TY - THES A1 - Friedel, Janina T1 - Die Dinge danach : zum Hochwasser 21 N2 - Juli 2021. Durch starke Regenfälle von bis zu 250 l/m² innerhalb von 24h durch das Sturmtief «Bernd» war es dem bereits von vorherigen Niederschlägen übersättigten Boden nicht mehr möglich, weitere Wassermengen aufzunehmen. Die Folge sind schwerwiegende Überflutungen vor allem in Rheinland-Pfalz und NRW. Dass die Auswirkungen des Klimawandels bereits zu Hause angekommen sind, wird mit dieser Arbeit autobiografisch und illustrativ innerhalb eines Graphic Novels «Die Dinge danach – zum Hochwasser 21» be- und verarbeitet. Denn als das Wasser zu Hause wütete, war die Autorin selbst nicht anwesend. Dafür steckte sie die ersten Tage in Euskirchen fest, eine Stadt, die selbst Land unter war und zu einer Insel wurde. Ohne Strom, Netz und stark erschwertem Kontakt nach außen … und dabei sollte sie ursprünglich für eine Woche nur zwei Kater versorgen. KW - Illustration KW - Graphic Novel KW - Hochwasserkatastrophe KW - Juli21 KW - Flut Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Funke, Harald A1 - Beckmann, Nils A1 - Stefan, Lukas A1 - Keinz, Jan T1 - Hydrogen combustor integration study for a medium range aircraft engine using the dry-low NOx “Micromix” combustion principle T2 - Proceedings of the ASME Turbo Expo 2023: Turbomachinery Technical Conference and Exposition. Volume 1: Aircraft Engine. Boston, Massachusetts, USA. June 26–30, 2023 N2 - The feasibility study presents results of a hydrogen combustor integration for a Medium-Range aircraft engine using the Dry-Low-NOₓ Micromix combustion principle. Based on a simplified Airbus A320-type flight mission, a thermodynamic performance model of a kerosene and a hydrogen-powered V2530-A5 engine is used to derive the thermodynamic combustor boundary conditions. A new combustor design using the Dry-Low NOx Micromix principle is investigated by slice model CFD simulations of a single Micromix injector for design and off-design operation of the engine. Combustion characteristics show typical Micromix flame shapes and good combustion efficiencies for all flight mission operating points. Nitric oxide emissions are significant below ICAO CAEP/8 limits. For comparison of the Emission Index (EI) for NOₓ emissions between kerosene and hydrogen operation, an energy (kerosene) equivalent Emission Index is used. A full 15° sector model CFD simulation of the combustion chamber with multiple Micromix injectors including inflow homogenization and dilution and cooling air flows investigates the combustor integration effects, resulting NOₓ emission and radial temperature distributions at the combustor outlet. The results show that the integration of a Micromix hydrogen combustor in actual aircraft engines is feasible and offers, besides CO₂ free combustion, a significant reduction of NOₓ emissions compared to kerosene operation. KW - emission index KW - nitric oxides KW - aircraft engine KW - Micromix KW - combustion KW - hydrogen Y1 - 2023 SN - 978-0-7918-8693-9 U6 - http://dx.doi.org/10.1115/GT2023-102370 N1 - Paper No. GT2023-102370, V001T01A022 PB - ASME CY - New York ER - TY - JOUR A1 - Gaigall, Daniel ED - AitSahlia, Farid T1 - Allocating and forecasting changes in risk JF - Journal of risk N2 - We consider time-dependent portfolios and discuss the allocation of changes in the risk of a portfolio to changes in the portfolio’s components. For this purpose we adopt established allocation principles. We also use our approach to obtain forecasts for changes in the risk of the portfolio’s components. To put the approach into practice we present an implementation based on the output of a simulation. Allocation is illustrated with an example portfolio in the context of Solvency II. The quality of the forecasts is investigated with an empirical study. KW - portfolio risk KW - allocation KW - forecast KW - covariance principle KW - conditional expectation principle Y1 - 2023 U6 - http://dx.doi.org/10.21314/JOR.2022.048 SN - 1755-2842 SN - 1465-1211 VL - 25 IS - 3 SP - 1 EP - 24 PB - Infopro Digital Risk CY - London ER - TY - JOUR A1 - Gaigall, Daniel T1 - On the applicability of several tests to models with not identically distributed random effects JF - Statistics : A Journal of Theoretical and Applied Statistics N2 - We consider Kolmogorov–Smirnov and Cramér–von-Mises type tests for testing central symmetry, exchangeability, and independence. In the standard case, the tests are intended for the application to independent and identically distributed data with unknown distribution. The tests are available for multivariate data and bootstrap procedures are suitable to obtain critical values. We discuss the applicability of the tests to random effects models, where the random effects are independent but not necessarily identically distributed and with possibly unknown distributions. Theoretical results show the adequacy of the tests in this situation. The quality of the tests in models with random effects is investigated by simulations. Empirical results obtained confirm the theoretical findings. A real data example illustrates the application. KW - central symmetry test KW - exchangeability test KW - independence test KW - random effects KW - not identically distributed Y1 - 2023 SN - 0323-3944 U6 - http://dx.doi.org/10.1080/02331888.2023.2193748 SN - 1029-4910 VL - 57 PB - Taylor & Francis CY - London ER - TY - THES A1 - Gaigall, Daniel T1 - On selected problems in multivariate analysis N2 - Selected problems in the field of multivariate statistical analysis are treated. Thereby, one focus is on the paired sample case. Among other things, statistical testing problems of marginal homogeneity are under consideration. In detail, properties of Hotelling‘s T² test in a special parametric situation are obtained. Moreover, the nonparametric problem of marginal homogeneity is discussed on the basis of possibly incomplete data. In the bivariate data case, properties of the Hoeffding-Blum-Kiefer-Rosenblatt independence test statistic on the basis of partly not identically distributed data are investigated. Similar testing problems are treated within the scope of the application of a result for the empirical process of the concomitants for partly categorial data. Furthermore, testing changes in the modeled solvency capital requirement of an insurance company by means of a paired sample from an internal risk model is discussed. Beyond the paired sample case, a new asymptotic relative efficiency concept based on the expected volumes of multidimensional confidence regions is introduced. Besides, a new approach for the treatment of the multi-sample goodness-of-fit problem is presented. Finally, a consistent test for the treatment of the goodness-of-fit problem is developed for the background of huge or infinite dimensional data. KW - Paired sample KW - Marginal homogeneity KW - Incomplete data KW - Asymptotic relative efficiency KW - Volumes of confidence regions Y1 - 2023 U6 - http://dx.doi.org/10.15488/14304 N1 - Gottfried Wilhelm Leibniz Universität Hannover ER - TY - JOUR A1 - Gaigall, Daniel A1 - Gerstenberg, Julian T1 - Cramér-von-Mises tests for the distribution of the excess over a confidence level JF - Journal of Nonparametric Statistics N2 - The Cramér-von-Mises distance is applied to the distribution of the excess over a confidence level. Asymptotics of related statistics are investigated, and it is seen that the obtained limit distributions differ from the classical ones. For that reason, quantiles of the new limit distributions are given and new bootstrap techniques for approximation purposes are introduced and justified. The results motivate new one-sample goodness-of-fit tests for the distribution of the excess over a confidence level and a new confidence interval for the related fitting error. Simulation studies investigate size and power of the tests as well as coverage probabilities of the confidence interval in the finite sample case. A practice-oriented application of the Cramér-von-Mises tests is the determination of an appropriate confidence level for the fitting approach. The adoption of the idea to the well-known problem of threshold detection in the context of peaks over threshold modelling is sketched and illustrated by data examples. KW - Cramér-von-Mises test KW - conditional excess distribution KW - confidence interval KW - goodness-of-fit test Y1 - 2023 U6 - http://dx.doi.org/10.1080/10485252.2023.2173958 SN - 1048-5252 (Print) SN - 1029-0311 (Online) PB - Taylor & Francis ER - TY - THES A1 - Garcia Lange, Ayari T1 - FIELDPRO : Integrated equipment system for traveling journalists N2 - In today's ultra-connected world, the significance of audio-visual documentation is rapidly growing. Technological advancements have made it more accessible to obtain powerful and compact audio-visual equipment, thereby reducing the dependency on a larger team for the documentation process. This has favoured the development of what is known as backpack journalism. This project meets an unmet market need and presents an opportunity for innovative product development. It focuses on backpack journalists working in remote and challenging conditions with unpredictable transportation and working conditions. The proposed backpack design addresses both transport and working setups. Offering a robust and waterproof yet overall lightweight construction for easy equipment carrying, while also providing an extension of the workspace for essential gear. KW - Produktdesign KW - Medienjournalist KW - Rucksack KW - Hardcase KW - Abgelegene Gebiete Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Glück, Anna T1 - Entwicklung eines Erscheinungsbildes für ein Unternehmen im Bereich Bioenergiefassaden N2 - Nachhaltige Technologien, die Ressourcen schonen und Energie gewinnen, erlangen zunehmend an Bedeutung im urbanen Raum. Diese Bachelorarbeit befasst sich mit der Entwicklung eines Corporate Designs für ein Unternehmen, das sich auf die Fertigung und Planung von Bioenergiefassaden spezialisiert hat. Das Unternehmen sorgt durch seinen Fokus auf nachhaltige Energiegewinnung und effiziente Gebäudeplanung für die Verbesserung der ökologischen Herausforderungen. Das Ziel des neuen Corporate Designs ist es, die komplexe Thematik der Bioenergiefassaden der Zielgruppe effektiv zu vermitteln und ihr Interesse für dieses System zu wecken. Dabei werden Illustrationen und Infografiken eingesetzt, um die Technologie verständlich darzustellen, die positiven Umweltauswirkungen sowie Vorteile der Bioenergiefassaden deutlich hervorzuheben und mehr Umsetzungen zu erzielen. KW - Bioenergiefassaden KW - Erscheinungsbild KW - Nachhaltigkeit KW - Technologie KW - Algen Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - CHAP A1 - Goh, Kheng Lim A1 - Topçu, Murat A1 - Madabhushi, Gopal S. P. A1 - Staat, Manfred ED - Maia, Fatima Raquel Azevedo ED - Miguel Oliveira, J. ED - Reis, Rui L. T1 - Collagen fibril reinforcement in connective tissue extracellular matrices T2 - Handbook of the extracellular matrix N2 - The connective tissues such as tendons contain an extracellular matrix (ECM) comprising collagen fibrils scattered within the ground substance. These fibrils are instrumental in lending mechanical stability to tissues. Unfortunately, our understanding of how collagen fibrils reinforce the ECM remains limited, with no direct experimental evidence substantiating current theories. Earlier theoretical studies on collagen fibril reinforcement in the ECM have relied predominantly on the assumption of uniform cylindrical fibers, which is inadequate for modelling collagen fibrils, which possessed tapered ends. Recently, Topçu and colleagues published a paper in the International Journal of Solids and Structures, presenting a generalized shear-lag theory for the transfer of elastic stress between the matrix and fibers with tapered ends. This paper is a positive step towards comprehending the mechanics of the ECM and makes a valuable contribution to formulating a complete theory of collagen fibril reinforcement in the ECM. KW - Connective tissues KW - Extracellular matrix (ECM) KW - Collagen fibrils KW - Mechanical stability KW - Tapered ends Y1 - 2023 SN - 978-3-030-92090-6 (Print) SN - 978-3-030-92090-6 (Online) U6 - http://dx.doi.org/10.1007/978-3-030-92090-6_6-1 SP - 1 EP - 20 PB - Springer Nature CY - Cham ER - TY - JOUR A1 - Golland, Alexander T1 - Immaterieller Schadensersatz bei Datenschutzverstößen – EuGH tariert aus JF - NWB - Steuer- und Wirtschaftsrecht N2 - Umsatzbasierte Bußgelder – wie sonst nur aus dem Kartellrecht bekannt – waren einer der Gründe, warum die Datenschutz-Grundverordnung (DSGVO) vor ihrem Inkrafttreten für erhebliches Aufsehen sorgte. Die vielfach relevanteren Schadensersatzansprüche, die, wie bei „Dieselgate“, aufgrund der Vielzahl von betroffenen Personen und der aus Sicht von Rechtsdienstleistern bestehenden Skalierbarkeit mit weitaus höheren Einbußen für Unternehmen einhergehen können, blieben zunächst unbeachtet. Inzwischen ist der Schadensersatzanspruch gem. Art. 82 DSGVO die Vorschrift, die die meisten Vorlagen zum Europäischen Gerichtshof (EuGH) der letzten Jahre hervorgerufen hat. Am 4.5.2023 hat nun der EuGH (Urteil v. 4.5.2023 - Rs. C-300/21, NWB GAAAJ-41389) in einem Grundsatzurteil über zentrale Fragen rund um den Ersatz immaterieller Schäden als Folge von Datenschutzverstößen entschieden. KW - Datenschutzgrundverordnung KW - Schadensersatz Y1 - 2023 SN - 0028-3460 VL - 2023 IS - 26 SP - 1845 EP - 1845 PB - NWB Verlag CY - Herne ER - TY - GEN A1 - Golland, Alexander T1 - Formelle DSGVO-Verstöße wirken sich nicht auf Rechtmäßigkeit der Verarbeitung aus BT - Zugleich Besprechung einer Entscheidung des EuGH, Urteil vom 4.5.2023 - C-60/22 T2 - Datenschutz-Berater (DSB) N2 - In dem vorliegenden Beitrag setzt sich der Verfasser mit dem Urteil des EuGH vom 4.5.2023 (Az.: C-60/22, DSB 2023, 178) zu den Auswirkungen eines formellen Verstoßes des Verantwortlichen gegen die Pflichten aus Artt. 26, 30 DSGVO (juris: EUV 2016/679) auf die Rechtmäßigkeit der Datenverarbeitung auseinander. Nachdem zunächst der zugrunde liegende Sachverhalt und der Hintergrund des Vorlageverfahrens skizziert wurden, gibt der Verfasser einen Überblick über die wesentlichen Entscheidungsgründe des EuGH. Insbesondere stelle der EuGH hier fest, dass die Rechtmäßigkeit der Verarbeitung in Art. 6 DSGVO geregelt sei und sich eine rechtswidrige Verarbeitung daher nur aus einem Verstoß gegen die Artt. 6 ff. DSGVO ergeben könne; die Pflichten aus Art. 26 und Art. 30 DSGVO würden nicht zu den Gründen für die Rechtmäßigkeit der Verarbeitung zählen. Mit Blick auf die Praxis lasse sich, so der Verfasser abschließend, festhalten, dass die Entscheidung insofern nicht überraschend sei; jedoch sei die Feststellung, dass sich aus Verstößen gegen Art. 26 und Art. 30 DSGVO kein Verstoß gegen das Grundrecht auf den Schutz personenbezogener Daten nachweisen lasse überraschend und bedenklich. Auch überrasche es, dass der EuGH eher in einem Nebensatz feststelle, dass der Verantwortliche im Prozess aufgrund seiner Rechenschaftspflicht gegenüber Betroffenen beweisbelastet ist; ob sich die Kammer hier der möglichen Auswirkungen ihrer Ausführungen bewusst gewesen sei, bleibe fraglich. Y1 - 2023 N1 - Entscheidungsreport SP - 178 EP - 180 PB - Fachmedien Recht und Wirtschaft CY - Frankfurt am Main ER - TY - JOUR A1 - Grajewski, Matthias A1 - Kleefeld, Andreas T1 - Detecting and approximating decision boundaries in low-dimensional spaces JF - Numerical Algorithms N2 - A method for detecting and approximating fault lines or surfaces, respectively, or decision curves in two and three dimensions with guaranteed accuracy is presented. Reformulated as a classification problem, our method starts from a set of scattered points along with the corresponding classification algorithm to construct a representation of a decision curve by points with prescribed maximal distance to the true decision curve. Hereby, our algorithm ensures that the representing point set covers the decision curve in its entire extent and features local refinement based on the geometric properties of the decision curve. We demonstrate applications of our method to problems related to the detection of faults, to multi-criteria decision aid and, in combination with Kirsch’s factorization method, to solving an inverse acoustic scattering problem. In all applications we considered in this work, our method requires significantly less pointwise classifications than previously employed algorithms. KW - MCDA KW - Inverse scattering problem KW - Fault approximation KW - Fault detection Y1 - 2023 SN - 1572-9265 N1 - Corresponding author: Matthias Grajewski VL - 93 IS - 4 PB - Springer Science+Business Media CY - Dordrecht ER - TY - INPR A1 - Greiner, Lasse A1 - Jeromin, Günter Erich A1 - Sithole, Patience A1 - Petersen, Soenke T1 - Preprint: Studies on the enzymatic reduction of levulinic acid using Chiralidon-R and Chiralidon-S T2 - ChemRxiv N2 - The enzymatic reduction of levulinic acid by the chiral catalysts Chiralidon-R and Chiralidon-S which are commercially available superabsorbed alcohol dehydrogenases is described. The Chiralidon®-R/S reduces the levulinic acid to the (R,S)-4-hydroxy valeric acid and the (R)- or (S)- gamma-valerolactone. KW - Levulinic acid KW - Chiralidon-R KW - Chiralidon-S KW - 4-hydroxy valeric acid KW - (R)- or (S)- gamma-valerolactone Y1 - 2023 U6 - http://dx.doi.org/10.26434/chemrxiv-2023-jlvcv ER - TY - CHAP A1 - Grund, Raphael M. A1 - Altherr, Lena ED - Reiff-Stephan, Jörg ED - Jäkel, Jens ED - Schwarz, André T1 - Development of an open source energy disaggregation tool for the home automation platform Home Assistant T2 - Tagungsband AALE 2023 : mit Automatisierung gegen den Klimawandel N2 - In order to reduce energy consumption of homes, it is important to make transparent which devices consume how much energy. However, power consumption is often only monitored aggregated at the house energy meter. Disaggregating this power consumption into the contributions of individual devices can be achieved using Machine Learning. Our work aims at making state of the art disaggregation algorithms accessibe for users of the open source home automation platform Home Assistant. KW - Home Automation Platform KW - Home Assistant KW - Open Source KW - Machine Learning KW - Energy Disaggregation Y1 - 2023 SN - 978-3-910103-01-6 U6 - http://dx.doi.org/10.33968/2023.02 N1 - 19. AALE-Konferenz. Luxemburg, 08.03.-10.03.2023. BTS Connected Buildings & Cities Luxemburg (Tagungsband unter https://doi.org/10.33968/2023.01) SP - 11 EP - 20 PB - le-tex publishing services GmbH CY - Leipzig ER - TY - THES A1 - Götz, Daniela T1 - Entwicklung eines Erscheinungsbildes für das Start-up-Unternehmen CoArea N2 - Diese Bachelorarbeit befasst sich mit dem Corporate Design des aufstrebenden Startups "CoArea". Seine innovative Plattform vermittelt ungenutzte Flächen im urbanen Raum und bringt Flächenbedarf und -bereitstellung intelligent zusammen. Die Arbeit untersucht, wie das Erscheinungsbild von CoArea das Unternehmen als modern, nachhaltig und ressourcenschonend positioniert. Durch das neu gestaltete Corporate Design wird diese besondere Herangehensweise zur effizienten Nutzung begrenzter Ressourcen unserer Umwelt durch CoArea deutlich und nach außen getragen. CoArea strebt danach, die positive Entwicklung der Städte voranzutreiben und die soziale Nachhaltigkeit durch den Austausch und die Interaktion zwischen verschiedenen Menschen und Gemeinschaften zu fördern. KW - Start-up KW - Nachhaltigkeit KW - Flächennutzung KW - Schraffur KW - Ressourcenschonung Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - RPRT A1 - Haeger, Gerrit A1 - Bongaerts, Johannes A1 - Siegert, Petra T1 - Abschlussbericht Teil II: Eingehende Darstellung Neue biobasierte Lipopeptide aus nachhaltiger Produktion (LipoPep) Y1 - 2023 N1 - Förderkennzeichen: 13FH256PA6 Titel: FHprofUnt 2016: Neue biobasierte Lipopeptide aus nachhaltiger Produktion Laufzeit: 01.02.2019 – 31.10.2022 ER - TY - JOUR A1 - Haeger, Gerrit A1 - Grankin, Alina A1 - Wagner, Michaela T1 - Construction of an Aspergillus oryzae triple amylase deletion mutant as a chassis to evaluate industrially relevant amylases using multiplex CRISPR/Cas9 editing technology JF - Applied Research N2 - Aspergillus oryzae is an industrially relevant organism for the secretory production of heterologous enzymes, especially amylases. The activities of potential heterologous amylases, however, cannot be quantified directly from the supernatant due to the high background activity of native α-amylase. This activity is caused by the gene products of amyA, amyB, and amyC. In this study, an in vitro CRISPR/Cas9 system was established in A. oryzae to delete these genes simultaneously. First, pyrG of A. oryzae NSAR1 was mutated by exploiting NHEJ to generate a counter-selection marker. Next, all amylase genes were deleted simultaneously by co-transforming a repair template carrying pyrG of Aspergillus nidulans and flanking sequences of amylase gene loci. The rate of obtained triple knock-outs was 47%. We showed that triple knockouts do not retain any amylase activity in the supernatant. The established in vitro CRISPR/Cas9 system was used to achieve sequence-specific knock-in of target genes. The system was intended to incorporate a single copy of the gene of interest into the desired host for the development of screening methods. Therefore, an integration cassette for the heterologous Fpi amylase was designed to specifically target the amyB locus. The site-specific integration rate of the plasmid was 78%, with exceptional additional integrations. Integration frequency was assessed via qPCR and directly correlated with heterologous amylase activity. Hence, we could compare the efficiency between two different signal peptides. In summary, we present a strategy to exploit CRISPR/Cas9 for gene mutation, multiplex knock-out, and the targeted knock-in of an expression cassette in A. oryzae. Our system provides straightforward strain engineering and paves the way for development of fungal screening systems. KW - aspergillus KW - CRISPR/Cas9 KW - filamentous fungi KW - genome engineering Y1 - 2023 U6 - http://dx.doi.org/10.1002/appl.202200106 SN - 2702-4288 IS - Early View SP - 1 EP - 15 PB - Wiley-VCH ER - TY - JOUR A1 - Haeger, Gerrit A1 - Probst, Johanna A1 - Jaeger, Karl-Erich A1 - Bongaerts, Johannes A1 - Siegert, Petra T1 - Novel aminoacylases from Streptomyces griseus DSM 40236 and their recombinant production in Streptomyces lividans JF - FEBS Open Bio N2 - Amino acid-based surfactants are valuable compounds for cosmetic formulations. The chemical synthesis of acyl-amino acids is conventionally performed by the Schotten-Baumann reaction using fatty acyl chlorides, but aminoacylases have also been investigated for use in biocatalytic synthesis with free fatty acids. Aminoacylases and their properties are diverse; they belong to different peptidase families and show differences in substrate specificity and biocatalytic potential. Bacterial aminoacylases capable of synthesis have been isolated from Burkholderia, Mycolicibacterium, and Streptomyces. Although several proteases and peptidases from S. griseus have been described, no aminoacylases from this species have been identified yet. In this study, we investigated two novel enzymes produced by S. griseus DSM 40236ᵀ . We identified and cloned the respective genes and recombinantly expressed an α-aminoacylase (EC 3.5.1.14), designated SgAA, and an ε-lysine acylase (EC 3.5.1.17), designated SgELA, in S. lividans TK23. The purified aminoacylase SgAA was biochemically characterized, focusing on its hydrolytic activity to determine temperature- and pH optima and stabilities. The aminoacylase could hydrolyze various acetyl-amino acids at the Nα -position with a broad specificity regarding the sidechain. Substrates with longer acyl chains, like lauroyl-amino acids, were hydrolyzed to a lesser extent. Purified aminoacylase SgELA specific for the hydrolysis of Nε -acetyl-L-lysine was unstable and lost its enzymatic activity upon storage for a longer period but could initially be characterized. The pH optimum of SgELA was pH 8.0. While synthesis of acyl-amino acids was not observed with SgELA, SgAA catalyzed the synthesis of lauroyl-methionine. KW - Streptomyces lividans KW - recombinant expression KW - Streptomyces griseus KW - ε-lysine acylase KW - α-aminoacylase Y1 - 2023 U6 - http://dx.doi.org/10.1002/2211-5463.13723 SN - 2211-5463 N1 - Corresponding author: Petra Siegert VL - 13 IS - 12 SP - 2224 EP - 2238 PB - Wiley CY - Hoboken, NJ ER - TY - JOUR A1 - Haeger, Gerrit A1 - Wirges, Jessika A1 - Tanzmann, Nicole A1 - Oyen, Sven A1 - Jolmes, Tristan A1 - Jaeger, Karl-Erich A1 - Schörken, Ulrich A1 - Bongaerts, Johannes A1 - Siegert, Petra T1 - Chaperone assisted recombinant expression of a mycobacterial aminoacylase in Vibrio natriegens and Escherichia coli capable of N-lauroyl-L-amino acid synthesis JF - Microbial Cell Factories N2 - Background Aminoacylases are highly promising enzymes for the green synthesis of acyl-amino acids, potentially replacing the environmentally harmful Schotten-Baumann reaction. Long-chain acyl-amino acids can serve as strong surfactants and emulsifiers, with application in cosmetic industries. Heterologous expression of these enzymes, however, is often hampered, limiting their use in industrial processes. Results We identified a novel mycobacterial aminoacylase gene from Mycolicibacterium smegmatis MKD 8, cloned and expressed it in Escherichia coli and Vibrio natriegens using the T7 overexpression system. The recombinant enzyme was prone to aggregate as inclusion bodies, and while V. natriegens Vmax™ could produce soluble aminoacylase upon induction with isopropyl β-d-1-thiogalactopyranoside (IPTG), E. coli BL21 (DE3) needed autoinduction with lactose to produce soluble recombinant protein. We successfully conducted a chaperone co-expression study in both organisms to further enhance aminoacylase production and found that overexpression of chaperones GroEL/S enhanced aminoacylase activity in the cell-free extract 1.8-fold in V. natriegens and E. coli. Eventually, E. coli ArcticExpress™ (DE3), which co-expresses cold-adapted chaperonins Cpn60/10 from Oleispira antarctica, cultivated at 12 °C, rendered the most suitable expression system for this aminoacylase and exhibited twice the aminoacylase activity in the cell-free extract compared to E. coli BL21 (DE3) with GroEL/S co-expression at 20 °C. The purified aminoacylase was characterized based on hydrolytic activities, being most stable and active at pH 7.0, with a maximum activity at 70 °C, and stability at 40 °C and pH 7.0 for 5 days. The aminoacylase strongly prefers short-chain acyl-amino acids with smaller, hydrophobic amino acid residues. Several long-chain amino acids were fairly accepted in hydrolysis as well, especially N-lauroyl-L-methionine. To initially evaluate the relevance of this aminoacylase for the synthesis of N-acyl-amino acids, we demonstrated that lauroyl-methionine can be synthesized from lauric acid and methionine in an aqueous system. Conclusion Our results suggest that the recombinant enzyme is well suited for synthesis reactions and will thus be further investigated. KW - Acyl-amino acids KW - Inclusion bodies KW - Chaperone co-expression KW - Vibrio natriegens KW - Aminoacylase Y1 - 2023 U6 - http://dx.doi.org/10.1186/s12934-023-02079-1 SN - 1475-2859 N1 - Corresponding author: Petra Siegert IS - 22 SP - Article number: 77 (2023) PB - Springer Nature ER - TY - JOUR A1 - Hammer, Thorben A1 - Quitter, Julius A1 - Mayntz, Joscha A1 - Bauschat, J.-Michael A1 - Dahmann, Peter A1 - Götten, Falk A1 - Hille, S. A1 - Stumpf, E. T1 - Free fall drag estimation of small-scale multirotor unmanned aircraft systems using computational fluid dynamics and wind tunnel experiments JF - CEAS Aeronautical Journal N2 - New European Union (EU) regulations for UAS operations require an operational risk analysis, which includes an estimation of the potential danger of the UAS crashing. A key parameter for the potential ground risk is the kinetic impact energy of the UAS. The kinetic energy depends on the impact velocity of the UAS and, therefore, on the aerodynamic drag and the weight during free fall. Hence, estimating the impact energy of a UAS requires an accurate drag estimation of the UAS in that state. The paper at hand presents the aerodynamic drag estimation of small-scale multirotor UAS. Multirotor UAS of various sizes and configurations were analysed with a fully unsteady Reynolds-averaged Navier–Stokes approach. These simulations included different velocities and various fuselage pitch angles of the UAS. The results were compared against force measurements performed in a subsonic wind tunnel and provided good consistency. Furthermore, the influence of the UAS`s fuselage pitch angle as well as the influence of fixed and free spinning propellers on the aerodynamic drag was analysed. Free spinning propellers may increase the drag by up to 110%, depending on the fuselage pitch angle. Increasing the fuselage pitch angle of the UAS lowers the drag by 40% up to 85%, depending on the UAS. The data presented in this paper allow for increased accuracy of ground risk assessments. KW - Multirotor UAS KW - Drag estimation KW - CFD KW - Wind tunnel experiments KW - Wind milling Y1 - 2023 U6 - http://dx.doi.org/10.1007/s13272-023-00702-w SN - 1869-5590 (Online) SN - 1869-5582 (Print) N1 - Corresponding author: Thorben Hammer PB - Springer CY - Wien ER - TY - THES A1 - Hatke, Lars T1 - X Plore: human hybrid submarine N2 - Das „X Plore“ ist ein human hybrid angetriebenes Tauchboot, welches sowohl für den touristischen als auch privaten Gebrauch konzipiert ist. Das immersive Design des „X Plore" sorgt für ein eindrucksvolles Taucherlebnis. Das Konzept soll die Menschen über die aktuelle Not der Meere und ihrer Lebewesen aufklären und ihnen gleichzeitig die Möglichkeit geben, der Unterwasserwelt näher zukommen. Zudem soll es diese erhalten und ihre Bewohner:innen schützen. Des Weiteren thematisiert die Arbeit zukunftsorientierte Antriebs- und Batterietechniken und setzt sich mit der sinnvollen Integrierung dieser auseinander. KW - Entdecken KW - Abenteuer KW - Erkunden KW - Unterwasserwelt KW - Tauchboot Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Heieis, Jule A1 - Böcker, Jonas A1 - D'Angelo, Olfa A1 - Mittag, Uwe A1 - Albracht, Kirsten A1 - Schönau, Eckhard A1 - Meyer, Andreas A1 - Voigtmann, Thomas A1 - Rittweger, Jörn T1 - Curvature of gastrocnemius muscle fascicles as function of muscle–tendon complex length and contraction in humans JF - Physiological Reports N2 - It has been shown that muscle fascicle curvature increases with increasing contraction level and decreasing muscle–tendon complex length. The analyses were done with limited examination windows concerning contraction level, muscle–tendon complex length, and/or intramuscular position of ultrasound imaging. With this study we aimed to investigate the correlation between fascicle arching and contraction, muscle–tendon complex length and their associated architectural parameters in gastrocnemius muscles to develop hypotheses concerning the fundamental mechanism of fascicle curving. Twelve participants were tested in five different positions (90°/105°*, 90°/90°*, 135°/90°*, 170°/90°*, and 170°/75°*; *knee/ankle angle). They performed isometric contractions at four different contraction levels (5%, 25%, 50%, and 75% of maximum voluntary contraction) in each position. Panoramic ultrasound images of gastrocnemius muscles were collected at rest and during constant contraction. Aponeuroses and fascicles were tracked in all ultrasound images and the parameters fascicle curvature, muscle–tendon complex strain, contraction level, pennation angle, fascicle length, fascicle strain, intramuscular position, sex and age group were analyzed by linear mixed effect models. Mean fascicle curvature of the medial gastrocnemius increased with contraction level (+5 m−1 from 0% to 100%; p = 0.006). Muscle–tendon complex length had no significant impact on mean fascicle curvature. Mean pennation angle (2.2 m−1 per 10°; p < 0.001), inverse mean fascicle length (20 m−1 per cm−1; p = 0.003), and mean fascicle strain (−0.07 m−1 per +10%; p = 0.004) correlated with mean fascicle curvature. Evidence has also been found for intermuscular, intramuscular, and sex-specific intramuscular differences of fascicle curving. Pennation angle and the inverse fascicle length show the highest predictive capacities for fascicle curving. Due to the strong correlations between pennation angle and fascicle curvature and the intramuscular pattern of curving we suggest for future studies to examine correlations between fascicle curvature and intramuscular fluid pressure. KW - biomechanics KW - connective tissue KW - physiology KW - ultrasound Y1 - 2023 U6 - http://dx.doi.org/10.14814/phy2.15739 SN - 2051-817X VL - 11 IS - 11 SP - e15739, Seite 1-11 PB - Wiley ER - TY - CHAP A1 - Heimes, Heiner Hans A1 - Kampker, Achim A1 - Dorn, Benjamin A1 - Kehrer, Mario A1 - Dünnwald, Simon A1 - Badura, Dennis A1 - Terren, Maximilian A1 - Röth, Thilo ED - Kampker, Achim ED - Heimes, Heiner Hans T1 - Produktionsprozesse der Fahrzeugstruktur T2 - Elektromobilität: Grundlagen einer Fortschrittstechnologie Y1 - 2023 SN - 978-3-662-65811-6 (Print) SN - 978-3-662-65812-3 (Online) U6 - http://dx.doi.org/10.1007/978-3-662-65812-3_13 N1 - Corresponding author: Benjamin Dorn SP - 227 EP - 247 PB - Springer Vieweg CY - Berlin ER - TY - CHAP A1 - Heimes, Heiner Hans A1 - Kampker, Achim A1 - Kehrer, Mario A1 - Dünnwald, Simon A1 - Heetfeld, Lennart A1 - Polzenberg, Jens A1 - Budde, Lucas A1 - Keusen, Maximilian A1 - Pandey, Rahul A1 - Röth, Thilo ED - Kampker, Achim ED - Heimes, Heiner Hans T1 - Fahrzeugstruktur T2 - Elektromobilität: Grundlagen einer Fortschrittstechnologie N2 - Um sowohl Treibhausgas-Emissionen zu verringern als auch Kraftstoffressourcen zu schonen, wird zunehmend an einer Transformation konventionell angetriebener Kraftfahrzeuge hin zu elektrifizierten Antriebskonzepten gearbeitet. Basierend auf herkömmlichen Fahrzeugen mit Verbrennungsmotor wurde eine Vielzahl neuer Antriebssysteme mit verschiedenem Elektrifizierungsgrad entwickelt. Mitte der 1990er-Jahre kamen erste Fahrzeuge mit einem Hybridantrieb auf den Markt. Die Kombination aus Verbrennungs- und Elektromotor erlaubt eine Verbrauchsreduktion und Bremsenergierückgewinnung sowie lokal emissionsfreies Fahren. Y1 - 2023 SN - 978-3-662-65811-6 (Print) SN - 978-3-662-65812-3 (Online) U6 - http://dx.doi.org/10.1007/978-3-662-65812-3_5 N1 - Corresponding author: Heiner Hans Heimes SP - 69 EP - 106 PB - Springer Vieweg CY - Berlin ER - TY - THES A1 - Heindrichs, Maik T1 - Intrinsic Motion in Type : eine Bewegtbild Plakatreihe für das Düsseldorfer Schauspielhaus N2 - Gestaltung und Programmierung dynamischer Motion-Design Plakate zwecks Kommunikation der Theaterstücke des Düsseldorfer Schauspielhauses. Der Fokus liegt dabei auf der Typografie und ihrer intrinsischen Bewegung. Der technische Fortschritt bietet viele neue Möglichkeiten im Umgang mit Schrift. Diese Arbeit dient dazu, mithilfe von aktuellen Techniken einen neuen Ansatz im Bereich Gestaltung mit Schrift, sowie Variable Fonts, in Kombination mit Motion-Design aufzuzeigen. Dies wird anhand von Eigenschaften der Schrift und der inhaltlichen Ebene, ohne die Buchstaben dabei zu dekonstruieren, umgesetzt. Die Bewegungen werden dann in das Format Plakat übertragen und dargestellt. KW - Bewegtbild KW - Plakat KW - Animation KW - Variable Schriften KW - Schriftvarianten Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Heising, Michelle T1 - Nachhaltige Gestaltung im urbanen öffentlichen Raum : erneuerbare Energien in Begegnungsräume integrieren N2 - RƎURB (Reurbanization & Renewable Energy) ist ein Konzept zur Integration von erneuerbaren Energien in einen urbanen Begegnungsraum. Es beinhaltet das Design eines skulpturalen Kleinwindkraftwerks und eines Solar-Pavillons mit einer Sitzlandschaft für einen energieautarken, öffentlichen Platz. Durch die Integration eines W-LAN Hotspots und Lademöglichkeiten in der Sitzlandschaft bringt RƎURB nicht nur grünen Strom in die Stadt, sondern gewährleistet der Bevölkerung auch Zugang zur Digitalisierung und einen kostenlosen Arbeitsraum. Windturbine: Herkömmliche Windräder können in der Stadt nicht genutzt werden. Die RƎURB-Windsäule ist darauf spezialisiert, die urbanen Winde aus allen Richtungen aufzunehmen und funktioniert schon bei einem leichten Windstoß. Durch das elegante Design lassen sich die Technologien als ästhetischen Blickfang in das moderne Stadtbild integrieren. KW - Erneuerbare Energien KW - Urbane Gestaltung KW - Solarenergie KW - Windkraft KW - Architektur Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Herrmann, Luna T1 - Blind Shopping N2 - Das Einkaufen in Einkaufszentren oder Ladenstraßen ist für Menschen ohne Sehbehinderung eine selbstverständliche Tätigkeit. Für Menschen mit Sehbehinderung gibt es bis heute keine Möglichkeit, sich ohne Hilfe von Familienmitgliedern, Freund:innen oder Pflegepersonal in einem Einkaufszentrum zurechtzufinden. Genau dieses Problem löst "NAVON.". Er ist ein intelligenter und smarter Blindenstock, welcher durch Ultraschalldistanzsensoren frühzeitig Hindernisse erkennt und die Möglichkeit bietet, den Betroffenen durch das Einkaufszentrum zu lotsen. Die Logik des Systems liegt innerhalb des Handgriffs, welcher die wichtigsten Einstellungen bzgl. Sprache und haptischer Bedienelemente steuert. Ebenfalls gibt er dem Betroffenen auch ein haptisches Feedback, um Hindernisse frühzeitig umgehen zu können. "NAVON." ist ein wichtiger Ansatz für eine neue Kategorie von Produkten und Blindenstöcken. Darüber hinaus birgt das Konzept auch weitere Potenziale für öffentliche Gebäude (Ämter, Krankenhäuser, etc..). KW - Inklusion KW - Sehbehinderung KW - Einkaufen KW - Hindernisse KW - Blindenstock Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Hetterle, Lukas T1 - Breathe N2 - Ein nachhaltiges, autonomes Fahrzeug, das in einer extrem schnellen und hektischen Welt, geprägt durch Digitalisierung und Urbanisierung, einen Moment der Ruhe bieten soll; eine Pause von der ständigen Flut von Eindrücken und Informationen. Ein immersives Design, das meditative und kreative Prozesse unterstützt und Mensch-Mensch sowie Mensch-Natur Begegnungen fördert. KW - Mobilität KW - Automobil KW - Design KW - Fahrzeug KW - Ruhe Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Heuermann, Holger T1 - Hochfrequenztechnik. Komponenten und Mess-, Funk-, RFID- sowie Lokalisierungssysteme N2 - Dieses Lehr- und Fachbuch vermittelt anschaulich die Grundlagen der HF-Technik, gibt konkrete Beschreibungen für den Entwurf von linearen Komponenten aus Bauteilen wie auch Leitungen für High-Speed- und HF-Schaltungen. Dem Leser wird vermittelt, wie Bauteile modelliert und Schaltungen synthetisiert und optimiert werden. Mit Hilfe frei verfügbarer Simulationssoftware können GHz-Schaltungen selbst entwickelt werden. Viele Übungsbeispiele ermöglichen die Eigenkontrolle des Wissensstandes. Weiterhin werden komplexe nichtlineare Komponenten wie Hochfrequenzmischer, Oszillatoren und Synthesegeneratoren in ihrer Funktionalität dargestellt. Die neuen Mixed-Mode-Streuparameter sowie deren Leitungs- und Schaltungstechnik für Anwendungen der schnellen Digital- und der modernen HF-Technik sind ausführlich beschrieben. Es wird auf Systeme für folgende Bereiche eingegangen: Streuparametermesstechnik, verschiedene Funktechniken, UHF-RFID und Lokalisierung- und Ortung. Dem Leser wird somit ermöglicht, komplexe GHz-Schaltungen insbesondere mit Halbleiter-, SMD- und LTCC-Schaltungen zu entwickeln. Y1 - 2023 SN - 978-3-658-37825-7 (Print) SN - 978-3-658-37826-4 (eBook) PB - Springer Fachmedien CY - Wiesbaden ET - 4 ER - TY - BOOK A1 - Heuermann, Holger T1 - Mikrowellentechnik : Feldsimulation, nichtlineare Schaltungstechnik, Komponenten und Subsysteme, Plasmatechnik, Antennen und Ausbreitung N2 - Das Lehrbuch behandelt alle Aspekte, die den aktuellen Stand der GHz-Technik betreffen. Das Buch behandelt die verschiedenen numerischen Feldsimulationsverfahren. Mit vielen modernen Themen. KW - Elektrotechnik KW - Hochfrequenztechnik KW - Feldsimulation KW - Plasmatechnik KW - Antennen Y1 - 2023 SN - 978-3-658-41286-9 U6 - http://dx.doi.org/10.1007/978-3-658-41287-6 PB - Springer Vieweg CY - Wiesbaden ET - 2. Auflage ER - TY - CHAP A1 - Hille, Sebastian A1 - Stumpf, Eike A1 - Mayntz, Joscha A1 - Dahmann, Peter T1 - Prediction of sound exposure caused by a landing motor glider with recuperating propellers T2 - AIAA SCITECH 2023 Forum N2 - This paper presents an approach to predicting the sound exposure on the ground caused by a landing aircraft with recuperating propellers. The noise source along the trajectory of a flight specified for a steeper approach is simulated based on measurements of sound power levels and additional parameters of a single propeller placed in a wind tunnel. To validate the measured data/measurement results, these simulations are also supported by overflight measurements of a test aircraft. It is shown that the simple source models of propellers do not provide fully satisfactory results since the sound levels are estimated too low. Nevertheless, with a further reference comparison, margins for an acceptable increase in the sound power level of the aircraft on its now steeper approach path could be estimated. Thus, in this case, a +7 dB increase in SWL would not increase the SEL compared to the conventional approach within only 2 km ahead of the airfield. Y1 - 2023 U6 - http://dx.doi.org/10.2514/6.2023-0211 N1 - AIAA SCITECH 2023 Forum, 23-27 January 2023, National Harbor, MD & Online PB - AIAA ER - TY - THES A1 - Hoffmann, Jan-Peter T1 - Schlüter Projekt X N2 - Schlüter Projekt X ist die fiktive Reanimation des Traktorenherstellers Schlüter. Dabei geht es darum, auf Basis der originalen Traktoren eine moderne Maschine zu entwerfen, welche die bewährte und beliebte Formsprache mit moderner Technologie und aktuellen Funktionen verbindet, um den Anforderungen der modernen Landwirtschaft gerecht zu werden. Dazu wurde Projekt X stark modular aufgebaut. Die Fahrzeugkabine lässt sich um 180° drehen und gegebenenfalls durch ein vollkommen autonomes Modul austauschen. Die Reifen lassen sich bei Bedarf durch Ketten ersetzen. Projekt X wird elektronisch angetrieben, zur Vermeidung langer Ladezeiten lässt sich der gesamte Akkublock in der Motorhaube austauschen. KW - Traktor KW - Landwirtschaft KW - Landwirt KW - Schlüter KW - Schlepper Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Hoffmann, Noa T1 - SpineSans : Erkundung des generativen Potentials modularer Typografie N2 - Spine Sans – Erkundung des generativen Potenzials modularer Typografie. „Spine Sans“ ist eine dekorative Schriftfamilie, die mit modularen Limitationen gestaltet wurde. Kleinbuchstaben sind in eine obere und untere Hälfte unterteilt, zwischen denen Raum für spannende generative Effekte entsteht. Schriftzeichen und Effekte wurden unabhängig voneinander, aber auf dem gleichen Spaltenraster gestaltet und passen daher nahtlos zusammen. Beispielhafte Varianten der „Spines“ können in einem speziell programmierten Web-Interface an selbst geschriebenen Text erkundet werden. Die Galerie an Optionen präsentiert mögliche Resultate für die spielerische Kombination. Die zwei Schriftschnitte „Spine Sans Bold“ und „Spine Sans Double“ können auch gemischt werden. Weiter ergänzbar um maßgeschneiderte Varianten, kann „Spine Sans“ besonders in interaktiven oder animierten Medien effektiv verschiedenste Eindrücke vermitteln. KW - Typografie KW - Generative Gestaltung KW - Geometrisch KW - Modularität KW - Grotesk Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Hoffstadt, Kevin A1 - Cheenakula, Dheeraja A1 - Nikolausz, Marcell A1 - Krafft, Simone A1 - Harms, Hauke A1 - Kuperjans, Isabel T1 - Design and construction of a new reactor for flexible biomethanation of hydrogen JF - Fermentation N2 - The increasing share of renewable electricity in the grid drives the need for sufficient storage capacity. Especially for seasonal storage, power-to-gas can be a promising approach. Biologically produced methane from hydrogen produced from surplus electricity can be used to substitute natural gas in the existing infrastructure. Current reactor types are not or are poorly optimized for flexible methanation. Therefore, this work proposes a new reactor type with a plug flow reactor (PFR) design. Simulations in COMSOL Multiphysics ® showed promising properties for operation in laminar flow. An experiment was conducted to support the simulation results and to determine the gas fraction of the novel reactor, which was measured to be 29%. Based on these simulations and experimental results, the reactor was constructed as a 14 m long, 50 mm diameter tube with a meandering orientation. Data processing was established, and a step experiment was performed. In addition, a kLa of 1 h−1 was determined. The results revealed that the experimental outcomes of the type of flow and gas fractions are in line with the theoretical simulation. The new design shows promising properties for flexible methanation and will be tested. KW - methanation KW - plug flow reactor KW - bubble column KW - bio-methane KW - power-to-gas Y1 - 2023 U6 - http://dx.doi.org/10.3390/fermentation9080774 SN - 2311-5637 N1 - The article belongs to the Special Issue Fermentation Processes: Modeling, Optimization and Control VL - 9 IS - 8 SP - 1 EP - 16 PB - MDPI CY - Basel ER - TY - THES A1 - Hosseinpour, Seywan T1 - Velum : Zensur des Visuellen im Iran N2 - Dieses multimediale Projekt thematisiert Zensur aus verschiedenen Dimensionen in totalitären, religiös-patriarchalischen Ländern, insbesondere im Iran. Dadurch wird versucht, mit einem denunzierenden Ansatz zu zeigen, wie Bilder zensiert werden und welche Auswirkungen diese zensierten Bilder auf Betrachter:innen haben. Dabei ist es auch wichtig, wie das Unsichtbare analysiert und verstanden wird. Die Opposition zwischen dem Akt des Visualisierens/Sichtbarmachens und Verbergens/Unsichtbarmachens in den meisten Bildern impliziert die Dialektik von Verhüllung und Enthüllung. Das Projekt »Velum« ermöglicht es den Betrachter:innen, die Zensurpraktiken in totalitär-religiösen Ländern kennenzulernen und zu erfahren, inwieweit die Zensur das tägliche Leben durchdrungen und beeinflusst hat –in der Kunst, der Literatur, den Medien usw. Ein Phänomen, das sogar die Privatsphäre des Individuums beeinträchtigt. KW - Fotoinstallation KW - Multimedia KW - Siebdruck KW - Zensur KW - Selbstzensur Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Hotze, Larissa T1 - Ein Abschied auf Zeit : der Totenritus der Toraja N2 - Die Kultur der Tana Toraja haben einen ganz besonderen Umgang mit dem Tod. Verstorbene werden bis zu der eigentlichen Bestattung als „krank“ angesehen und solange im Alltag mit eingebunden, ganz so als ob es sich um eine noch lebende Person handelt. Der Totenritus kann mehrere Tage andauern und Familie und Freund reisen aus dem ganzen Land herbei, um dem Fest beizuwohnen. Hier geht niemand einsam und das Sterben ist sogar ein wichtiger Bestandteil des Lebens. Studien aus Deutschland hingegen zeigen, dass zunehmend einsamer gestorben wird. Außerdem ist der Tod weiterhin ein Tabuthema. Genau dort setzt die Ausstellung und die entstandene Publikation über die Toraja-Kultur an. Einblicke in den Umgang mit dem Tod anderer Länder regen zu Reflexion und Diskurs an. Gestalterisch gibt es immer wieder Kontaktpunkte, die das Zusammenspiel der Lebenden und dem Jenseits widerspiegeln. KW - Ausstellungsdesign KW - Editorial KW - Publikation KW - Sonderausstellung KW - Ausstellungskonzept Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - PAT A1 - Hüning, Felix T1 - Sensorvorrichtung zur Erfassung eines Magnetfelds sowie magnetbasiertes Sensorsystem zur Erfassung einer Bewegung eines beweglichen Objekts N2 - Eine Sensorvorrichtung (10;110;210;310;410) zur Erfassung eines Magnetfelds, mit einer Wiegand-Sensoreinheit (12;112;212) umfassend: • - mindestens zwei Wiegand-Drähte (20) und • - eine Spulenanordnung (22;122;222), die die mindestens zwei Wiegand-Drähte (20) radial umschließt und die • • • ein Sensorelement (26;126;226) und • • ein Triggerelement (28;128;228), durch das ein Triggermagnetfeld erzeugbar ist, bildet, ist bekannt. Um ein magnetbasiertes Sensorsystem (300;400) zur Erfassung einer Bewegung eines beweglichen Objekts (301;401) zu ermöglichen, das ohne externe Energieversorgung zuverlässig sowie energieeffizient arbeitet und kostengünstig hergestellt werden kann, ist bei der erfindungsgemäßen Sensorvorrichtung (10;110;210;310;410) eine Wiegand-Triggereinheit (14;14a) vorhanden, umfassend: • - einen Wiegand-Draht (30) und • - eine Trigger-Sensorspule (32), die den Wiegand-Draht (30) radial umschließt, wobei ein erstes Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem ersten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist und ein zweites Ende der Trigger-Sensorspule (32) der Wiegand-Triggereinheit (14;14a) mit einem zweiten Ende des Triggerelements (28;128;228) der Wiegand-Sensoreinheit (12;112;212) elektrisch verbunden ist. Auf diese Weise verstärkt ein in der Trigger-Sensorspule (32) erzeugter Impuls das Gesamtmagnetfeld, das auf die Wiegand-Drähte (20) in der Sensoreinheit einwirkt, derart, dass die Triggefeldstärke aller Wiegand-Drähte (20) überschritten wird und diese im wesentlichen zeitgleich auslösen. Y1 - 2023 N1 - Patent WO2023131396A1 ER - TY - CHAP A1 - Hüning, Felix A1 - Mund, Cindy T1 - Integration of agile development in standard labs T2 - 51st Annual Conference of the European Society for Engineering Education (SEFI) N2 - In addition to the technical content, modern courses at university should also teach professional skills to enhance the competencies of students towards their future work. The competency driven approach including technical as well as professional skills makes it necessary to find a suitable way for the integration into the corresponding module in a scalable and flexible manner. Agile development, for example, is essential for the development of modern systems and applications and makes use of dedicated professional skills of the team members, like structured group dynamics and communication, to enable the fast and reliable development. This paper presents an easy to integrate and flexible approach to integrate Scrum, an agile development method, into the lab of an existing module. Due to the different role models of Scrum the students have an individual learning success, gain valuable insight into modern system development and strengthen their communication and organization skills. The approach is implemented and evaluated in the module Vehicle Systems, but it can be transferred easily to other technical courses as well. The evaluation of the implementation considers feedback of all stakeholders, students, supervisor and lecturers, and monitors the observations during project lifetime. KW - professional skills KW - active learning KW - lab work KW - Agile development Y1 - 2023 U6 - http://dx.doi.org/10.21427/NK4Z-WS73 N1 - 51st Annual Conference of the European Society for Engineering Education, Technological University Dublin 10th-14th September, 2023 ER - TY - THES A1 - Jacobsen, Finn T1 - Designexperiments with Artificial Intelligence N2 - Künstliche Intelligenz (KI) hat die Designbranche erreicht, doch die Angst, dass KI Designer:innen die Arbeitsplätze wegnimmt, ist unbegründet. Künstliche Intelligenz kann Designer:innen als Werkzeug dienen. Durch das Zusammenspiel von Designer:innen und KI entstehen innerhalb von kürzester Zeit neuartige Kreationen. Das Projekt „Designexperiments with Artificial Intelligence“ ist eine Sammlung von visuellen Experimenten, welche mit der Hilfe von künstlicher Intelligenz durchgeführt wurden. Eines dieser Experimente wird in Form einer Installation ausgestellt. Dabei werden die Besucher*innen aufgefordert mit der Maschine zusammen ein Bild zu gestalten. Dieser Input wird anschließend von einer KI verarbeitet. Das Projekt „Designexperimente with Artificial Intelligence“ ist ein Versuch, mittels künstlicher Intelligenz eine neue Ästhetik zu finden. KW - Künstliche Intelligenz KW - Experimente KW - Installation KW - KI Kunst KW - Pix2Pix Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - BOOK A1 - Janser, Frank A1 - Havermann, Marc A1 - Hoeveler, Bastian A1 - Hertz, Cyril A1 - Bergmann, Ole T1 - Strömungslehre und Aerodynamik : inkompressible Profile und Tragflügelaerodynamik, Band 2 N2 - Das vorliegende Buch dient als Grundlage für die Bachelor- und Master-Ausbildung von Studierenden im Fachgebiet Strömungslehre und Aerodynamik. Im hier behandelten Teilbereich der inkompressiblen Profile und Tragflügelaerodynamik werden schwerpunktmäßig die folgenden Themen besprochen: - Profilaerodynamik - Tragflügelaerodynamik - Flugzeugpolare - Methoden zur Flugbereichserweiterung - Schwebeschub und Schwebeleistung - Propellerblattaerodynamik - Numerische Methoden zur Tragflügelberechnung Y1 - 2023 SN - 978-3-8107-0261-6 PB - Mainz CY - Aachen ET - 4. Auflage ER - TY - JOUR A1 - Janus, Kevin Alexander A1 - Achtsnicht, Stefan A1 - Drinic, Aleksander A1 - Kopp, Alexander A1 - Keusgen, Michael A1 - Schöning, Michael Josef T1 - Transient magnesium-based thin-film temperature sensor on a flexible, bioabsorbable substrate for future medical applications JF - Applied Research N2 - In this work, the bioabsorbable materials, namely fibroin, polylactide acid (PLA), magnesium and magnesium oxide are investigated for their application as transient, resistive temperature detectors (RTD). For this purpose, a thin-film magnesium-based meander-like electrode is deposited onto a flexible, bioabsorbable substrate (fibroin or PLA) and encapsulated (passivated) by additional magnesium oxide layers on top and below the magnesium-based electrode. The morphology of different layered RTDs is analyzed by scanning electron microscopy. The sensor performance and lifetime of the RTD is characterized both under ambient atmospheric conditions between 30°C and 43°C, and wet tissue-like conditions with a constant temperature regime of 37°C. The latter triggers the degradation process of the magnesium-based layers. The 3-layers RTDs on a PLA substrate could achieve a lifetime of 8.5 h. These sensors also show the best sensor performance under ambient atmospheric conditions with a mean sensitivity of 0.48 Ω/°C ± 0.01 Ω/°C. KW - Silk fibroin KW - Polylactide acid KW - Bioabsorbable KW - Resistive temperature detector Y1 - 2023 U6 - http://dx.doi.org/10.1002/appl.202300102 SN - 2702-4288 (Print) N1 - Corresponding author: Michael Josef Schöning IS - Accepted manuscript PB - Wiley-VCH ER - TY - JOUR A1 - Janus, Kevin Alexander A1 - Achtsnicht, Stefan A1 - Tempel, Laura A1 - Drinic, Aleksaner A1 - Kopp, Alexander A1 - Keusgen, Michael A1 - Schöning, Michael Josef T1 - Influence of fibroin membrane composition and curing parameters on the performance of a biodegradable enzymatic biosensor manufactured from Silicon-Free Carbon JF - Physica status solidi : pss. A, Applications and materials science N2 - Herein, fibroin, polylactide (PLA), and carbon are investigated for their suitability as biocompatible and biodegradable materials for amperometric biosensors. For this purpose, screen-printed carbon electrodes on the biodegradable substrates fibroin and PLA are modified with a glucose oxidase membrane and then encapsulated with the biocompatible material Ecoflex. The influence of different curing parameters of the carbon electrodes on the resulting biosensor characteristics is studied. The morphology of the electrodes is investigated by scanning electron microscopy, and the biosensor performance is examined by amperometric measurements of glucose (0.5–10 mM) in phosphate buffer solution, pH 7.4, at an applied potential of 1.2 V versus a Ag/AgCl reference electrode. Instead of Ecoflex, fibroin, PLA, and wound adhesive are tested as alternative encapsulation compounds: a series of swelling tests with different fibroin compositions, PLA, and Ecoflex has been performed before characterizing the most promising candidates by chronoamperometry. Therefore, the carbon electrodes are completely covered with the particular encapsulation material. Chronoamperometric measurements with H2O2 concentrations between 0.5 and 10 mM enable studying the leakage current behavior. KW - amperometric biosensors KW - biocompatible KW - biodegradabl KW - encapsulation materials KW - fibroin Y1 - 2023 U6 - http://dx.doi.org/10.1002/pssa.202300081 SN - 1862-6300 (Print) SN - 1862-6319 (Online) N1 - Corresponding author: Michael J. Schöning VL - 220 IS - 22 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Kappe, Lisa T1 - 59 von 47.900.000 Fußball-Fans N2 - Fan sein bedeutet für viele Menschen unterschiedliche Dinge. Viele würden sich selber vielleicht nicht mal als Solche bezeichnen. Nichtsdestotrotz gibt es etwas, das diese Gruppe von Menschen verbindet: Die gemeinsame Leidenschaft für eine bestimmte Sache, die sie im Alltag nicht missen wollen. In Deutschland alleine würden sich 47.900.000 Menschen selber als Fußball-Fan bezeichnen. Und natürlich lässt sich nicht jeder dieser Menschen in den selben Topf werfen. Die Publikation „59 von 47.900.00 Fußball-Fans“ beschäftigt sich mit 59 dieser Fans, verschiedenen Wissenschaftler*innen und Psycholog*innen, um dem Fan-Sein auf den Grund zu gehen. Warum sind Menschen überhaupt Fußball-Fans? Was macht Fan-Sein aus? Und wer sind diese Ultras? KW - Fans KW - Fußball KW - Fan-Kultur KW - Politik KW - Perspektive Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER - TY - THES A1 - Kappel, Jana Naomi T1 - KLIKK : ein smartes Kinderprodukt für den altersgerechten Einstieg in die digitale Welt N2 - Die neue Generation wird mit einer Medienwelt konfrontiert, welche nicht auf unsere kleinen Nutzer:innen ausgelegt ist. Die Verwendung von digitalen Medien hatte nie einen größeren Einfluss auf unsere Gesellschaft wie im Hier und Jetzt. Somit ist es von großer Relevanz, diese Nutzung kindergerechter zu gestalten und einen sicheren Rahmen für sie zu schaffen. Das Bachelorprojekt „KLIKK“ legt einen Lösungsentwurf für den altersgerechten Einstieg für Kinder in diese digitale Welt vor, um den richtigen Umgang mit Smartwatches und darauf aufbauende Medien zu ermöglichen und gleichzeitig einen pädagogischen Mehrwert zu bieten. Das didaktische Produktkonzept, welches explizit für Kinder designed wurde, beinhaltet das Erlernen des Uhrlesens und befriedigt das aufkommende Bedürfnis nach Vernetzung in einem sicheren System. Zudem fördert es die Autonomie und ist an die kindliche Motorik angepasst. Mitinitiator und Namensgeber für diese Konzeption ist die deutsche Kinderuhrenmarke KWIO. KLIKK inkludiert Sicherheit, die Freude am Lernen und bietet eine Möglichkeit, die Kleinen ganz groß in unsere digitale Welt aufzunehmen. KW - Smartwatch KW - conceptual design KW - industrial design KW - children Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Karry, Lena T1 - siso - lerne was du willst N2 - Kinder konsumieren heutzutage für viele Stunden am Tag soziale Medien. Jedoch sind die Inhalte auf diesen Plattformen oftmals nur oberflächlich und bieten wenig bis keinen Mehrwert durch z. B. zusätzliches Wissen. Dabei lernen Kinder einfacher, wenn ihr Interesse am Thema geweckt ist und sie Spaß an der Beschäftigung haben. Die individuellen Interessen der Kinder – und damit die möglichen Lerninhalte – sind vielfältig. Eine mögliche Lösung hierfür ist siso. Siso ist eine Lernplattform, die sich dadurch auszeichnet, dass Kinder ihren Interessen nachgehen sowie neue Fertigkeiten und Fähigkeiten erlernen können. Des Weiteren regt siso die Nutzer*innen durch Aufgaben dazu an, selbst aktiv zu werden. Durch die in der Anwendung verbaute soziale Komponente können Kinder sich auch über ihre Interessen austauschen und dadurch neue Freunde finden. KW - Lernen KW - Kinder KW - Interessen KW - Medienkompetenz KW - Eltern Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - JOUR A1 - Karschuck, Tobias A1 - Schmidt, Stefan A1 - Achtsnicht, Stefan A1 - Poghossian, Arshak A1 - Wagner, Patrick A1 - Schöning, Michael Josef T1 - Multiplexing system for automated characterization of a capacitive field-effect sensor array JF - Physica Status Solidi A N2 - In comparison to single-analyte devices, multiplexed systems for a multianalyte detection offer a reduced assay time and sample volume, low cost, and high throughput. Herein, a multiplexing platform for an automated quasi-simultaneous characterization of multiple (up to 16) capacitive field-effect sensors by the capacitive–voltage (C–V) and the constant-capacitance (ConCap) mode is presented. The sensors are mounted in a newly designed multicell arrangement with one common reference electrode and are electrically connected to the impedance analyzer via the base station. A Python script for the automated characterization of the sensors executes the user-defined measurement protocol. The developed multiplexing system is tested for pH measurements and the label-free detection of ligand-stabilized, charged gold nanoparticles. KW - Capacitive field-effect sensor KW - Gold nanoparticles KW - Label-free detection KW - Multicell KW - Multiplexing Y1 - 2023 U6 - http://dx.doi.org/10.1002/pssa.202300265 SN - 1862-6300 (Print) SN - 1862-6319 (Online) N1 - Corresponding author: Michael Josef Schöning VL - 220 IS - 22 PB - Wiley-VCH CY - Weinheim ER - TY - THES A1 - Katemann, Ronja Mairin T1 - Gaming for everyone : gender-inklusives Gaming Equipment N2 - Das Ausleben von Sexualität und Gender befindet sich im gesellschaftlichen Wandel. Vor allem junge Menschen lassen ihre Lebenswege nicht mehr von traditionellen Geschlechterrollen und -normen leiten. In einigen Bereichen ist das schon deutlich sichtbar, während andere Bereiche noch vor Herausforderungen stehen, wenn es um Inklusion, Akzeptanz und Repräsentation geht. Besonders betroffen ist dabei der Gamingbereich, der repräsentativ nach wie vor ein männlich-dominiertes Gebiet zu sein scheint und durch Vorurteile gegenüber Frauen und der LGBTQIA+ Community stigmatisiert ist. Die _FLUX Gaming Maus soll durch Gender-inklusives Design dazu beitragen, stereotype Rollenbilder in der Gaming Welt aufzubrechen und die Community nachhaltig wachsen zu lassen. Sie bietet dabei eine Alternative zu den „typisch männlich“ wirkenden Gaming Produkten auf dem Markt. Durch verschiedene Individualisierungsmöglichkeiten in Funktion und Gestalt kann _FLUX in einem Online-Konfigurator an den persönlichen Spielstil angepasst werden. So vermittelt _FLUX Zugehörigkeit und Repräsentation unabhängig von Geschlecht und bietet Spaß am Gaming für jede:n. KW - Produkt Design KW - Spiele KW - gendern KW - Gaming Produkte KW - Gaming Maus Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Kauffmann, Michael T1 - OpenCouch : Therapiesuche leicht gemacht. N2 - Die Auswirkungen psychischer Erkrankungen stellen ein zunehmendes Thema in unserer Gesellschaft dar. Allein in Deutschland erkranken jedes Jahr ein Viertel aller Menschen psychisch. Besonders seit der Pandemie wächst die Nachfrage nach psychotherapeutischer Behandlung stetig an, wodurch die Wartelisten in den Praxen immer länger werden. Betroffene müssen oft ein halbes Jahr oder länger auf einen Therapieplatz warten und sind gezwungen zu nehmen, was gerade frei ist. Dabei ist es für den Therapieerfolg essenziell, dass nicht nur die Therapie auf einen abgestimmt ist, sondern auch die Chemie zwischen Therapeut:in und Patient:in passt. OpenCouch ist eine Anwendung, die Betroffene bei der Therapieplatzsuche unterstützen soll, indem sie Informationen und Tools zur Verfügung stellt, um trotz der geringen Verfügbarkeit einen Therapieplatz finden zu können, der einen Behandlungserfolg garantiert. KW - Psychotherapie KW - Therapieplatzsuche KW - Therapeutensuche KW - Mental Health KW - UX-Design Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Keith, Anna-Lena T1 - KI und Sprache : explorativer Blick auf Word Embeddings im NLP N2 - Künstliche Intelligenz (KI) wird heute vielfältig eingesetzt, so auch im Bereich der Sprache. Persönliche Assistent:innen und Chatbots beeindrucken, da sie so etwas Vielschichtiges wie die menschliche Sprache beherrschen. Dass Maschinen dabei nur komplexen mathematischen Regeln folgen, ist den meisten klar. Doch was verbirgt sich hinter dem vermeintlichen „Sprachverständnis“ einer KI? Word Embeddings bilden eine numerische Repräsentation von Sprache ab und dienen einem Machine Learning Algorithmus als eine Art „Wortschatz“, mit dem gerechnet werden kann. Das Projekt bildet einen hundertdimensionalen Word Embedding Datensatz auf verschiedene Weise und mittels explorierbarer interaktiver Tools ab. Kombiniert mit Erklärungen und eigenen Erkenntnissen finden sich diese Tools in einem Blog, der fachfremden Einsteigenden ins Thema KI erste tiefergehende Einblicke „hinter die Kulissen“ bieten soll." KW - Datenvisualisierung KW - interaktiv KW - Generatives Design KW - Blog KW - Künstliche Intelligenz (KI) Y1 - 2023 PB - FH Aachen CY - Aachen ER - TY - THES A1 - Kieslich, Jasmina T1 - Roverandom : eine illustrative Aufarbeitung und Neuinterpretation des Kinderbuches von J.R.R Tolkien N2 - Die Geschichte „Roverandom“ von J.R.R Tolkien lädt auf eine spannende Reise an der Seite des kleinen Hundes Rover ein, welche zum Mond und in die Tiefsee, vorbei an Zauberern und Drachen führt. Um das Abenteuer Tolkiens neu aufleben zu lassen, befasst sich dieses Projekt mit der illustrativen Aufarbeitung der Geschichte. Auf Grundlage der Betrachtung von Inspirationen und eigenen Illustrationen des englischen Schriftstellers entwickelte sich eine einheitliche Gestaltung innerhalb des Projekts. Durch die Kombination analoger und digitaler Medien entstanden über 40 Illustrationen, welche verschiedenste Szenen visualisieren und so die Welt des kleinen Hundes Rover auf eine anschauliche Art und Weise darstellen. Die Geschichte „Roverandom“ wird so durch eine ganz eigene Bildsprache visuell begleitet und für interessierte Leser:innen neu geöffnet. KW - Illustration KW - Editorial KW - Roverandom KW - J.R.R Tolkien KW - analog Y1 - 2023 N1 - Für diese Arbeit steht kein Volltext zur Verfügung. PB - FH Aachen CY - Aachen ER -