TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Virtual welding equipment for simulation of GMAW processes with integration of power source regulation
JF  - Frontiers of materials science
Y1  - 2011
SN  - 2095-0268 (E-Journal); 2095-025X (Print)
VL  - Vol. 5
IS  - Iss. 2
SP  - 79
EP  - 89
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Propawe, Reinhart
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative approach of joining hybrid components
JF  - Journal of laser applications
Y1  - 2011
SN  - 1042-346X
VL  - Vol. 23
IS  - Iss. 3
SP  - 32007
PB  - Laser Institute of America
CY  - Orlando, Fla.
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Scheik, Sven
A1  - Michaeli, Walter
A1  - Grönlund, Oliver
A1  - Neuß, Andreas
A1  - Wunderle, Johannes
A1  - Poprawe, Reinhart
A1  - Rösner, A.
A1  - Bobzin, Kirsten
A1  - Schläfer, Thomas
A1  - Theiß, Sebastian
A1  - Kutschmann, Pia
A1  - Haberstroh, Edmund
A1  - Flock, Dustin
A1  - Bührig-Polaczek, Andreas
A1  - Jakob, M.
ED  - Thoben, Klaus-Dieter
T1  - Novel process chains for the production of plastics/metal-hybrids
T2  - 17th International Conference on Concurrent Enterprising (ICE 2011) : Aachen, Germany, 20 - 22 June 2011
Y1  - 2011
SN  - 978-1-457-70772-8 ; 978-3-943024-05-0
SP  - 596
EP  - 604
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Numerical and experimental investigation of tensile behavior of laser beam welded TRIP700 steel
JF  - ISIJ international
Y1  - 2011
SN  - 1347-5460 (E-Journal); 0915-1559 (Print)
VL  - Vol. 51
IS  - No. 3
SP  - 429
EP  - 434
PB  - ISIJ
CY  - Tōkyō
ER  - 
TY  - JOUR
A1  - Glowania, Michael
A1  - Gries, Thomas
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Innovative coating technology for textile reinforcements of concrete applications
JF  - 13th International Congress on Polymers in Concrete : 10 - 12 February 2010, Funchal, Madeira, Portugal.(Key engineering materials. Vol. 466)
Y1  - 2011
SN  - 978-3-03785-008-4
SN  - 1013-9826 (E-Journal) ; 0252-1059 (Print)
SP  - 167
EP  - 173
PB  - Trans Tech Publications
CY  - Bäch
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
A1  - Turichin, Gleb
A1  - Valdaitseva, Elena
A1  - Bach, Friedrich-Wilhelm
A1  - Hassel, Thomas
A1  - Beniyashi, Alexander
T1  - Investigation of factors for defect-free weld formation by non-vacuum electron beam welding
T2  - Laser technologies in welding and materials processing : proceedings of the fifth international conference, 24 - 27 May 2011, Katsiveli, Crimea, Ukraine
Y1  - 2011
SP  - 104
EP  - 109
PB  - Paton Publ. House
CY  - Kiev
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Ramazani, Ali
A1  - Yang, Li
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization of gas metal arc welded hot rolled DP600 steel
JF  - Steel research international
Y1  - 2011
SN  - 1869-344X (E-Book); 1611-3683 (Print)
VL  - Vol. 82
IS  - Iss. 12
SP  - 1408
EP  - 1416
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels
JF  - Materialwissenschaft und Werkstofftechnik
N2  - The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.
Y1  - 2010
U6  - https://doi.org/10.1002/mawe.201000692
SN  - 1521-4052
VL  - 41
IS  - 11
SP  - 972
EP  - 983
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - https://doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels
JF  - Applied surface science
N2  - The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.
Y1  - 2010
U6  - https://doi.org/10.1016/j.apsusc.2010.08.042
SN  - 0169-4332 (E-Journal); 0169-4332 (Print)
VL  - 257
IS  - 5
SP  - 1401
EP  - 1406
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Ahmed, Essam
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
T1  - On formability of tailor laser welded blanks of DP/TRIP steel sheets
JF  - Science and technology of welding and joining
N2  - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.
Y1  - 2010
U6  - https://doi.org/10.1179/136217110X12731414739754
SN  - 1743-2936
VL  - 15
IS  - 5
SP  - 337
EP  - 342
PB  - Maney
CY  - Leeds
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - CHAP
A1  - Göttsche, Joachim
A1  - Hinsch, Andreas
A1  - Wittwer, Volker
ED  - Hugo-Le Goff, Anne
T1  - Electrochromic and optical properties of mixed WO3-TiO2 thin films produced by sputtering and the sol-gel technique
T2  - Optical materials technology for energy efficiency and solar energy conversion XI: chromogenics for smart windows : 19 and 21 May 1992, Toulouse-Labège. (SPIE proceedings series. 1728)
Y1  - 1992
SN  - 0-8194-0901-4
SP  - 13
EP  - 25
PB  - SPIE
CY  - Bellingham, Wash.
ER  - 
TY  - CHAP
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
A1  - Schleser, Markus
A1  - Meskouris, Konstantin
A1  - Reisgen, Uwe
ED  - Curbach, Manfred
T1  - Parametric study of tensile response of TRC specimens reinforced with epoxy-penetrated multi-filament yarns
T2  - Textilbeton - Theorie und Praxis : Tagungsband zum 4. Kolloquium zu textilbewehrten Tragwerken (CTRS4) und zur 1. Anwendertagung, Dresden, 3.6.2009 - 5.6.2009
Y1  - 2009
SN  - 978-3-86780-122-5
SP  - 87
EP  - 98
PB  - Techn. Univ.
CY  - Dresden
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Feldmann, Martin
A1  - Pak, Daniel
A1  - Geßler, Achim
T1  - Investigation of punctiform, plane and hybrid joints of textile-reinforced concrete parts
JF  - Cement and concrete composites
Y1  - 2008
SN  - 0958-9465
VL  - Vol. 30
IS  - iss. 2
SP  - 82
EP  - 87
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Hegger, Josef
A1  - Voss, Stefan
ED  - Reinhardt, Hans W.
T1  - Load-bearing behaviour of polymer-impregnated textiles in concrete
T2  - Fifth International Workshop on High Performance Fiber Reinforced Cement Composites (HPFRCC 5) : Mainz, July 10 - 13, 2007. (RILEM proceedings. 53)
Y1  - 2007
SN  - 978-2-35158-046-2
SP  - 183
EP  - 192
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Chudoba, Rostislav
A1  - Konrad, Martin
ED  - Triantafillou, T. C.
T1  - Experimental investigation and micro-mechanical simulaltion of concrete reinforced with epoxy impregnated fabrics
T2  - Fibre-reinforced polymer reinforcement for concrete structures : proceedings of the 8th international conference : Patras, Greece, July 16- 18, 2007
Y1  - 2007
SN  - 9608969107
SP  - 456
EP  - 457
PB  - Univ.
CY  - Patras
ER  - 
TY  - JOUR
A1  - Feldmann, Markus
A1  - Pak, Daniel
A1  - Geßler, Achim
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - Bonded connections for textile reinforced concrete structures
JF  - Cailiao-gongcheng = Journal of materials engineering
Y1  - 2006
SN  - 1001-4381
IS  - Special iss.
SP  - 123
EP  - 127
ER  - 
TY  - JOUR
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilthey, Ulrich
T1  - Application of polymers for textile-reinforced concrete
JF  - Journal of materials in civil engineering : properties, applications, durability
Y1  - 2006
SN  - 0899-1561
VL  - 18
IS  - 5
SP  - 670
EP  - 676
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Barroso de Aguiar, Jose
ED  - Jalali, Said
ED  - Camoes, Aires
ED  - Ferrera, Rui Miguel
T1  - Composite improvement of textile reinforced concrete by polymeric impregnation of the textiles
T2  - International Symposium Polymers in Concrete : proceedings of ISPIC 2006, 2-4 April 2006 - University of Minho - Guimarães, Portugal
Y1  - 2006
SN  - 972-99179-1-4
SP  - 185
EP  - 192
PB  - Universidade do Minho, Departamento de Engenharia Civil
CY  - Guimarães
ER  - 
TY  - CHAP
A1  - Pak, Daniel
A1  - Piegeler, D.
A1  - Feldmann, Markus
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
ED  - Hegger, Josef
T1  - Hybrid joints of textile reinforced concrete parts - designed for assembly
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 181
EP  - 190
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Raupach, Michael
A1  - Orlowsky, Jeannette
A1  - Büttner, T.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
ED  - Hegger, Josef
T1  - Epoxy-impregnated textiles in concrete - load bearing capacity and durability
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 77
EP  - 88
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Möller, M.
A1  - Weichhold, O.
ED  - Hegger, Josef
T1  - Application of polymers in textile reinforced concrete : from the interface to construction elements
T2  - Textile reinforced concrete : proceedings of the 1. International RILEM Conference, held at the RWTH Aachen, September 6/7, 2006. (RILEM proceedings ; 50)
Y1  - 2006
SN  - 2-912143-97-7
SP  - 55
EP  - 64
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Kolkmann, Annette
A1  - Gries, Thomas
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
T1  - Innovative yarn structures and coatings for textile reinforced concrete
T2  - All lectures / Techtextil Symposium : 6. - 9. 6.2005, Frankfurt am Main
Y1  - 2005
CY  - Frankfurt a.M.
ER  - 
TY  - JOUR
A1  - Dilthey, Ulrich
A1  - Brandenburg, Annette
A1  - Schleser, Markus
T1  - Dispensing and application of unfilled adhesives in the micro range
JF  - Welding and cutting. 3 (2004), H. 4
Y1  - 2004
SN  - 1612-3433
SP  - 250
EP  - 254
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Raupach, Michael
A1  - Schleser, Markus
A1  - Walk-Lauffer, Bernd
T1  - Improvement of textile reinforced concrete by polymer additives
T2  - ICPIC '04 : 11th International Congress on Polymers in Concrete : 2nd-4th June, 2004 at BAM, Berlin, Germany : proceedings / ed. by M. Maultzsch
Y1  - 2004
SN  - 3-00-013706-8
SP  - 469
EP  - 476
PB  - BAM
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Walk-Lauffer, Bernd
A1  - Raupach, Michael
A1  - Dilger, Klaus
A1  - Böhm, Stefan
A1  - Mundt, F.
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
T1  - The interconnection between inner filaments of textile reinforcement by means of polymer modified concrete
T2  - Proceedings of the First International Conference on Innovative Materials and Technologies for Construction and Restoration : : Lecce, June 6 - 9, 2004 / Università degli Studi di Lecce / ed. Antonio La Tegola. Vol. 1: Key-notes, materials, construction
Y1  - 2004
SP  - 150
EP  - 159
PB  - Liguori
CY  - Napoli
ER  - 
TY  - CHAP
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
ED  - Brodowsky, Horst
T1  - Thermodynamic behaviour of oxygen in molten metallic alloys
T2  - Thermochemistry of alloys : recent developments of experimental methods ; [proceedings of the NATO Advanced Study Institute on Thermochemistry of Alloys, Recent Developments of Experimental Methods, Kiel, F.R.G., August 17 - 27, 1987]. - (NATO ASI series : Series C ; 286)
Y1  - 1989
SN  - 0-7923-0434-9
SP  - 419
EP  - 428
PB  - Springer
CY  - Dordrecht [u.a.]
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the lead-antimony system at 1173 K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1987
SN  - 0044-2658
VL  - 40
IS  - 6
SP  - 316
EP  - 319
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics of oxygen in the copper-antimony system at 1473K
JF  - Erzmetall : Rohstoffgewinnung, Verarbeitung, Recycling, Umwelttechnik
Y1  - 1988
SN  - 0044-2658
VL  - 41
IS  - 10
SP  - 498
EP  - 501
ER  - 
TY  - JOUR
A1  - Wang, Mao
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Experiments on the electrochemical determination of the sulphur activities in the system copper-silver at 1200°C
JF  - Zeitschrift für Metallkunde
Y1  - 1988
SN  - 0044-3093
VL  - 79
IS  - 5
SP  - 336
EP  - 339
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid bismuth-lead and bismuth-antimony alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1987
SN  - 0940-483X
SN  - 0005-9021
VL  - 91
IS  - 7
SP  - 790
EP  - 794
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - Thermodynamic relations between component activities and gas solubilities in binary metallic systems
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1985
SN  - 0940-483X
SN  - 0005-9021
VL  - 89
IS  - 2
SP  - 130
EP  - 134
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Experiments and theoretical considerations on the solution of oxygen in binary metal alloys
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1983
SN  - 0005-9021
SN  - 0940-483X
VL  - 87
IS  - 12
SP  - 1201
EP  - 1204
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Thermodynamics and solubility of oxygen in liquid copper-lead alloys at 1200°C from E.M.F. measurements
JF  - Berichte der Bunsengesellschaft für physikalische Chemie
Y1  - 1984
SN  - 0940-483X
SN  - 0005-9021
VL  - 88
IS  - 8
SP  - 707
EP  - 710
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
A1  - Kapoor, Madan Lal
T1  - Prediction of thermodynamic properties of oxygen in binary metallic solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 6
SP  - 372
EP  - 375
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Kapoor, Madan Lal
A1  - Frohberg, Martin G.
T1  - Thermodynamic behaviour of oxygen in molten substitutional alloy solvents
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 1
SP  - 53
EP  - 58
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigation of the thermodynamics of oxygen and the determination of phase boundaries in the system copper-oxygen-bismuth at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 8
SP  - 530
EP  - 534
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The application of a quadi-chemical lattice model to binary metallic solvents containing oxygen in higher concentrations
JF  - Zeitschrift für Metallkunde
Y1  - 1983
SN  - 0044-3093
VL  - 74
IS  - 10
SP  - 665
EP  - 666
ER  - 
TY  - JOUR
A1  - Anik, Sabri
A1  - Frohberg, Martin G.
T1  - Investigations of the thermodynamics of oxygen and the determination of the miscibility gap in the system copper-oxygen-lead at 12000C
JF  - Zeitschrift für Metallkunde
Y1  - 1984
SN  - 0044-3093
VL  - 75
IS  - 8
SP  - 586
EP  - 589
ER  - 
TY  - JOUR
A1  - Frohberg, Martin G.
A1  - Anik, Sabri
T1  - The calculation of component activities of binary metallic melts from their gas solubilities
JF  - Zeitschrift für Metallkunde
Y1  - 1985
SN  - 0044-3093
VL  - 76
IS  - 2
SP  - 135
EP  - 137
ER  - 
TY  - RPRT
A1  - Adomeit, G.
A1  - Willms, Herbert
T1  - Experimental investigation of the acceleration of deflagration in wake flow : final report. - (Euratom-publications-EUR ; 9593 : Nuclear science and technology)
Y1  - 1984
SN  - 92-825-4699-3
PB  - Commission of the European Communities
CY  - Luxembourg
ER  - 
TY  - CHAP
A1  - Adomeit, G.
A1  - Willms, Herbert
ED  - Skupinski, Edwin
T1  - Experimental investigation of the acceleration of deflagration in wake flow
T2  - Safety of thermal water reactors : proceedings of a Seminar on the Results of the European Communities’ Indirect Action Research Programme on Safety of Thermal Water Reactors, held in Brussels, 1–3 October 1984 / Commission of the European Communities
Y1  - 1984
SN  - 0-86010-678-0
SN  - 978-94-009-4972-0 (Online-Nachdr. vom Springer-Verl.)
N1  - Forschungsvorhaben Nr. 024 SRD
SP  - 294
EP  - 304
PB  - Graham & Trotman [u.a.]
CY  - London Gaithersburg, Md.
ER  - 
TY  - CHAP
A1  - Beer, Stefan
A1  - Haidn, O.J.
A1  - Willms, Herbert
ED  - Carvalho, Maria da Graça
T1  - Control of stoichiometric propellant supply in an H2/O2-spinning reserve system
T2  - Combustion technologies for a clean environment : selected papers from the proceedings of the first international conference, Vilamoura, Portugal, September 3 - 6, 1991. - (Energy, combustion and the environment ;1)
Y1  - 1995
SN  - 2-88124-619-2
SP  - 825
EP  - 838
PB  - Gordon and Breach
CY  - Basel [u.a.]
ER  - 
TY  - JOUR
A1  - Abdel-Latif, Lotfie Ahmed
A1  - Peeken, Heinz
A1  - Benner, Joachim
T1  - Thermohydrodynamic analysis of thrust-bearing with circular pads running on bubbly oil (BTHD-theory)
JF  - Journal of tribology
Y1  - 1985
SN  - 0742-4787
SN  - 1528-8897
VL  - 107
IS  - 4
SP  - 527
EP  - 537
ER  -