TY  - CHAP
A1  - Kowalski, Julia
A1  - McArdell, B. W.
A1  - Bartelt, Perry
T1  - A comparison of two approaches to modeling multiphase gravity currents
T2  - Geophysical Research Abstracts
Y1  - 2006
N1  - A-08738
VL  - 8
ER  - 
TY  - CHAP
A1  - Rabner, Arthur
A1  - Shacham, Yosi
T1  - A concept for a sensitive micro total analysis system for high throughput fluorescence imaging
N2  - This paper discusses possible methods for on-chip fluorescent imaging for integrated bio-sensors. The integration of optical and electro-optical accessories, according to suggested methods, can improve the performance of fluorescence imaging. It can boost the signal to background ratio by a few orders of magnitudes in comparison to conventional discrete setups. The methods that are present in this paper are oriented towards building reproducible arrays for high-throughput micro total analysis systems (µTAS). The first method relates to side illumination of the fluorescent material placed into microcompartments of the lab-on-chip. Its significance is in high utilization of excitation energy for low concentration of fluorescent material. The utilization of a transparent µLED chip, for the second method, allows the placement of the excitation light sources on the same optical axis with emission detector, such that the excitation and emission rays are directed controversly. The third method presents a spatial filtering of the excitation background.
KW  - Biosensor
KW  - Fluorescence
KW  - imaging
KW  - lab-on-chip
KW  - fluidic
KW  - lenslet array
KW  - LED chip
KW  - image sensor
KW  - biosensor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1456
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Wagner, Torsten
A1  - Näther, Niko
A1  - Rolka, David
A1  - Yoshinobu, Tatsuo
A1  - Kloock, Joachim P.
A1  - Turek, Monika
A1  - Ingebrandt, Sven
A1  - Poghossian, Arshak
T1  - A semiconductor-based field-effect platform for (bio-)chemical and physical sensors: From capacitive EIS sensors and LAPS over ISFETs to nano-scale devices
T2  - MRS Proceedings
Y1  - 2006
U6  - http://dx.doi.org/10.1557/PROC-0952-F08-02
N1  - Vol. 952 - Symposium F - Integrated Nanosensors
SP  - 1
EP  - 9
ER  - 
TY  - CHAP
T1  - Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006
N2  - "Mit dem "1. Erfahrungsaustausch" im Fachbereich Bauingenieurwesen berichten Absolventen des Fachbereichs aus der Praxis. Mit diesem Treffen wird die wichtige Verbindung zwischen Hochschule, ihren Absolventen und der Berufspraxis zum besonderen Anliegen gemacht und besonders gestärkt." Zitat Prof. Dr.- Ing. Hans Boegershausen, Dekan im Grußwort. Referenten und Themen: Wellmann, Judith: Perspektiven eines Bauingenieurs im konstruktiven Ingenieurbau Dirk Gobbele, Dirk: Planung der Umbaumaßnahme Hauptbahnhof Aachen Kretschmann, Lars: Planung und Bauleitung Buschtunnel Aachen Becker, Astrid: Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit Plenz, Michael: Baurevision und Unternehmensberatung, Tätigkeit als öffentlich bestellter und vereidigter Sachverständiger Klöcker, Alexander: Das Leitungsbauunternehmen – Unternehmerische Strategie als Zukunftssicherung Türk, Roman: Sanierung von Hausanschlüssen Bornebusch, Michael: Hydraulische und Hydrologische Modellsimulationen als Planungswerkzeug für Hochwasser-Schutz-Maßnahmen Himmerich, Jörg : Pipeline Integrity Management System – Probabilistische Bewertung von Bauwerken am Beispiel von Hochdruckleitungen.
KW  - Aachen / Fachhochschule Aachen / Fachbereich Bauingenieurwesen
KW  - Alfha.net
KW  - Alumni
KW  - Absolvententreffen
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
A1  - Schiffer, Stefan
T1  - AllemaniACs@ home 2006 team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Vedral, A.
A1  - Wollert, Jörg
T1  - Analysis of error and time behavior of the IEEE 802.15.4 PHY-layer in an industrial environment
T2  - Proceedings / 2006 IEEE International Workshop on Factory Communication Systems : June 28th - 30th, 2006
Y1  - 2006
SN  - 1-4244-0379-0
SP  - 119
EP  - 124
PB  - IEEE Operations Center
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Becker, Astrid
T1  - Anlagenmanagement und Aufgaben der DB Netz AG, Bauherrenvertretung und Wirtschaftlichkeit
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 18 Übersicht des Vortrags
KW  - Anlagenwirtschaft
KW  - Bauherrenvertretung
KW  - Deutsche Bahn Netz AG
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Pietsch, Wolfram
A1  - Herzwurm, Georg
A1  - Zander, Dietmar
T1  - Assuring quality of QFD-education in Germany
T2  - ISQFD'06: 12th International Symposium on QFD : Tokyo, 07.-09.2006
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Renault, Philippe
A1  - Butenweg, Christoph
A1  - Meskouris, Konstantin
T1  - Baudynamische Untersuchung von Brückenbauwerken im Kölner Raum
T2  - Baudynamik : Tagung Kassel, 17. und 18. Mai 2006 / VDI-Gesellschaft Entwicklung, Konstruktion, Vertrieb. (VDI-Berichte ; 1941)
Y1  - 2006
SN  - 3-18-091941-8
SP  - 121
EP  - 140
PB  - VDI-Verlag
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Plenz, Michael
T1  - Baurevision und Unternehmensberatung, Tätigkeit als öffentlich bestellter und vereidigter Sachverständiger
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 19-20. Zusammenfassung des Vortrags: Prozessanalyse und Revision beim Umbau des Flughafens Hamburg, Beratung von Bauunternehmen, Sachverständigentätigkeit
KW  - Öffentlich bestellter Sachverständiger
KW  - Baurevision
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Lei, Yu
A1  - Mulchandani, Priti
A1  - Chen, Wilfred
A1  - Mulchandani, Ashok
T1  - Biosensor for direct determination of fenitrothion and EPN using recombinant Pseudomonas putida JS444 with surface expressed organophosphorus hydrolase. 1. modified clark oxygen electrode
N2  - This paper reports a first microbial biosensor for rapid and cost-effective determination of organophosphorus pesticides fenitrothion and EPN. The biosensor consisted of recombinant PNP-degrading/oxidizing bacteria Pseudomonas putida JS444 anchoring and displaying organophosphorus hydrolase (OPH) on its cell surface as biological sensing element and a dissolved oxygen electrode as the transducer. Surfaceexpressed OPH catalyzed the hydrolysis of fenitrothion and EPN to release 3-methyl-4-nitrophenol and p-nitrophenol, respectively, which were oxidized by the enzymatic machinery of Pseudomonas putida JS444 to carbon dioxide while consuming oxygen, which was measured and correlated to the concentration of organophosphates. Under the optimum operating conditions, the biosensor was able to measure as low as 277 ppb of fenitrothion and 1.6 ppm of EPN without interference from phenolic compounds and other commonly used pesticides such as carbamate pesticides, triazine herbicides and organophosphate pesticides without nitrophenyl substituent. The applicability of the biosensor to lake water was also demonstrated.
KW  - Biosensor
KW  - Organophosphorus
KW  - fenitrothion
KW  - EPN
KW  - biosensor
KW  - Pseudomonas putida
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1573
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Como motivar a si mesmo e aos outros - o valor dos 16 Motivos Vitais para Liderança
N2  - O Perfil Reiss apresenta no resultado uma visão da estrutura dos motivos e impulsos de uma pessoa. O ponto de saída para a análise do resultado é o conhecimento de que os motivos vitais (= valores e metas de sobrevivência) formam a moldura, na qual as competências e capacidades que uma pessoa possui possam se desabrochar de forma ideal. A partir desse princípio, não existe no Perfil Reiss nenhum resultado que se possa classificar como correto ou falso, nem como bom ou mau. Uma comparação entre o resultado do Perfil Reiss e o conteúdo de uma atividade apresentada ou ambicionada dá informação sobre até que ponto a capacidade de rendimento de uma pessoa nessa posição pode vir ou virá a se desenvolver por um longo tempo.
N2  - Das Reiss-Profil der 16 Lebensmotive ist Ergebnis einer umfassenden, länderübergreifenden empirischen Datenerhebung und beruht auf einer bislang einzigartigen empirischen Forschungsbasis. Es überprüft die Kongruenz zwischen dem Anforderungsprofil eines Stelle und dem Motivationsprofil eines Menschen. Das Reiss-Profil lässt bewusste und unbewusste Motive und Antriebe von Mitarbeitern erkennen, die neue Management-Firmeninitiativen blockieren oder fördern können. Bereits im Vorfeld werden für den einzelnen Mitarbeiter außerordentlich wichtige Werte anhand ihres Motivprofils erkannt und können besser in die Gruppe integriert werden. Im Endergebnis verdeutlicht diese Perspektive für die betriebliche Mitarbeitermotivation eine vollkommene Individualisierung, wenngleich das Ausmaß auch kulturabhängig relativiert werden muß.
T2  - How to motivate yourself and other people - the value of the 16 basic desires for leadership
KW  - Führung
KW  - Motivation
KW  - Führung
KW  - Motivation
KW  - Leadership
KW  - Motivation
KW  - Self-Leadership
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - CHAP
A1  - Klöcker, Alexander
T1  - Das Leitungsbauunternehmen - unternehmerische Strategie als Zukunftssicherung
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 21-22 Zusammenfassung des Vortrags
KW  - Leitungsbau
KW  - Leitungsbauunternehmen
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Näther, Niko
A1  - Juárez, Leon M.
A1  - Emmerich, Rüdiger
A1  - Berger, Jörg
A1  - Friedrich, Peter
A1  - Schöning, Michael Josef
T1  - Detection of hydrogen peroxide (H2O2) at exposed temperatures for industrial processes
N2  - An H2O2 sensor for the application in industrial sterilisation processes has been developed. Therefore, automated sterilisation equipment at laboratory scale has been constructed using parts from industrial sterilisation facilities. In addition, a software tool has been developed for the control of the sterilisation equipment at laboratory scale. First measurements with the developed sensor set-up as part of the sterilisation equipment have been performed and the sensor has been physically characterised by optical microscopy and SEM.
KW  - Biosensor
KW  - Gas sensor
KW  - hydrogen peroxide
KW  - sterilisation
KW  - catalytic decomposition
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1418
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Developing competitive broadband markets: Lessons learnt from German and European regulatory approaches on broad-band access
N2  - A key feature of future broadband markets will be diversity of access technologies, meaning that numerous technologies will be exploited for broadband communication. Various factors will affect the success of these future broadband markets, the regulatory policy being one amongst others. So far, a coherent regulatory approach does not exist as to broadband markets. First results of policies so far suggest that less sector-specific regulation is likely to occur. Instead, regulators must ensure that access to networks and services of potentially dominant providers in a relevant broadband market will satisfy requirements for openness and non-discrimination. In this environment the future challenge of regulationg broadband markets will be to set the right incentives for investment into new infrastructures. This paper examines whether there is a need for the regulation of future broadband access markets an if yes, what is the appropriate regulatory tool to do so. Thereby the focus is on the analysis of European broadband markets and the regulatory approaches applied. The first section provides a description of the characteristics of future broadband markets. The second section discusses possible bottlenecks on broadband markets an their regulatory implications. The third section will examine regulatory issues concerning access to broadband networks in more detail. This will be done by comparing the regulatory approaches of European countries and the results in terms of bradband penetration. The final section will give key recommendations for a regulatory strategy on brandband access markets.
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2006
N1  - paper presented at 16th Biennial conference of the International Telecommunications Society. Information Communication Technology: Opportunities and Challenges for Telecommunications. June 12-16, 2006 Beijing, China.
ER  - 
TY  - CHAP
A1  - Hoffschmidt, Bernhard
A1  - Schwarzer, Klemens
A1  - Späte, Frank
A1  - Kötter, Jens
A1  - Ebert, Miriam
A1  - Sierck, Olaf
T1  - Development of a small modular parabolic trough collector
T2  - 13th International Symposium Concentrated Solar Power and Chemical Energy Technologies : SolarPaces : June 20 - 23, 2006, Seville, Spain
Y1  - 2006
SN  - 8478345191
PB  - SolarPaces
CY  - [o.O.]
ER  - 
TY  - CHAP
A1  - Vedral, Andreas
A1  - Wollert, Jörg
T1  - Die Analyse industrieller funkgestützter Kommunikationskanäle
T2  - Elektrische Automatisierung - Systeme und Komponenten : SPS/IPC/Drives 2006, Fachmesse & Kongress, 28. - 30. Nov. 2006, Nürnberg
Y1  - 2006
SN  - 9783800729944
SP  - 279
EP  - 288
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Korsch, Helge
A1  - Dafnis, Athanasios
A1  - Reimerdes, Hans-Günther
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Dynamic qualification of the HIRENASD elastic wing model
T2  - Motto: Luft- und Raumfahrt: Lehre, Forschung, Industrie - gemeinsam innovativ. Deutscher Luft- und Raumfahrtkongress 2006 : Braunschweig, 06. bis 09. November 2006. Jahrbuch / Deutsche Gesellschaft für Luft- und Raumfahrt. 2006
Y1  - 2006
SP  - 1441
EP  - 1450
PB  - Dt. Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth (DGLR)
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Moreno, Lia
A1  - Dosev, D.
A1  - Bratov, A.
A1  - Dominguez, C.
A1  - Schöning, Michael Josef
A1  - Kloock, Joachim P.
T1  - Effect of electrical properties of the surrounding medium on the response of an interdigitated electrode array with chalcogenide glass film
T2  - XX Eurosensors : 20th anniversary ; Göteborg, Sweden, 17 - 20 September 2006 ; [proceedings]. - Vol. 1
Y1  - 2006
SN  - 978-91-631-9280-7
N1  - Paper number: T1A-P22
SP  - 384
EP  - 385
CY  - Göteborg
ER  - 
TY  - CHAP
A1  - Müller, Karsten
A1  - Fischer, Benedikt
A1  - Lehmann, Thomas
T1  - Einsatzmöglichkeiten von Bilderkennungsverfahren zur Zustandserfassung von Kanalisationen
T2  - 7. Kölner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, Köln / hrsg. von J. Pinnekamp. Aachener Schriften zur Stadtentwässerung. Bd. 9
Y1  - 2006
SN  - 3-938996-02-1
SP  - 16/1
EP  - 16/18
PB  - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Förster, Arnold
A1  - Stock, Jürgen
A1  - Montanari, Simone
A1  - Lepsa, Mihail Ion
A1  - Lüth, Hans
T1  - Fabrication and characterisation of GaAs Gunn Diode Chips for applications at 77 GHz in automotive industry
N2  - GaAs-based Gunn diodes with graded AlGaAs hot electron injector heterostructures have been developed under the special needs in automotive applications. The fabrication of the Gunn diode chips was based on total substrate removal and processing of integrated Au heat sinks. Especially, the thermal and RF behavior of the diodes have been analyzed by DC, impedance and S-parameter measurements. The electrical investigations have revealed the functionality of the hot electron injector. An optimized layer structure could fulfill the requirements in adaptive cruise control (ACC) systems at 77 GHz with typical output power between 50 and 90 mW.
KW  - Biosensor
KW  - Gunn diode
KW  - microwave generation
KW  - GaAs hot electron injector
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1462
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Ingebrandt, S.
A1  - Platen, J.
A1  - Schöning, Michael Josef
T1  - Field-effect sensors with charged macromolecules – from micro towards nano aspects
T2  - Biochemical Sensing Utilisation of Micro-and                       Nanotechnologies, Warschau, Nov. 2005 : Lecture Notes of the                       ICB Seminar / ed.: M. Mascini, W. Torbicz
Y1  - 2006
SP  - 74
EP  - 81
PB  - Polish Academy Sciences Press
CY  - Warsaw
ER  - 
TY  - CHAP
A1  - Blaß, Hans Joachim
A1  - Uibel, Thomas
ED  - Moosbrugger, Thomas
T1  - Forschung an der Universität Karlsruhe - Stiftförmige Verbindungsmittel in Brettsperrholz
T2  - Brettsperrholz : ein Blick auf Forschung und Entwicklung ; 5. Grazer Holzbau-Fachtagung ; 5. GraHFT' 06; Tagungsband ; Graz, am 29. September 2006 / Institut für Holzbau und Holztechnologie ... [Tagungsband: Thomas Moosbrugger ...]
Y1  - 2006
SN  - 3-902020-32-6
N1  - Grazer Holzbau-Fachtagung ; (5 ; 2006.09.29 ; Graz); Institut für Holzbau und Holztechnologie
SP  - I-6
EP  - I-16
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schumacher, Kerstin
A1  - Kloock, Joachim P.
A1  - Rosenkranz, Christian
A1  - Schultze, Joachim W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell
N2  - A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors.
KW  - Biosensor
KW  - Biosensorik
KW  - ISFET
KW  - Wafer
KW  - ISFET
KW  - wafer-level testing
KW  - capillary micro-droplet cell
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1259
ER  - 
TY  - CHAP
A1  - Fend, Thomas
A1  - Hoffschmidt, Bernhard
A1  - Reutter, Oliver
A1  - Sauerhering, Jörg
A1  - Pitz-Paal, Robert
T1  - Gas flow in hot porous materials: the solar air receiver and spin-off applications
T2  - Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland
Y1  - 2006
SN  - 0-7918-4760-8
SP  - 507
EP  - 514
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Wagner, Thorsten
A1  - Kohl, Claus-Dieter
A1  - Fröba, Michael
A1  - Tiemann, Michael
T1  - Gas sensing properties of ordered mesoporous SnO2
N2  - We report on the synthesis and CO gas-sensing properties of mesoporous tin(IV) oxides (SnO2). For the synthesis cetyltrimethylammonium bromide (CTABr) was used as a structure-directing agent; the resulting SnO2 powders were applied as films to commercially available sensor substrates by drop coating. Nitrogen physisorption shows specific surface areas up to 160 m2·g-1 and mean pore diameters of about 4 nm, as verified by TEM. The film conductance was measured in dependence on the CO concentration in humid synthetic air at a constant temperature of 300 °C. The sensors show a high sensitivity at low CO concentrations and turn out to be largely insensitive towards changes in the relative humidity. We compare the materials with commercially available SnO2-based sensors.
KW  - Biosensor
KW  - Tin oxide
KW  - sensing properties
KW  - CO
KW  - humidity
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1422
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Graph Transformations for Dynamic Knowledge Processing
N2  - In: Proceedings of the 39th Annual Hawaii International Conference on System Sciences, 2006. HICSS '06 http://dx.doi.org/10.1109/HICSS.2006.200 The conceptual design phase at the beginning of the building construction process is not adequately supported by any CAD-tool. Conceptual design support needs regarding two aspects: first, the architect must be able to develop conceptual sketches that provide abstraction from constructive details. Second, conceptually relevant knowledge should be available to check these conceptual sketches. The paper deals with knowledge to formalize for conceptual design. To enable domain experts formalizing knowledge, a graph-based specification is presented that allows the development of a domain ontology and design rules specific for one class of buildings at runtime. The provided tool support illustrates the introduced concepts and demonstrates the consistency analysis between knowledge and conceptual design.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Grundlagen Wireless - Was kann von Funktechnik erwartet werden?
T2  - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund / Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1  - 2006
SN  - 3-18-377210-8
SP  - 314
EP  - 323
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Kreutz, Christian
A1  - Lörgen, Jürgen
A1  - Graewe, Boris
A1  - Bargon, Joachim
A1  - Yoshida, Mayumi
A1  - Freso, Zachary M.
A1  - Frèchet, Jean M. J.
T1  - High frequency quartz micro balances: a promising path to enhanced sensitivity of gravimetric sensors
N2  - An array of 50 MHz quartz microbalances (QMBs) coated with a dendronized polymer was used to detect small amounts of volatile organic compounds (VOCs) in the gas phase. The results were compared to those obtained with the commonly used 10 MHz QMBs. The 50 MHz QMBs proved to be a powerful tool for the detection of VOCs in the gas phase; therefore, they represent a promising alternative to the much more delicate surface acoustic wave devices (SAWs).
KW  - Biosensor
KW  - Quartz micro balances
KW  - electronic noses dendronized polymers inverted mesa technology
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1445
ER  - 
TY  - CHAP
A1  - Spannhake, Jan
A1  - Schulz, Olaf
A1  - Helwig, Andreas
A1  - Krenkow, Angelika
A1  - Müller, Gerhard
A1  - Doll, Theodor
T1  - High-temperature MEMS heater platforms: long-term performance of metal and semiconductor heater materials
N2  - Micromachined thermal heater platforms offer low electrical power consumption and high modulation speed, i.e. properties which are advantageous for realizing nondispersive infrared (NDIR) gas- and liquid monitoring systems. In this paper, we report on investigations on silicon-on-insulator (SOI) based infrared (IR) emitter devices heated by employing different kinds of metallic and semiconductor heater materials. Our results clearly reveal the superior high-temperature performance of semiconductor over metallic heater materials. Long-term stable emitter operation in the vicinity of 1300 K could be attained using heavily antimony-doped tin dioxide (SnO2:Sb) heater elements.
KW  - Biosensor
KW  - Hotplate
KW  - heater metallisation
KW  - high-temperature stability
KW  - electro-migration
KW  - doped silicon
KW  - doped metal oxide
KW  - antimony doped tin oxide
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1513
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Bührig-Polaczek, Andreas
A1  - Röth, Thilo
A1  - Baumeister, E.
A1  - Nowack, N.
A1  - Süßmann, Torsten
T1  - Hybride Leichtbaustrukturen in Stahlblech-Leichtmetall Verbundguss
N2  - Stahl-Leichtmetall-Hybride mit hohen Leistungspotentialen können heute wirtschaftlich abgebildet werden und eignen sich möglicherweise auch zum Einsatz in Fahrzeugkarosserien
KW  - Karosseriebau
KW  - Verbundguss
KW  - Stahlblech-Leichtmetall Verbundguss
KW  - Stahlblech-Leichtmetall-Hybride
KW  - Lightweight car body construction
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Bornebusch, Michael
T1  - Hydraulische und hydrologische Modellsimulation als Planungswerkzeug für Hochwasser-Schutz-Massnahmen
N2  - In: Alfha.net / Sektion Bauingenieurwesen: 1. [Erster] Erfahrungsaustausch : Absolventen des Fachbereichs Bauingenieurwesens berichten. 13. Oktober 2006. S. 25-27. Zusammenfassung des Vortrags.
KW  - Hochwasserschutz
KW  - Niederschlag-Abfluss-Modelle
KW  - N-A-Modelle
KW  - Gewässerausbau
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Böhm, Stefan
A1  - Dilger, Klaus
T1  - Implementation of a velocity controlled manual applicator for adhesives and sealants in the automotive industry in consideration of quality control
T2  - Proceedings of the 29th annual meeting of the Adhesion Society : 19. - 22.2.2006, Jacksonville, Florida
Y1  - 2006
SN  - 1086-9506
SP  - 68
EP  - 70
PB  - Adhesion Society
CY  - Blacksburg, Va.
ER  - 
TY  - CHAP
A1  - Huth, Thomas
A1  - Elsen, Olaf
A1  - Hartwig, Christoph
A1  - Esch, Thomas
T1  - Innovative modular valve trains for 2015 - logistic benefits by EMVT
T2  - IFAC Proceedings Volumes, Volume 39, Issue 3
N2  - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary.
Y1  - 2006
U6  - http://dx.doi.org/10.3182/20060517-3-FR-2903.00172
N1  - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing"
SP  - 315
EP  - 320
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Drumm, Christian
A1  - Lemcke, Jens
A1  - Oberle, Daniel
T1  - Integrating Semantic Web Services and Business Process Management: A Real Use Case
T2  - Proceedings of the ESWC 2006 Workshop Semantics for Business Process Management 2006 (SBPM 2006), June 2006
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Pinnekamp, Johannes
A1  - Müller, Karsten
T1  - Kanalisation und Gewässerschutz
T2  - 7. Kölner Kanal Kolloquium : 06. und 07. September 2006 im Maternushaus, Köln / hrsg. von Johannes Pinnekamp. Aachener Schriften zur Stadtentwässerung. Bd. 9
Y1  - 2006
SN  - 3-938996-02-1
SP  - 1/1
EP  - 1/16
PB  - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Wollert, Jörg
T1  - Langzeitstatistische Untersuchungen zur Qualität von Funkkanälen für das industrielle Umfeld
T2  - Wireless technologies : von der Technologie zur Anwendung : 8. Kongress, 27. - 28. September 2006, Dortmund ( Jörg Wollert (Hrsg.) (Fortschritt-Berichte VDI : Reihe 10, Informatik, Kommunikation ; Nr. 772)
Y1  - 2006
SN  - 3-18-377210-8
SP  - 165
EP  - 176
PB  - VDI-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wagner, Torsten
A1  - Yoshinobu, T.
A1  - Otto, R.
A1  - Rao, C.
A1  - Molina, R.
A1  - Schöning, Michael Josef
T1  - Licht-adressierbare potentiometrische Sensorsysteme – Konzepte und Anwendungen
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 165
EP  - 168
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - Load Carrying Capacity of Joints with Dowel Type Fasteners in Solid Wood Panels
T2  - Proceedings. CIB-W18 Meeting 2006, Florence, Italy 2006
Y1  - 2006
SN  - 0945-6996
N1  - Paper 39-7-5
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Böhm, Stefan
A1  - Hellmanns, Mark
A1  - Backes, Andreas
A1  - Dilger, Klaus
T1  - Lock-in thermography based NDT of automotive parts
T2  - Proceedings of the 3rd World Congress on Adhesion and Related Phenomena : WCARP-III, October 15 -18, 2006, Beijing, China
Y1  - 2006
SP  - 382
EP  - 384
PB  - Beijing Adhesion Society of China
CY  - Beijing
ER  - 
TY  - CHAP
A1  - Katz, Eugenii
A1  - Willner, Itamar
T1  - Magneto-controlled quantized electron transfer to surface-confined redox units and metal nanoparticles
N2  - Hydrophobic magnetic nanoparticles (NPs) consisting of undecanoate-capped magnetite (Fe3O4, average diameter ca. 5 nm) are used to control quantized electron transfer to surface-confined redox units and metal NPs. A two-phase system consisting of an aqueous electrolyte solution and a toluene phase that includes the suspended undecanoatecapped magnetic NPs is used to control the interfacial properties of the electrode surface. The attracted magnetic NPs form a hydrophobic layer on the electrode surface resulting in the change of the mechanisms of the surface-confined electrochemical processes. A quinone-monolayer modified Au electrode demonstrates an aqueous-type of the electrochemical process (2e-+2H+ redox mechanism) for the quinone units in the absence of the hydrophobic magnetic NPs, while the attraction of the magnetic NPs to the surface results in the stepwise single-electron transfer mechanism characteristic of a dry nonaqueous medium. Also, the attraction of the hydrophobic magnetic NPs to the Au electrode surface modified with Au NPs (ca. 1.4 nm) yields a microenvironment with a low dielectric constant that results in the single-electron quantum charging of the Au NPs.
KW  - Biosensor
KW  - Nanoparticles
KW  - magnetic particles
KW  - quantum charging
KW  - modified electrode
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1528
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abouzar, Maryam H.
A1  - Han, Y.
A1  - Ingebrandt, S.
A1  - Offenhäusser, A.
A1  - Poghossian, Arshak
T1  - Markierungsfreie DNA-Detektion mit Silizium-Feldeffektsensoren – Messeffekte oder Artefakte?
T2  - Sensoren und Mess-Systeme 2006 : Vorträge der 13. ITG/GMA-Fachtagung vom 13. bis 14.3.2006 in Freiburg/Breisgau
Y1  - 2006
SN  - 3-8007-2939-3
SP  - 443
EP  - 446
PB  - VDE Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Baronas, Romas
A1  - Ivanauskas, Feliksas
A1  - Kulys, Juozas
T1  - Mathematical modeling of biosensors based on an array of enzyme microreactors
N2  - This paper presents a two-dimensional-in-space mathematical model of biosensors based on an array of enzyme microreactors immobilised on a single electrode. The modeling system acts under amperometric conditions. The microreactors were modeled by particles and by strips. The model is based on the diffusion equations containing a nonlinear term related to the Michaelis-Menten kinetics of the enzymatic reaction. The model involves three regions: an array of enzyme microreactors where enzyme reaction as well as mass transport by diffusion takes place, a diffusion limiting region where only the diffusion takes place, and a convective region, where the analyte concentration is maintained constant. Using computer simulation, the influence of the geometry of the microreactors and of the diffusion region on the biosensor response was investigated. The digital simulation was carried out using the finite difference technique.
KW  - Biosensor
KW  - Reaction-diffusion
KW  - modeling biosensor
KW  - microreactor
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1569
ER  - 
TY  - CHAP
A1  - Meskouris, Konstantin
A1  - Mistler, Michael
A1  - Butenweg, Christoph
T1  - Mauerwerksbauten unter Erdbebenbelastung
T2  - Numerische Methoden zur Problemlösung im konstruktiven Bauwesen : 34. Aachener Baustofftag ; 02. Februar 2006
Y1  - 2006
PB  - IBAC
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Platen, Johannes
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique
N2  - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures.
KW  - Biosensor
KW  - Nanostructuring
KW  - layer expansion
KW  - pattern-size reduction
KW  - self-aligned patterning
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477
ER  -