TY - CHAP
A1 - Kraft, Bodo
A1 - Schneider, Gerd
T1 - Semantic Roomobjects for Conceptual Design Support : A Knowledge-based Approach
N2 - In: Computer Aided Architectural Design Futures 2005 2005, Part 4, 207-216, DOI: http://dx.doi.org/10.1007/1-4020-3698-1_19 The conceptual design at the beginning of the building construction process is essential for the success of a building project. Even if some CAD tools allow elaborating conceptual sketches, they rather focus on the shape of the building elements and not on their functionality. We introduce semantic roomobjects and roomlinks, by way of example to the CAD tool ArchiCAD. These extensions provide a basis for specifying the organisation and functionality of a building and free architects being forced to directly produce detailed constructive sketches. Furthermore, we introduce consistency analyses of the conceptual sketch, based on an ontology containing conceptual relevant knowledge, specific to one class of buildings.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2005
SN - 978-1-4020-3460-2
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Wilhelms, Nils
T1 - Visual Knowledge Specification for Conceptual Design
N2 - Proc. of the 2005 ASCE Intl. Conf. on Computing in Civil Engineering (ICCC 2005) eds. L. Soibelman und F. Pena-Mora, Seite 1-14, ASCE (CD-ROM), Cancun, Mexico, 2005 Current CAD tools are not able to support the fundamental conceptual design phase, and none of them provides consistency analyses of sketches produced by architects. To give architects a greater support at the conceptual design phase, we develop a CAD tool for conceptual design and a knowledge specification tool allowing the definition of conceptually relevant knowledge. The knowledge is specific to one class of buildings and can be reused. Based on a dynamic knowledge model, different types of design rules formalize the knowledge in a graph-based realization. An expressive visual language provides a user-friendly, human readable representation. Finally, consistency analyses enable conceptual designs to be checked against this defined knowledge. In this paper we concentrate on the knowledge specification part of our project.
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2005
ER -
TY - CHAP
A1 - Kraft, Bodo
A1 - Retkowitz, Daniel
T1 - Operationale Semantikdefinition für konzeptuelles Regelwissen
N2 - In: Forum Bauinformatik 2005 : junge Wissenschaftler forschen / [Lehrstuhl Bauinformatik, Brandenburgische Technische Universität Cottbus. Frank Schley ... (Hrsg.)]. - Cottbus : Techn. Universität 2005. S. 1-10 ISBN 3-934934-11-0
Mittels eines operationalen Ansatzes zur Semantikdefinition wird am Bei-spiel des konzeptuellen Gebäudeentwurfs ein Regelsystem formalisiert. Dazu werdenzwei Teile, zum einen das Regelwissen, zum anderen ein konzeptueller Entwurfsplan zunächst informell eingeführt und dann formal beschrieben. Darauf aufbauend wird die Grundlage für eine Konsistenzprüfung des konzeptuellen Entwurfs gegen das Regel-wissen formal angeben
KW - CAD
KW - CAD
KW - Bauingenieurwesen
KW - CAD
KW - civil engineering
Y1 - 2005
ER -
TY - BOOK
A1 - Merten, Sabine
T1 - Verbesserung der Ausbildung in der Mikrosystemtechnik - virtuelle Labore bereiten auf die Herstellung realer Drucksensoren vor (2 Fassungen: konvertiert und original
N2 - Die Ausbildung in Hochtechnologien wie beispielsweise der Mikrosystemtechnik ist oft durch einen hohen Grad an Komplexität charakterisiert. Damit verbunden sind hohe Kosten für die Errichtung und den Betrieb der speziellen Laborräume und ihre häufig geringe Verfügbarkeit für die Studierenden. Zukünftige Ingenieure sammeln während ihrer Ausbildung aus diesen Gründen nur in beschränktem Umfang praktische Erfahrungen. Die Industrie hingegen fordert Personal mit hoher fachlicher Kompetenz, also fundiertem theoretischen Wissen und umfangreichen praktischen Kenntnissen. Dieser Diskrepanz – qualifizierte Ingenieure auf der einen Seite und eine eher theoretisch ausgerichtete Ausbildung auf der anderen Seite – wird mit einem neuen Blended-Learning-Konzept für MST-Technologiepraktika begegnet. Lernende werden über ein virtuelles Labor, das einen echten Reinraum mit realen Anlagen simuliert, intensiv auf reale Laborpraktika vorbereitet. Dabei geht es im virtuellen Labor gleichermaßen um die Vermittlung von Theorie und Praxis. Nur trainierte Teilnehmer mit einer intensiven Vorbereitung sind in der Lage, relativ eigenständig ein echtes MST-Bauteil innerhalb des anschließenden einwöchigen Laborkurses zu fertigen. Die Wirksamkeit des Konzeptes und die Steigerung des Lernerfolges durch die kombinierten virtuellen und realen Laborkurse wurden im Rahmen der Dissertation begleitend untersucht. Die Ergebnisse flossen direkt in die Weiterentwicklung der Technologiepraktika ein. Die Konzepte und Erkenntnisse sind zudem sehr interessant für die Entwicklung von Blended-Learning-Angeboten in ähnlichen oder anderen Fachgebieten sowie für weitere Bildungseinrichtungen. (Die Dissertation liegt hier in 2 Fassungen vor: Die Originalfassung ist nur bei guter Rechnerausstattung und guter Netzanbindung nutzbar, die konvertierte Fassung ist unverändert, allerdings sind Qualitätseinbußen beim Ausdruck einiger Grafiken möglich)
N2 - Education in high technologies, like e.g. Microsystems technology, is usually characterized by a high degree of complexity. In addition it is usually connected with large economic efforts for invest, operation and maintenance of the special laboratory facilities. The access to such facilities for educational purposes is often quite limited. Therefore engineering students rather rarely gather practical experience in such technologies during their university studies. In contrast, industry has a large demand for engineers with high professional competence, i.e. profound theoretical knowledge combined with substantial practical experience. The newly developed blended learning concept for MST laboratory training tries to bridge the gap between the need for qualified engineers and the more theoretical university education. The learners prepare intensively for real hands-on clean room trainings with a virtual technology laboratory, i.e. a computer simulation of the clean room machines and the corresponding processes. In the virtual technology laboratory the students brush up their theoretical knowledge and at the same time learn to operate the complex clean room machines. Only well trained and intensively prepared students are capable to produce a fully functional MST component within a compact clean room laboratory course of only one week duration and an only modest amount of supervision. The effectivity of this concept and the increase of the learning success due to the specific mixture of virtual and real laboratory sessions has been accompanied and analysed by this dissertation. The results have been used to further improve the laboratory courses. Concepts and results are also very attractive for comparable blended learning proposals in other technical disciplines.
KW - Mikrosystemtechnik
KW - Virtuelles Laboratorium
KW - Lernprogramm
KW - Hochschule / Lehre / Evaluation
KW - Computersimulation
KW - Drucksensor
KW - Blended-Learning
KW - Reinraumpraktikum
KW - blended learning
KW - hands-on cleanroom training
Y1 - 2005
N1 - Zugl.: Saarbrücken, Univ., Diss., 2005
ER -
TY - JOUR
T1 - Fachblatt, Jahrgang 2005; Nr. 2
N2 - Institute 20 Jahre "Summer School Renewable Energy" Personen Prof. Dr.rer.nat. Dr.h.c. Gisela Engeln-Müllges geht in den Ruhestand Fachhochschul-Rektor Prof. Hermann-Josef Buchkremer geht in den Ruhestand Forschung "Badekultur in der Renaissance" Studenten an der Fachhochschule bauen Mini-Satellit Service Start von Cmpus, HIS QIS und neuem Webdesign "Join the best" - MLP bietet neue Chancen auf internationale Spitzenpraktika Forschungsergebnisse werden weltweit sichtbar Menschen an der FH Ein Bild entsteht zuerst im Kopf - die Diplom-Fotografin Jeanne Püttmann FH Aachen als Sprungbrett in luftige Höhen - Silke Lotties Auch mit 100 noch Flugbenzin im Blut! - Aachener Flugpionier Richard Perlia Zwischen Marathon und Studium - Angela Müller Einer der ersten Absolventen des Masterstudiengangs Facility Management - Mike Müller Aus den Fachbereichen Naturwissenschaften zum Anfassen: Lehrer zeigen hohe Motivation DIPLOMA 2005 - Derspringendepunkt Neue "Welten" erleben - Studierende beginnen ihren Auslandsaufenthalt Endlich der Sieg: Bauingenieure erfolgreich in der Wertung Bootskonstruktion Viele Fragen werden am Info-Tag Wirtschaftswissenschaften beantwortet Alumni Erster "Luft- und Raumfahrt" - Absolventenkongress Ein halbes Jahrhundert Bauingenieure Personalinfo Honorarprofessor Dr. Peter Lelkes Prof. Dr.-Ing. Günther Dahl Prof. Klaus Endrikat Prof. Dr.-Ing. Alexander Boeminghaus Prof. Dr. Narendra Bansal jetzt Rektor in Indien
T3 - Fachblatt / FH Aachen - 2005, 2
KW - Fachhochschule Aachen
KW - Fachhochschule Aachen
KW - Aachen University of Applied Sciences
Y1 - 2005
ER -
TY - JOUR
T1 - Fachblatt, Jahrgang 2005; Nr. 1
N2 - Forschung & Lehre FH Aachen: Spitzenplatz in Forschung und Entwicklung Erfolgreiche Weichenstellung für die Zukunft Capro steht nicht bloß für eine Studie Erste Absolventen des MBA-Studiengangs "Entrepreneurship" verabschiedet automotive and aerospace industries Eine Legende lebt - der Porsche 917-024 K 8. Tag der Forschung FH-Service Neues e-journal an der FH Aachen Das neue Online-Tutorial der Bibliothek Die Personalräte der FH Aachen Studieren mit Kind an der FH Aachen Personen Personal-Info Drei Fragen an... Prof. Gerhard Dikta Inna Brauer, eine erfolgreiche FH-Absolventin, startet durch Solar-Institut Jülich Neues aus dem Solar-Institut Jülich Kurz notiert "Merci papa, merci maman" Aus den Fachbereichen Forschung im Weltraum Wie real ist Science-Fiction? Tagung am Institut für Angewandte Polymerchemie
T3 - Fachblatt / FH Aachen - 2005, 1
KW - Fachhochschule Aachen
KW - Aachen University of Applied Sciences
Y1 - 2005
ER -
TY - CHAP
A1 - Gebhardt, Andreas
A1 - Schmidt, Frank-Michael
T1 - Farbige Prototypen als Werkzeug für den Konstrukteur
T1 - Colored prototypes as instrument for the constructing engineer
N2 - Physische Prototypen, also Anschauungs- und Funktionsmodelle nach den generativen oder Rapid Prototyping (RP) Verfahren haben sich in diesem Zusammenhang vor allem als Hilfsmittel zur effektiven Kommunikation und zur Evaluierung von Produkteigenschaften einen festen Platz in der Produktentstehung erworben. Die positiven Effekte der etablierten RP Verfahren sind unumstritten. Einfachere, schnellere und wirtschaftlichere Maschinen (Prototyper, Fabrikator), vor allem auch für die Büroumgebung, geben neue Impulse im Sinne der Optimierung der heutigen Verfahren. Eine neue Dimension verspricht die Option „Farbe“ der bisher fast ausschließlich monochromen Modelle. Ist Farbe nur „nice to have“ oder welchen Effekt haben farbige Modelle als Werkzeug von Konstrukteuren und Produktenwicklern? Welche Perspektiven bietet „Farbe“ darüber hinaus?
KW - Prototyping
KW - Rapid prototyping
KW - Prototypen
KW - Funktionsmodelle
KW - Produktentstehung
KW - Prototyper
KW - Produktenwicklung
KW - prototypes
KW - working models
KW - product emergence
KW - prototyper
KW - product development
Y1 - 2005
ER -
TY - CHAP
A1 - Schermutzki, Margret
T1 - Zur Bedeutung der Workload
N2 - Informationen zur Einführung von ECTS zur europäisch einheitlichen Bewertung von Studienleistungen Basierung der ECTS auf der tatsächlichen Arbeitsbelastung der Studierenden Möglichkeiten zur Ermittlung der Arbeitsbelastung
KW - Bologna-Prozess
KW - ECTS
KW - Arbeitsbelastung
KW - Europäisches Leistungspunktesystem
KW - Bewertung von Studienleistungen . Studierendenmobilität
KW - European Credit Transfer System
KW - Workload
Y1 - 2005
ER -
TY - JOUR
A1 - Staat, Manfred
T1 - Local and global collapse pressure of longitudinally flawed pipes and cylindrical vessels
N2 - Limit loads can be calculated with the finite element method (FEM) for any component, defect geometry, and loading. FEM suggests that published long crack limit formulae for axial defects under-estimate the burst pressure for internal surface defects in thick pipes while limit loads are not conservative for deep cracks and for pressure loaded crack-faces. Very deep cracks have a residual strength, which is modelled by a global collapse load. These observations are combined to derive new analytical local and global collapse loads. The global collapse loads are close to FEM limit analyses for all crack dimensions.
KW - Finite-Elemente-Methode
KW - Grenzwertberechnung
KW - Axialbelastung
KW - FEM
KW - Grenzwertberechnung
KW - Axialbelastung
KW - Traglastanalyse
KW - Limit analysis
KW - Global and local collapse
KW - Axially cracked pipe
KW - Pressure loaded crack-face
Y1 - 2005
ER -
TY - JOUR
A1 - Staat, Manfred
T1 - Direct finite element route for design-by-analysis of pressure components
N2 - In the new European standard for unfired pressure vessels, EN 13445-3, there are two approaches for carrying out a Design-by-Analysis that cover both the stress categorization method (Annex C) and the direct route method (Annex B) for a check against global plastic deformation and against progressive plastic deformation. This paper presents the direct route in the language of limit and shakedown analysis. This approach leads to an optimization problem. Its solution with Finite Element Analysis is demonstrated for mechanical and thermal actions. One observation from the examples is that the so-called 3f (3Sm) criterion fails to be a reliable check against progressive plastic deformation. Precise conditions are given, which greatly restrict the applicability of the 3f criterion.
KW - Einspielen
KW - Plastizität
KW - Deformation
KW - Analytischer Zulaessigkeitsnachweis
KW - Einspiel-Analyse
KW - fortschreitende plastische Deformation
KW - alternierend Verformbarkeit
KW - Einspiel-Kriterium
KW - Design-by-analysis
KW - Shakedown analysis
KW - Progressive plastic deformation
KW - Alternating plasticity
KW - Shakedown criterion
Y1 - 2005
ER -