TY  - CHAP
A1  - Finger, Felix
A1  - de Vries, Reynard
A1  - Vos, Roelof
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A comparison of hybrid-electric aircraft sizing methods
T2  - AIAA Scitech 2020 Forum
Y1  - 2020
U6  - http://dx.doi.org/10.2514/6.2020-1006
N1  - AIAA Scitech 2020 Forum, Driving aerospace solutions for global challenges, Orlando, 06. - 10. January 2020
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Marino, Matthew
A1  - Bil, Cees
T1  - A highly automated method for simulating airfoil characteristics at low Reynolds number using a RANS - transition approach
T2  - Deutscher Luft- und Raumfahrtkongress - DLRK 2019. Darmstadt, Germany
Y1  - 2019
U6  - http://dx.doi.org/10.25967/490026
SP  - 1
EP  - 14
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - A Review of Configuration Design for Distributed Propulsion Transitioning VTOL Aircraft
T2  - Asia-Pacific International Symposium on Aerospace Technology 2017, APISAT 2017, Seoul, Korea
Y1  - 2017
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Finger, Felix
A1  - Marino, Matthew
A1  - Bil, Cees
A1  - Havermann, Marc
A1  - Braun, Carsten
T1  - A review of guidelines and best practices for subsonic aerodynamic simulations using RANS CFD
T2  - Asia-Pacific International Symposium on Aerospace Technology (APISAT), At Gold Coast, Australia, 04. - 06. Dezember 2019
Y1  - 2019
SN  - 978-1-925627-40-4
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Khalsa, R.
A1  - Kreyer, Jörg
A1  - Mayntz, Joscha
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Schmitz, O.
A1  - Bragard, Michael
T1  - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt
N2  - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - An Initial Sizing Methodology for Hybrid-Electric Light Aircraft
T2  - AIAA AVIATION Forum 2018 Aviation Technology, Integration, and Operations Conference, Atlanta, Georgia, June 25 - 29, 2018
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-4229
ER  - 
TY  - CHAP
A1  - Reimer, Lars
A1  - Braun, Carsten
A1  - Ballmann, Josef
T1  - Analysis of the static and dynamic aero-structural response of an elastic swept wing model by direct aeroelastic simulation
T2  - ICAS 2006 proceedings : 25th Congress of the International Council of the Aeronautical Sciences ; Hamburg, Germany, 3 - 8 September, 2006 : 25th International Congress of Aeronautical Sciences
Y1  - 2006
SN  - 0-9533991-7-6
SP  - Paper No. 2006-10.3.3
PB  - Optimage
CY  - Edinburgh
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Case studies in initial sizing for hybrid-electric general aviation aircraft
T2  - 2018 AIAA/IEEE Electric Aircraft Technologies Symposium, Cincinnati, Ohio
Y1  - 2018
U6  - http://dx.doi.org/10.2514/6.2018-5005
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Comparative assessment of parallel-hybrid-electric propulsion systems for four different aircraft
T2  - AIAA SciTech Forum 2020, 06.01.2020 - 10.01.2020, Orlando
Y1  - 2020
U6  - http://dx.doi.org/10.2514/6.2020-1502
ER  - 
TY  - CHAP
A1  - Bergmann, Ole
A1  - Götten, Falk
A1  - Braun, Carsten
A1  - Janser, Frank
T1  - Comparison and evaluation of blade element methods against RANS simulations and test data
T2  - CEAS Aeronautical Journal
N2  - This paper compares several blade element theory (BET) method-based propeller simulation tools, including an evaluation against static propeller ground tests and high-fidelity Reynolds-Average Navier Stokes (RANS) simulations. Two proprietary propeller geometries for paraglider applications are analysed in static and flight conditions. The RANS simulations are validated with the static test data and used as a reference for comparing the BET in flight conditions. The comparison includes the analysis of varying 2D aerodynamic airfoil parameters and different induced velocity calculation methods. The evaluation of the BET propeller simulation tools shows the strength of the BET tools compared to RANS simulations. The RANS simulations underpredict static experimental data within 10% relative error, while appropriate BET tools overpredict the RANS results by 15–20% relative error. A variation in 2D aerodynamic data depicts the need for highly accurate 2D data for accurate BET results. The nonlinear BET coupled with XFOIL for the 2D aerodynamic data matches best with RANS in static operation and flight conditions. The novel BET tool PropCODE combines both approaches and offers further correction models for highly accurate static and flight condition results.
KW  - BET
KW  - CFD propeller simulation
KW  - Propeller aerodynamics
KW  - Actuator disk modelling
KW  - Propeller performance
Y1  - 2022
U6  - http://dx.doi.org/10.1007/s13272-022-00579-1
SN  - 1869-5590 (Online)
SN  - 1869-5582 (Print)
N1  - Corresponding author: Ole Bergmann
VL  - 13
SP  - 535
EP  - 557
PB  - Springer
CY  - Wien
ER  -