TY  - CHAP
A1  - Carzana, Livio
A1  - Dachwald, Bernd
A1  - Noomen, Ron
T1  - Model and trajectory optimization for an ideal laser-enhanced solar sail
T2  - 68th International Astronautical Congress
N2  - A laser-enhanced solar sail is a solar sail that is not solely propelled by solar radiation but additionally by a laser beam that illuminates the sail. This way, the propulsive acceleration of the sail results from the combined action of the solar and the laser radiation pressure onto the sail. The potential source of the laser beam is a laser satellite that coverts solar power (in the inner solar system) or nuclear power (in the outer solar system) into laser power. Such a laser satellite (or many of them) can orbit anywhere in the solar system and its optimal orbit (or their optimal orbits) for a given mission is a subject for future research. This contribution provides the model for an ideal laser-enhanced solar sail and investigates how a laser can enhance the thrusting capability of such a sail. The term ”ideal” means that the solar sail is assumed to be perfectly reflecting and that the laser beam is assumed to have a constant areal power density over the whole sail area. Since a laser beam has a limited divergence, it can provide radiation pressure at much larger solar distances and increase the radiation pressure force into the desired direction. Therefore, laser-enhanced solar sails may make missions feasible, that would otherwise have prohibitively long flight times, e.g. rendezvous missions in the outer solar system. This contribution will also analyze exemplary mission scenarios and present optimial trajectories without laying too much emphasis on the design and operations of the laser satellites. If the mission studies conclude that laser-enhanced solar sails would have advantages with respect to ”traditional” solar sails, a detailed study of the laser satellites and the whole system architecture would be the second next step
Y1  - 2017
N1  - 68th International Astronautical Congress: Unlocking Imagination, Fostering Innovation and Strengthening Security, IAC 2017, 2017-09-25 → 2017-09-29, Adelaide, Australia
ER  - 
TY  - CHAP
A1  - Dowidat, Linda
A1  - König, Johannes Alexander
A1  - Wolf, Martin
T1  - The motivational competence developing game framework
T2  - Mensch und Computer 2017 - Tagungsband
N2  - Competence Developing Games (CDGs) are a new concept of how to think about games with serious intentions. In order to emphasize on this topic, a new framework has been developed. It basically relies on learning and motivation theories. This ‘motivational Competence Developing Game Framework’ demonstrates how it is possible to use these theories in a CDG development process. The theoretical derivation and use of the framework is explained in this paper.
KW  - Competence Developing Games
KW  - Serious Games
KW  - Gamification
KW  - motivation theories
KW  - learning theories
Y1  - 2017
U6  - http://dx.doi.org/10.18420/muc2017-mci-0130
SP  - 15
EP  - 26
PB  - Gesellschaft für Informatik e.V.
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
A1  - Ceriotti, Matteo
T1  - Multiple NEA rendezvous mission: Solar sailing options
T2  - Fourth International Symposium on Solar Sailing
N2  - The scientific interest in near-Earth asteroids (NEAs) and the classification of some of those as potentially hazardous asteroid for the Earth stipulated the interest in NEA exploration. Close-up observations of these objects will increase drastically our knowledge about the overall NEA population. For this reason, a multiple NEA rendezvous mission through solar sailing is investigated, taking advantage of the propellantless nature of this groundbreaking propulsion technology. Considering a spacecraft based on the DLR/ESA Gossamer technology, this work focuses on the search of possible sequences of NEA encounters. The effectiveness of this approach is demonstrated through a number of fully-optimized trajectories. The results show that it is possible to visit five NEAs within 10 years with near-term solar-sail technology. Moreover, a study on a reduced NEA database demonstrates the reliability of the approach used, showing that 58% of the sequences found with an approximated trajectory model can be converted into real solar-sail trajectories. Lastly, this second study shows the effectiveness of the proposed automatic optimization algorithm, which is able to find solutions for a large number of mission scenarios without any input required from the user.
KW  - Multiphase
KW  - Trajectory Optimization
KW  - Automated Optimization
KW  - Gossamer
KW  - Sequence-Search
Y1  - 2017
N1  - Fourth International Symposium on Solar Sailing (ISSS 2017), Kyoto, Japan, 17-20 Jan 2017.
http://www.jsforum.or.jp/ISSS2017/
SP  - 1
EP  - 11
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Biele, Jens
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Lange, Caroline
A1  - Ulamec, Stephan
A1  - Ziach, Christian
A1  - Spröwitz, Tom
A1  - Ruffer, Michael
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Toth, Norbert
A1  - Mimasu, Yuya
A1  - Rittweger, Andreas
A1  - Bibring, Jean-Pierre
A1  - Braukhane, Andy
A1  - Boden, Ralf Christian
A1  - Dumont, Etienne
A1  - Jahnke, Stephan Siegfried
A1  - Jetzschmann, Michael
A1  - Krüger, Hans
A1  - Lange, Michael
A1  - Gomez, Antonio Martelo
A1  - Massonett, Didier
A1  - Okada, Tatsuaki
A1  - Sagliano, Marco
A1  - Sasaki, Kaname
A1  - Schröder, Silvio
A1  - Sippel, Martin
A1  - Skoczylas, Thomas
A1  - Wejmo, Elisabet
T1  - Small landers and separable sub-spacecraft for near-term solar sails
T2  - The Fourth International Symposium on Solar Sailing 2017
N2  - Following the successful PHILAE landing with ESA's ROSETTA probe and the launch of the MINERVA rovers and the Mobile Asteroid Surface Scout, MASCOT, aboard the JAXA space probe, HAYABUSA2, to asteroid (162173) Ryugu, small landers have found increasing interest. Integrated at the instrument level in their mothership they support small solar system body studies. With efficient capabilities, resource-friendly design and inherent robustness they are an attractive exploration mission element. We discuss advantages and constraints of small sub-spacecraft, focusing on emerging areas of activity such as asteroid diversity studies, planetary defence, and asteroid mining, on the background of our projects PHILAE, MASCOT, MASCOT2, the JAXA-DLR Solar Power Sail Lander Design Study, and others. The GOSSAMER-1 solar sail deployment concept also involves independent separable sub-spacecraft operating synchronized to deploy the sail. Small spacecraft require big changes in the way we do things and occasionally a little more effort than would be anticipated based on a traditional large spacecraft approach. In a Constraints-Driven Engineering environment we apply Concurrent Design and Engineering (CD/CE), Concurrent Assembly, Integration and Verification (CAIV) and Model-Based Systems Engineering (MBSE). Near-term solar sails will likely be small spacecraft which we expect to harmonize well with nano-scale separable instrument payload packages.
KW  - Small Solar System Body Lander
KW  - Small Spacecraft
KW  - PHILAE
KW  - MASCOT
KW  - Solar Power Sail
Y1  - 2017
N1  - The Fourth International Symposium on Solar Sailing 2017, 17-20 January 2017. Kyoto Research Park, Kyoto, Japan
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
T1  - Radiation pressure force model for an ideal laser-enhanced solar sail
T2  - 4th International Symposium on Solar Sailing
N2  - The concept of a laser-enhanced solar sail is introduced and the radiation pressure force model for an ideal laser-enhanced solar sail is derived. A laser-enhanced solar sail is a “traditional” solar sail that is, however, not solely propelled by solar radiation, but additionally by a laser beam that illuminates the sail. The additional laser radiation pressure increases the sail's propulsive force and can give, depending on the location of the laser source, more control authority over the direction of the solar sail’s propulsive force vector. This way, laser-enhanced solar sails may augment already existing solar sail mission concepts and make novel mission concepts feasible.
Y1  - 2017
N1  - 4th International Symposium on Solar Sailing
17-20 January 2017, Kyōto, Japan
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Boden, Ralf
A1  - Ceriotti, Matteo
A1  - Dachwald, Bernd
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Lange, Caroline
A1  - Lichtenheldt, Roy
A1  - Pelivan, Ivanka
A1  - Peloni, Alessandro
A1  - Riemann, Johannes
A1  - Spröwitz, Tom
A1  - Tardivel, Simon
T1  - Soil to sail-asteroid landers on near-term sailcraft as an evolution of the GOSSAMER small spacecraft solar sail concept for in-situ characterization
T2  - 5th IAA Planetary Defense Conference
KW  - multiple NEA rendezvous
KW  - solar sail
KW  - GOSSAMER-1
KW  - MASCOT
KW  - asteroid sample return
Y1  - 2017
N1  - 5th IAA Planetary Defense Conference – PDC 2017
15-19 May 2017, Tokyo, Japan
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Farnetane, Lucas S.
A1  - Pöttgen, Philipp
A1  - Vergé, Angela
A1  - Pelz, Peter F.
T1  - Multicriterial design of a hydrostatic transmission system via mixed-integer programming
T2  - Operations Research Proceedings 2015
N2  - In times of planned obsolescence the demand for sustainability keeps growing. Ideally, a technical system is highly reliable, without failures and down times due to fast wear of single components. At the same time, maintenance should preferably be limited to pre-defined time intervals. Dispersion of load between multiple components can increase a system’s reliability and thus its availability inbetween maintenance points. However, this also results in higher investment costs and additional efforts due to higher complexity. Given a specific load profile and resulting wear of components, it is often unclear which system structure is the optimal one. Technical Operations Research (TOR) finds an optimal structure balancing availability and effort. We present our approach by designing a hydrostatic transmission system.
Y1  - 2017
SN  - 978-3-319-42901-4
SN  - 978-3-319-42902-1
U6  - http://dx.doi.org/10.1007/978-3-319-42902-1_41
N1  - International Conference of the German, Austrian and Swiss Operations Research Societies (GOR, ÖGOR, SVOR/ASRO), University of Vienna, Austria, September 1-4, 2015
SP  - 301
EP  - 307
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Dörig, Bastian
A1  - Ederer, Thorsten
A1  - Pelz, Peter Franz
A1  - Pfetsch, Marc
A1  - Wolf, Jan
T1  - A mixed-integer nonlinear program for the design of gearboxes
T2  - Operations Research Proceedings 2016
N2  - Gearboxes are mechanical transmission systems that provide speed and torque conversions from a rotating power source. Being a central element of the drive train, they are relevant for the efficiency and durability of motor vehicles. In this work, we present a new approach for gearbox design: Modeling the design problem as a mixed-integer nonlinear program (MINLP) allows us to create gearbox designs from scratch for arbitrary requirements and—given enough time—to compute provably globally optimal designs for a given objective. We show how different degrees of freedom influence the runtime and present an exemplary solution.
Y1  - 2017
SN  - 978-3-319-55701-4
U6  - http://dx.doi.org/10.1007/978-3-319-55702-1_31
SP  - 227
EP  - 233
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Altherr, Lena
A1  - Ederer, Thorsten
A1  - Schänzle, Christian
A1  - Lorenz, Ulf
A1  - Pelz, Peter F.
T1  - Algorithmic system design using scaling and affinity laws
T2  - Operations Research Proceedings 2015
N2  - Energy-efficient components do not automatically lead to energy-efficient systems. Technical Operations Research (TOR) shifts the focus from the single component to the system as a whole and finds its optimal topology and operating strategy simultaneously. In previous works, we provided a preselected construction kit of suitable components for the algorithm. This approach may give rise to a combinatorial explosion if the preselection cannot be cut down to a reasonable number by human intuition. To reduce the number of discrete decisions, we integrate laws derived from similarity theory into the optimization model. Since the physical characteristics of a production series are similar, it can be described by affinity and scaling laws. Making use of these laws, our construction kit can be modeled more efficiently: Instead of a preselection of components, it now encompasses whole model ranges. This allows us to significantly increase the number of possible set-ups in our model. In this paper, we present how to embed this new formulation into a mixed-integer program and assess the run time via benchmarks. We present our approach on the example of a ventilation system design problem.
KW  - Optimal Topology
KW  - Piecewise Linearization
KW  - Ventilation System
KW  - Similarity Theory
Y1  - 2017
SN  - 978-3-319-42901-4
SN  - 978-3-319-42902-1
U6  - http://dx.doi.org/10.1007/978-3-319-42902-1
N1  - International Conference of the German, Austrian and Swiss Operations Research Societies (GOR, ÖGOR, SVOR/ASRO), University of Vienna, Austria, September 1-4, 2015
SP  - 605
EP  - 611
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Ayed, Anis Haj
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Bohn, D.
T1  - CFD based exploration of the dry-low-NOx hydrogen micromix combustion technology at increased energy densities
JF  - Propulsion and Power Research
KW  - Micromix combustion
KW  - Hydrogen gas turbine
KW  - Hydrogen combustion
KW  - High hydrogen combustion
KW  - Dry-low-NOx (DLN) combustion
Y1  - 2017
SN  - 2212-540X
U6  - http://dx.doi.org/10.1016/j.jppr.2017.01.005
VL  - 6
IS  - 1
SP  - 15
EP  - 24
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ayed, Anis Haj
A1  - Striegan, Constantin J. D.
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Kazari, M.
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Automated design space exploration of the hydrogen fueled "Micromix" combustor technology
N2  - Combined with the use of renewable energy sources for
its production, Hydrogen represents a possible alternative gas
turbine fuel for future low emission power generation. Due to
its different physical properties compared to other fuels such
as natural gas, well established gas turbine combustion
systems cannot be directly applied for Dry Low NOx (DLN)
Hydrogen combustion. This makes the development of new
combustion technologies an essential and challenging task
for the future of hydrogen fueled gas turbines.
The newly developed and successfully tested “DLN
Micromix” combustion technology offers a great potential to
burn hydrogen in gas turbines at very low NOx emissions.
Aiming to further develop an existing burner design in terms
of increased energy density, a redesign is required in order to
stabilise the flames at higher mass flows and to maintain low
emission levels.
For this purpose, a systematic design exploration has
been carried out with the support of CFD and optimisation
tools to identify the interactions of geometrical and design
parameters on the combustor performance. Aerodynamic
effects as well as flame and emission formation are observed
and understood time- and cost-efficiently. Correlations
between single geometric values, the pressure drop of the
burner and NOx production have been identified as a result.
This numeric methodology helps to reduce the effort of
manufacturing and testing to few designs for single
validation campaigns, in order to confirm the flame stability
and NOx emissions in a wider operating condition field.
Y1  - 2017
N1  - Proceedings of the 1st Global Power and Propulsion Forum
GPPF 2017, Jan 16-18, 2017, Zurich, Switzerland
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Kubalski, T.
A1  - Butenweg, Christoph
A1  - Marinković, Marko
A1  - Klinkel, S.
T1  - Investigation Of The Seismic Behaviour Of Infill Masonry Using Numerical Modelling Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Masonry is a widely spread construction type which is used all over the world for different types of structures. Due to its simple and cheap construction, it is used as non-structural as well as structural element. In frame structures, such as
reinforced concrete frames, masonry may be used as infill. While the bare frame itself is able to carry the loads when it comes to seismic events, the infilled frame is not able to warp freely due to the constrained movement. This restraint results in a complex interaction between the infill and the surrounding frame, which may lead to severe damage to the infill as well as the surrounding frame. The interaction is studied in different projects and effective approaches for the description of the behavior are still lacking. Experimental programs are usually quite expensive, while numerical models, once validated, do offer an efficient approach for the investigation of the interaction when horizontally loaded. In order to study the numerous parameters influencing the seismic load bearing behavior, numerical models may be used. Therefore, this contribution presents a numerical approach for the simulation of infill masonry in reinforced concrete frames. Both parts, the surrounding frame as well as the infill are represented by micro modelling approaches to correctly take into account the different types of failure. The adopted numerical model describes the inelastic behavior of the system, as indicated by the obtained results of the overall structural response as well as the formation of damage in the infilled wall. Comparison of the numerical and experimental results highlights the valuable contribution of numerical simulations in the study and design of infilled frames. As damage of the infill masonry may occur in-plane due to the interaction as well as out-of-plane due to the low vertical load, both directions of loading are investigated.
Y1  - 2017
N1  - Paper No 3064
SP  - 1
EP  - 11
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rosin, J.
A1  - Mykoniou, K.
A1  - Butenweg, Christoph
T1  - Analysis Of Base Isolated Liquid Storage Tanks With 3D Fsi-Analysis As Well As Simplified Approaches
T2  - 16th World Conference on Earthquake Engineering, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
N2  - Tanks are preferably designed, for cost-saving reasons, as circular, cylindrical, thin-walled shells. In case of seismic excitation, these constructions are highly vulnerable to stability failures. An earthquake-resistant design of rigidly supported tanks for high seismic loading demands, however, uneconomic wall thicknesses. A cost-effective alternative can be provided by base isolation systems. In this paper, a simplified seismic design procedure for base isolated tanks is introduced, by appropriately modifying the standard mechanical model for flexible, rigidly supported tanks. The non-linear behavior of conventional base isolation systems becomes an integral part of a proposed simplified process, which enables
the assessment of the reduced hydrodynamic forces acting on the tank walls and the corresponding stress distribution. The impulsive and convective actions of the liquid are taken into account. The validity of this approach is evaluated by
employing a non-linear fluid-structure interaction algorithm of finite element method. Special focus is placed on the boundary conditions imposed from the base isolation and the resulting hydrodynamic pressures. Both horizontal and vertical
component of ground motion are considered in order to study the principal effects of the base isolation on the pressure distribution of the tank walls. The induced rocking effects associated with elastomeric bearings are discussed. The results
manifest that base isolated tanks can be designed for seismic loads by means of the proposed procedure with sufficient accuracy, allowing to dispense with numerically expensive techniques.
KW  - liquid storage tank
KW  - seismic isolation
KW  - elastomeric bearing
KW  - friction pendulum bearing
KW  - simplified approach
Y1  - 2017
N1  - Paper No 2246
SP  - 1
EP  - 14
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - CHAP
A1  - Rajan, S.
A1  - Butenweg, Christoph
A1  - Dalguer, L. A.
A1  - An, J. H.
A1  - Renault, P.
A1  - Klinkel, S.
T1  - Fragility curves for a three-storey reinforced concrete test structure of the international benchmark SMART 2013
T2  - 16th World Conference on Earthquake, 16WCEE 2017 Santiago Chile, January 9th to 13th 2017
Y1  - 2017
N1  - Paper No 2119
PB  - Chilean Association on Seismology and Earthquake Engineering (ACHISINA)
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Holler, Stefan
T1  - Analysis of cylindrical granular material silos under seismic excitation
JF  - Buildings
N2  - Silos generally work as storage structures between supply and demand for various goods, and their structural safety has long been of interest to the civil engineering profession. This is especially true for dynamically loaded silos, e.g., in case of seismic excitation. Particularly thin-walled cylindrical silos are highly vulnerable to seismic induced pressures, which can cause critical buckling phenomena of the silo shell. The analysis of silos can be carried out in two different ways. In the first, the seismic loading is modeled through statically equivalent loads acting on the shell. Alternatively, a time history analysis might be carried out, in which nonlinear phenomena due to the filling as well as the interaction between the shell and the granular material are taken into account. The paper presents a comparison of these approaches. The model used for the nonlinear time history analysis considers the granular material by means of the intergranular strain approach for hypoplasticity theory. The interaction effects between the granular material and the shell is represented by contact elements. Additionally, soil–structure interaction effects are taken into account.
KW  - granular silo
KW  - earthquake engineering
KW  - hypoplasticity
KW  - nonlinear transient analyses
Y1  - 2017
U6  - http://dx.doi.org/10.3390/buildings7030061
SN  - 2075-5309
VL  - 7
IS  - 3
SP  - 1
EP  - 12
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Klein, Michel
A1  - Butenweg, Christoph
A1  - Klinkel, Sven
T1  - The Influence of Soil-Structure-Interaction on the Fatigue Analysis in the Foundation Design of Onshore Wind Turbines
JF  - Procedia Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.proeng.2017.09.325
SN  - 1877-7058
VL  - 199
SP  - 3218
EP  - 3223
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Müller, Wolfram
A1  - Jung, Alexander
A1  - Ahammer, Helmut
T1  - Advantages and problems of nonlinear methods applied to analyze physiological time signals: human balance control as an example
JF  - Scientific Reports
Y1  - 2017
SN  - 2045-2322
U6  - http://dx.doi.org/10.1038/s41598-017-02665-5
VL  - 7
IS  - Article number 2464
SP  - 1
EP  - 11
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Mayer, Jan
A1  - Hentschke, Reinhard
A1  - Hager, Jonathan
A1  - Hojdis, Nils
A1  - Karimi-Varnaneh, Hossein Ali
T1  - A Nano-Mechanical Instability as Primary Contribution to Rolling Resistance
JF  - Scientific Reports
Y1  - 2017
SN  - 2045-2322
VL  - 7
IS  - Article number 11275
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Meyer, Jan
A1  - Hentschke, Reinhard
A1  - Hager, Jonathan
A1  - Hojdis, Nils
A1  - Karimi-Varzaneh, Hossein Ali
T1  - Molecular Simulation of Viscous Dissipation due to Cyclic Deformation of a Silica–Silica Contact in Filled Rubber
JF  - Macromolecules
Y1  - 2017
U6  - http://dx.doi.org/10.1021/acs.macromol.7b00947
SN  - 1520-5835
VL  - 50
IS  - 17
SP  - 6679
EP  - 6689
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
A1  - Steffen, Lucas
A1  - Balvers, Johannes M.
A1  - Duhovic, Miro
T1  - Thermal optimization of composite autoclave molds using the shift factor approach for boundary condition estimation
JF  - Journal of Composite Materials
Y1  - 2017
U6  - http://dx.doi.org/10.1177/0021998317699868
SN  - 1530-793X
VL  - 51
IS  - 12
SP  - 1753
EP  - 1767
PB  - Sage
CY  - London
ER  - 
TY  - JOUR
A1  - Weber, Tobias
A1  - Ruff-Stahl, Hans-Joachim K.
T1  - Advances in Composite Manufacturing of Helicopter Parts
JF  - International Journal of Aviation, Aeronautics, and Aerospace
Y1  - 2017
U6  - http://dx.doi.org/10.15394/ijaaa.2017.1153
SN  - 2374-6793
VL  - 4
IS  - 1
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Abanteriba, Sylvester
T1  - A comparison of complex chemistry mechanisms for hydrogen methane blends based on the Sandia / Sydney Bluff-Body Flame HM1
T2  - Proceedings of the Eleventh Asia‐Pacific Conference on Combustion (ASPACC 2017), New South Wales, Australia, 10-14 December 2017
Y1  - 2017
SN  - 978-1-5108-5646-2
SP  - 262
EP  - 265
ER  - 
TY  - JOUR
A1  - Chen, Chao
A1  - Jost, Peter
A1  - Volker, Hanno
A1  - Kaminski, Marvin
A1  - Wirtssohn, Matti R.
A1  - Engelmann, Ulrich M.
A1  - Krüger, K.
A1  - Schlich, Franziska F.
A1  - Schlockermann, Carl
A1  - Lobo, Ricardo P.S.M.
A1  - Wuttig, Matthias
T1  - Dielectric properties of amorphous phase-change materials
JF  - Physical Review B
Y1  - 2017
U6  - http://dx.doi.org/10.1103/PhysRevB.95.094111
SN  - 2469-9950
VL  - 95
IS  - 9
SP  - Article number 094111
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Buhl, Eva Miriam
A1  - Baumann, Martin
A1  - Schmitz-Rode, Thomas
A1  - Slabu, Ioana
T1  - Agglomeration of magnetic nanoparticles and its effects on magnetic hyperthermia
JF  - Current Directions in Biomedical Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1515/cdbme-2017-0096
SN  - 2364-5504
VL  - 3
IS  - 2
SP  - 457
EP  - 460
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Savitskaya, I. S.
A1  - Kistaubayeva, A. S.
A1  - Digel, Ilya
A1  - Shokatayeva, D. H.
T1  - Physicochemical and Antibacterial Properties of Composite Films Based on Bacterial Cellulose and Chitosan for Wound Dressing Materials
JF  - Eurasian Chemico-Technological Journal
Y1  - 2017
U6  - http://dx.doi.org/10.18321/ectj670
SN  - 2522-4867
VL  - 19
IS  - 3
SP  - 255
EP  - 264
ER  - 
TY  - JOUR
A1  - Wolisz, Henryk
A1  - Schütz, Thomas
A1  - Blanke, Tobias
A1  - Hagenkamp, Markus
A1  - Kohrn, Markus
A1  - Wesseling, Mark
A1  - Müller, Dirk
T1  - Cost optimal sizing of smart buildings' energy system components considering changing end-consumer electricity markets
JF  - Energy
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.energy.2017.06.025
VL  - 137
SP  - 715
EP  - 728
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - PAT
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Bayer, Robin
A1  - Gossmann, Matthias
T1  - Celldrum electrode arrangement for measuring mechanical stress [Patent of invention]
N2  - The invention pertains to a CellDrum electrode arrangement for measuring mechanical stress, comprising a mechanical holder (1 ) and a non-conductive membrane (4), whereby the membrane (4) is at least partially fixed at its circumference to the mechanical holder (1), keeping it in place when the membrane (4) may bend due to forces acting on the membrane (4), the mechanical holder (1) and the membrane (4) forming a container, whereby the membrane (1) within the container comprises an cell- membrane compound layer or biological material (3) adhered to the deformable membrane 4 which in response to stimulation by an agent may exert mechanical stress to the membrane (4) such that the membrane bending stage changes whereby the container may be filled with an electrolyte, whereby an electric contact (2) is arranged allowing to contact said electrolyte when filled into to the container, whereby within a predefined geometry to the fixing of the membrane (4) an electrode (7) is arranged, whereby the electrode (7) is electrically insulated with respect to the electric contact (2) as well as said electrolyte, whereby mechanical stress due to an agent may be measured as a change in capacitance.
Y1  - 2017
N1  - Patent auch unter EP3403090, CN109477828, US2019033245 und LU92948 veröffentlicht.
PB  - WIPO
CY  - Geneva
ER  - 
TY  - CHAP
A1  - Samuelsson, K.
A1  - Scheer, Nico
A1  - Wilson, I.
A1  - Wolf, C.R.
A1  - Henderson, C.J.
ED  - Chackalamannil, Samuel
T1  - Genetically Humanized Animal Models
T2  - Comprehensive Medicinal Chemistry III. 3rd Edition
N2  - Genetically humanized mice for proteins involved in drug metabolism and toxicity and mice engrafted with human hepatocytes are emerging as promising in vivo models for improved prediction of the pharmacokinetic, drug–drug interaction, and safety characteristics of compounds in humans. This is an overview on the genetically humanized and chimeric liver-humanized mouse models, which are illustrated with examples of their utility in drug metabolism and toxicity studies. The models are compared to give guidance for selection of the most appropriate model by highlighting advantages and disadvantages to be carefully considered when used for studies in drug discovery and development.
KW  - Chimeric liver-humanized mice
KW  - Drug distribution
KW  - Drug metabolism
KW  - Toxicology
KW  - Knockout mice
Y1  - 2017
SN  - 978-0-12-803201-5
U6  - http://dx.doi.org/10.1016/B978-0-12-409547-2.12376-5
SP  - 130
EP  - 149
PB  - Elsevier
CY  - Saint Louis
ER  - 
TY  - JOUR
A1  - Wilson, Ian D.
A1  - Wilson, Claire E.
A1  - Scheer, Nico
A1  - Dickie, A.P.
A1  - Schreiter, K.
A1  - Wilson, E. M.
A1  - Riley, R. J.
A1  - Wehr, R.
A1  - Bial, J.
T1  - The Pharmacokinetics and Metabolism of Lumiracoxib in Chimeric Humanized and Murinized FRG Mice
JF  - Biochemical pharmacology
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.bcp.2017.03.015
SN  - 1873-2968
VL  - Volume 135
SP  - 139
EP  - 150
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
T1  - Small Claims Regulation
T2  - European Encyclopedia of Private International Law
Y1  - 2017
SN  - 9781782547228
PB  - Edward Elgar Publishing
CY  - Cheltenham, UK
ER  - 
TY  - CHAP
A1  - Kroll-Ludwigs, Kathrin
T1  - Names of individuals
T2  - European Encyclopedia of Private International Law
Y1  - 2017
SN  - 9781782547228
PB  - Edward Elgar Publishing
CY  - Cheltenham, UK
ER  - 
TY  - CHAP
A1  - Herrmann, Ulf
A1  - Kearney, D.
A1  - Röger, M.
A1  - Prahl, C.
T1  - System performance measurements
T2  - The Performance of Concentrated Solar Power (CSP) Systems : Modelling, Measurement and Assessment
N2  - This chapter introduces performance and acceptance testing and describes state-of-the-art tools, methods, and instruments to assess the plant performance or realize plant acceptance testing. The status of the development of standards for performance assessment is given.
KW  - Performance measurement
KW  - Acceptance tests
KW  - Plant efficiency
Y1  - 2017
SN  - 978-0-08-100448-7
U6  - http://dx.doi.org/https://doi.org/10.1016/B978-0-08-100447-0.00005-5
SP  - 115
EP  - 165
PB  - Woodhead Publishing
CY  - Duxford
ER  - 
TY  - CHAP
A1  - Sauerborn, Markus
A1  - Liebenstund, Lena
A1  - Raue, Markus
A1  - Mang, Thomas
A1  - Herrmann, Ulf
A1  - Dueing, Andreas
T1  - Analytic method for material aging and quality analyzing to forecast long time stability of plastic micro heliostat components
T2  - AIP Conference Proceedings
Y1  - 2017
U6  - http://dx.doi.org/10.1063/1.4984388
VL  - 1850
IS  - 1
SP  - 030045-1
EP  - 030045-8
ER  - 
TY  - JOUR
A1  - Richter, Charlotte
A1  - Braunstein, Bjoern
A1  - Winnard, Andrew
A1  - Nasser, Mona
A1  - Weber, T.
T1  - Human Biomechanical and Cardiopulmonary Responses to Partial Gravity – A Systematic Review
JF  - Frontiers in physiology
Y1  - 2017
U6  - http://dx.doi.org/10.3389/fphys.2017.00583
IS  - 8, article 583
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - The Impact of Electric Propulsion on the Performance of VTOL UAVs
T2  - Deutscher Luft- und Raumfahrtkongress 2017, DLRK , München
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Stopforth, Riaan
A1  - Davrajh, Shaniel
A1  - Ferrein, Alexander
T1  - Design considerations of the duo fugam dual rotor UAV
T2  - 2017 Pattern Recognition Association of South Africa and Robotics and Mechatronics (PRASA-RobMech)
Y1  - 2017
SN  - 978-1-5386-2314-5
U6  - http://dx.doi.org/10.1109/RoboMech.2017.8261115
SP  - 7
EP  - 13
ER  - 
TY  - JOUR
A1  - Karnatak, Rajat
A1  - Kantz, Holger
A1  - Bialonski, Stephan
T1  - Early warning signal for interior crises in excitable systems
JF  - Physical Review E
Y1  - 2017
U6  - http://dx.doi.org/10.1103/PhysRevE.96.042211
SN  - 2470-0053
VL  - 96
IS  - 4
SP  - 042211
ER  - 
TY  - CHAP
A1  - Schildt, P.
A1  - Braun, Carsten
A1  - Marcocca, P.
T1  - Flight testing the extra 330LE flying testbed
T2  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017
Y1  - 2017
SN  - 978-151085387-4
N1  - 48th Annual International Symposium of the Society of Flight Test Engineers 2017, SFTE 2017; Destin; United States; 30 October 2017 through 2 November 2017
SP  - 349
EP  - 362
ER  - 
TY  - JOUR
A1  - Dikta, Gerhard
T1  - Semi-parametric random censorship models
JF  - From Statistics to Mathematical Finance : Festschrift in Honour of Winfried Stute
Y1  - 2017
SN  - 978-3-319-50986-0
U6  - http://dx.doi.org/10.1007/978-3-319-50986-0_3
SP  - 43
EP  - 56
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Schopp, Christoph
A1  - Heuermann, Holger
A1  - Marso, Michel
T1  - Multiphysical Study of an Atmospheric Microwave Argon Plasma Jet
T2  - IEEE Transactions on Plasma Science
Y1  - 2017
U6  - http://dx.doi.org/10.1109/TPS.2017.2692735
SN  - 1939-9375
VL  - 45
IS  - 6
SP  - 932
EP  - 937
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Wilke, Thomas
T1  - Newly found plans for the chapel of the Holy Shroud
JF  - Studi Piemontesi
Y1  - 2017
SN  - 0392-7261
VL  - XLVI
IS  - 1
SP  - 75
EP  - 85
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Hendrick, P.
T1  - Experimental Evaluation of the Pollutant and Noise Emissions of the GTCP 36-300 Gas Turbine Operated with Kerosene and a Low NOX Micromix Hydrogen Combustor
T2  - 7th European Conference for Aeronautics and Space Sciences, EUCASS 2017
Y1  - 2017
U6  - http://dx.doi.org/10.13009/EUCASS2017-125
ER  - 
TY  - JOUR
A1  - Liu, Z.
A1  - Schaap, K. S.
A1  - Ballemans, L.
A1  - de Blois, E.
A1  - Rohde, M.
A1  - Paulßen, Elisabeth
T1  - Measurement of reaction kinetics of [177Lu]Lu-DOTA-TATE using a microfluidic system
JF  - Dalton Transactions
Y1  - 2017
U6  - http://dx.doi.org/10.1039/C7DT01830D
SN  - 1477-9234
VL  - 46
IS  - 42
SP  - 14669
EP  - 14676
ER  - 
TY  - CHAP
A1  - Barnat, Miriam
A1  - Bosse, Elke
A1  - Tight, Malcolm
T1  - The Guiding Role of Theory in Mixed-Methods Research: Combining Individual and Institutional Perspectives on the Transition to Higher Education
T2  - Theory and Method in Higher Education Research. Vol 3
N2  - The methodological discourse of mixed-methods research offers general procedures to combine quantitative and qualitative methods for investigating complex fields of research such as higher education. However, integrating different methods still poses considerable challenges. To move beyond general recommendations for mixed-methods research, this chapter proposes to discuss methodological issues with respect to a particular research domain. Taking current studies on the transition to higher education as an example, the authors first provide an overview of the potentials and limitations of quantitative and qualitative methods in the research domain. Second, they show the need for a conceptual framework grounded in the theory of the research object to guide the integration of different methods and findings. Finally, an example study that investigates transition with regard to the interplay of the individual student and the institutional context serves to illustrate the guiding role of theory. The framework integrates different theoretical perspectives on transition, informs the selection of the research methods, and defines the nexus of the two strands that constitute the mixed-methods design. As the interplay of individual and context is of concern for teaching and learning in general, the example presented may be fruitful for the wider field of higher education research.
KW  - Quantitative research
KW  - Mixed-Methods Research
KW  - Transition
KW  - Students
KW  - Higher education
Y1  - 2017
SN  - 978-1-78743-222-2
U6  - http://dx.doi.org/10.1108/S2056-375220170000003001
SP  - 1
EP  - 19
PB  - Emerald Publishing Limited
ER  - 
TY  - JOUR
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
A1  - Ceriotti, Matteo
T1  - Multiple near-earth asteroid rendezvous mission: Solar-sailing options
JF  - Advances in Space Research
Y1  - 2017
U6  - http://dx.doi.org/10.1016/j.asr.2017.10.017
SN  - 0273-1177
IS  - In Press, Corrected Proof
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Meß, Jan-Gerd
A1  - Biele, Jens
A1  - Seefeldt, Patric
A1  - Dachwald, Bernd
A1  - Spietz, Peter
A1  - Grimm, Christian D.
A1  - Spröwitz, Tom
A1  - Lange, Caroline
A1  - Ulamec, Stephan
T1  - Small spacecraft in small solar system body applications
T2  - IEEE Aerospace Conference 2017, Big Sky, Montana, USA
Y1  - 2017
SN  - 978-1-5090-1613-6
U6  - http://dx.doi.org/10.1109/AERO.2017.7943626
SP  - 1
EP  - 20
ER  - 
TY  - CHAP
A1  - Bung, Daniel B.
A1  - Valero, Daniel
T1  - FlowCV - An open-source toolbox for computer vision applications in turbulent flows
T2  - Proceedings of the 37th IAHR World Congress August 13 – 18, 2017, Kuala Lumpur, Malaysia
Y1  - 2017
SN  - 2521-716X
SP  - 5356
EP  - 5365
ER  - 
TY  - CHAP
A1  - Valero, Daniel
A1  - Bung, Daniel B.
A1  - Erpicum, Sebastien
A1  - Dewals, Benjamin
T1  - Numerical study of turbulent oscillations around a cylinder: RANS capabilities and sensitivity analysis
T2  - Proceedings of the 37th IAHR World Congress August 13 – 18, 2017, Kuala Lumpur, Malaysia
Y1  - 2017
SN  - 2521-716X
SP  - 3126
EP  - 3135
ER  - 
TY  - JOUR
A1  - Kerpen, Nils B.
A1  - Bung, Daniel B.
A1  - Valero, Daniel
A1  - Schlurmann, Torsten
T1  - Energy dissipation within the wave run-up at stepped revetments
JF  - Journal of Ocean University of China
Y1  - 2017
U6  - http://dx.doi.org/10.1007/s11802-017-3355-z
SN  - 1993-5021
VL  - 16
IS  - 4
SP  - 649
EP  - 654
PB  - Springer
CY  - Berlin
ER  -