TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Martens, D.
A1  - Liu, X.
A1  - Bienstman, P.
A1  - Fahlman, M.
A1  - Schöning, Michael Josef
A1  - Michiels, L.
A1  - Haenen, K.
A1  - Serpengüzel, A.
A1  - Wagner, Patrick
T1  - Photonic studies on polymer-coated sapphire-spheres : a model system for biological ligands
JF  - Sensors and actuators A: Physical
N2  - In this study we show an optical biosensor concept, based on elastic light scattering from sapphire microspheres. Transmitted and elastic scattering intensity of the microspheres (radius 500 μm, refractive index 1.77) on an optical fiber half coupler is analyzed at 1510 nm. The 0.43 nm angular mode spacing of the resonances is comparable to the angular mode spacing value estimated using the optical size of the microsphere. The spectral linewidths of the resonances are in the order of 0.01 nm, which corresponds to quality factors of approximately 105. A polydopamine layer is used as a functionalizing agent on sapphire microspherical resonators in view of biosensor implementation. The varying layer thickness on the microsphere is determined as a function of the resonance wavelength shift. It is shown that polymer functionalization has a minor effect on the quality factor. This is a promising step toward the development of an optical biosensor.
Y1  - 2015
U6  - https://doi.org/10.1016/j.sna.2014.11.024
SN  - 1873-3069 (E-Journal); 0924-4247 (Print)
VL  - 222
SP  - 212
EP  - 219
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Selective Laser Melting of Soda-Lime Glass Powder
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
U6  - https://doi.org/10.1111/ijac.12338
SN  - 1744-7402
VL  - 12
IS  - 1
SP  - 53
EP  - 61
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Process Parameters Development of Selective Laser Melting of Lunar Regolith for On-Site Manufacturing Applications
JF  - International Journal of Applied Ceramic Technology
Y1  - 2015
SN  - 1744-7402
U6  - https://doi.org/10.1111/ijac.12326
VL  - 12
IS  - 1
SP  - 46
EP  - 52
PB  - Wiley-Blackwell
CY  - Oxford
ER  - 
TY  - JOUR
A1  - Warmer, Johannes
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
A1  - Kaul, Peter
T1  - Detection of triacetone triperoxide using temperature cycled metal-oxide semiconductor gas sensors
JF  - Physica status solidi (a)
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431882
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1289
EP  - 1298
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Delle, Lotta E.
A1  - Huck, Christina
A1  - Bäcker, Matthias
A1  - Müller, Frank
A1  - Grandthyll, Samuel
A1  - Jacobs, Karin
A1  - Lilischkis, Rainer
A1  - Vu, Xuan T.
A1  - Schöning, Michael Josef
A1  - Wagner, Patrick
A1  - Thoelen, Roland
A1  - Weil, Maryam
A1  - Ingebrandt, Sven
T1  - Impedimetric immunosensor for the detection of histamine based on reduced graphene oxide
JF  - Physica status solidi (a)
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201431863
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1327
EP  - 1334
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Kümmell, Steffen
A1  - Hillgärtner, Michael
T1  - Inductive charging comfortable and nonvisible charging stations for urbanised areas
T2  - E-Mobility in Europe : trends and good practice
N2  - For a wide acceptance of E-Mobility, a well-developed charging infrastructure is needed. Conductive charging stations, which are today’s state of the art, are of limited suitability for urbanised areas, since they cause a significant diversification in townscape. Furthermore, they might be destroyed by vandalism. Besides for those urbanistic reasons, inductive charging stations are a much more comfortable alternative, especially in urbanised areas. The usage of conductive charging stations requires more or less bulky charging cables. The handling of those standardised charging cables, especially during poor weather conditions, might cause inconvenience, such as dirty clothing etc. Wireless charging does not require visible and vandalism vulnerable charge sticks. No wired connection between charging station and vehicle is needed, which enable the placement below the surface of parking spaces or other points of interest. Inductive charging seems to be the optimal alternative for E-Mobility, as a high power transfer can be realised with a manageable technical and financial effort. For a well-accepted and working public charging infrastructure in urbanised areas it is essential that the infrastructure fits the vehicles’ needs. Hence, a well-adjusted standardisation of the charging infrastructure is essential. This is carried out by several IEC (International Electrotechnical Commission) and national standardisation committees. To ensure an optimised technical solution for future’s inductive charging infrastructures, several field tests had been carried out and are planned in near future.
KW  - E-mobility
KW  - Inductive charging
KW  - Charging stations
KW  - Urban areas
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - https://doi.org/10.1007/978-3-319-13194-8_16
SP  - 297
EP  - 309
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - JOUR
A1  - Takenaga, Shoko
A1  - Schneider, Benno
A1  - Erbay, E.
A1  - Biselli, Manfred
A1  - Schnitzler, Thomas
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Fabrication of biocompatible lab-on-chip devices for biomedical applications by means of a 3D-printing process
JF  - Physica status solidi (a)
N2  - A new microfluidic assembly method for semiconductor-based biosensors using 3D-printing technologies was proposed for a rapid and cost-efficient design of new sensor systems. The microfluidic unit is designed and printed by a 3D-printer in just a few hours and assembled on a light-addressable potentiometric sensor (LAPS) chip using a photo resin. The cell growth curves obtained from culturing cells within microfluidics-based LAPS systems were compared with cell growth curves in cell culture flasks to examine biocompatibility of the 3D-printed chips. Furthermore, an optimal cell culturing within microfluidics-based LAPS chips was achieved by adjusting the fetal calf serum concentrations of the cell culture medium, an important factor for the cell proliferation.
Y1  - 2015
U6  - https://doi.org/10.1002/pssa.201532053
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1347
EP  - 1352
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials
JF  - Electrochimica Acta
N2  - The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor’s thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.06.126
SN  - 0013-4686
VL  - 183
SP  - 130
EP  - 136
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Nakagawa, Masaki
A1  - Michaux, Frank
A1  - Kallweit, Stephan
A1  - Maeda, Kazuhiro
T1  - Unsteady flow measurements in the wake behind a wind-tunnel car model by using high-speed planar PIV
T2  - 11TH International Symposium on Particle Image Velocimetry – PIV15 Santa Barbara, California, September 14-16, 2015
N2  - This study investigates unsteady characteristics of the wake behind a 28%-scale car model in a wind tunnel using highspeed planar particle image velocimetry (PIV). The car model is based on a hatchback passenger car that is known to have relatively high fluctuations in its aerodynamic loads. This study primarily focuses on the lateral motion of the flow on the horizontal plane to determine the effect of the flow motion on the straight-line stability and the initial steering response of the actual car on a track. This paper first compares the flow fields in the wake behind the above mentioned model obtained using conventional and high-speed planar PIV, with sampling frequencies of 8 Hz and 1 kHz, respectively. Large asymmetrically coherent flow structures, which fluctuate at frequencies below 2 Hz, are observed in the results of highspeed PIV measurements, whereas conventional PIV is unable to capture these features of the flow owing to aliasing. This flow pattern with a laterally swaying motion is represented by opposite signs of cross-correlation coefficients of streamwise velocity fluctuations for the two sides of the car model. Effects of two aerodynamic devices that are known to reduce the
fluctuation levels of the aerodynamic loads are then extensively investigated. The correlation analyses reveal that these devices indeed reduce the fluctuation levels of the flow and the correlation values around the rear combination-lamp, but it is found that the effects of these devices are different around the c-pillar.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Breuer, Lars
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
A1  - Thoelen, Ronald
A1  - Wagner, Torsten
T1  - Light-stimulated hydrogel actuators with incorporated graphene oxide for microfluidic applications
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P5.8
SP  - 206
EP  - 209
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Jildeh, Zaid B.
A1  - Kirchner, Patrick
A1  - Wendeler, Luisa
A1  - Bromm, Alexander
A1  - Iken, Heiko
A1  - Wagner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Experimental and numerical evaluation of interdigitated electrode array for monitoring gaseous sterilization processes
T2  - 12. Dresdner Sensor-Symposium 2015
Y1  - 2015
U6  - https://doi.org/10.5162/12dss2015/P3.11
SP  - 163
EP  - 168
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Roosen, Petra
A1  - Feyerl, Günter
T1  - Gender-specific perception and utilization of personal use vehicles
T2  - FISITA World Automotive Congress 2014 : Maastricht, The Netherlands, 2 - 6 June / [organised by the International Federation of Automotive Engineering Societies (FISITA) ...]. Bd. 1
Y1  - 2015
SN  - 978-1-5108-0209-4
SP  - 418
EP  - 425
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - CHAP
A1  - Kilic, S. A.
A1  - Raatschen, Hans-Jürgen
A1  - Astaneh-Asl, A.
A1  - Apaydin, N. M.
T1  - Finite element modeling of the Fatih Sultan Mehmet Suspension Bridge
T2  - Multi-Span Large Bridges - Proceedings of the International Conference on Multi-Span Large Bridges
Y1  - 2015
SN  - 9781138027572
SP  - 1169
EP  - 1173
PB  - CRC Press
CY  - Leiden
ER  - 
TY  - JOUR
A1  - Fischer, Felix
A1  - Selver, M. Alper
A1  - Gezer, Sinem
A1  - Dicle, Oguz
A1  - Hillen, Walter
T1  - Systematic Parameterization, Storage, and Representation of Volumetric DICOM Data
JF  - Journal of Medical and Biological Engineering
Y1  - 2015
U6  - https://doi.org/10.1007/s40846-015-0097-5
SN  - 2199-4757
VL  - 35
IS  - 6
SP  - 709
EP  - 723
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Horikawa, Atsushi
A1  - Kazari, Masahide
A1  - Okada, Kunio
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Kusterer, Karsten
A1  - Haji Ayed, Anis
T1  - Developments of Hydrogen Dry Low Emission Combustion Technology
T2  - Annual Congress of Gas Turbine Society Japan, 2015
Y1  - 2015
N1  - Abstract in engl.; Text in japanisch
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Wireless systems for machinery safety : Requirements and solutions for wireless real time systems
T2  - 16th International Conference on Research and Education in Mechatronics (REM), 2015
Y1  - 2015
SN  - 978-3-945728-01-7
U6  - https://doi.org/10.1109/REM.2015.7380377
SP  - 88
EP  - 91
ER  - 
TY  - CHAP
A1  - Taddei, Francesca
A1  - Lozana, Lara
A1  - Michel, Philipp
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
ED  - Papadrakakis, Manolis
ED  - Papadrakakis, M.
ED  - Papadopoulos, V.
ED  - Plevris, V.
T1  - Practical recommendations for the foundation design of onshore wind turbines including soil-structure interaction
T2  - 5th International Conference on Computational Methods in Structural , Hersonissos, Greece Dynamics and Earthquake Engineering, COMPDYN 2015, 25.05.2015-27.05.2015, Hersonissos, Greece.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Busse, Daniel
A1  - Esch, Thomas
A1  - Muntaniol, Roman
T1  - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments
T2  - E-Mobility in Europe : trends and good practice
N2  - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station.
KW  - Carsharing
KW  - Thermal management
KW  - Thermal comfort
KW  - Electrical vehicle
KW  - Passenger compartment
Y1  - 2015
SN  - 978-3-319-13193-1
U6  - https://doi.org/10.1007/978-3-319-13194-8_18
SP  - 327
EP  - 343
PB  - Springer
CY  - Cham [u.a.]
ER  - 
TY  - JOUR
A1  - Grundmann, Jan Thimo
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Kahle, Ralph
A1  - Koch, Aaron Dexter
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Quantius, Dominik
A1  - Ulamec, Stephan
T1  - Spacecraft for Hypervelocity Impact Research – An Overview of Capabilities, Constraints and the Challenges of Getting There
JF  - Procedia Engineering
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.04.021
SN  - 1877-7058
N1  - Proceedings of the 2015 Hypervelocity Impact Symposium (HVIS 2015)
VL  - Vol. 103
SP  - 151
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Lange, Caroline
A1  - Dachwald, Bernd
A1  - Grimm, Christian
A1  - Koch, Aaron
A1  - Ulamec, Stephan
T1  - Small Spacecraft in Planetary Defence Related Applications–Capabilities, Constraints, Challenges
T2  - IEEE Aerospace Conference
N2  - In this paper we present an overview of the characteristics and peculiarities of small spacecraft missions related to planetary defence applications. We provide a brief overview of small spacecraft missions to small solar system bodies. On this background we present recent missions and selected projects and related studies at the German Aerospace Center, DLR, that contribute to planetary defence related activities. These range from Earth orbit technology demonstrators to active science missions in interplanetary space. We provide a summary of experience from recently flown missions with DLR participation as well as a number of studies. These include PHILAE, the lander recently arrived on comet 67P/Churyumov-Gerasimenko aboard ESA’s ROSETTA comet rendezvous mission, and the Mobile Asteroid Surface Scout, MASCOT, now underway to near-Earth asteroid (162173) 1999 JU3 aboard the Japanese sample-return probe HAYABUSA-2. We introduce the differences between the conventional methods employed in the design, integration and testing of large spacecraft and the new approaches developed by small spacecraft projects. We expect that the practical experience that can be gained from projects on extremely
compressed timelines or with high-intensity operation phases on a newly explored small solar system body can contribute significantly to the study, preparation and realization of future planetary defence related missions. One is AIDA (Asteroid Impact & Deflection Assessment), a joint effort of ESA,JHU/APL, NASA, OCA and DLR, combining JHU/APL’s DART (Double Asteroid Redirection Test) and ESA’s AIM (Asteroid Impact Monitor) spacecraft in a mission towards
near-Eath binary asteroid (65803) Didymos.
KW  - small spacecraft
KW  - planetary defence
KW  - asteroid lander
KW  - solar sail
KW  - flotilla missions
Y1  - 2015
N1  - 2015 IEEE Aerospace Conference, 7.-13. Mar. 2015, Big Sky, Montana, USA.
SP  - 1
EP  - 18
ER  - 
TY  - JOUR
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Staat, Manfred
T1  - Computational investigation of drug action on human-induced stem cell derived cardiomyocytes
JF  - Journal of biomechanical engineering
Y1  - 2015
U6  - https://doi.org/10.1115/1.4030173
SN  - 1528-8951 (E-Journal); 0148-0731 (Print)
VL  - Vol. 137
IS  - iss. 7
SP  - 071002-1
EP  - 071002-7
PB  - ASME
CY  - New York
ER  - 
TY  - CHAP
A1  - Kronhardt, Valentina
A1  - Alexopoulos, Spiros
A1  - Reißel, Martin
A1  - Latzke, Markus
A1  - Rendon, C.
A1  - Sattler, Johannes Christoph
A1  - Herrmann, Ulf
T1  - Simulation of operational management for the Solar Thermal Test and Demonstration Power Plant Jülich using optimized control strategies of the storage system
T2  - Energy procedia
Y1  - 2015
SN  - 1876-6102
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
T1  - Uncertainty multimode failure and shakedown analysis of shells
T2  - Direct methods for limit and shakedown analysis of structures / eds. Paolo Fuschi ...
N2  - This paper presents a numerical procedure for reliability analysis of thin plates and shells with respect to plastic collapse or to inadaptation. The procedure involves a deterministic shakedown analysis for each probabilistic iteration, which is based on the upper bound approach and the use of the exact Ilyushin yield surface. Probabilistic shakedown analysis deals with uncertainties originated from the loads, material strength and thickness of the shell. Based on a direct definition of the limit state function, the calculation of the failure probability may be efficiently solved by using the First and Second Order Reliability Methods (FORM and SORM). The problem of reliability of structural systems (series systems) is handled by the application of a special technique which permits to find all the design points corresponding to all the failure modes. Studies show, in this case, that it improves considerably the FORM and SORM results.
KW  - Limit analysis
KW  - Shakedown analysis
KW  - Reliability analysis
KW  - Multimode failure
KW  - Non-linear optimization
Y1  - 2015
SN  - 978-3-319-12927-3 (print) ; 978-3-319-12928-0 (online)
U6  - https://doi.org/10.1007/978-3-319-12928-0_14
SP  - 279
EP  - 298
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Thiel, Alexander
A1  - Muffler, Kai
A1  - Tippkötter, Nils
A1  - Suck, Kirstin
A1  - Sohling, Ulrich
A1  - Hruschka, Steffen M.
A1  - Ulber, Roland
T1  - A novel integrated downstream processing approach to recover sinapic acid, phytic acid and proteins from rapeseed meal
JF  - Journal of Chemical Technology and Biotechnology
N2  - BACKGROUND
Currently, several techniques exist for the downstream processing of protein, phytic acid and sinapic acid from rapeseed and rapeseed meal, but no technique has been developed to separate all of the components in one process. In this work, two new downstream processing strategies focusing on recovering sinapic acid, phytic acid and protein from rapeseed meal were established.

RESULTS
The sinapic acid content was enhanced by a factor of 4.5 with one method and 5.1 with the other. The isolation of sinapic acid was accomplished using a zeolite-based adsorbent with high adsorptive and optimal desorption characteristics. Phytic acid was isolated using the anion-exchange resin Purolite A200®. In addition, the processes resulted in two separated protein fractions. The ratios of globulin and albumin ratio to the total protein were 59.2% and 40.1%, respectively. The steps were then combined in two different ways: (a) a ‘sequential process’ using the zeolite and A200 in batch processes; and (b) a ‘parallel process’ using only A200 in a chromatographic system to separate all of the compounds.

CONCLUSIONS
It can be concluded that isolation of all three components was possible in both processes. These could enhance the added value of current processes using rapeseed meal as a protein source. © 2015 Society of Chemical Industry
Y1  - 2015
U6  - https://doi.org/10.1002/jctb.4664
VL  - 90
IS  - 11
SP  - 1999
EP  - 2006
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Lopes, Pedro
A1  - Bung, Daniel Bernhard
A1  - Leandro, Jorge
A1  - Carvalho, Rita F.
T1  - The effect of cross-waves in physical stepped spillway models
T2  - E-proceedings of the 36th IAHR World Congress ; 28 June - 3 July, 2015, The Hague, the Netherlands
Y1  - 2015
SP  - 1
EP  - 9
ER  - 
TY  - JOUR
A1  - Oertel, Mario
A1  - Bung, Daniel Bernhard
T1  - Stability and scour development of bed material on crossbar block ramps
JF  - International journal of sediment research
N2  - Block ramps are ecologically oriented drop structures with adequate energy dissipation and partially moderate flow velocities. A special case is given with crossbar block ramps, where the upstream and downstream level difference is reduced by a series of basins. To prevent the total structure from failing, the stability of single boulders within the crossbars and the bed material in between must be guaranteed. The present paper addresses the stability of bed material and scour development for various flow regimes. Any bed material erosion may affect the stability of the crossbar boulders, which in turn can result in major damages of the ramp. Therefore new design approaches are developed to choose an appropriate bed material size and to avoid failures of crossbar block ramp structures.
Y1  - 2015
U6  - https://doi.org/10.1016/j.ijsrc.2014.12.003
SN  - 1001-6279
VL  - 30
IS  - 4
SP  - 344
EP  - 350
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
T1  - Simulating beating cardiomyocytes with electromechanical coupling
T2  - II. International Conference on Biomedical Technology : 28-30 October 2015 Hannover, Germany / T. Lenarz, P. Wriggers (Eds.)
Y1  - 2015
SP  - 1
EP  - 2
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Nguyen, N. H.
A1  - Staat, Manfred
T1  - Modeling and simulation of a growing mass by the Smoothed Finite Element Method (SFEM)
T2  - Conference proceedings of the YIC GACM 2015 : 3rd ECCOMAS Young Investigators Conference and 6th GACM Colloquium on Computational Mechanics , Aachen, Germany, 20.07.2015 - 23.07.2015  / ed.: Stefanie Elgeti ; Jaan-Willem Simon
Y1  - 2015
SP  - 1
EP  - 4
PB  - RWTH Aachen University
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - Europe and South African collaboration on the Mechatronics and Robotics systems as part of the SA Robotics Center
T2  - ICRA 2015 Developing Countries Forum
N2  - Mechatronics consist of the integration of mechanical
engineering, electronic integration and computer science/
engineering. These broad fields are essential for robotic
systems, yet it makes it difficult for the researchers to specialize
and be experts in all these fields. Collaboration between
researchers allow for the integration of experience and specialization,
to allow optimized systems. Collaboration between the
European countries and South Africa is critical, as each country
has different resources available, which the other countries
might not have. Applications with the need for approval of
any restrictions, can also be obtained easier in some countries
compared to others, thus preventing the delays of research.
Some problems that have been experienced are discussed, with
the Robotics Center of South Africa as a possible solution.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Niemueller, Tim
A1  - Lakemeyer, Gerhard
A1  - Ferrein, Alexander
ED  - Finzi, Alberto
T1  - The RoboCup Logistics League as a Benchmark for Planning in Robotics
T2  - Proceedings of the 3rd Workshop on Planning and Robotics (PlanRob-15); Jerusalem, Israel 7-8/6/2015
Y1  - 2015
SP  - 63
EP  - 68
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Voigt, Birgit
A1  - Albrecht, Dirk
A1  - Sievers, Susanne
A1  - Becher, Dörte
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Schweder, Thomas
A1  - Maurer, Karl-Heinz
A1  - Hecker, Michael
T1  - High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium
JF  - Proteomics
Y1  - 2015
U6  - https://doi.org/10.1002/pmic.201400504
SN  - 1615-9861
VL  - 15
IS  - 15
SP  - 2629
EP  - 2633
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - Decision-Theoretic Planning with Linguistic Terms in Golog
T2  - FLinAl 2015 - Fuzzy Logic in Artificial Intelligence : Proceedings of the Workshop on Fuzzy Logic in AI (FLinAI-15) co-located with the 24th International Joint Conference on Artificial Intelligence (IJCAI 2015) Buenos Aires, Argentina, July 25, 2015.
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0074-1424-4
SN  - 1613-0073
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Konstantinidis, Konstantinos
A1  - Flores Martinez, Claudio
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Dykta, Paul
A1  - Bowitz, Pascal
A1  - Rudolph, Martin
A1  - Digel, Ilya
A1  - Kowalski, Julia
A1  - Voigt, Konstantin
A1  - Förstner, Roger
T1  - A lander mission to probe subglacial water on Saturn's moon enceladus for life
JF  - Acta astronautica
Y1  - 2015
SN  - 1879-2030 (E-Journal); 0094-5765 (Print)
VL  - Vol. 106
SP  - 63
EP  - 89
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Pirovano, Laura
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Attitude and Orbital Dynamics Modeling for an Uncontrolled Solar-Sail Experiment in Low-Earth Orbit
T2  - 25th International Symposium on Spaceflight Dynamics, 2015, Munich, Germany
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Geier, Christian
A1  - Bialonski, Stephan
A1  - Elger, Christian E.
A1  - Lehnertz, Klaus
T1  - How important is the seizure onset zone for seizure dynamics?
JF  - Seizure
Y1  - 2015
U6  - https://doi.org/10.1016/j.seizure.2014.10.013
SN  - 1059-1311
VL  - 25
SP  - 160
EP  - 166
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Ferrein, Alexander
A1  - Gebhardt, Andreas
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Tedjasukmana, Osmond Sanjaya
T1  - Improving additive manufacturing by image processing and robotic milling
T2  - 2015 IEEE International Conference on Automation Science and Engineering (CASE), Aug 24-28, 2015 Gothenburg, Sweden
Y1  - 2015
U6  - https://doi.org/10.1109/CoASE.2015.7294217
SP  - 924
EP  - 929
ER  - 
TY  - PAT
A1  - Stadtmüller, Ralf
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Method for production of single-stranded macronucleotides
N2  - The invention relates to a method for production of single-stranded macronucleotides by amplifying and ligating an extended monomeric single-stranded target nucleic acid sequence (targetss) into a repetitive cluster of double-stranded target nucleic acid sequences (targetds), and subsequently cloning the construct into a vector (aptagene vector). The aptagene vector is transformed into host cells for replication of the aptagene and isolated in order to optain single-stranded target sequences (targetss). The invention also relates to single-stranded nucleic acids, produced by a method of the invention.
Y1  - 2015
N1  - Patent auch unter EP2774996, EP2774996, US2017145460 und US9944966 veröffentlicht.
ER  - 
TY  - JOUR
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Abstracting Away Low-Level Details in Service Robotics with Fuzzy Fluents
JF  - Model-Driven Knowledge Engineering for Improved Software Modularity in Robotics and Automation.
Workshop at European Robotics Forum 2015
Vienna, Austria, March 11-13, 2015.
Y1  - 2015
SP  - 1
EP  - 4
ER  - 
TY  - CHAP
A1  - Latzke, Markus
A1  - Alexopoulos, Spiros
A1  - Kronhardt, Valentina
A1  - Rendón, Carlos
A1  - Sattler, Johannes Christoph
T1  - Comparison of Potential Sites in China for Erecting a Hybrid Solar Tower Power Plant with Air Receiver
T2  - Energy Procedia
Y1  - 2015
U6  - https://doi.org/10.1016/j.egypro.2015.03.142
SN  - 1876-6102
N1  - International Conference on Concentrating Solar Power and Chemical Energy Systems, SolarPACES 2014, Beijing, China
SP  - 1327
EP  - 1334
ER  - 
TY  - CHAP
A1  - Seefeldt, Patric
A1  - Bauer, Waldemar
A1  - Dachwald, Bernd
A1  - Grundmann, Jan Thimo
A1  - Straubel, Marco
A1  - Sznajder, Maciej
A1  - Tóth, Norbert
A1  - Zander, Martin E.
T1  - Large lightweight deployable structures for planetary defence: solar sail propulsion, solar concentrator payloads, large-scale photovoltaic power
T2  - 4th IAA Planetary Defense Conference - PDC 2015, 13-17 April 2015, Frascati, Roma, Italy
Y1  - 2015
N1  - IAA-PDC-15-P-20
ER  - 
TY  - CHAP
A1  - Booysen, Tracy
A1  - Mathew, Thomas
A1  - Knox, Greig
A1  - Fong, W. K.
A1  - Stüttgen, Marcel
A1  - Ferrein, Alexander
A1  - Steinbauer, Gerald
T1  - The Scarab Project
T2  - ICRA 2015 Developing Countries Forum
N2  - Urban Search and Rescue (USAR) is an active research
field in the robotics community. Despite recent advances
for many open research questions, these kind of systems are
not widely used in real rescue missions. One reason is that such
systems are complex and not (yet) very reliable; another is that
one has to be an robotic expert to run such a system. Moreover,
available rescue robots are very expensive and the benefits of
using them are still limited.
In this paper, we present the Scarab robot, an alternative
design for a USAR robot. The robot is light weight, humanpackable
and its primary purpose is that of extending the
rescuer’s capability to sense the disaster site. The idea is that a
responder throws the robot to a certain spot. The robot survives
the impact with the ground and relays sensor data such as
camera images or thermal images to the responder’s hand-held
control unit from which the robot can be remotely controlled.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
T1  - A Local Planner for Ackermann-Driven Vehicles in ROS SBPL
T2  - Proceedings of the International Conference on Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech), 2015
Y1  - 2015
U6  - https://doi.org/10.1109/RoboMech.2015.7359518
SP  - 172
EP  - 177
ER  - 
TY  - THES
A1  - Schusser, Sebastian
T1  - Sensor-based degradation monitoring for the evaluation of (bio)degradable polymers
Y1  - 2015
N1  - Universiteit Hasselt, FH Aachen, Dissertation, 2015;

Printausgabe in der Bibliothek vorhanden: 61 UWJ 5
PB  - Universiteit Hasselt ; FH Aachen
CY  - Hasselt ; Aachen
ER  - 
TY  - JOUR
A1  - Yang, Peng-Fei
A1  - Kriechbaumer, Andreas
A1  - Albracht, Kirsten
A1  - Sanno, Maximilian
A1  - Ganse, Bergita
A1  - Koy, Timmo
A1  - Shang, Peng
A1  - Brüggemann, Gert-Peter
A1  - Müller, Lars Peter
A1  - Rittweger, Jörn
T1  - On the relationship between tibia torsional deformation and regional muscle contractions in habitual human exercises in vivo
JF  - Journal of Biomechanics
Y1  - 2015
U6  - https://doi.org/10.1016/j.jbiomech.2014.12.031
SN  - 0021-9290
VL  - 48
IS  - 3
SP  - 456
EP  - 464
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Seynnes, O. R.
A1  - Bojsen-Moller, J.
A1  - Albracht, Kirsten
A1  - Arndt, A.
A1  - Cronin, N. J.
A1  - Finni, T.
A1  - Magnusson, S. P.
T1  - Ultrasound-based testing of tendon mechanical properties: a critical evaluation
JF  - Journal of Applied Physiology
Y1  - 2015
U6  - https://doi.org/10.1152/japplphysiol.00849.2014
SN  - 8750-7587
VL  - 118
IS  - 2
SP  - 133
EP  - 141
ER  - 
TY  - CHAP
A1  - Pricking, Sebastian
A1  - Gebs, Raphael
A1  - Fleischhaker, Robert
A1  - Kleinbauer, Jochen
A1  - Budnicki, Aleksander
A1  - Sutter, Dirk
A1  - Killi, Alexander
A1  - Weiler, Sascha
A1  - Mielke, M.
A1  - Beaudou, B.
A1  - Debord, B.
A1  - Gerome, F.
A1  - Benabid, F.
ED  - Dorsch, Friedhelm
T1  - Hollow core fiber delivery of sub-ps pulses from a TruMicro 5000 Femto edition thin disk amplifier
T2  - High-power laser materials processing: Lasers, beam delivery, diagnostics, and applications IV : 7 Februar 2015, San Francisco, USA. - (SPIE proceedings series ; 9356)
Y1  - 2015
SN  - 978-162841446-2
U6  - https://doi.org/10.1117/12.2079289
SN  - 0277-786X
SP  - 935602
PB  - SPIE, International Society for Optical Engineering
ER  - 
TY  - CHAP
A1  - Wolf, C. Roland
A1  - Kapelyukh, Yury
A1  - Scheer, Nico
A1  - Henderson, Colin J.
ED  - Wilson, Alan G. E.
T1  - Application of Humanised and Other Transgenic Models to Predict Human Responses to Drugs
N2  - The use of transgenic animal models has transformed our knowledge of complex biochemical pathways in vivo. It has allowed disease processes to be modelled and used in the development of new disease prevention and treatment strategies. They can also be used to define cell- and tissue-specific pathways of gene regulation. A further major application is in the area of preclinical development where such models can be used to define pathways of chemical toxicity, and the pathways that regulate drug disposition. One major application of this approach is the humanisation of mice for the proteins that control drug metabolism and disposition. Such models can have numerous applications in the development of drugs and in their more sophisticated use in the clinic.
Y1  - 2015
SN  - 978-1-78262-778-4
U6  - https://doi.org/10.1039/9781782622376-00152
SP  - 152
EP  - 176
PB  - RSC Publ.
CY  - Cambridge
ER  -