouts do not retain any amylase activity in the supernatant. The established in vitro CRISPR/Cas9 system was used to achieve sequence-specific knock-in of target genes. The system was intended to incorporate a single copy of the gene of interest into the desired host for the development of screening methods. Therefore, an integration cassette for the heterologous Fpi amylase was designed to specifically target the amyB locus. The site-specific integration rate of the plasmid was 78%, with exceptional additional integrations. Integration frequency was assessed via qPCR and directly correlated with heterologous amylase activity. Hence, we could compare the efficiency between two different signal peptides. In summary, we present a strategy to exploit CRISPR/Cas9 for gene mutation, multiplex knock-out, and the targeted knock-in of an expression cassette in A. oryzae. Our system provides straightforward strain engineering and paves the way for development of fungal screening systems. KW - aspergillus KW - CRISPR/Cas9 KW - filamentous fungi KW - genome engineering Y1 - 2023 U6 - https://doi.org/10.1002/appl.202200106 SN - 2702-4288 IS - Early View SP - 1 EP - 15 PB - Wiley-VCH ER - TY - CHAP A1 - Engelmann, Ulrich M. A1 - Baumann, Martin ED - Herbig, Nicola ED - Poppelreuter, Stefan T1 - Moderationsexpertise für QMBs – die Methoden T2 - Qualitätsmanagement im Gesundheitswesen N2 - Damit Sie als Moderator effektiv und professionell moderieren können, sollten Sie die entsprechenden Methoden kennen. Mit den richtigen Methoden können Sie Diskussionen leiten, Konflikte lösen, die Teilnehmer motivieren und dafür sorgen, dass die Ziele der Veranstaltung erreicht werden. Außerdem helfen sie Ihnen, eine positive Atmosphäre zu schaffen und das Interesse der Teilnehmer zu halten. In diesem zweiten Beitrag der mehrteiligen Serie lernen Sie die grundsätzlichen Methoden kennen, um erfolgreiche Teamsitzungen, Arbeitsgruppentreffen, Kick-offs und Meetings durchzuführen. Y1 - 2023 SN - 978-3-8249-0714-4 SP - Kapitel 10815 PB - TÜV-Verlag CY - Köln ET - 60. Update ER - TY - THES A1 - Heising, Michelle T1 - Nachhaltige Gestaltung im urbanen öffentlichen Raum : erneuerbare Energien in Begegnungsräume integrieren N2 - RƎURB (Reurbanization & Renewable Energy) ist ein Konzept zur Integration von erneuerbaren Energien in einen urbanen Begegnungsraum. Es beinhaltet das Design eines skulpturalen Kleinwindkraftwerks und eines Solar-Pavillons mit einer Sitzlandschaft für einen energieautarken, öffentlichen Platz. Durch die Integration eines W-LAN Hotspots und Lademöglichkeiten in der Sitzlandschaft bringt RƎURB nicht nur grünen Strom in die Stadt, sondern gewährleistet der Bevölkerung auch Zugang zur Digitalisierung und einen kostenlosen Arbeitsraum. Windturbine: Herkömmliche Windräder können in der Stadt nicht genutzt werden. Die RƎURB-Windsäule ist darauf spezialisiert, die urbanen Winde aus allen Richtungen aufzunehmen und funktioniert schon bei einem leichten Windstoß. Durch das elegante Design lassen sich die Technologien als ästhetischen Blickfang in das moderne Stadtbild integrieren. KW - Erneuerbare Energien KW - Urbane Gestaltung KW - Solarenergie KW - Windkraft KW - Architektur Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Hatke, Lars T1 - X Plore: human hybrid submarine N2 - Das „X Plore“ ist ein human hybrid angetriebenes Tauchboot, welches sowohl für den touristischen als auch privaten Gebrauch konzipiert ist. Das immersive Design des „X Plore" sorgt für ein eindrucksvolles Taucherlebnis. Das Konzept soll die Menschen über die aktuelle Not der Meere und ihrer Lebewesen aufklären und ihnen gleichzeitig die Möglichkeit geben, der Unterwasserwelt näher zukommen. Zudem soll es diese erhalten und ihre Bewohner:innen schützen. Des Weiteren thematisiert die Arbeit zukunftsorientierte Antriebs- und Batterietechniken und setzt sich mit der sinnvollen Integrierung dieser auseinander. KW - Entdecken KW - Abenteuer KW - Erkunden KW - Unterwasserwelt KW - Tauchboot Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Herrmann, Luna T1 - Blind Shopping N2 - Das Einkaufen in Einkaufszentren oder Ladenstraßen ist für Menschen ohne Sehbehinderung eine selbstverständliche Tätigkeit. Für Menschen mit Sehbehinderung gibt es bis heute keine Möglichkeit, sich ohne Hilfe von Familienmitgliedern, Freund:innen oder Pflegepersonal in einem Einkaufszentrum zurechtzufinden. Genau dieses Problem löst "NAVON.". Er ist ein intelligenter und smarter Blindenstock, welcher durch Ultraschalldistanzsensoren frühzeitig Hindernisse erkennt und die Möglichkeit bietet, den Betroffenen durch das Einkaufszentrum zu lotsen. Die Logik des Systems liegt innerhalb des Handgriffs, welcher die wichtigsten Einstellungen bzgl. Sprache und haptischer Bedienelemente steuert. Ebenfalls gibt er dem Betroffenen auch ein haptisches Feedback, um Hindernisse frühzeitig umgehen zu können. "NAVON." ist ein wichtiger Ansatz für eine neue Kategorie von Produkten und Blindenstöcken. Darüber hinaus birgt das Konzept auch weitere Potenziale für öffentliche Gebäude (Ämter, Krankenhäuser, etc..). KW - Inklusion KW - Sehbehinderung KW - Einkaufen KW - Hindernisse KW - Blindenstock Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Lorse, Hannah T1 - Gemüsevolle Aussichten : eine bunte Sammlung essbarer Pflanzenteile N2 - Die Bachelorarbeit „Gemüsevolle Aussichten“ / „Eine bunte Sammlung essbarer Pflanzenteile“ umfasst eine illustrative Auseinandersetzung, bunte Sammlung essbarer Pflanzenteile (Gemüse). Mit ihr entsteht ein visueller Anreiz, sich mehr mit dem gesunden Nahrungsmittel auseinanderzusetzen. Viele Kinder sowie Erwachsene kennen viele Gemüsesorten überhaupt nicht, Gemüse wie z. B. Schwarzwurzeln, Pastinaken oder gar Fenchel ist oftmals wenig bekannt. Mit der Arbeit wird ein informeller, illustrativer Überblick über Gemüse geschaffen, um zum Beispiel auch über die Inhaltsstoffe zu informieren. Denn viele wissen gar nicht, was eigentlich in dem wertvollen Nahrungsmitteln steckt, wie gut ein regelmäßiger Konsum von Gemüse eigentlich für uns ist. Dabei hat der tägliche Konsum von verschiedenen Gemüsesorten nicht nur eine Auswirkung auf die körperliche sondern auch auf die mentale Gesundheit. Viele Gemüsesorten beinhalten bestimmte Vitamine oder weitere Inhaltsstoffe, die sich positiv auf unsere Psyche auswirken und dazu beitragen, zum Bespiel einen depressiven Zustand zu verbessern. Auch die Umwelt kann von einem häufigeren Konsum von Gemüse anstatt Fleisch profitieren. Denn bei der Produktion von Fleisch entsteht viel mehr Kohlenstoffdioxid als bei der Produktion von Gemüse. Auch der Anteil des virtuellen Wassers ist bei der Produktion von Fleisch viel höher. Das Projekt besteht aus einem fadengebundenen Hardcover-Buch und einer Poster-Serie. Zu Beginn der Arbeit wird eine allgemeine Einleitung in das Thema Gemüse gegeben. Im folgenden Hauptteil werden verschiedene Gemüsegruppen und einige der zugehörigen Sorten visuell und informativ erklärt. Bei der Poster-Serie wurden die sechs Hauptfarben, die jeweiligen Gemüseillustrationen separiert und im Stil der Arbeit nummeriert benannt. Mit dem Projekt soll die Unwissenheit über viele Gemüsesorten gesenkt und der Konsum von weniger Fleisch und mehr Gemüse angeregt werden. KW - Gemüse KW - Pflanzenteile KW - Lebensmittel KW - Nahrung KW - Gesundheit Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Martinez, Mariana T1 - The Taste of Memories : a recipe book of memories N2 - What does the word 'home' means and at what age do we give it meaning? Many of us grew up in one, in a home that our parents, grandparents, aunts, uncles and relatives shaped. Who, as we grew up, taught us about the world from their perspective as we interpreted and saw it for the first time and with it, its colors, its smells, its tastes, its sounds, its dances, and its languages. When we migrate, we take all that with us, like a piece of luggage that was stored in some corner inside a lung, or inside the memory in a heart’s artery. And then you arrive in this new world, which we were told was the Old World, with other colors, other flavors, other words, in which yours no longer make sense. And you try to connect with all your senses, but, above all, we try to belong, because we belonged all our lives to something, to someone, to some place where we learned to be. When we migrate, without saying, we go through the grieve that comes with the beautiful discomfort of leaving everything we once knew. We mourn, because we can’t go to lunch at our grandmas on Sundays, or have mom bring us soup when we are sick, or the Christmas meals and celebrations that we like so much, or that special dish that was made for us on our birthdays or on a family BBQ on a Sunday or a holiday. I wonder if emotions come inside us through the taste and respiratory track, if it is that we breathe life, and with that what we love finds its ways inside and finds its corner somewhere in the body. If what we have loved and what we have lived hides somewhere in our body, I doubtlessly think it came in through one of our senses, and in this attempt at my first illustrated book I’ll share which, I think, are the senses through which at first instance part of what we perceive as cultural identity enters. KW - Illustration KW - Heimat KW - Kindheit KW - Gehirn KW - Gerüche Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Merkel, Tobias T1 - Unterstützung für Familien : barrierearme Inanspruchnahme von Sozialleistungen für Familien und Kinder N2 - Familienbezogene Sozialleistungen sind wichtige Bestandteile eines Sozialstaats: Nicht nur helfen sie Kindern und Familien bei der Bewältigung ihres Alltags, vielmehr sichern sie ein ̈würdevolles Zusammenleben, gleichen in Teilen soziale Unterschiede aus und korrigieren ungleiche Startchancen. Chancengleichheit ist kein triviales Thema: Eine Gesellschaft, die auf sozialen Grundpfeilern aufbaut, muss ständig die Umsetzung dieses eigenen Anspruchs bewerten. Finanzielle Mittel, die deswegen angeboten werden, sind nur dann wirksam, wenn sie Betroffene erreichen. 
Die Nicht-Inanspruchnahme von Sozialleistungen ist ein komplexes Problem. Als Ursache wird gemeinhin die Attraktivität der Leistungen genannt. Vielfach sind aber die Kommunikation und die Informationsbeschaffung entscheidende Faktoren, warum Hilfe ungenutzt bleibt. In dem Projekt ist demgemäß zu erörtern, wie über zeitgemäße digitale Instrumente das Angebot und die Leistungen der Familienkasse zugänglich, barrierearm und intuitiv gestaltet werden können. KW - Sozialleistungen KW - Familienkasse KW - Optimierung KW - Unterstützung KW - Informationsdesign Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Outkina, Ioulia T1 - Kassandra : wetterbedingte Extremereignisse werden zunehmend die neue Realität bestimmen N2 - Wetterbedingte Extremereignisse nehmen mit dem Klimawandel in vielen Regionen der Welt an Intensität und Häufigkeit zu. Immer wieder unterstreichen tragische Krisenvorfälle die Notwendigkeit der Aufklärung im Nachgang. Doch ausgerechnet wenn sich Leute über eins der aktuellsten und schwerwiegendsten Themen unserer heutigen Zeit informieren wollen, wird es dafür keinen konsistenten Kanal in Deutschland geben. Kassandra bietet die Möglichkeit, sich verständlich mit den Ereignissen und Missständen sachlich im Krisenbereich auseinanderzusetzen. Transparenz und Seriosität sind Schwerpunkte im qualitativ hochwertigen Bereich, die dabei von Wichtigkeit sind. Mit den Prinzipien des investigativen Journalismus schafft Kassandra als Onlineformat einen Denkanstoß, wie im Bereich der Krisenkommunikation eine Verbesserung stattfinden kann. KW - UX KW - UI KW - Krise KW - klimakrise KW - klimawandel Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Palm, Kevin John T1 - Viva sin Aqua : Konzeption einer Kampagne zum virtuellen Wasserbedarf N2 - Den aktuellen Zustand unserer Welt positiv zu beeinflussen, ist ein übergeordnetes Ziel, welches nur kollektiv als Gesellschaft erreicht werden kann. Das Einsparen von Ressourcen ist ein leichter Weg für jede einzelne Person, um ihren Beitrag für dieses Ziel zu leisten. Doch wie bewegt man die Bevölkerung zum Sparen? Und was soll eingespart werden? Die Kampagne "Viva sin Agua” sensibilisiert für die Ressource Wasser und nutzt dabei den öffentlichen Raum. Aufgeklärt wird über das sogenannte virtuelle Wasser. Dieses fällt in teilweise extremen Mengen für die Produktion jeglicher Konsumwaren an. Das Ziel der Kampagne ist das Kennzeichnen dieses Wasserverbrauchs direkt am Produkt über eigene Labels. Dadurch soll ein Bewusstsein für den kritischen Kontext geschaffen und das allgemeine Konsumverhalten nachhaltig verändert werden. KW - Wasserknappheit KW - Kampagne KW - Virtuelles Wasser KW - Latentes Wasser KW - Nachhaltigkeit Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Bialonski, Stephan A1 - Grieger, Niklas T1 - Der KI-Chatbot ChatGPT: Eine Herausforderung für die Hochschulen JF - Die neue Hochschule N2 - Essays, Gedichte, Programmcode: ChatGPT generiert automatisch Texte auf bisher unerreicht hohem Niveau. Dieses und nachfolgende Systeme werden nicht nur die akademische Welt nachhaltig verändern. Y1 - 2023 U6 - https://doi.org/10.5281/zenodo.7533758 SN - 0340-448X VL - 2023 IS - 1 SP - 24 EP - 27 PB - HLB CY - Bonn ER - TY - THES A1 - Fleißner, Annette Michaela T1 - Niemals gut genug : Narzissmus bei Frauen in der Mutter-Tochter-Beziehung N2 - Narzissmus ist ein vielgenutzter Begriff. Häufig wird er im Kontext toxischer Beziehungen verwendet. Nur selten wird das Leben von Frauen thematisiert, deren Mutter narzisstisch ist. Die Graphic Novel „Niemals gut genug“ leistet einen Beitrag zu diesem wenig beachteten Thema. „Niemals gut genug“ schildert anhand von illustrierten Kurzgeschichten alltägliche Situationen von Töchtern narzisstischer Mütter. Die Kurzgeschichten berücksichtigen die Vielfalt narzisstischer Persönlichkeitsstörungen und werfen ein Schlaglicht auf die Vergangenheit narzisstischer Mütter. Dadurch rückt auch die transgenerationale Weitergabe von Narzissmus in den Fokus. „Niemals gut genug“ stellt einen einfühlsamen Zugang zu diesem sensiblen Thema dar und hilft dadurch Betroffenen beim Verstehen und Genesen. KW - Narzissmus KW - Mutter KW - Familie KW - Psychologie KW - Illustration Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Heindrichs, Maik T1 - Intrinsic Motion in Type : eine Bewegtbild Plakatreihe für das Düsseldorfer Schauspielhaus N2 - Gestaltung und Programmierung dynamischer Motion-Design Plakate zwecks Kommunikation der Theaterstücke des Düsseldorfer Schauspielhauses. Der Fokus liegt dabei auf der Typografie und ihrer intrinsischen Bewegung. Der technische Fortschritt bietet viele neue Möglichkeiten im Umgang mit Schrift. Diese Arbeit dient dazu, mithilfe von aktuellen Techniken einen neuen Ansatz im Bereich Gestaltung mit Schrift, sowie Variable Fonts, in Kombination mit Motion-Design aufzuzeigen. Dies wird anhand von Eigenschaften der Schrift und der inhaltlichen Ebene, ohne die Buchstaben dabei zu dekonstruieren, umgesetzt. Die Bewegungen werden dann in das Format Plakat übertragen und dargestellt. KW - Bewegtbild KW - Plakat KW - Animation KW - Variable Schriften KW - Schriftvarianten Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Drumm, Christian A1 - Scheuermann, Bernd A1 - Weidner, Stefan T1 - Einstieg in SAP S/4HANA® : Geschäftsprozesse, Anwendungen, Zusammenhänge – Erklärt am Beispielunternehmen Global Bike N2 - Dieser verständliche Einstieg in SAP S/4HANA führt Sie anhand des Beispielunternehmens Global Bike durch die zentralen Abläufe in Vertrieb, Einkauf, Rechnungswesen, Produktion und Lagerverwaltung. Sie werden mit den betriebswirtschaftlichen Grundlagen, den relevanten Organisationsstrukturen und Stammdaten sowie den Prozessen vertraut gemacht. Mithilfe von Praxisbeispielen und Fallstudien sind Sie schon bald SAP-S/4HANA-Profi – für mehr Erfolg in Studium und Beruf! Y1 - 2023 SN - 9783836281560 (Print) SN - 9783836281584 (E-Book) N1 - Unter der Signatur 21 QGT 220 in der Bibliothek Eupener Straße vorhanden. PB - Rheinwerk Verlag CY - Bonn ER - TY - JOUR A1 - Šakić, Bogdan A1 - Marinković, Marko A1 - Butenweg, Christoph A1 - Klinkel, Sven ED - Yang, J. T1 - Influence of slab deflection on the out-of-plane capacity of unreinforced masonry partition walls JF - Engineering Structures N2 - Severe damage of non-structural elements is noticed in previous earthquakes, causing high economic losses and posing a life threat for the people. Masonry partition walls are one of the most commonly used non-structural elements. Therefore, their behaviour under earthquake loading in out-of-plane (OOP) direction is investigated by several researches in the past years. However, none of the existing experimental campaigns or analytical approaches consider the influence of prior slab deflection on OOP response of partition walls. Moreover, none of the existing construction techniques for the connection of partition walls with surrounding reinforced concrete (RC) is investigated for the combined slab deflection and OOP loading. However, the inevitable time-dependent behaviour of RC slabs leads to high values of final slab deflections which can further influence boundary conditions of partition walls. Therefore, a comprehensive study on the influence of slab deflection on the OOP capacity of masonry partitions is conducted. In the first step, experimental tests are carried out. Results of experimental tests are further used for the calibration of the numerical model employed for a parametric study. Based on the results, behaviour under combined loading for different construction techniques is explained. The results show that slab deflection leads either to severe damage or to a high reduction of OOP capacity. Existing practical solutions do not account for these effects. In this contribution, recommendations to overcome the problems of combined slab deflection and OOP loading on masonry partition walls are given. Possible interaction of in-plane (IP) loading, with the combined slab deflection and OOP loading on partition walls, is not investigated in this study. KW - Masonry partition walls KW - Earthquake KW - Out-of-plane capacity KW - Slab deflection Y1 - 2023 U6 - https://doi.org/10.1016/j.engstruct.2022.115342 SN - 0141-0296 VL - 276 PB - Elsevier CY - Amsterdam ER - TY - THES A1 - Koch, Greta T1 - Eine monothematische Publikation zum Thema "Zeit" N2 - Zeit spielt in unser aller Leben eine allgegenwärtige Rolle. Sie ist immer da, war schon immer da und nimmt ihren Lauf, ganz egal was wir tun. Aber was macht die Zeit und was hat sie für einen Einfluss auf uns? Ist sie unsere ständige Begleiterin oder unsere »Gegnerin«? Wie unterschiedlich wir auf Zeit blicken können, was sie bewirkt und wie unser Umgang mit ihr das Leben beeinflusst, zeigt die Reihe an monothematischen Magazinen »about time«. Das Thema wird aus unterschiedlichsten Blickwinkeln beleuchtet und soll so eine gewisse Sensibilität für den Umgang mit der eigenen Zeit schaffen — denn sie ist am Ende das Wertvollste, das bleibt. KW - Magazin KW - Editorial KW - Sammlung KW - Print KW - Zeit Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Thoma, Andreas A1 - Stiemer, Luc A1 - Braun, Carsten A1 - Fisher, Alex A1 - Gardi, Alessandro G. T1 - Potential of hybrid neural network local path planner for small UAV in urban environments T2 - AIAA SCITECH 2023 Forum N2 - This work proposes a hybrid algorithm combining an Artificial Neural Network (ANN) with a conventional local path planner to navigate UAVs efficiently in various unknown urban environments. The proposed method of a Hybrid Artificial Neural Network Avoidance System is called HANNAS. The ANN analyses a video stream and classifies the current environment. This information about the current Environment is used to set several control parameters of a conventional local path planner, the 3DVFH*. The local path planner then plans the path toward a specific goal point based on distance data from a depth camera. We trained and tested a state-of-the-art image segmentation algorithm, PP-LiteSeg. The proposed HANNAS method reaches a failure probability of 17%, which is less than half the failure probability of the baseline and around half the failure probability of an improved, bio-inspired version of the 3DVFH*. The proposed HANNAS method does not show any disadvantages regarding flight time or flight distance. Y1 - 2023 U6 - https://doi.org/10.2514/6.2023-2359 N1 - AIAA SCITECH 2023 Forum, 23-27 January 2023, National Harbor, Md & Online PB - AIAA CY - Reston, Va. ER - TY - THES A1 - Kouchev, Veronique T1 - Shiba Moments : 2D Adventure Story Game N2 - Shiba Moments ist ein 2D-Top-Down-Abenteuer Story-Spiel über die Wertschätzung der Zeit, die wir mit unseren Haustieren verbringen. Als Hundebesitzerin Conny wandert der / die Spieler:in durch eine Shiba-Traumwelt, die vergangene Momente mit ihrem Hund assoziieren und sich mit eigenen seltsamen Träumen vermischen. Die Spieler:innen erwartet eine Geschichte voller Emotionen, dunklem Humor und verrückter Ereignisse! KW - Computerspiel KW - 2D KW - Storytelling KW - Shiba Inu KW - niedlich Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Kreutz, Delayne Sara T1 - Auf links gedreht : eine informative Auseinandersetzung mit der Benachteiligung durch Linkshändigkeit N2 - Unsere Welt funktioniert seit jeher völlig rechtsorientiert. Rechtshändigkeit stellt die Norm dar, während Linkshändigkeit eine Besonderheit ist – ein Phänomen, oder gar eine Kuriosität, welche im Laufe der Menschheitsgeschichte bei Weitem nicht so akzeptiert wurde wie in der Gegenwart. Das Buch „Auf links gedreht“ thematisiert die Wahrnehmung der linken Seite in der Vergangenheit und sensibilisiert für die Probleme von Linkshänder:innen in der heutigen Zeit. Ein Buch, fernab der Norm, mit einer Gestaltung ausgelegt auf die Linkshändigkeit. Es führt Rechtshänder:innen die Problematik vor Augen. So wird sich nicht nur inhaltlich für eine händigkeitsneutrale Gestaltung eingesetzt. Ein Buch über die linke Hand, gestaltet für die linke Hand. KW - Linkshändigkeit KW - Print KW - Publikation KW - Sachbuch KW - Editorial Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Krüger, Niklas A1 - Stupp, Anna-Lena T1 - Raubgut : Zusammenführung der in Deutschland befindlichen Objekte aus dem ehemaligen Königreich Benin N2 - Die Benin-Objekte wurden vor 126 Jahren durch britische Kolonialmächte aus ihrer Heimat geraubt. Sie wurden über die ganze Welt verstreut und ca. 1500 Stücke landeten auch in deutschen Museen. Bei den Objekten handelt es sich um das kulturelle Erbe und das Nationalarchiv eines Volkes. In „Raubgut“ finden die Leser:innen eine Zusammenführung aller Objekte, die sich in deutschen Museen befinden. „Raubgut“ ist das Ergebnis einer umfangreichen Recherche, in der die erste Zusammenführung auf bildlicher Ebene in einem Bildarchiv, auf textlicher Ebene u. a. in einer einzigartigen Inventarliste sowie in Texten zum ehemaligen Königreich, dem Kolonialismus und weiteren Themen gegeben ist. Nach all den Jahren wurde am 01. Juli 2022 die vollständige Eigentumsübertragung an Nigeria beschlossen. Ob das nun der Grundstein für die Entwicklung der Restitutionsdebatte war, wird sich in Zukunft zeigen. KW - Benin Bronzen KW - Rückgabe KW - Kulturgut KW - Museum KW - Sammlung Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Laschet, Kimberly T1 - Berufsbegleitende Bildungsplattform für Designer : Lebenslanges Lernen für alle. N2 - Academia ist eine berufsbegleitende Bildungsplattform für Designer:innen. Die Mission der Plattform ist es, Designer:innen während ihres kreativen Ausbildungsweges und auch lange nach ihrem Berufseinstieg zu begleiten und zu unterstützen. Durch Videokurse, Online-Lehrveranstaltungen, etwa Gruppenseminare, Design Talks und Challenges sollen Nutzer:innen passend auf ihre Interessen und ihrem Niveau entsprechend gefördert werden. Academias Fokus liegt auf eine nachhaltige Weiterentwicklung der Fähigkeiten und der fachlichen Expertise. KW - Design KW - Lernen KW - Expertise KW - Weiterentwicklung KW - Kreativer Bildungsweg Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Chircu, Alina A1 - Czarnecki, Christian A1 - Friedmann, Daniel A1 - Pomaskow, Johanna A1 - Sultanow, Eldar T1 - Towards a Digital Twin of Society T2 - Proceedings of the 56th Hawaii International Conference on System Sciences 2023 N2 - This paper describes the potential for developing a digital twin of society- a dynamic model that can be used to observe, analyze, and predict the evolution of various societal aspects. Such a digital twin can help governmental agencies and policy makers in interpreting trends, understanding challenges, and making decisions regarding investments or policies necessary to support societal development and ensure future prosperity. The paper reviews related work regarding the digital twin paradigm and its applications. The paper presents a motivating case study- an analysis of opportunities and challenges faced by the German federal employment agency, Bundesagentur f¨ur Arbeit (BA), proposes solutions using digital twins, and describes initial proofs of concept for such solutions. KW - Digital twin KW - Digital transformation KW - Prototype KW - Society KW - Stress testing Y1 - 2023 SN - 978-0-9981331-6-4 N1 - 56th Hawaii International Conference on System Sciences, HICSS 2023, Maui, Hawaii, USA, January 3-6, 2023 SP - 6748 EP - 6757 PB - University of Hawai'i CY - Honolulu ER - TY - THES A1 - Vogt, Linda T1 - Bambus als Baumaterial : eine nachhaltige Alternative zu herkömmlichen Rohstoffen? N2 - "Das Editorial greift die Thematik der aktuellen Klimakrise auf und beleuchtet diese im Bereich des nachhaltigen Bauens. Denn durch das stetige Wachstum der menschlichen Bevölkerung in Kombination mit dem Anstieg des Pro-Kopf-Verbrauchs werden globale Ressourcen immer stärker belastet. Ziel der Arbeit ist es, die aktuelle Situation des Klimawandels aus einer Perspektive zu betrachten, der sich die meisten nicht bewusst sind. Denn besonders das Bauwesen trägt einen erheblichen Anteil zum Klimawandel bei. In der Publikation werden Texte zum Thema Klimawandel und nachhaltiges Bauen behandelt sowie fotografische Anwendungsbeispiele im Bereich der Bambus-Architektur gezeigt. Das Projekt präsentiert Lösungsansätze, wie herkömmliche Rohstoffe durch verarbeiteten Bambus ergänzt bzw. ersetzt werden können. Dadurch kann ein entscheidender Beitrag zur Bekämpfung des Klimawandels geleistet werden. Bambus bietet dahingehend viele Möglichkeiten. Bei richtiger Verarbeitung vereint er viele der geforderten Ansprüche nachhaltigen Bauens. Der Rohstoff ist stark und flexibel zugleich. Er bindet Kohlenstoff, reinigt kontaminierte Böden, beugt Erosionen vor und weist eine nahezu negative CO2-Bilanz auf. Wie kann es gelingen, diesen Rohstoff in westlichen Ländern als Baumaterial zu integrieren?" KW - Klimakrise KW - Nachhaltigkeit KW - nachhaltiges Bauen KW - Urbanisierung KW - Bambus Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Westhoff, Katharina T1 - Fensterleben : eine Sammlung über das Treffen von privatem und öffentlichem Leben N2 - Im Projekt „Fensterleben” werden Alltagsgeschichten, die sich vor und in einer Erdgeschosswohnung abspielen, graphisch als Videos aufbereitet. In einer mehrteiligen Serie werden die Eindrücke und Perspektiven auf „Bürgersteig-Geschehnisse” und was hinter den Fenstern passiert, veranschaulicht. Besonderes Interesse gilt dem Zusammenspiel von privatem und öffentlichem Raum: was wurde zwischen Fensterbank und Bürgersteig ausgetauscht und weitergegeben. KW - Kurzfilme KW - Fenster KW - Serie KW - Pizza KW - Telefonat Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Williams, Vivian T1 - Entwicklung eines neuen Erscheinungsbildes für Die Staatliche Antikensammlung in München N2 - Die Staatliche Antikensammlung in München ist eine antike Kunstsammlung, bestehend aus zwei Kunsthäusern. Das Haus der Glyptothek befindet sich auf der Nordseite und die Antikensammlung auf der Südseite des Königsplatzes. Während die Glyptothek Skulpturen ausstellt, zeigt die Antikensammlung Gebrauchsgegenstände und Objekte aus der etruskischen, griechischen und römischen Epoche. Sie gehört mit ihrer Kunstsammlung zu den weltweit führenden ihrer Art. In seinem Vorhaben, das Kulturerbe zu wahren, legt das Museum besonders hohen Wert auf Bildung und Vermittlung. Um dies langfristig zu gewährleisten, ist ein ausgeglichenes Erscheinungsbild zwischen Klassik und Modernität unentbehrlich. Die griechische Stilepoche zeichnet sich in ihrer abstrakten Nutzung von geometrischen Grundformen aus. Im Zusammenspiel von geometrischen Formen und Abstrahierungen entsteht ein neues Erscheinungsbild. KW - Klassizismus KW - Modernität KW - Abstrahierung KW - Kunstsammlung KW - Griechisch Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Benavides, Lucie T1 - INKAS : User Experience und User Interface einer bestehenden CPQ-Webanwendung zur Erstellung von Konfiguratoren für variantenreiche Produkte. N2 - Im Rahmen dieser Masterarbeit wird die komplexe CPQ-Branchenlösung INKAS der it-motive AG konzeptionell und gestalterisch überarbeitet. Die mehrjährige Entwicklung von INKAS und etlicher separater Komponenten hat zu einer zum Teil inkonsistenten Oberfläche geführt, die Schwierigkeiten bei der Benutzung aufweist. Das neue User Interface, welches diese Masterarbeit entwickelt, soll durch einheitliche Interaktionsprinzipien zum einen die Usability und bestehende Funktionalitäten verbessern und zum anderen neue Funktionen leichter integrierbar machen. Diese Masterarbeit demonstriert somit ein Vorgehensmodell, durch welches komplexe existierende Branchenlösungen mithilfe eines nutzerzentrierten Redesigns eine nachhaltig verbesserte Produktqualität erreichen und die Integration neuer Technologien ermöglicht. In diesem Zusammenhang wird auch exemplarisch aufgezeigt, wie Designleistungen methodisch in bestehende agile Softwareentwicklungsprozesse integriert werden können. KW - CPQ KW - UI/UX-Design KW - Usability KW - Softwareentwicklung KW - Redesign Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Gaigall, Daniel ED - AitSahlia, Farid T1 - Allocating and forecasting changes in risk JF - Journal of risk N2 - We consider time-dependent portfolios and discuss the allocation of changes in the risk of a portfolio to changes in the portfolio’s components. For this purpose we adopt established allocation principles. We also use our approach to obtain forecasts for changes in the risk of the portfolio’s components. To put the approach into practice we present an implementation based on the output of a simulation. Allocation is illustrated with an example portfolio in the context of Solvency II. The quality of the forecasts is investigated with an empirical study. KW - portfolio risk KW - allocation KW - forecast KW - covariance principle KW - conditional expectation principle Y1 - 2023 U6 - https://doi.org/10.21314/JOR.2022.048 SN - 1755-2842 SN - 1465-1211 VL - 25 IS - 3 SP - 1 EP - 24 PB - Infopro Digital Risk CY - London ER -