TY  - JOUR
A1  - Jablonski, Melanie
A1  - Münstermann, Felix
A1  - Nork, Jasmina
A1  - Molinnus, Denise
A1  - Muschallik, Lukas
A1  - Bongaerts, Johannes
A1  - Wagner, Torsten
A1  - Keusgen, Michael
A1  - Siegert, Petra
A1  - Schöning, Michael Josef
T1  - Capacitive field‐effect biosensor applied for the detection of acetoin in alcoholic beverages and fermentation broths
JF  - physica status solidi (a) applications and materials science
N2  - An acetoin biosensor based on a capacitive electrolyte–insulator–semiconductor (EIS) structure modified with the enzyme acetoin reductase, also known as butane-2,3-diol dehydrogenase (Bacillus clausii DSM 8716ᵀ), is applied for acetoin detection in beer, red wine, and fermentation broth samples for the first time. The EIS sensor consists of an Al/p-Si/SiO₂/Ta₂O₅ layer structure with immobilized acetoin reductase on top of the Ta₂O₅ transducer layer by means of crosslinking via glutaraldehyde. The unmodified and enzyme-modified sensors are electrochemically characterized by means of leakage current, capacitance–voltage, and constant capacitance methods, respectively.
KW  - acetoin
KW  - acetoin reductase
KW  - alcoholic beverages
KW  - biosensors
KW  - capacitive field-effect sensors
Y1  - 2021
U6  - http://dx.doi.org/10.1002/pssa.202000765
SN  - 1862-6319
VL  - 218
IS  - 13
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Janus, Kevin Alexander
A1  - Fang, Anyelina C.
A1  - Drinic, Aleksander
A1  - Achtsnicht, Stefan
A1  - Köpf, Marius
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Thick-film carbon electrode deposited onto a biodegradable fibroin substrate for biosensing applications
JF  - Physica status solidi (a)
N2  - This study addresses a proof-of-concept experiment with a biocompatible screen-printed carbon electrode deposited onto a biocompatible and biodegradable substrate, which is made of fibroin, a protein derived from silk of the Bombyx mori silkworm. To demonstrate the sensor performance, the carbon electrode is functionalized as a glucose biosensor with the enzyme glucose oxidase and encapsulated with a silicone rubber to ensure biocompatibility of the contact wires. The carbon electrode is fabricated by means of thick-film technology including a curing step to solidify the carbon paste. The influence of the curing temperature and curing time on the electrode morphology is analyzed via scanning electron microscopy. The electrochemical characterization of the glucose biosensor is performed by amperometric/voltammetric measurements of different glucose concentrations in phosphate buffer. Herein, systematic studies at applied potentials from 500 to 1200 mV to the carbon working electrode (vs the Ag/AgCl reference electrode) allow to determine the optimal working potential. Additionally, the influence of the curing parameters on the glucose sensitivity is examined over a time period of up to 361 days. The sensor shows a negligible cross-sensitivity toward ascorbic acid, noradrenaline, and adrenaline. The developed biocompatible biosensor is highly promising for future in vivo and epidermal applications.
KW  - biocompatible materials
KW  - biodegradable electronic devices
KW  - biosensors
KW  - carbon electrodes
KW  - glucose
Y1  - 2022
U6  - http://dx.doi.org/10.1002/pssa.202200100
SN  - 1862-6319
N1  - Corresponding author: Michael J. Schöning
VL  - 219
IS  - 23
SP  - 1
EP  - 9
PB  - Wiley-VCH
CY  - Weinheim
ER  -