TY  - JOUR
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Falk, F.
A1  - Hendrick, P.
T1  - Control system modifications and their effects on the operation of a hydrogen-fueled Auxiliary Power Unit
JF  - XX international symposium on air breathing engines 2011 : ISABE 2011, Gothenburg, Sweden, 12-16 September, 2011. Vol. 2.
Y1  - 2011
SN  - 9781618391803
N1  - 20th International Symposium on Air Breathing Engines 2011 : (ISABE 2011) : Gothenburg, Sweden, 12-16 September, 2011.
SP  - 929
EP  - 938
PB  - American Institute of Aeronautics and Astronautics
CY  - Reston, VA
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Krebs, W.
A1  - Wolf, E.
T1  - Experimental Characterization of Low NOx Micromix Prototype Combustors for Industrial Gas Turbine Applications
JF  - ASME Turbo Expo 2011 ; Vancouver, Canada, June 6-10, 2011
Y1  - 2011
N1  - GT2011-45305
ER  - 
TY  - JOUR
A1  - Funke, Harald
A1  - Recker, E.
A1  - Bosschaerts, W.
A1  - Boonen, Q.
A1  - Börner, Sebastian
T1  - Parametrical study of the „Micromix“ hydrogen combustion principle
JF  - 10th International Symposium on Experimental and Computational Aerothermodynamics of Internal Flows, ISAIF10-049, Brussels, Belgium, 4-7 July 2011
Y1  - 2011
ER  - 
TY  - JOUR
A1  - Esch, Thomas
A1  - Funke, Harald
A1  - Roosen, Peter
A1  - Jarolimek, Ulrich
T1  - Biogenic Vehicle Fuels in General Aviation Aircrafts
JF  - MTZ worldwide. 72 (2011), H. 1
Y1  - 2011
N1  - recherchierbar für Angehörige der FH Aachen
SP  - 38
EP  - 43
PB  - Springer Automotive Media
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Knobloch, V.
A1  - Kowalski, Julia
A1  - Bösiger, P.
A1  - Kozerke, S.
T1  - Probabilistic Streamline Estimation from Accelerated Fourier Velocity Encoded Measurements
T2  - Proceedings of the 19th ISMRM International Society for Magnetic Resonance in Medicine
Y1  - 2011
N1  - ISMRM 19th Annual Meeting & Exhibition in Montréal, Québec, Canada
SP  - 1215
EP  - 1215
ER  - 
TY  - JOUR
A1  - Bühler, Yves
A1  - Christen, Marc
A1  - Kowalski, Julia
A1  - Bartelt, Perry
T1  - Sensitivity of snow avalanche simulations to digital elevation model quality and resolution
JF  - Annals of Glaciology
N2  - Digital elevation models (DEMs), represent the three-dimensional terrain and are the basic input for numerical snow avalanche dynamics simulations. DEMs can be acquired using topographic maps or remote-sensing technologies, such as photogrammetry or lidar. Depending on the acquisition technique, different spatial resolutions and qualities are achieved. However, there is a lack of studies that investigate the sensitivity of snow avalanche simulation algorithms to the quality and resolution of DEMs. Here, we perform calculations using the numerical avalance dynamics model RAMMS, varying the quality and spatial resolution of the underlying DEMs, while holding the simulation parameters constant. We study both channelized and open-terrain avalanche tracks with variable roughness. To quantify the variance of these simulations, we use well-documented large-scale avalanche events from Davos, Switzerland (winter 2007/08), and from our large-scale avalanche test site, Valĺee de la Sionne (winter 2005/06). We find that the DEM resolution and quality is critical for modeled flow paths, run-out distances, deposits, velocities and impact pressures. Although a spatial resolution of ~25 m is sufficient for large-scale avalanche modeling, the DEM datasets must be checked carefully for anomalies and artifacts before using them for dynamics calculations.
KW  - snow
KW  - avalanche
Y1  - 2011
SN  - 1727-5644
VL  - 52
IS  - 58
SP  - 72
EP  - 80
PB  - Cambridge University Press
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Fluid Transport in Porous Media probed by Relaxation-Exchange NMR
T2  - 2011 Fall Meeting, AGU, San Francisco, Calif., 5-9 Dec.
Y1  - 2011
N1  - H12B-07; American Geophysical Union
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Modification and testing of an engine and fuel control system for a hydrogen fuelled gas turbine
T2  - Progress in Propulsion Physics. Vol. 2
Y1  - 2011
SN  - 978-2-7598-0673-7
SP  - 475
EP  - 486
PB  - EDP Sciences
CY  - Les Ulis
ER  - 
TY  - CHAP
A1  - Dahmann, Peter
T1  - Stemme S10 VTX als multifunktionales Forschungsflugzeug
T2  - Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband
Y1  - 2011
SN  - 978-3-9321-8274-7
SP  - 357
EP  - 364
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Thenent, N. E.
A1  - Dahmann, Peter
T1  - Increasing aircraft design flexibility ‐ The development of a hydrostatic transmission for gliders with self‐launching capability
T2  - Deutscher Luft- und Raumfahrtkongress 2011 : Bremen, 27. bis 29. September 2011 ; Tagungsband
Y1  - 2011
SN  - 978-3-9321-8274-7
SP  - 865
EP  - 883
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Thenent, N. E.
A1  - Dahmann, Peter
T1  - Hydrostatic propeller drive
T2  - Proceedings of the conference : 18 - 20 May, 2011 Tampere, Finland / the Twelth Scandinavian International Conference on Fluid Power, SICFP'11. Ed.: Harri Sairiala ... Vol. 1
Y1  - 2011
SN  - 978-952-15-2517-9
SP  - 217
EP  - 227
CY  - Tampere
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Verbrennungstechnik : Vorlesungsumdruck. 8. Aufl.
Y1  - 2011
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Lao, B.
A1  - Bührig-Polaczek, A.
A1  - Röth, Thilo
ED  - Wielage, Bernhard
T1  - Funktionsintegrierte Leichtbaustrukturen in gussintensiver Metall-Hybridbauweise
T2  - Verbundwerkstoffe und Werkstoffverbunde: Tagungsband zum 18. Symposium ; 30.03.2011 bis 01.04.2011, Chemnitz
Y1  - 2011
SN  - 978-3-00-033801-4
N1  - Schriftenreihe Werkstoffe und werkstofftechnische Anwendungen ; 41
SP  - 413
EP  - 421
PB  - Eigenverlag
CY  - Chemnitz
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Xu, Changsheng
A1  - Feldmann, Marco
A1  - Plescher, Engelbert
T1  - IceMole : Development of a novel subsurface ice probe and testing of the first prototype on the Morteratsch Glacier
T2  - EGU General Assembly 2011 Vienna | Austria | 03 – 08 April 2011
N2  - We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named “IceMole”, is currently developed, built, and tested at the FH Aachen University of Applied Sciences’ Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Loeb, Horst W.
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Seboldt, Wolfgang
T1  - An Interstellar – Heliopause mission using a combination of solar/radioisotope electric propulsion
T2  - Presented at the 32nd International Electric Propulsion Conference
N2  - There is common agreement within the scientific community that in order to understand our local galactic environment it will be necessary to send a spacecraft into the region beyond the solar wind termination shock. Considering distances of 200 AU for a new mission, one needs a spacecraft travelling at a speed of close to 10 AU/yr in order to keep the mission duration in the range of less than 25 yrs, a transfer time postulated by ESA.Two propulsion options for the mission have been proposed and discussed so far: the solar sail propulsion and the ballistic/radioisotope electric propulsion. As a further alternative, we here investigate a combination of solar-electric propulsion and radioisotope-electric propulsion. The solar-electric propulsion stage consists of six 22 cm diameter “RIT-22”ion thrusters working with a high specific impulse of 7377 s corresponding to a positive grid voltage of 5 kV. Solar power of 53 kW BOM is provided by a light-weight solar array. The REP-stage consists of four space-proven 10 cm diameter “RIT-10” ion thrusters that will be operating one after the other for 9 yrs in total. Four advanced radioisotope generators provide 648 W at BOM. The scientific instrument package is oriented at earlier studies. For its mass and electric power requirement 35 kg and 35 W are assessed, respectively. Optimized trajectory calculations, treated in a separate contribution, are based on our “InTrance” method.The program yields a burn out of the REP stage in a distance of 79.6 AU for a usage of 154 kg of Xe propellant. With a C3 = 45,1 (km/s)2 a heliocentric probe velocity of 10 AU/yr is reached at this distance, provided a close Jupiter gravity assist adds a velocity increment of 2.7 AU/yr. A transfer time of 23.8 yrs results for this scenario requiring about 450 kg Xe for the SEP stage, jettisoned at 3 AU. We interpret the SEP/REP propulsion as a competing alternative to solar sail and ballistic/REP propulsion. Omiting a Jupiter fly-by even allows more launch flexibility, leaving the mission duration in the range of the ESA specification.
Y1  - 2011
N1  - 32nd International Electric Propulsion Conference, 11-15 September. Wiesbaden, Germany
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
A1  - Schartner, Karl-Heinz
T1  - Flight times to the heliopause using a combination of solar and radioisotope electric propulsion
T2  - 32nd International Electric Propulsion Conference
N2  - We investigate the interplanetary flight of a low-thrust space probe to the heliopause,located at a distance of about 200 AU from the Sun. Our goal was to reach this distance within the 25 years postulated by ESA for such a mission (which is less ambitious than the 15-year goal set by NASA). Contrary to solar sail concepts and combinations of allistic and electrically propelled flight legs, we have investigated whether the set flight time limit could also be kept with a combination of solar-electric propulsion and a second, RTG-powered upper stage. The used ion engine type was the RIT-22 for the first stage and the RIT-10 for the second stage. Trajectory optimization was carried out with the low-thrust optimization program InTrance, which implements the method of Evolutionary Neurocontrol,using Artificial Neural Networks for spacecraft steering and Evolutionary Algorithms to optimize the Neural Networks’ parameter set. Based on a parameter space study, in which the number of thrust units, the unit’s specific impulse, and the relative size of the solar power generator were varied, we have chosen one configuration as reference. The transfer time of this reference configuration was 29.6 years and the fastest one, which is technically
more challenging, still required 28.3 years. As all flight times of this parameter study were longer than 25 years, we further shortened the transfer time by applying a launcher-provided hyperbolic excess energy up to 49 km2/s2. The resulting minimal flight time for the reference configuration was then 27.8 years. The following, more precise optimization to a launch with the European Ariane 5 ECA rocket reduced the transfer time to 27.5 years. This is the fastest mission design of our study that is flexible enough to allow a launch every
year. The inclusion of a fly-by at Jupiter finally resulted in a flight time of 23.8 years,which is below the set transfer-time limit. However, compared to the 27.5-year transfer,this mission design has a significantly reduced launch window and mission flexibility if the
escape direction is restricted to the heliosphere’s “nose".
KW  - low-thrust trajectory optimization
KW  - heliosphere
KW  - ion propulsion
Y1  - 2011
N1  - IEPC-2011-051
32nd International Electric Propulsion Conference,September 11–15, 2011
Wiesbaden, Germany
SP  - 1
EP  - 12
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektronik im Kraftfahrzeug : Innovationen bei System und Komponenten ; mit 7 Tabellen / Hrsg.: Schmitz, Günter
Y1  - 2012
SN  - 978-3-8169-3110-2
N1  - Haus der Technik ; Bd. 123
PB  - expert-Verl.
CY  - Renningen
ER  - 
TY  - GEN
A1  - Baumgartner, Thomas
A1  - Wunderlich, Florian
A1  - Jaunich, Arthur
A1  - Sato, Tomoo
A1  - Bundy, Georg
A1  - Grießmann, Nadine
A1  - Kowalski, Julia
A1  - Burghardt, Stefan
A1  - Hanebrink, Jörg
T1  - Lighting the way: Perspectives on the global lighting market
Y1  - 2012
CY  - McKinsey
ET  - 2nd ed.
ER  - 
TY  - JOUR
A1  - Olaru, Alexandra Maria
A1  - Kowalski, Julia
A1  - Sethi, Vaishali
A1  - Blümich, Bernhard
T1  - Exchange relaxometry of flow at small Péclet numbers in a glass bead pack
JF  - Journal of Magnetic Resonance (JMR)
N2  - In this paper we consider low Péclet number flow in bead packs. A series of relaxation exchange experiments has been conducted and evaluated by ILT analysis. In the resulting correlation maps, we observed a collapse of the signal and a translation towards smaller relaxation times with increasing flow rates, as well as a signal tilt with respect to the diagonal. In the discussion of the phenomena we present a mathematical theory for relaxation exchange experiments that considers both diffusive and advective transport. We perform simulations based on this theory and discuss them with respect to the conducted experiments.
KW  - NMR exchange relaxometry
KW  - Low-field NMR
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.jmr.2012.04.015
SN  - 1096-0856
VL  - 220
SP  - 32
EP  - 44
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Fischer, Jan-Thomas
A1  - Kowalski, Julia
A1  - Pudasaini, Shiva P.
T1  - Topographic curvature effects in applied avalanche modelling
JF  - Cold Regions Science and Technology
N2  - This paper describes the implementation of topographic curvature effects within the RApid Mass MovementS (RAMMS) snow avalanche simulation toolbox. RAMMS is based on a model similar to shallow water equations with a Coulomb friction relation and the velocity dependent Voellmy drag. It is used for snow avalanche risk assessment in Switzerland. The snow avalanche simulation relies on back calculation of observed avalanches. The calibration of the friction parameters depends on characteristics of the avalanche track. The topographic curvature terms are not yet included in the above mentioned classical model. Here, we fundamentally improve this model by mathematically and physically including the topographic curvature effects. By decomposing the velocity dependent friction into a topography dependent term that accounts for a curvature enhancement in the Coulomb friction, and a topography independent contribution similar to the classical Voellmy drag, we construct a general curvature dependent frictional resistance, and thus propose new extended model equations. With three site-specific examples, we compare the apparent frictional resistance of the new approach, which includes topographic curvature effects, to the classical one. Our simulation results demonstrate substantial effects of the curvature on the flow dynamics e.g., the dynamic pressure distribution along the slope. The comparison of resistance coefficients between the two models demonstrates that the physically based extension presents an improvement to the classical approach. Furthermore a practical example highlights its influence on the pressure outline in the run out zone of the avalanche. Snow avalanche dynamics modeling natural terrain curvature centrifugal force friction coefficients.
KW  - Snow
KW  - Avalanche
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.coldregions.2012.01.005
SN  - 1872-7441
VL  - 74-75
SP  - 21
EP  - 30
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - BOOK
A1  - Janser, Frank
A1  - Havermann, Marc
T1  - Inkompressible Strömungen
Y1  - 2012
SN  - 978-3-86130-446-3
N1  - Strömungslehre und Aerodynamik
PB  - Mainz
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Kusterer, K.
A1  - Kroninger, D.
A1  - Kitajima, J.
A1  - Kazari, M.
A1  - Horikama, A.
T1  - Numerical and experimental characterization of low NOx Micromix combustion principle for industrial hydrogen gas turbine applications
T2  - Proceedings of ASME Turbo Expo 2012
Y1  - 2013
N1  - ASME Turbo Expo 2012, GT2012, June 11-15, 2012, Copenhagen, Denmark
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Keinz, Jan
A1  - Hendrick, P.
A1  - Recker, E.
T1  - Low NOx Hydrogen combustion chamber for industrial gas turbine applications“, 14th International Symposium on Transport Phenomena and Dynamics of Rotating Machinery
T2  - ISROMAC-14 : the Forteenth International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; Honolulu, Hawaii, February 27 - March 02nd, 2012
Y1  - 2012
N1  - International Symposium on Transport Phenomena and Dynamics of Rotating Machinery ; (14 ; 2012.02.27-03.02 ; Honolulu, Hawaii)
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 2. Aufl. Bd. 2
Y1  - 2012
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Konstantinidis, K.
A1  - Forstner, R.
T1  - Enceladus explorer - A maneuverable subsurface probe for autonomous navigation through deep ice
T2  - 63rd International Astronautical Congress 2012, IAC 2012; Naples; Italy; 1 October 2012 through 5 October 2012. (Proceedings of the International Astronautical Congress, IAC ; 3)
Y1  - 2012
SN  - 978-1-62276-979-7
SP  - 1756
EP  - 1766
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - PAT
A1  - Bagheri, Mohsen
A1  - Dahmann, Peter
T1  - Kletterroboter mit Gurtantrieb international [Offenlegungsschrift]
T1  - Climbing robot for masts [Europäische Patentanmeldung / Internationale Patentanmeldung / US Patentanmeldung]
Y1  - 2012
SP  - 1
EP  - 20
PB  - Deutsches Patentamt / Europäisches Patentamt / WIPO / USPTO
CY  - München / Den Hague / Genf / Alexandria, Virginia
ER  - 
TY  - CHAP
A1  - Borggrafe, Andreas
A1  - Ohndorf, Andreas
A1  - Dachwald, Bernd
A1  - Seboldt, Wolfgang
T1  - Analysis of interplanetary solar sail trajectories with attitude dynamics
T2  - Dynamics and Control of Space Systems 2012
N2  - We present a new approach to the problem of optimal control of solar sails for low-thrust trajectory optimization. The objective was to find the required control torque magnitudes in order to steer a solar sail in interplanetary space. A new steering strategy, controlling the solar sail with generic torques applied about the spacecraft body axes, is integrated into the existing low-thrust trajectory optimization software InTrance. This software combines artificial neural networks and evolutionary algorithms to find steering strategies close to the global optimum without an initial guess. Furthermore, we implement a three rotational degree-of-freedom rigid-body attitude dynamics model to represent the solar sail in space. Two interplanetary transfers to Mars and Neptune are chosen to represent typical future solar sail mission scenarios. The results found with the new steering strategy are compared to the existing reference trajectories without attitude dynamics. The resulting control torques required to accomplish the missions are investigated, as they pose the primary requirements to a real on-board attitude control system.
Y1  - 2012
SN  - 978-0-87703-587-9
SP  - 1553
EP  - 1569
PB  - Univelt Inc
CY  - San Diego
ER  - 
TY  - JOUR
A1  - Loeb, Horst Wolfgang
A1  - Schartner, Karl-Heinz
A1  - Dachwald, Bernd
A1  - Ohndorf, Andreas
A1  - Seboldt, Wolfgang
T1  - Interstellar heliopause probe
JF  - Труды МАИ
N2  - There is common agreement within the scientific community that in order to understand our local galactic environment it will be necessary to send a spacecraft into the region beyond the solar wind termination shock. Considering distances of 200 AU for a new mission, one needs a spacecraft traveling at a speed of close to 10 AU/yr in order to keep the mission duration in the range of less than 25 yrs, a transfer time postulated by European Space Agency (ESA). Two propulsion options for the mission have been proposed and discussed so far: the solar sail propulsion and the ballistic/radioisotope-electric propulsion (REP). As a further alternative, we here investigate a combination of solar-electric propulsion (SEP) and REP. The SEP stage consists of six 22-cms diameter RIT-22 ion thrusters working with a high specific impulse of 7377 s corresponding to a positive grid voltage of 5 kV. Solar power of 53 kW at begin of mission (BOM) is provided by a lightweight solar array.
Y1  - 2012
IS  - 60
SP  - 2
EP  - 2
PB  - Moskauer Staatliches Luftfahrtinstitut (МАИ)
CY  - Moskau
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Börner, Sebastian
A1  - Hendrick, P.
A1  - Recker, E.
A1  - Elsing, R.
ED  - DeLuca, Luigi T.
T1  - Development and integration of a scalable low NOx combustion chamber for a hydrogen fuelled aero gas turbine
T2  - Progress in Propulsion Physics. - Vol. 4
Y1  - 2013
SN  - 978-2-7598-0876-2
U6  - http://dx.doi.org/10.1051/eucass/201304357
N1  - 4th European Conference for Aero-Space Sciences : July 4 - 8, 2011, St Petersburg, Russia ; EUCASS <4, 2011, St. Petersburg>
SP  - 357
EP  - 372
PB  - EDP Sciences
CY  - [Les Ulis]
ER  - 
TY  - JOUR
A1  - Kowalski, Julia
A1  - McElwaine, Jim N.
T1  - Shallow two-component gravity-driven flows with vertical variation
JF  - Journal of Fluid Mechanics
Y1  - 2013
SN  - 0022-1120
VL  - 714
SP  - 434
EP  - 462
PB  - Cambridge Univ. Press
CY  - Cambridge
ER  - 
TY  - CHAP
A1  - Röth, Thilo
A1  - Kampker, Achim
A1  - Reisgen, Uwe
A1  - Hameyer, Kay
A1  - De Doncker, R. W.
T1  - Entwicklung von elektrofahrzeugspezifischen Systemen
T2  - Elektromobilität : Grundlagen einer Zukunftstechnologie
N2  - Die Fahrzeugkarosserie bildet als größte funktionale und organisatorische Systemeinheit ein zentrales Kompetenzfeld der OEMs. Für den Fahrzeughersteller stellt der Karosserierohbau eine hohe Kernkompetenz sowohl in der Produktentwicklung als auch in der Produktion dar. Neue, innovative Karosseriebauweisen, bspw. aufgrund eines neuen Fahrzeugkonzeptes oder neuer Anforderungen, bedeuten für den OEM auch gleichzeitig die intensive Auseinandersetzung mit Kompetenzfokussierung bzw. Wertschöpfungsverlagerungen.
Y1  - 2013
SN  - 978-3-642-31986-0
SP  - 235
EP  - 336
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Janser, Frank
T1  - Zukunftssicherung im Mittelstand - Kooperation zwischen der Stacke Tresorbau GmbH und der Fachhochschule Aachen
T2  - Innovation durch Kooperation : wie der Mittelstand durch Zusammenarbeit mit den Hochschulen seine Wettbewerbsfähigkeit steigert : Festschrift für Prof. Dr. rer. nat. Johannes Gartzen / Thomas Gartzen, Ute Gartzen (Hrsg.)
Y1  - 2013
SN  - 978-3-86359-136-6
SP  - 179
EP  - 183
PB  - Apprimus Verlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Ulamec, Stephan
A1  - Biele, Jens
T1  - Clean in situ subsurface exploration of icy environments in the solar system
T2  - Habitability of other planets and satellites. - (Cellular origin, life in extreme habitats and astrobiology ; 28)
N2  - "To assess the habitability of the icy environments in the solar system, for example, on Mars, Europa, and Enceladus, the scientific analysis of material embedded in or underneath their ice layers is very important. We consider self-steering robotic ice melting probes to be the best method to cleanly access these environments, that is, in compliance with planetary protection standards. The required technologies are currently developed and tested."
Y1  - 2013
SN  - 978-94-007-6545-0 (Druckausgabe)
SN  - 978-94-007-6546-7 (E-Book)
SP  - 367
EP  - 397
PB  - Springer
CY  - Dordrecht
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektrotechnik für Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Hauptbd.: Gleichspannungstechnik, Wechselspannungstechnik, Elektrische Maschinen
Y1  - 2013
SN  - 978-1-481830-60-7
PB  - Schmitz
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Schmitz, Günter
T1  - Elektrotechnik für Ingenieurstudenten nichtelektrotechnischer Fachrichtungen. Aufgabensammlung, [Übungs- und Klausuraufgaben]
Y1  - 2013
SN  - 978-1-482721-47-8
PB  - Schmitz
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Appel, Wolfgang
A1  - Brähler, Hermann
A1  - Breuer, Stefan
A1  - Dahlhaus, Ulrich
A1  - Esch, Thomas
A1  - Hoepke, Erich
A1  - Kopp, Stephan
A1  - Rhein, Bernd
T1  - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 7., überarb. u. erw. Aufl.
Y1  - 2013
SN  - 978-3-8348-2224-6
PB  - Vieweg + Teubner
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Hoefling, J.
A1  - Schirra, Julian
A1  - Spohr, A.
A1  - Schäfer, D.
T1  - Induced drag computation with wake model schemes for highly non-planar wing systems
T2  - Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart
Y1  - 2013
SP  - 1
EP  - 10
PB  - Dt. Ges. für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - JOUR
A1  - Krämer, Stefan
A1  - Daab, Dominique Jonas
A1  - Müller, Brigitte
A1  - Wagner, Tobias
A1  - Baader, Fabian
A1  - Hessel, Joana
A1  - Gdalewitsch, Georg
A1  - Plescher, Engelbert
A1  - Dachwald, Bernd
A1  - Wahle, Michael
A1  - Gierse, Andreas
A1  - Vetter, Rudolf
A1  - Pfützenreuter, Lysan
T1  - Development and flight-testing of a system to isolate vibrations for microgravity experiments on sounding rockets
JF  - 21st ESA Symposium on Rocket and Balloon Research
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Spohr, A.
A1  - Schirra, Julian
A1  - Hoefling, J.
A1  - Schedl, A.
T1  - Wing weight estimation methodology for highly non-planar lifting systems during conceptual design
T2  - Deutscher Luft- und Raumfahrtkongress 2013 : 10.9. - 12.9.2013, Stuttgart
Y1  - 2013
SP  - Publ. online
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Börner, Sebastian
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Tekin, N.
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
ED  - Song, Seung Jin
T1  - Experimental and numerical characterization of the dry low NOx micromix hydrogen combustion principle at increased energy density for industrial hydrogen gas turbine applications
T2  - Combustion, fuels and emissions : proceedings of the ASME Turbo Expo: Turbine Technical Conference and Exposition - 2013 ; June 3 - 7, 2013, San Antonio, Texas, USA ; vol. 1
Y1  - 2013
SN  - 978-0-7918-5510-2
N1  - Paper No: GT2013-94771
SP  - V001T04A055
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - J., Watmuff
T1  - Euler-based induced drag estimation for highly non-planar lifting systems during conceptional design
T2  - 62. Deutscher Luft- und Raumfahrtkongress 2013 : 10. - 12. September 2032, Stuttgart, Haus der Wirtschaft
Y1  - 2013
SP  - 1
EP  - 8
PB  - Dt. Gesellschaft für Luft- und Raumfahrt
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Konstantinidis, K.
A1  - Dachwald, Bernd
A1  - Ohndorf, A.
A1  - Dykta, P.
A1  - Voigt, K.
A1  - Förstner, R.
T1  - Enceladus explorer (ENEX): A lander mission to probe subglacial water pockets on Saturn's moon enceladus for life
T2  - 64th International Astronautical Congress 2013 (IAC 2013) : Beijing, China, 23 - 27 September 2013. (Proceedings of the International Astronautical Congress, IAC ; 2)
Y1  - 2013
SN  - 978-1-62993-909-4
SP  - 1340
EP  - 1350
PB  - Curran
CY  - Red Hook, NY
ER  - 
TY  - RPRT
A1  - Esch, Thomas
A1  - Eickmann, Matthias
A1  - Coussement, Axel
A1  - Kalbhenn, Hartmut
T1  - Wasserstoffspezifische Abstimmung der Ladungswechselvorgänge eines Verbrennungsmotors mit Direkteinblasung : Schlussbericht für das Forschungsvorhaben ; Kurztitel: HydI - Hydrogen direct injection ; Förderperiode 01.07.2008 - 31.12.2011 / FH Aachen, Thermodynamik und Verbrennungstechnik
KW  - Wasserstoff
KW  - Direkteinblasung
KW  - vollvariabler Ventilbetrieb
KW  - Verbrennungsmotor
KW  - Ladungswechsel
Y1  - 2013
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Benkö, Marietta
A1  - Plescher, Engelbert
T1  - Space law: reconsidering the definition/delimitation question and the passage of spacecraft through foreign airspace. (Essential air and space law ; 12)
Y1  - 2013
SN  - 9789462360761 ; 9462360766  ; 9789460948176
PB  - Eleven International Publishing
CY  - The Hague
ER  - 
TY  - THES
A1  - Börner, Sebastian
T1  - Optimization and testing of a low NOx hydrogen fuelled gas turbine
Y1  - 2013
N1  - Zugl.: Bruxelles, Université libre, Diss., 2013
PB  - Université Libre de Bruxelles
CY  - Bruxelles
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 2. Aufl. Bd. 1
Y1  - 2013
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 2. Aufl.
ER  - 
TY  - BOOK
A1  - Esch, Thomas
T1  - Verbrennungsmotoren
Y1  - 2013
PB  - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik
CY  - Aachen
ET  - 10. Aufl., [Umdruck]
ER  - 
TY  - JOUR
A1  - Bindal, Gaurav
A1  - Sharma, Sparsh
A1  - Janser, Frank
A1  - Neu, Eugen
T1  - Detailed analysis of variables affecting wing kinematics of bat flight
JF  - SAE International Journal of Aerospace
Y1  - 2013
U6  - http://dx.doi.org/10.4271/2013-01-9003
SN  - 1946-3901
VL  - 6
IS  - 2
SP  - 811
EP  - 818
ER  - 
TY  - PAT
A1  - Bagheri, Mohsen
T1  - Mobile Wartungshalle für Kletterroboter für Masten [Europäische Patentanmeldung]
Y1  - 2013
SP  - 1
EP  - 19
PB  - Europäisches Patentamt
CY  - Den Hague
ER  - 
TY  - JOUR
A1  - Weihe, Stefan
A1  - Ernst, Ansgar
A1  - Röth, Thilo
A1  - Proksch, Johannes
T1  - Aluminium-Stahl-Verbundguss im Nutzfahrzeugbau
JF  - ATZ - Automobiltechnische Zeitschrift
N2  - In modernen Fahrzeugkarosserien der Großserie kommen zunehmend Materialmischbauweisen zur Anwendung. In Zusammenarbeit der Daimler AG, der Tower Automotive Holding GmbH, der Imperia GmbH sowie der Partnerunternehmen KSM Castings GmbH und Schaufler Tooling GmbH & Co. KG wird das Leichtbaupotenzial von Aluminiumverbundguss-Stahlblech-Hybriden am Beispiel des vorderen Dachquerträgers des Mercedes-Benz Viano/Vito ausführlich untersucht.
Y1  - 2013
SN  - 2192-8800 (Online)
SN  - 0001-2785 (Print)
VL  - 115
IS  - 4
SP  - 312
EP  - 316
PB  - Springer Fachmedien Wiesbaden
ER  -