TY  - CHAP
A1  - Goldbach, Daniel
T1  - Management der funktionalen Sicherheit einer Entwicklung eines sicherheitskritischen Systems im Bereich Nutzfahrzeuge
T2  - Commercial vehicle technology 2010 : proceedings of the 1st Commercial Vehicle Technology Symposium (CVT 2010), March 16 - 18, 2010, Kaiserslautern / K. Berns ... (ed.)
Y1  - 2010
SN  - 978-3-8322-9040-5
SP  - 487
EP  - 495
PB  - Shaker
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Goldbach, Daniel
T1  - Fahrstabilitätserhöhung bei Gespannen durch Querverschiebung des Anhängerkupplungspunktes
JF  - mechatronik mobil
Y1  - 2010
SN  - 1867-7371
VL  - 2
IS  - 1
SP  - 23
EP  - 29
PB  - Expert Verlag
CY  - Renningen
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Schmidt, A.
A1  - Rossiter, E.
A1  - Loose, T.
T1  - Durchgängige Schweißsimulation der Eigenspannung und des Gefügezustands auf Basis realer Schweißstromquellenparameter
T2  - DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des Rührreibschweißens in Fertigungsprozessketten" ; Vorträge der Veranstaltung in Nürnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)
Y1  - 2010
SN  - 978-3-87155-592-3
SP  - 37
EP  - 42
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Pomp, Stefan
A1  - Schwarzbözl, Peter
A1  - Koll, Gerrit
A1  - Hennecke, Klaus
A1  - Schmitz, Mark
A1  - Hoffschmidt, Bernhard
T1  - Advanced concept for a solar thermal power plant with open volumetric air receiver
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 97
EP  - 98
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Schwarzbözl, Peter
A1  - Pomp, Stefan
A1  - Koll, Gerrit
A1  - Hennecke, Klaus
A1  - Hartz, Thomas
A1  - Schmitz, Mark
A1  - Hoffschmidt, Bernhard
T1  - The solar tower Jülich - first operational experiences and test results
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 8
EP  - 9
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Buck, R.
A1  - Wurmhöringer, K.
A1  - Lehle, R.
A1  - Pfahl, A.
A1  - Göttsche, Joachim
A1  - Meyr, T.
T1  - Development of a 30m2 heliostat with hydraulic drive
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 74
EP  - 75
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
A1  - Rau, Christoph
A1  - Schmitz, M.
A1  - Schwarzbözl, P.
A1  - Pomp, Stefan
T1  - Simulation results for a hybridized operation of a gas turbine or a burner for a small solar tower power plant
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 82
EP  - 83
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Baumann, T.
A1  - Teixeira Boura, Cristiano José
A1  - Göttsche, Joachim
A1  - Hoffschmidt, Bernhard
A1  - O'Connell, B.
A1  - Schmitz, S.
A1  - Zunft, S.
T1  - Air/Sand heat exchanger design and materials for solar thermal power plant applications
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 146
EP  - 147
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Fricke, Barbara
A1  - Hoffschmidt, Bernhard
T1  - Ecobalance of a solar thermal tower power plant with volumetric receiver
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 87
EP  - 88
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Ziolko, C.
A1  - Schmitz, M.
A1  - Sattler, Johannes, Christoph
A1  - Khedim, Ahmed
A1  - Hoffschmidt, Bernhard
T1  - AlSol - the open volumetric receiver technology moves to Africa
T2  - SolarPACES 2010 : the CSP Conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 93
EP  - 94
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
A1  - Rusack, Markus
A1  - Schwarzer, Klemens
T1  - Low effort measurement method of PTC-efficiency
T2  - SolarPACES 2010 : the CSP conference: electricity, fuels and clean water from concentrated solar energy ; 21 to 24 September 2010, Perpignan, France
Y1  - 2010
SP  - 48
EP  - 49
PB  - Soc. OSC
CY  - Saint Maur
ER  - 
TY  - JOUR
A1  - Harms, Alexander
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schiebahn, Alexander
A1  - Thiele, Regina
T1  - Herausforderungen an die Fügetechnik: Leichtbau und Kosteneffizienz beim Elektrofahrzeug
JF  - Elektromobilität made in Aachen. (RWTH-Themen : Berichte aus der Rheinisch-Westfälischen Technischen Hochschule Aachen ; Ausg. 2010, 2)
Y1  - 2010
SN  - 0179-079X
SP  - 58
EP  - 60
ER  - 
TY  - JOUR
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Abdurakhmanov, Aydemir
T1  - Characterization and modelling techniques for gas metal arc welding of DP 600 sheet steels
JF  - Materialwissenschaft und Werkstofftechnik
N2  - The objectives of the present work are to characterize the Gas Metal Arc Welding process of DP 600 sheet steel and to summarize the modelling techniques. The time-temperature evolution during the welding cycle was measured experimentally and modelled with the softwaretool SimWeld. To model the phase transformations during the welding cycle dilatometer tests were done to quantify the parameters for phase field modelling by MICRESS®. The important input parameters are interface mobility, nucleation density, etc. A contribution was made to include austenite to bainite transformation in MICRESS®. This is useful to predict the microstructure in the fast cooling segments. The phase transformation model is capable to predict the microstructure along the heating and cooling cycles of welding. Tensile tests have shown the evidence of failure at the heat affected zone, which has the ferrite-tempered martensite microstructure.
Y1  - 2010
U6  - http://dx.doi.org/10.1002/mawe.201000692
SN  - 1521-4052
VL  - 41
IS  - 11
SP  - 972
EP  - 983
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Keil, Allessandra
ED  - Brameshuber, Wolfgang
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - Textile reinforced concrete : 2nd ICTRC : International RILEM Conference on Material Science : Aachen Germany, September 6 - 8, 2010. Vol. 1. (RILEM Proceedings PRO ;  75)
Y1  - 2010
SN  - 978-2-35158-106-3
SP  - 153
EP  - 162
PB  - RILEM Publ.
CY  - Bagneux
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Stieglitz, Anja
T1  - Kleben in anspruchsvollen Anwendungsbereichen
T2  - Jahrbuch Schweißtechnik 2011
Y1  - 2010
SN  - 0935-0292
SP  - 226
EP  - 235
PB  - DVS
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Uni- and bi-axial deformation behavior of laser welded advanced high strength steel sheets
JF  - Journal of materials processing technology
N2  - Bead-on-plate butt joints of 2.5 mm hot rolled DP600/DP600 and 1.2 mm cold rolled TRIP700/TRIP700 steel sheets were performed using 6 kW CO2 laser beam welding. The welding speed ranged from 1.5 to 3.0 and from 2.1 to 3.9 m/min in DP/DP and TRIP/TRIP steel weldments respectively. A top surface helium gas was used as a shielding gas at a flow rate of 20 l/min. Metallographic examinations and transverse tensile testing (DIN EN 895: 1995) were carried out to characterize the weldments. The formability of base metals and weldments were investigated by standard Erichsen test (DIN EN ISO 20482). It was found that the uniaxial plastic behavior of both DP600 and TRIP700 base metals was in agreement with Swift and modified Mecking–Kocks models respectively. In a perpendicular tensile test to the weld line, all specimens were fractured at the base metal however the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of both DP/DP and TRIP/TRIP steel weldments and the formability has been improved with the increase of the welding speed.
Y1  - 2010
U6  - http://dx.doi.org/http10.1016/j.jmatprotec.2010.08.003
SN  - 0924-0136
VL  - 210
IS  - 15
SP  - 2188
EP  - 2196
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Harms, Alexander
A1  - Schiebahn, Alexander
T1  - Konduktiv unterstütztes Rührreibschweißen an Stahl- und Aluminiumwerkstoffen
T2  - DVS congress 2010 : Große Schweißtechnische Tagung ; Studentenkongress ; Statusseminar "Schneidtechnik" ; Abschlusskolloquium zum AiF-Forschungscluster "Integration des Rührreibschweißens in Fertigungsprozessketten" ; Vorträge der Veranstaltung in Nürnberg am 27. und 28. September 2010. (DVS-Berichte ; 267)
Y1  - 2010
SN  - 978-3-87155-592-3
SP  - 394
EP  - 398
PB  - DVS Media
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schiebahn, Alexander
A1  - Harms, Alexander
T1  - Einfluss der Maschineneigenschaften beim Widerstandspunktschweißen mit Schweißzangen
T2  - Treffpunkt Widerstandsschweißen : Vorträge der gleichnamigen Sondertagung in Duisburg am 05. und 06. Mai 2010 ; [21. DVS-Sondertagung Widerstandsschweissen 2010 ; Tagungsband]
Y1  - 2010
SP  - 147
EP  - 149
PB  - GSI SLV Duisburg
CY  - Duisburg
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Shielding gas influences on laser weldability of tailored blanks of advanced automotive steels
JF  - Applied surface science
N2  - The effects of shielding gas types and flow rates on CO2 laser weldability of DP600/TRIP700 steel sheets were studied in this work. The evaluated shielding gases were helium (He), argon (Ar) and different mixtures of He and Ar. Weld penetration, tensile strength and formability (Erichsen test) of laser welds were found to be strongly dependent upon the shielding gas types. The ability of shielding gas in removing plasma plume and thus increasing weld penetration is believed to be closely related to ionization potential and atomic weight which determine the period of plasma formation and disappearance. It was found that the higher helium shielding gas flow rate, the deeper weld penetration and the lower weld width.
Y1  - 2010
U6  - http://dx.doi.org/10.1016/j.apsusc.2010.08.042
SN  - 0169-4332 (E-Journal); 0169-4332 (Print)
VL  - 257
IS  - 5
SP  - 1401
EP  - 1406
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Ahmed, Essam
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
T1  - On formability of tailor laser welded blanks of DP/TRIP steel sheets
JF  - Science and technology of welding and joining
N2  - This paper aims to evaluate the formability of tailor welded blanks of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets. In this work, bead on plate butt joints of 2·5 mm DP600 and 1·2 mm TRIP700 steel sheets were performed using CO2 laser beam welding. Microhardness measurements and transverse tensile testing were carried out to characterise the welds. The formability of base metals and welds were investigated by standard Erichsen test. In a perpendicular tensile test to the weld line, all specimens were fractured at the TRIP base metal, and the strengths were somewhat higher than those of base metal. There was a significant reduction in formability caused by welding of the DP600/TRIP700 steel sheets, and the formability increased with increasing welding speed.
Y1  - 2010
U6  - http://dx.doi.org/10.1179/136217110X12731414739754
SN  - 1743-2936
VL  - 15
IS  - 5
SP  - 337
EP  - 342
PB  - Maney
CY  - Leeds
ER  - 
TY  - CHAP
A1  - Schoene, Jens
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
ED  - Fisher, Gregor
T1  - Theoretical and experimental investigations on textile-reinforced concrete spalling behavior
T2  - 8th International PhD Symposium in Civil Engineering : Lyngby, June 20-23, 2010 : proceedings
Y1  - 2010
SN  - 9788778773012
SP  - 383
EP  - 388
PB  - Technical University of Denmark, Dept. of Civil Engineering
CY  - Lyngby
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Jerabek, Jakub
A1  - Chudoba, Rostislav
T1  - Messung der Strahlqualität einer Elektronenstrahlanlage in Umgebungsatmosphäre
JF  - Materialwissenschaft und Werkstofftechnik
N2  - In den letzten Jahrzehnten hat das Elektronenstrahlschweißen, das bereits im größeren Maßstab verwendet wird, seine Fähigkeit als qualitatives Werkzeug für die Verbindung verschiedener Materialen nachgewiesen. Das Non Vacuum Electron Beam Welding (NV-EBW) hat zahlreiche Vorteile im Vergleich zum Elektronenstrahlschweißen im Vakuum, da man unter normalem Atmosphärendruck arbeiten kann. Im Hinblick auf die reproduzierbare Qualität, insbesondere im Bereich der Massen-Fertigung, ist die Kontrolle der Strahlparameter sowie deren Einfluss auf das Schweißergebnis von großer Bedeutung. Durch eine genaue Kenntnis der Strahlkenngrößen wie des Strahldurchmessers und der Leistungsdichteverteilung kann eine Aussage über die sich ausbildende Schweißnaht sowie die Schweißbaddynamik getroffen werden. Messungen der Strahlkenngrößen im Prozess erlauben insbesondere die Untersuchung von Humping-Effekten. In diesem Beitrag wird der Prozess der Elektronenstrahlvermessung unter atmosphärischen Bedingungen beschrieben. Es wird zudem die Abhängigkeit der Elektronenstrahlcharakteristika von den verschiedenen Prozessparametern dargestellt.
Y1  - 2010
SN  - 1521-4052
VL  - 41
IS  - 1
SP  - 45
EP  - 52
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Pak, Daniel
T1  - Fügetechniken für neuartige Bauweisen auf Basis von dünnwandigen Strukturelementen aus textilbewehrtem Beton
T2  - 30. Assistentenseminar Füge- und Schweißtechnik : Vorträge der gleichnamigen Veranstaltung auf der Burg Warberg vom 3. bis 5. September 2009. (DVS-Berichte. 268)
Y1  - 2010
SN  - 978-3-87155-260-1
SP  - 36
EP  - 43
PB  - DVS-Media
CY  - Düsseldorf
ER  - 
TY  - BOOK
A1  - Appel, Wolfgang
A1  - Brähler, Hermann
A1  - Dahlhaus, Ulrich
A1  - Esch, Thomas
A1  - Kopp, Stephan
A1  - Rhein, Bernd
T1  - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 6., überarb. Aufl.
Y1  - 2010
SN  - 978-3-8348-9757-2
PB  - Vieweg + Teubner
CY  - Wiesbaden
ER  - 
TY  - RPRT
A1  - Lanz, Marco
A1  - Fricke, Barbara
A1  - Anthrakidis, Anette
A1  - Genter, Mirjam
A1  - Hoffschmidt, Bernhard
A1  - Faber, Christian
A1  - Hauser, Eva
A1  - Klann, Uwe
A1  - Leprich, Uwe
A1  - Bauknecht, Dierk
A1  - Koch, Matthias
A1  - Peter, Stefan
T1  - CO2-Emissionsminderung durch Ausbau, informationstechnische Vernetzung und Netzoptimierung von Anlagen dezentraler, fluktuierender und erneuerbarer Energieerzeugung in Deutschland : Endbericht zum Vorhaben ; Kurzbezeichnung: CO2DEZ. Forschungsbericht / Umweltbundesamt. Bd. 1550. Förderkennzeichen: UFOPLAN 3707 46 100
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Gall, J.
A1  - Abel, Dirk
A1  - Ahlbrink, N.
A1  - Pitz-Paal, R.
A1  - Andersson, J.
A1  - Diehl, M.
A1  - Teixeira Boura, Cristiano José
A1  - Schmitz, M.
A1  - Hoffschmidt, Bernhard
T1  - Simulation and control of solar thermal power plants
T2  - International Conference on Renewable Energies and Power Quality : ICREPQ '10 : Granada 23rd - 25th March 2010
Y1  - 2010
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
T1  - Solare-Prozesswärme-Standards (Sol-Pro-St)
T2  - Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein
Y1  - 2010
SN  - 978-3-941785-29-8
SP  - 182
EP  - 187
PB  - OTTI
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Anthrakidis, Anette
T1  - Schnelltest zur Abschätzung der Wirkungsgradkennlinie von Parabolrinnenkollektoren
T2  - Thermische Solarenergie : 20. Symposium ; 05. bis 07. Mai 2010, Kloster Banz, Bad Staffelstein
Y1  - 2010
SN  - 978-3-941785-29-8
SP  - 112
EP  - 117
PB  - OTTI
CY  - Regensburg
ER  - 
TY  - JOUR
A1  - Jacobs, Stephan
T1  - Agilität in Großprojekten durch „Integration Driven Design“ : ein Erfahrungsbericht
JF  - Softwaretechnik-Trends (STT)
N2  - Der folgende Bericht fasst Erfahrungen zusammen, die in großen Entwicklungsprojekten der Firma Ericsson über mehrere Jahre gesammelt wurden. Ziel war dabei nicht, agile Methoden und Techniken einzusetzen - Agilität war zu der Zeit noch kein Hype-Thema. Vielmehr wurden Schwächen in den eigenen Projekten identifiziert und verbessert. Der Erfahrungsbericht vergleicht Verbesserungen in diesen Projekten mit den Ansätzen der agilen Entwicklung. Als Ergebnis werden folgende Punkte festgehalten: Erstens, einige Praktiken und Werte der agilen Entwicklung lassen sich auch in Großprojekten einsetzen. Zweitens, bei der Skalierung für Großprojekte werden diese Praktiken langsamer getaktet. Drittens, agile Entwicklung ist nicht nur eine Reihe von Praktiken und Werten, agile Entwicklung ist vielmehr auch eine Frage der Entwicklungs- und Projektkultur. Diese kulturelle Änderung lässt sich in Großprojekten deutlich langsamer umsetzen.
Y1  - 2010
SN  - 0720-8928
VL  - 30
IS  - 3
PB  - GI - Gesellschaft für Informatik
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Risse, Henry
A1  - Bolle, Friedrich-Wilhelm
A1  - Müller, Karsten
T1  - Energiebilanzen und -potenziale von Abwasseranlagen : Vorstellung neuer Untersuchungsvorhaben in NRW
T2  - 11. Kölner Kanal- und Kläranlagen-Kolloquium am 29. und 30. Sept. 2010. Aachener Schriften zur Stadtentwässerung ASS. Bd. 14
Y1  - 2010
SN  - 978-3-938996-07-2
SP  - 27/1
EP  - 27/16
PB  - Ges. zur Förderung der Siedlungswasserwirtschaft an der RWTH Aachen
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Müller, Karsten
T1  - Bedarfsorientierte Instandhaltung von Kanalisationen
Y1  - 2010
SN  - 978-3-8167-8060-1
PB  - IRB Verl.
CY  - Stuttgart
ER  - 
TY  - BOOK
A1  - Meinhardt, Stefan
A1  - Kern, Christian
A1  - Kauffmann, Kristian
A1  - Jahraus, Jochen
A1  - Lindemann, Markus
T1  - Innovative Gestaltung von Geschäftsprozessen in der Konsumgüterindustrie : Marktumfeld - Herausforderungen - Vorgehensmodell - Praxisbeispiele - Handlungsempfehlungen / [SAP Consulting] Stefan Meinhardt ... Unter Mitarb. von ... Markus A. Lindemann ...
Y1  - 2010
SN  - 978-3-89864-527-0
PB  - dpunkt-Verl.
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Wellmer, Georg
A1  - Behr, Marek
A1  - Ballmann, Josef
T1  - Development of a modular method for computational aero-structural analysis of aircraft
T2  - Summary of flow modulation and fluid-structure interaction findings. Results of the Collaborative Research Center SFB 401 at the RWTH Aachen University, Aachen, Germany, 1997-2008 / ed.: Wolfgang Schröder. Notes on numerical fluid mechanics and multidisciplinary design. Vol. 109
Y1  - 2010
SN  - 978-3-642-04087-0
SP  - 205
EP  - 238
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Kapoor, Hrshi
A1  - Braun, Carsten
A1  - Boller, Christian
ED  - Casciati, Fabio
T1  - Modelling and optimisation of maintenance intervals to realize structural health monitoring applications on aircraft
T2  - Structural health monitoring 2010 : proceedings of the Fifth European Workshop on Structural Health Monitoring held at Sorrento, Naples, Italy, June 28 - July 4, 2010 ; [EWSHM]
Y1  - 2010
SN  - 978-1-60595-024-2
SP  - 55
EP  - 63
PB  - DEStech Publ.
CY  - Lancaster, Pa.
ER  - 
TY  - CHAP
A1  - Kapoor, Hrshi
A1  - Boller, Christian
A1  - Giljohann, Sebastian
A1  - Braun, Carsten
T1  - Strategies for structural health monitoring implementation potential assessment in aircraft operational life extension considerations
T2  - 2nd International Symposium on NDT in Aerospace : November 22-24, 2010 Hamburg, Germany
Y1  - 2010
SN  - 978-3-940283-28-3
PB  - Dt. Gesellschaft für Zerstörungsfreie Prüfung
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Penne, Jochen
A1  - Profittlich, Martin
A1  - Ringbeck, Thorsten
A1  - Buxbaum, Bernd
ED  - D, Nicola D'Apuzzo
T1  - Touchless detailed 3D scan of human hand anatomy using time-of-flight cameras
T2  - Proceedings of the International Conference on 3D Body Scanning Technologies : Lugano, Switzerland, 19-20 October 2010
Y1  - 2010
SN  - 978-3-033-02714-5
SP  - 361
EP  - 369
PB  - Hometrica Consulting
CY  - Zürich
ER  - 
TY  - CHAP
A1  - Raatschen, Hans-Jürgen
T1  - 75 Jahre Vereinsgeschichte
T2  - Ingenieurfreunde FH Aachen : 75 Jahre Förderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik
KW  - Geschichte
Y1  - 2010
SN  - 978-3-941704-03-9
SP  - 66
EP  - 72
PB  - Klinkenberg
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Raatschen, Hans-Jürgen
T1  - Von der Königlichen Höheren Maschinenbauschule Aachen zu den Ingenieurfachbereichen der FH Aachen
T2  - Ingenieurfreunde FH Aachen : 75 Jahre Förderverein; Elektrotechnik und Informationstechnik, Luft- und Raumfahrttechnik, Maschinenbau und Mechatronik
KW  - Geschichte
Y1  - 2010
SN  - 978-3-941704-03-9
SP  - 13
EP  - 18
PB  - Klinkenberg
CY  - Aachen
ER  - 
TY  - BOOK
T1  - Kinetische Leuchtskulpturen : ein Projekt des Fachbereichs Gestaltung an der FH Aachen in Zusammenarbeit mit dem Rotary Club Aachen-Charlemagne
Y1  - 2010
PB  - FH Aachen
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - A new method to determine suitable spacings and distances for self-tapping screws
T2  - Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures
N2  - The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.
Y1  - 2010
SN  - 1864-1784
N1  - Paper 43-21-2
VL  - 43
PB  - Lehrstuhl für Ingenieurholzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
ED  - Cecotti, A.
T1  - Determining Suitable Spacings and Distances for Self-tapping Screws by Experimental and Numerical Studies
T2  - Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010
Y1  - 2010
N1  - Extended abstract. Full paper: DVD, Session 55, ID 108, 9 Seiten
SP  - 669
EP  - 670
ER  - 
TY  - JOUR
A1  - Heinzel, Alexander
A1  - Schäfer, Ralf
A1  - Müller, Hans-Wilhelm
A1  - Schieffer, Andre
A1  - Ingenhag, Ariane
A1  - Northoff, Georg
A1  - Franz, Matthias
A1  - Hautzel, Hubertus
T1  - Differential modulation of valence and arousal in high-alexithymic and low-alexithymic individuals
JF  - Neuroreport
N2  - High-alexithymic individuals are characterized by an impaired ability to identify and communicate emotions whereas low-alexithymic individuals have a wide-ranging ability to deal with emotions. This study examined the hypothesis that valence and arousal modifications of emotional stimuli differentially modulate cortical regions in high-alexithymic and low-alexithymic individuals. To this end, 28 high-alexithymic and 25 low-alexithymic individuals were investigated with event-related fMRI using visual emotional stimuli. We found differential neural activations in the dorsal anterior cingulate, the insula and the amygdala. We suggest that these differences may account for the impaired ability of high-alexithymic individuals to appropriately handle emotional stimuli.
Y1  - 2010
U6  - http://dx.doi.org/10.1097/WNR.0b013e32833f38e0
SN  - 1473-558X
VL  - 21
IS  - 15
SP  - 998
EP  - 1002
PB  - Lippincott Williams & Wilkins
CY  - London
ER  - 
TY  - JOUR
A1  - Heinzel, Alexander
A1  - Schäfer, Ralf
A1  - Müller, Hans-Wilhelm
A1  - Schieffer, Andre
A1  - Ingenhag, Ariane
A1  - Eickhoff, Simon B.
A1  - Northoff, Georg
A1  - Franz, Matthias
A1  - Hautzel, Hubertus
T1  - Increased Activation of the Supragenual Anterior Cingulate Cortex during Visual Emotional Processing in Male Subjects with High Degrees of Alexithymia: An Event-Related fMRI Study
JF  - Psychotherapy and Psychosomatics
N2  - Background: One of the most prominent neurobiological models of alexithymia assumes an altered function of the anterior cingulate cortex (ACC) as the crucial neural correlate of alexithymia. So far functional imaging studies have yielded inconclusive results. Therefore, we tested this hypothesis in healthy alexithymics and nonalexithymics in an event-related fMRI study.
Methods: Thirty high- and 30 low-alexithymic right-handed male subjects (selected by the 20-item Toronto Alexithymia Scale, TAS-20) were investigated with event-related fMRI using a picture viewing paradigm. The stimuli consisted of happy, fearful and neutral facial expressions (Ekman-Friesen) as well as positive, negative and neutral pictures from the International Affective Picture System.
Results: Contrasting the high-alexithymic with the low-alexithymic group we observed increased activation of the supragenual ACC for different emotional valences as well as for different emotional stimuli. Moreover, there was a positive correlation of the ACC with the individual TAS-20 scores but no correlations with the individual Beck Depression Inventory scores. Additionally, there was no difference in activity of the amygdala. 
Conclusions: We demonstrated that the supragenual ACC is constantly activated more strongly in alexithymic subjects and that this activation is related to the symptoms of alexithymia and not to associated symptoms such as depression. Therefore, our findings support the hypothesis of an altered function of the ACC in alexithymia.
Y1  - 2010
U6  - http://dx.doi.org/10.1159/000320121
SN  - 0033-3190
VL  - 79
IS  - 6
SP  - 363
EP  - 370
PB  - Karger
CY  - Basel
ER  - 
TY  - JOUR
A1  - Herzog, Hans
A1  - Pietrzyk, Uwe
A1  - Shah, N. Jon
A1  - Ziemons, Karl
T1  - The current state, challenges and perspectives of MR-PET
JF  - Neuroimage
N2  - Following the success of PET/CT during the last decade and the recent increasing proliferation of SPECT/CT, another hybrid imaging instrument has been gaining more and more interest: MR-PET. First combined, simultaneous PET and MR studies carried out in small animals demonstrated the feasibility of the new approach. Concurrently, some prototypes of an MR-PET scanner for simultaneous human brain studies have been built, their performance is being tested and preliminary applications have already been shown. Through this pioneering work, it has become clear that advances in the detector design are necessary for further optimization.

Recently, the different issues related to the present state and future prospects of MR-PET were presented and discussed during an international 2-day workshop at the Forschungszentrum Jülich, Germany, held after, and in conjunction with, the 2008 IEEE Nuclear Science Symposium and Medical Imaging Conference in Dresden, Germany on October 27–28, 2008. The topics ranged from small animal MR-PET imaging to human MR-BrainPET imaging, new detector developments, challenges/opportunities for ultra-high field MR-PET imaging and considerations of possible future research and clinical applications. This report presents a critical summary of the contributions made to the workshop.
Y1  - 2010
U6  - http://dx.doi.org/10.1016/j.neuroimage.2009.10.036
SN  - 1053-8119
VL  - 49
IS  - 3
SP  - 2072
EP  - 2082
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Beer, S.
A1  - Streun, M.
A1  - Hombach, T.
A1  - Buehler, J.
A1  - Jahnke, S.
A1  - Khodaverdi, M.
A1  - Larue, H.
A1  - Minwuyelet, S.
A1  - Parl, C.
A1  - Roeb, G.
A1  - Schurr, U.
A1  - Ziemons, Karl
T1  - Design and initial performance of PlanTIS: a high-resolution positron emission tomograph for plants
JF  - Physics in Medicine and Biology
N2  - Positron emitters such as 11C, 13N and 18F and their labelled compounds are widely used in clinical diagnosis and animal studies, but can also be used to study metabolic and physiological functions in plants dynamically and in vivo. A very particular tracer molecule is 11CO2 since it can be applied to a leaf as a gas. We have developed a Plant Tomographic Imaging System (PlanTIS), a high-resolution PET scanner for plant studies. Detectors, front-end electronics and data acquisition architecture of the scanner are based on the ClearPET™ system. The detectors consist of LSO and LuYAP crystals in phoswich configuration which are coupled to position-sensitive photomultiplier tubes. Signals are continuously sampled by free running ADCs, and data are stored in a list mode format. The detectors are arranged in a horizontal plane to allow the plants to be measured in the natural upright position. Two groups of four detector modules stand face-to-face and rotate around the field-of-view. This special system geometry requires dedicated image reconstruction and normalization procedures. We present the initial performance of the detector system and first phantom and plant measurements.
Y1  - 2010
U6  - http://dx.doi.org/10.1088/0031-9155/55/3/006
SN  - 1361-6560
VL  - 55
IS  - 3
SP  - 635
EP  - 646
PB  - IOP
CY  - Bristol
ER  - 
TY  - JOUR
A1  - Helmig, Ilka
T1  - Nitty - fontnames illustrated
JF  - Slanted
KW  - Illustration
KW  - Typographie
Y1  - 2010
SN  - 1867-6510
IS  - 11
SP  - 68
EP  - 69
PB  - Slanted Publishers
CY  - Karlsruhe
ER  - 
TY  - THES
A1  - Kowalski, Julia
T1  - Streamline estimation from sparsely sampled q-space Magnetic Resonance data
Y1  - 2010
N1  - Master Thesis in Medical Physics, ETH Zurich
ER  - 
TY  - JOUR
A1  - Christen, Marc
A1  - Kowalski, Julia
A1  - Bartelt, Perry
T1  - RAMMS: Numerical simulation of dense snow avalanches in three-dimensional terrain
JF  - Cold Regions Science and Technology
N2  - Numerical avalanche dynamics models have become an essential part of snow engineering. Coupled with field observations and historical records, they are especially helpful in understanding avalanche flow in complex terrain. However, their application poses several new challenges to avalanche engineers. A detailed understanding of the avalanche phenomena is required to construct hazard scenarios which involve the careful specification of initial conditions (release zone location and dimensions) and definition of appropriate friction parameters. The interpretation of simulation results requires an understanding of the numerical solution schemes and easy to use visualization tools. We discuss these problems by presenting the computer model RAMMS, which was specially designed by the SLF as a practical tool for avalanche engineers. RAMMS solves the depth-averaged equations governing avalanche flow with accurate second-order numerical solution schemes. The model allows the specification of multiple release zones in three-dimensional terrain. Snow cover entrainment is considered. Furthermore, two different flow rheologies can be applied: the standard Voellmy–Salm (VS) approach or a random kinetic energy (RKE) model, which accounts for the random motion and inelastic interaction between snow granules. We present the governing differential equations, highlight some of the input and output features of RAMMS and then apply the models with entrainment to simulate two well-documented avalanche events recorded at the Vallée de la Sionne test site.
KW  - RAMMS
KW  - snow
KW  - avalanche
Y1  - 2010
U6  - http://dx.doi.org/10.1016/j.coldregions.2010.04.005
SN  - 1872-7441
VL  - 63
IS  - 1-2
SP  - 1
EP  - 14
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Christen, Marc
A1  - Bartelt, Perry
A1  - Kowalski, Julia
T1  - Back calculation of the In den Arelen avalanche with RAMMS: Interpretation of model results
JF  - Annals of Glaciology
N2  - Two- and three-dimensional avalanche dynamics models are being increasingly used in hazard-mitigation studies. These models can provide improved and more accurate results for hazard mapping than the simple one-dimensional models presently used in practice. However, two- and three-dimensional models generate an extensive amount of output data, making the interpretation of simulation results more difficult. To perform a simulation in three-dimensional terrain, numerical models require a digital elevation model, specification of avalanche release areas (spatial extent and volume), selection of solution methods, finding an adequate calculation resolution and, finally, the choice of friction parameters. In this paper, the importance and difficulty of correctly setting up and analysing the results of a numerical avalanche dynamics simulation is discussed. We apply the two-dimensional simulation program RAMMS to the 1968 extreme avalanche event In den Arelen. We show the effect of model input variations on simulation results and the dangers and complexities in their interpretation.
KW  - avalanche
Y1  - 2010
SN  - 1727-5644
U6  - http://dx.doi.org/10.3189/172756410791386553
VL  - 51
IS  - 54
SP  - 161
EP  - 168
PB  - Cambridge University Press
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Fabo, Sabine
ED  - Mohr, Klaus
T1  - Sisyphus wird Steiff
JF  - Prädikat spießig (Boxhorn ; 21)
N2  - Eine Reise durch die fremde Welt eines Kaufhaus-Schaufensters. Plüschtiere mit eingebauter Bewegungstechnik - knuffig oder nur eine Ausformulierung des Ernst des Lebens?
Y1  - 2010
SN  - 1864-2535
VL  - 2010
SP  - 58
EP  - 61
PB  - FH Aachen, Fachbereich Gestaltung
CY  - Aachen
ER  -