TY  - CHAP
A1  - Wagner, Thorsten
A1  - Kohl, Claus-Dieter
A1  - Fröba, Michael
A1  - Tiemann, Michael
T1  - Gas sensing properties of ordered mesoporous SnO2
N2  - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.
KW  - Biosensor
KW  - Tin oxide
KW  - sensing properties
KW  - CO
KW  - humidity
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422
ER  - 
TY  - CHAP
A1  - Mirmohseni, Abdolreza
A1  - Rostamizadeh, Kobra
T1  - Quartz crystal nanobalance in conjunction with principal component analysis for  identification of volatile organic compounds
N2  - Quartz crystal nanobalance (QCN) sensors are considered as powerful masssensitive sensors to determine materials in the sub-nanogram level. In this study, a single piezoelectric quartz crystal nanobalance modified with polystyrene was employed to detect benzene, toluene, ethylbenzene and xylene (BTEX compounds). The frequency shift of the QCN sensor was found to be linear against the BTEX compound concentrations in the range about 1-45 mg l-1. The correlation coefficients for benzene, toluene, ethylbenzene, and xylene were 0.991, 0.9977, 0.9946 and 0.9971, respectively. The principal component analysis was also utilized to process the frequency response data of the single piezoelectric crystal at different times, considering to the different adsorption-desorption dynamics of BTEX compounds. Using principal component analysis, it was found that over 90% of the data variance could still be explained by use of two principal components (PC1 and PC2). Subsequently, the successful identification of benzene and toluene was possible through the principal component analysis of the transient responses of the polystyrene modified QCN sensor. The results showed that the polystyrene-modified QCN had favorable identification and quantification performances for the BTEX compounds.
KW  - Biosensor
KW  - Quartz crystal nanobalance (QCN)
KW  - BTEX compounds
KW  - principal component
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1434
ER  - 
TY  - CHAP
A1  - Kreutz, Christian
A1  - Lörgen, Jürgen
A1  - Graewe, Boris
A1  - Bargon, Joachim
A1  - Yoshida, Mayumi
A1  - Freso, Zachary M.
A1  - Frèchet, Jean M. J.
T1  - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors
N2  - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).
KW  - Biosensor
KW  - Quartz micro balances
KW  - electronic noses dendronized polymers inverted mesa technology
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445
ER  - 
TY  - CHAP
A1  - Rabner, Arthur
A1  - Shacham, Yosi
T1  - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging
N2  - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.
KW  - Biosensor
KW  - Fluorescence
KW  - imaging
KW  - lab-on-chip
KW  - fluidic
KW  - lenslet array
KW  - LED chip
KW  - image sensor
KW  - biosensor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456
ER  - 
TY  - CHAP
A1  - Förster, Arnold
A1  - Stock, Jürgen
A1  - Montanari, Simone
A1  - Lepsa, Mihail Ion
A1  - Lüth, Hans
T1  - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry
N2  - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.
KW  - Biosensor
KW  - Gunn diode
KW  - microwave generation
KW  - GaAs hot electron injector
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462
ER  - 
TY  - CHAP
A1  - Platen, Johannes
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique
N2  - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures.
KW  - Biosensor
KW  - Nanostructuring
KW  - layer expansion
KW  - pattern-size reduction
KW  - self-aligned patterning
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477
ER  - 
TY  - CHAP
A1  - Pijanowska, Dorota G.
A1  - Remiszewska, Elzbieta
A1  - Pederzolli, Cecilia
A1  - Lunelli, Lorenzo
A1  - Vendano, Michele
A1  - Canteri, Roberto
A1  - Dudzinski, Konrad
A1  - Kruk, Jerzy
A1  - Torbicz, Wladyslaw
T1  - Surface modification for microreactor fabrication
N2  - In this paper, methods of surface modification of different supports, i.e. glass and polymeric beads for enzyme immobilisation are described. The developed method of enzyme immobilisation is based on Schiff’s base formation between the amino groups on the enzyme surface and the aldehyde groups on the chemically modified surface of the supports. The surface of silicon modified by APTS and GOPS with immobilised enzyme was characterised by atomic force microscopy (AFM), time-of-flight secondary ion mass spectroscopy (ToF-SIMS) and infrared spectroscopy (FTIR). The supports with immobilised enzyme (urease) were also tested in combination with microreactors fabricated in silicon and Perspex, operating in a flow-through system. For microreactors filled with urease immobilised on glass beads (Sigma) and on polymeric beads (PAN), a very high and stable signal (pH change) was obtained. The developed method of urease immobilisation can be stated to be very effective.
KW  - Biosensor
KW  - Microreactors
KW  - surface modification
KW  - enzyme immobilisation
KW  - lab-on-a-chip
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1480
ER  - 
TY  - CHAP
A1  - Bukhari, Syed Faisal Ahmed
A1  - Yang, Wuqiang
T1  - Multi-interface level sensors and new development in monitoring and control of oil separators
N2  - In the oil industry, huge saving may be made if suitable multi-interface level measurement systems are employed for effectively monitoring crude oil separators and efficient control of their operation. A number of techniques, e.g. externally mounted displacers, differential pressure transmitters and capacitance rod devices, have been developed to measure the separation process with gas, oil, water and other components. Because of the unavailability of suitable multi-interface level measurement systems, oil separators are currently operated by the trial-and-error approach. In this paper some conventional techniques, which have been used for level measurement in industry, and new development are discussed.
KW  - Biosensor
KW  - Level sensor
KW  - multi-interface measurement
KW  - electrical capacitance tomography
KW  - ECT
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1498
ER  - 
TY  - CHAP
A1  - Tymecki, Lukasz
A1  - Glab, Stanislaw
A1  - Koncki, Robert
T1  - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film  technology
N2  - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.
KW  - Biosensor
KW  - Potentiometry
KW  - thick-film technology
KW  - screen-printing
KW  - ion-selective electrodes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506
ER  - 
TY  - CHAP
A1  - Bührig-Polaczek, Andreas
A1  - Röth, Thilo
A1  - Baumeister, E.
A1  - Nowack, N.
A1  - Süßmann, Torsten
T1  - Hybride Leichtbaustrukturen in Stahlblech-Leichtmetall Verbundguss
N2  - Stahl-Leichtmetall-Hybride mit hohen Leistungspotentialen können heute wirtschaftlich abgebildet werden und eignen sich möglicherweise auch zum Einsatz in Fahrzeugkarosserien
KW  - Karosseriebau
KW  - Verbundguss
KW  - Stahlblech-Leichtmetall Verbundguss
KW  - Stahlblech-Leichtmetall-Hybride
KW  - Lightweight car body construction
Y1  - 2006
ER  - 
TY  - GEN
A1  - Höttges, Jörg
A1  - Cordes, Jürgen
A1  - Wirtz, Dominika
A1  - Moers, Monika
A1  - Gehlen, Tanja
A1  - Aldenhoven, Frederick
T1  - E-Learning AutoCAD
N2  - Schrittweise Einführung in die Welt des AutoCAD. Nach jedem Abschnitt besteht die Möglichkeit, das neue Wissen direkt anzuwenden. Mit Wissensprüfungen und Übungen nach jedem Kapitel. (Modul wird noch überarbeitet) 1. Der Anfang mit AutoCAD 2. Grundlagen zur Anfertigung einer Zeichnung 3. Layer 4. Texte und Bemaßung 5. Weiterführende Zeichenwerkzeuge 6. Layout und Plotten
KW  - CAD
KW  - AutoCAD
KW  - AutoCAD 2005
KW  - AutoCAD
Y1  - 2006
N1  - Zugriff nur über das Intranet der FH Aachen
ER  - 
TY  - GEN
A1  - Höttges, Jörg
A1  - Cordes, Jürgen
A1  - Wirtz, Dominika
A1  - Moers, Monika
A1  - Gehlen, Tanja
A1  - Aldenhoven, Frederick
T1  - E-Learning Access
N2  - Schrittweise Einführung in Access. Nach jedem Abschnitt besteht die Möglichkeit, das neue Wissen direkt anzuwenden. Mit Wissensprüfungen und Übungen nach jedem Kapitel. 1. Grundbegriffe aus der Datenbank 2. Eine Datenbank planen 3. Tabellen erstellen und bearbeiten 4. Abfragen erstellen und bearbeiten 5. Formulare - Tuning für die Daten 6. Berichte - echt einfach
KW  - ACCESS 2003
KW  - ACCESS <Programm>
KW  - Relationale Datenbank
KW  - Access
Y1  - 2006
N1  - Zugriff nur über das Intranet der FH Aachen
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Rapid Manufacturing - eine interdisziplinäre Strategie
N2  - Als um 1987 ein Verfahren namens Stereolithographie und ein Stereolithography Apparatus (SLA) vorgestellt wurden, war der Traum von der Herstellung beliebiger dreidimensionaler Bauteile direkt aus Computerdaten und ohne bauteilspezifische Werkzeuge Realität geworden. Ein Anwendungs-Szenario wurde gleich mitgeliefert. Diese Technologie würde es möglich machen, die gesamte Ersatzteilversorgung der Amerikanischen Pazifikflotte mittels ein paar dieser Maschinen, umfangreicher Datenstätze und genügend Rohmaterial vor Ort auf einem Flugzeugträger direkt nach Bedarf zu fertigen. Diese Vorstellung definierte schon damals die direkte digitale Fertigung, das Rapid Manufacturing. In der Realität bestanden die mit diesem Verfahren hergestellten Bauteile nur aus Kunststoff, waren ungenau, bruchempfindlich und klebrig und allein in der Produktentwicklung, eben als Prototypen zu benutzen. Sie waren schnell verfügbar, weil zu Ihrer Herstellung keine Werkzeuge benötigt wurden. Folgerichtige und zudem modern hießen sie: Rapid Prototyping. Rapid Prototyping wurde schnell zum Synonym eines neuen Zweiges der Fertigungstechnik, der Generativen Fertigungstechnik. Die weitere Entwicklung brachte neue Verfahren, höhere Genauigkeiten, verbesserte Werkstoffe und neue Anwendungen. Die Herstellung von Negativen, also Werkzeugen, mit dem gleichen Verfahren wurde marketing-getrieben Rapid Tooling genannt und als die ersten Bauteile nicht mehr als Prototypen, sondern als Endprodukte eingesetzt wurden, nannte man dies Rapid Manufacturing - das Ziel war erreicht. War das Ziel wirklich erreicht? Ist es Rapid Manufacturing, wenn ein generativ gefertigtes Bauteil die gewünschte Spezifikation erreicht? Was muss passieren, damit aus dem Phänomen Rapid Prototyping eine Strategie wird, die geeignet ist, einen Paradigmenwechsel von der heutigen Hersteller-induzierten Massenproduktion von Massenartikeln zur Verbraucher-induzierten (und verantworteten) Massenproduktion von Einzelteilen für jedermann ermöglichen und möglicherweise unsere Arbeits- und Lebensformen tiefgreifend zu beeinflussen? Im Beitrag wird der Begriff der (Fertigungs-) Strategie „Rapid Manufacturing“ näher beleuchtet. Es wird diskutiert, welche Maßnahmen auf der technischen und der operative Ebene getroffen werden müssen, damit die generative Fertigungstechnik im Sinne dieser Strategie umgesetzt werden kann. Beispiele belegen, dass diese Entwicklung bereits begonnen hat und geben Anregungen für eine konstruktive Diskussion auf der RapidTech 2006.
N2  - As a process called stereolithography and a stereolithography apparatus (SLA) was presented in 1987, the dream of manufacturing any three-dimensional component directly from computer data and without component-specific tools became reality. An application scenario was supplied at the same time. This technology would make it possible to produce the entire spare parts requirement of the American Pacific Fleet merely through the use of a couple of such machines, extensive datasets and enough raw material on board an aircraft carrier directly as required. This image defined direct digital fabrication, rapid manufacturing, even at that time. In reality, this procedure only managed to produce components in plastic which were imprecise, fragile and sticky and only usable as prototypes in product development. They were rapidly available, because no tools were required for their manufacture. Consequentially, they are now known as Rapid Prototyping in modern jargon. Rapid Prototyping quickly became a synonym for a new branch of production engineering known as generative production engineering. Continued development brought new processes, improved accuracy, improved materials and new applications. The manufacturing of negatives, in other words tools, using the same procedure was quickly named rapid tooling by the marketing sector, and once the first components were used as final products instead of just prototypes the process was renamed "rapid manufacturing" - the goal had been reached. Was the goal really reached? Is it rapid manufacturing if a generatively manufactured component reaches the required specifications? What has to happen so that the rapid prototyping phenomenon becomes a strategy which is suitable for enabling the paradigm change from current manufacture-induced mass production of mass articles to consumer-induced (and consumer-responsible) mass production of single parts for anyone, and in all possibility makes dramatic changes in our way of working and living? The lecture includes detailed information about the (production) strategy term "rapid manufacturing". We will be discussing which measures need to be taken on the technical and operative level so that generative production engineering can be implemented in the sense of this strategy. Examples will show that this development has already started, and should provoke stimulation leading to constructive discussion during RapidTech 2006.
KW  - Rapid prototyping
KW  - Rapid Manufacturing
KW  - Rapid Prototyping
KW  - Stereolithographie
KW  - Generative Fertigungstechnik
KW  - Rapid prototyping
KW  - rapid manufacturing
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Graph Transformations for Dynamic Knowledge Processing
N2  - In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. HICSS '06 http://dx.doi.org/10.1109/HICSS.2006.200 The conceptual design phase at the beginning of the building construction process is not adequately supported by any CAD-tool. Conceptual design support needs regarding two aspects: first, the architect must be able to develop conceptual sketches that provide abstraction from constructive details. Second, conceptually relevant knowledge should be available to check these conceptual sketches. The paper deals with knowledge to formalize for conceptual design. To enable domain experts formalizing knowledge, a graph-based specification is presented that allows the development of a domain ontology and design rules specific for one class of buildings at runtime. The provided tool support illustrates the introduced concepts and demonstrates the consistency analysis between knowledge and conceptual design.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Rule-Dependencies for Visual Knowledge Specification in Conceptual Design
N2  - In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - JOUR
A1  - Balzer, Hermann
A1  - Brakmann, Heinrich
A1  - Dippel, Friedrich
A1  - Dietsch, Johannes M.
T1  - Eine empirische Untersuchung zur Veräußerung von Konzernteilen an Private-Equity-Investoren. Arbeitskreis „Finanzierung“ der Schmalenbach-Gesellschaft für Betriebswirtschaft e.V.  / Balzer, Hermann, Brakmann, Heinrich ; Dippel, Friedrich ; Dietsch, Johann
JF  - Zfbf [Elektronische Ressource] : Schmalenbachs Zeitschrift für betriebswirtschaftliche Forschung = Schmalenbach business review / hrsg. im Auftr. d. Schmalenbach-Gesellschaft für Betriebswirtschaft e.V.. 58 (2006), H. 2
Y1  - 2006
SN  - 0341-2687
IS  - 2
SP  - 235
EP  - 264
ER  - 
TY  - BOOK
A1  - Weigand, Christoph
T1  - Statistik mit und ohne Zufall : eine anwendungsorientierte Einführung ; mit 10 Tabellen / Christoph Weigand
Y1  - 2006
SN  - 3-7908-1693-0
N1  - [Neuere Aufl. vorh.] https://doi.org/10.1007/978-3-662-59309-7
PB  - Physica-Verl.
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Gossla, Ulrich
T1  - Flachdecken aus Stahlfaserbeton
JF  - Beton- und Stahlbetonbau. 101 (2006), H. 2
Y1  - 2006
SN  - 0005-9900
SP  - 94
EP  - 102
ER  - 
TY  - JOUR
A1  - Pietsch, Wolfram
T1  - Geschäftsmodelle als Grundlage für das Software-Produktmanagement
JF  - Multikonferenz Wirtschaftsinformatik 2006 / Franz Lehner ... (Hrsg.).  	Bd. Tagungsband 2
Y1  - 2006
SN  - 3-936771-62-6
N1  - Multikonferenz Wirtschaftsinformatik <2006, Passau>
SP  - 211
EP  - 222
PB  - GITO
CY  - Berlin
ER  - 
TY  - BOOK
A1  - Schneider, Bettina
A1  - Schneider, Wilhelm
T1  - Einführung in die Unternehmensbesteuerung : systematische Darstellung in Übersichten / Bettina Schneider ; Wilhelm Schneider. 2. Aufl., Studienausg.
Y1  - 2006
SN  - 3-86537-824-2
N1  - Reihe Betriebswirtschaftslehre in Übersichten ; 1
PB  - Cuvillier
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Ritz, Thomas
A1  - Stender, Michael
T1  - Modeling of B2B mobile commerce processes
JF  - International Journal of Production Economics
Y1  - 2006
U6  - https://doi.org/10.1016/j.ijpe.2005.05.017
SN  - 0925-5273
VL  - 101
IS  - 1
SP  - 128
EP  - 139
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, A.
A1  - Schütze, A.
A1  - Wallach, D.
T1  - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF  - Mst-News (2006)
Y1  - 2006
SN  - 0948-3128
SP  - 15, 16
EP  - u. 35
ER  - 
TY  - BOOK
A1  - Mühl, Thomas
T1  - Einführung in die elektrische Messtechnik. Grundlagen, Messverfahren, Geräte ; mit 8 Tabellen und 53 Beispielen. 2., durchges. Aufl.
Y1  - 2006
SN  - 3-8351-0094-7
N1  - neuere Aufl. vorhanden
PB  - Teubner
CY  - Wiesbaden
ER  - 
TY  - JOUR
A1  - Frings, Michael
T1  - Pflichtverletzungen des Abschlussprüfers - ein Grund zur Besorgnis der Befangenheit?
JF  - Die Wirtschaftsprüfung : WPg. 59 (2006)
Y1  - 2006
SN  - 0043-6313
SP  - 821
EP  - 830
ER  - 
TY  - JOUR
A1  - Frings, Michael
T1  - Die Abberufung des Geschäftsführers in der GmbH. Eine systematische Darstellung der Grundlagen und praktischen Durchsetzungsmöglichkeiten
JF  - Neue Wirtschaftsbriefe NWB. 5 (2006)
Y1  - 2006
SN  - 0028-3460
N1  - NWB online vom 30.01.2006 Fach 18, Seite 4307-4318
SP  - 345
EP  - 356
ER  - 
TY  - JOUR
A1  - Heuermann, Holger
A1  - Erkens, H.
T1  - Novel RF switch concepts for differential wireless communications frontends. Erkens, H.; Heuermann, H.
JF  - IEEE Transactions on Microwave Theory and Techniques. 54 (2006), H. 6, Part 1
Y1  - 2006
SN  - 0018-9480
SP  - 2376
EP  - 2382
ER  - 
TY  - JOUR
A1  - Frings, Michael
T1  - Die Befangenheit des Abschlussprüfers. Zur Neuregelung der Befangenheitsregelungen der Wirtschaftsprüfer/vereidigten Buchprüfer
JF  - Neue Wirtschaftsbriefe NWB. 27 (2006)
Y1  - 2006
SN  - 0028-3460
N1  - NWB online vom 03.07.2006 Fach 18, Seite 4343-4352
SP  - 2287
EP  - 2296
ER  - 
TY  - JOUR
A1  - Frings, Michael
T1  - Die neue Rechtsprechung des BGH zu den Schrottimmobilienfällen. Die Rechte des Verbrauchers bei kreditfinanziertem Immobilienerwerb
JF  - Neue Wirtschaftsbriefe NWB. 36 (2006)
Y1  - 2006
SN  - 0028-3460
N1  - NWB online vom 04.09.2006 Fach 21, Seite 1565-1578
SP  - 3033
EP  - 3046
ER  - 
TY  - JOUR
A1  - Kloock, Joachim P.
A1  - Poghossian, Arshak
A1  - Schumacher, K.
A1  - Rosenkranz, C.
A1  - Schultze, J. W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Funktionsprüfung und Charakterisierung von ionensensitiven Feldeffekttransistoren (ISFETs) auf Waferebene mittels Mikrotropfenzelle für den zukünftigen Einsatz in der Sensorproduktion
JF  - Sensoren und Messsysteme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14. März 2006 in Freiburg/Breisgau / Veranst.: Informationstechnische Gesellschaft im VDE (ITG) ; VDE/VDI-Gesellschaft Mess- und Automatisierungstechnik (GMA). Wiss. Tagungsleitung: L. M. Reindl
Y1  - 2006
SN  - 3-8007-2939-3
N1  - Fachtagung Sensoren und Messsysteme <13, 2006, Freiburg, Breisgau>
SP  - 257
EP  - 260
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Müller-Veggian, Mattea
A1  - Moro, D.
A1  - Ferreti, A.
A1  - Colautti, P.
T1  - The new articulated twin mini TEPC
JF  - Annual Report  2006 / Istituto Nazionale di Fisica Nucleare <Frascati> / Laboratori Nazionali <Legnaro>
Y1  - 2006
SP  - 273
CY  - Legnaro
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Kim, Jihoe
A1  - Darley, Daniel
A1  - Buckel, Wolfgang
T1  - Characterization of (R)-2-hydroxyisocaproate dehydrogenase and a family III coenzyme A transferase involved in reduction of L-leucine to isocaproate by Clostridium difficile / Kim, J. ; Darley, D. ; Selmer, T. ; Buckel, W.
JF  - Applied and Environmental Microbiology. 72 (2006), H. 9
Y1  - 2006
SN  - 0099-2240
N1  - PMID: 16957230
SP  - 6062
EP  - 6069
ER  - 
TY  - JOUR
A1  - Selmer, Thorsten
A1  - Yu, Lihua
A1  - Blaser, Martin
A1  - Andrei, Paula I.
T1  - 4-Hydroxyphenylacetate decarboxylases: properties of a novel subclass of glycyl radical enzyme systems / Yu, L. ; Blaser, M. ; Andrei, PI. ; Pierik, AJ. Selmer, T.
JF  - Biochemistry. 31 (2006), H. 45
Y1  - 2006
N1  - PMID: 16878993
SP  - 9584
EP  - 9592
ER  - 
TY  - JOUR
A1  - Dachwald, Bernd
A1  - Seboldt, W.
A1  - Richter, L.
T1  - Multiple rendezvous and sample return missions to near-Earth objects using solar sailcraft / Dachwald, B. ; Seboldt, W. ; Richter, L.
JF  - Acta Astronautica. 59 (2006), H. 8-11
Y1  - 2006
SN  - 0094-5765
N1  - International Conference on Low Cost Planetary Missions <5, 2003, Noordwijk> ; Selected Proceedings
SP  - 768
EP  - 776
ER  - 
TY  - JOUR
A1  - Streun, M.
A1  - Chavan, U.
A1  - Lame, H.
A1  - Parl, C.
A1  - Müller-Veggian, Mattea
A1  - Ziemons, Karl
T1  - Treating the Gain Non-Uniformity of Multi Channel PMTs by Channel-Specific Trigger Levels
JF  - 2006 IEEE Nuclear Science Symposium Conference Record, Vol. 2.
Y1  - 2006
SN  - 1082-3654
SP  - 1301
EP  - 1304
CY  - San Diego, CA
ER  - 
TY  - JOUR
A1  - Heger, Michael
T1  - Qualitätsentwicklung des wissenschaftlichen Service. Ansatz und Erfahrungen der Hochschuldidaktik und Studienberatung - Fachhochschule Aachen 2006
JF  - Qualitätsentwicklung an Hochschulen : Erfahrungen und Lehren aus 10 Jahren Evaluation ; Dokumentation zur gleichnamigen Veranstaltung des Projekts Qualitätssicherung der HRK am 3. und 4. November 2005 im Bonner Wissenschaftszentrum / [HRK, Hochschulrektorenkonferenz. Herbsttagung "Qualitätsentwicklung an Hochschulen, Erfahrungen und Lehren aus 10 Jahren Evaluation. Red.: Jörn Alphei ...]
Y1  - 2006
N1  - Beiträge zur Hochschulpolitik ; 2006,8
SP  - 92
EP  - 97
PB  - HRK, Hochschulrektorenkonferenz
CY  - Bonn
ER  - 
TY  - BOOK
A1  - Mautner, Karin
T1  - Numerical treatment of the Black-Scholes variational inequality in computational finance
Y1  - 2006
N1  - Humboldt-Univ., Diss
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Chwallek, Constanze
A1  - Felden, Brigit
T1  - Wachstumsfinanzierung in der Nachgründungsphase / Chwallek, Constanze ; Felden, Birgit
JF  - Finanz-Betrieb : FB ; Zeitschrift für Unternehmensfinanzierung und Finanzmanagement. 8 (2006), H. 10
Y1  - 2006
SN  - 1437-8981
SP  - 664
EP  - 675
ER  - 
TY  - JOUR
A1  - Chwallek, Constanze
A1  - Felden, Birgit
T1  - Existenzgründung durch Übernahme / Felden, Birgit ; Chwallek, Constanze
JF  - Finanz-Betrieb : FB ; Zeitschrift für Unternehmensfinanzierung und Finanzmanagement. 8 (2006), H. 6
Y1  - 2006
SN  - 1437-8981
SP  - 409
EP  - 418
ER  - 
TY  - BOOK
A1  - Chwallek, Constanze
A1  - Felden, Birgit
T1  - RatingCheck : Wertschöpfungskette / Chwallek, Constanze ; Felden, Birgit
Y1  - 2006
PB  - Deutscher Sparkassen Verlag
CY  - Stuttgart
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Recognition of shape in virtual visualizations
T2  - Proceedings : November 15 - 17, 2006, Technische Universität Darmstadt, Darmstadt, Germany ; PACE, Partners for the advancement of collaborative engineering education
Y1  - 2006
SN  - 978-3-00-020161-5
N1  - International PACE Forum Collaborative Visualization ; (2006, Darmstadt)
SP  - 203
EP  - 209
PB  - Techn. Univ.
CY  - Darmstadt
ER  - 
TY  - JOUR
A1  - Kurz, Melanie
T1  - Der Modell-Roller
JF  - Form : the making of design
Y1  - 2006
SN  - 0015-7678
VL  - 2006
IS  - 209
SP  - 64
EP  - 72
ER  - 
TY  - JOUR
A1  - Timme, Michael
T1  - Schadensersatzansprüche gegen den Insolvenzverwalter wegen Nichterfüllung von Masseverbindlichkeiten im Prozess
JF  - Monatsschrift für deutsches Recht : MdR ; Zeitschrift für die Zivilrechts-Praxis. 26 (2006), H. 24
Y1  - 2006
SN  - 0340-1812
SP  - 1381
EP  - 1383
ER  - 
TY  - JOUR
A1  - Öhlschläger, Peter
A1  - Pes, Michaela
A1  - Osen, Wolfram
A1  - Dürst, Matthias
T1  - An improved rearranged Human Papillomavirus Type 16 E7 DNA vaccine candidate (HPV-16 E7SH) induces an E7 wildtype-specific T cell response / Öhlschläger, Peter ; Pes, Michaela ; Osen, Wolfram ; Dürst, Matthias ; Schneider, Achim ; Gissmann, Lutz ; Kaufman
JF  - Vaccine. 24 (2006), H. 15
Y1  - 2006
SN  - 0264-410X
SP  - 2880
EP  - 2893
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Schieder, Andreas
A1  - Kampmann, Markus
A1  - Vorwerk, Marc
T1  - Network Supported Media Delivery in Ambient Networks (Netzwerkunterstützte Medienverteilung) / Schieder, Andreas ; Kampmann, Markus ; Hartung, Frank ; Vorwerk, Marc ; Rembarz, René
JF  - it - Information Technology . 48 (2006), H. 5
Y1  - 2006
SN  - 1611-2776
N1  - in der Bereichsbibliothek Eupener Str. unter der Signatur 23 Z 376 vorhanden
SP  - 264
EP  - 273
ER  - 
TY  - JOUR
A1  - Hartung, Frank
A1  - Niebert, Norbert
A1  - Schieder, Andreas
A1  - Rembarz, René
T1  - Advances in network-supported media delivery in next-generation mobile systems / Hartung, Frank  ; Niebert, Norbert ; Schieder, Andreas ; Rembarz, René ; Schmid, Stefan ; Eggert, Lars
JF  - IEEE Communications Magazine. 44 (2006), H. 8
Y1  - 2006
SN  - 0163-6804
SP  - 82
EP  - 89
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Roboterfußball - Wissenschaft, die auch Spass macht / Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - RWTH Themen (2006)
Y1  - 2006
SN  - 0179-079X
SP  - 36
EP  - 39
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Strack, Andreas
A1  - Lakemeyer, Gerhard
T1  - Laser-Based Localization with Sparse Landmarks  / Strack, Andreas ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - RoboCup 2005: Robot Soccer World Cup IX
Y1  - 2006
SN  - 978-3-540-35437-6
N1  - Lecture Notes in Computer Science ; 4020
SP  - 569
EP  - 576
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Lakemeyer, Gerhard
T1  - Qualitative World Models for Soccer Robots / Schiffer, Stefan ; Ferrein, Alexander ; Lakemeyer, Gerhard
JF  - Qualitative constraint calculi : application and integration ; KI 2006, 14 - 19 June 2006, Bremen, Germany ; 29th Annual German Conference on Artificial Intelligence ; workshop / Stefan Wölfl ... (eds.)
Y1  - 2006
SN  - 3-88722-666-6
SP  - 3
EP  - 14
PB  - Univ.
CY  - Bremen
ER  - 
TY  - JOUR
A1  - Ferrein, Alexander
A1  - Calmes, Laurent
A1  - Lakemeyer, Gerhard
A1  - Wagner, Hermann
T1  - Von Schleiereulen und fussballspielenden Robotern / Calmes, Laurent ; Ferrein, Alexander ; Lakemeyer, Gerhard ; Wagner, Hermann
JF  - RWTH Themen (2006)
Y1  - 2006
SN  - 0179-079X
SP  - 30
EP  - 33
ER  - 
TY  - JOUR
A1  - Kotliar, Konstantin
A1  - Koshitz, I. N.
A1  - Svetlowa, O. V.
A1  - Zaseeva, M. V.
T1  - Physiological principles of hypotensive therapy of open-angle glaucoma during presbyopic period. Part II Promising algorithms of practical sparing applications / Koshitz, I. N. ; Svetlova, O. V. ; Zaseeva, M. V. ; Shuhaev, S. V. ; Makarov, F. N. ; Kotliar
JF  - Glaukoma (2006)
Y1  - 2006
N1  - Original in Russisch
SP  - 51
EP  - 70
PB  - -
ER  -