TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Matthies, Hermann G.
A1  - Stavroulakis, Georgios Eleftherios
A1  - Staat, Manfred
T1  - Direct plastic structural design by chance constrained programming
T2  - 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK
N2  - We propose a stochastic programming method to analyse limit and shakedown of structures under random strength with lognormal distribution. In this investigation a dual chance constrained programming algorithm is developed to calculate simultaneously both the upper and lower bounds of the plastic collapse limit or the shakedown limit. The edge-based smoothed finite element method (ES-FEM) using three-node linear triangular elements is used.
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Kahmann, Stephanie Lucina
A1  - Uschok, Stephan
A1  - Wegmann, Kilian
A1  - Müller, Lars-P.
A1  - Staat, Manfred
T1  - Biomechanical multibody model with refined kinematics of the elbow
T2  - 6th European Conference on Computational Mechanics (ECCM 6), 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11-15 June 2018, Glasgow, UK
N2  - The overall objective of this study is to develop a new external fixator, which closely maps the native kinematics of the elbow to decrease the joint force resulting in reduced rehabilitation time and pain. An experimental setup was designed to determine the native kinematics of the elbow during flexion of cadaveric arms. As a preliminary study, data from literature was used to modify a published biomechanical model for the calculation of the joint and muscle forces. They were compared to the original model and the effect of the kinematic refinement was evaluated. Furthermore, the obtained muscle forces were determined in order to apply them in the experimental setup. The joint forces in the modified model differed slightly from the forces in the original model. The muscle force curves changed particularly for small flexion angles but their magnitude for larger angles was consistent.
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Schulze, Sven
A1  - Mühleisen, M.
A1  - Feyerl, Günter
T1  - Adaptive energy management strategy for a heavy-duty truck with a P2-hybrid topology
T2  - 18. Internationales Stuttgarter Symposium. Proceedings
Y1  - 2018
U6  - https://doi.org/10.1007/978-3-658-21194-3
SP  - 75
EP  - 89
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Harzheim, Thomas
A1  - Heuermann, Holger
T1  - Phase Repeatable Synthesizers as a New Harmonic Phase Standard for Nonlinear Network Analysis
T2  - IEEE Transactions on Microwave Theory and Techniques
Y1  - 2018
U6  - https://doi.org/10.1109/TMTT.2018.2817513
SP  - 1
EP  - 8
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Blome, Hans-Joachim
T1  - Über die kulturelle Bedeutung der Raumfahrt
T2  - Überleben im Weltraum. Auf dem Weg zu neuen Grenzen. 21. Berliner Kolloquium der Daimler und Benz Stiftung 24. Mai 2017
Y1  - 2018
SP  - 5
EP  - 5
ER  - 
TY  - CHAP
A1  - Scholl, Ingrid
A1  - Suder, Sebastian
A1  - Schiffer, Stefan
T1  - Direct Volume Rendering in Virtual Reality
T2  - Bildverarbeitung für die Medizin 2018
Y1  - 2018
SN  - 978-3-662-56537-7
U6  - https://doi.org/10.1007/978-3-662-56537-7_79
SP  - 297
EP  - 302
PB  - Springer Vieweg
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Schreiber, Marc
A1  - Kraft, Bodo
A1  - Zündorf, Albert
T1  - NLP Lean Programming Framework: Developing NLP Applications More Effectively
T2  - Proceedings of NAACL-HLT 2018: Demonstrations, New Orleans, Louisiana, June 2 - 4, 2018
N2  - This paper presents NLP Lean Programming
framework (NLPf), a new framework
for creating custom natural language processing
(NLP) models and pipelines by utilizing
common software development build systems.
This approach allows developers to train and
integrate domain-specific NLP pipelines into
their applications seamlessly. Additionally,
NLPf provides an annotation tool which improves
the annotation process significantly by
providing a well-designed GUI and sophisticated
way of using input devices. Due to
NLPf’s properties developers and domain experts
are able to build domain-specific NLP
applications more efficiently. NLPf is Opensource
software and available at https://
gitlab.com/schrieveslaach/NLPf.
Y1  - 2018
U6  - https://doi.org/10.18653/v1/N18-5001 
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Staat, Manfred
ED  - Fernandes, P.R.
ED  - Tavares, J. M.
T1  - Pectopexy to repair vaginal vault prolapse: a finite element approach
T2  - Proceedings CMBBE 2018
N2  - The vaginal prolapse after hysterectomy (removal of the uterus) is often associated with the prolapse of the vaginal vault, rectum, bladder, urethra or small bowel. Minimally
invasive surgery such as laparoscopic sacrocolpopexy and pectopexy are widely performed for the treatment of the vaginal prolapse with weakly supported vaginal vault after hysterectomy using prosthetic mesh implants to support (or strengthen) lax apical ligaments. Implants of different shape, size and polymers are selected depending on the patient’s anatomy and the surgeon’s preference. In this computational study on pectopexy, DynaMesh®-PRP soft, GYNECARE GYNEMESH® PS Nonabsorbable PROLENE® soft and Ultrapro® are tested in a 3D finite element model of the female pelvic floor. The mesh model is implanted into the extraperitoneal space and sutured to the vaginal stump with a bilateral fixation to the iliopectineal ligament at both sides. Numerical simulations are conducted at rest, after surgery and during Valsalva maneuver with weakened tissues modeled by reduced tissue stiffness. Tissues and prosthetic meshes are modeled as incompressible, isotropic hyperelastic materials. The positions of the organs are calculated with respect to the pubococcygeal line (PCL) for female pelvic floor at rest, after repair and during Valsalva maneuver using the three meshes.
Y1  - 2018
N1  - 15th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering and 3rd Conference on Imaging and Visualization. CMBBE 2018. 26-29 March 2018, Lisbon, Portugal
ER  - 
TY  - CHAP
A1  - Bindzus, Manuel
A1  - Bragard, Michael
T1  - Motivating Intuitive Understanding of the Switched Reluctance Machine in the Education of Undergraduate Students
T2  - 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
Y1  - 2018
SN  - 978-1-5386-6903-7
U6  - https://doi.org/10.1109/RTUCON.2018.8659870
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Hoek, Hauke van
A1  - Hoegen, Anne von
A1  - Doncker, Rik W. De
T1  - Motivation-based Learning: Teaching Fundamentals of Electrical Engineering with an LED Spinning Top
T2  - 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
Y1  - 2018
SN  - 978-1-5386-6903-7
U6  - https://doi.org/10.1109/RTUCON.2018.8659810
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Rütters, René
A1  - Weinheimer, Marius
A1  - Bragard, Michael
T1  - Teaching Control Theory with a Simplified Helicopter Model and a Classroom Fitting Hardware Test-Bench
T2  - 2018 IEEE 59th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
Y1  - 2018
SN  - 978-1-5386-6903-7
U6  - https://doi.org/10.1109/RTUCON.2018.8659871
ER  - 
TY  - CHAP
A1  - Birkl, Josef
A1  - Diendorfer, Gerhard
A1  - Kern, Alexander
A1  - Thern, Stephan
T1  - Extremely high lightning peak currents
T2  - 34th International Conference on Ligntning Protection, 02-07 September 2018
Y1  - 2018
SN  - 978-1-5386-6635-7
ER  - 
TY  - CHAP
A1  - Götten, Falk
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Gomez, Francisco
A1  - Bil, Cees
T1  - On the Applicability of Empirical Drag Estimation Methods for Unmanned Air Vehicle Design   Read More: https://arc.aiaa.org/doi/10.2514/6.2018-3192
T2  - 2018 Aviation Technology, Integration, and Operations Conference, AIAA AVIATION Forum
Y1  - 2018
U6  - https://doi.org/10.2514/6.2018-3192
SN  - 1533-385X
N1  - AIAA 2018-3192
SP  - Article 3192
ER  - 
TY  - CHAP
A1  - Grundmann, Jan Thimo
A1  - Bauer, Waldemar
A1  - Borchers, Kai
A1  - Dumont, Etienne
A1  - Grimm, Christian D.
A1  - Ho, Tra-Mi
A1  - Jahnke, Rico
A1  - Lange, Caroline
A1  - Maiwald, Volker
A1  - Mikulz, Eugen
A1  - Quantius, Dominik
A1  - Reershemius, Siebo
A1  - Renger, Thomas
A1  - Riemann, Johannes
A1  - Sasaki, Kaname
A1  - Seefeldt, Patric
A1  - Spietz, Peter
A1  - Spröwitz, Tom
A1  - Toth, Norbert
A1  - Wejmo, Elisabet
A1  - Biele, Jens
A1  - Krause, Christian
A1  - Cerotti, Matteo
A1  - Peloni, Alessandro
A1  - Dachwald, Bernd
T1  - Small Spacecraft Solar Sailing for Small Solar System Body Multiple Rendezvous and Landing
T2  - 2018 IEEE Aerospace Conference : 3-10 March 2018
Y1  - 2018
SN  - 978-1-5386-2014-4
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Marinkovic, Marko
T1  - Damage reduction system for masonry infill walls under seismic loading
T2  - ce/papers
N2  - Reinforced concrete (RC) frames with masonry infills are frequently used in seismic regions all over the world. Generally masonry infills are considered as nonstructural elements and thus are typically neglected in the design process. However, the observations made after strong earthquakes have shown that masonry infills can modify the dynamic behavior of the structure significantly. The consequences were total collapses of buildings and loss of human lives. This paper presents the new system INODIS (Innovative Decoupled Infill System) developed within the European research project INSYSME (Innovative Systems for Earthquake Resistant Masonry Enclosures in RC Buildings). INODIS decouples the frame and the masonry infill by means of special U-shaped rubbers placed in between frame and infill. The effectiveness of the system was investigated by means of full scale tests on RC frames with masonry infills subjected to in-plane and out-of-plane loading. Furthermore small specimen tests were conducted to determine material characteristics of the components and the resistances of the connections. Finally, a micromodel was developed to simulate the in-plane behavior of RC frames infilled with AAC blocks with and without installation of the INODIS system.
KW  - earthquakes
KW  - in-plane and out-of-plane failure
KW  - INODIS
KW  - RC frames
Y1  - 2018
U6  - https://doi.org/10.1002/cepa.863
N1  - Special Issue: ICAAC ‐ 6th International Conference on Autoclaved Aerated Concrete
VL  - 2
IS  - 4
SP  - 267
EP  - 273
PB  - Ernst & Sohn Verlag
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Hansen, Frank
A1  - Laack, Walter van
T1  - Schnittstelle Tod: Sind Religionen religiös und Wissenschaften wissend?
Y1  - 2018
SN  - 978-3-936624-36-6
N1  - Tagungsband des 5. Seminars mit dem gleichnamigen Titel vom 4. November 2017 in Aachen / Hansen, Frank [Interviewer] ; van Laack, Walter [Herausgeber] ; ...
PB  - van Laack GmbH
CY  - Aachen
ER  - 
TY  - CHAP
A1  - Bücking, Henrik
A1  - Pfaff, Raphael
A1  - Dirksmeier, Roger
T1  - Sensor positioning and thermal model for condition monitoring of pressure gas reservoirs in vehicles
T2  - Proceedings of the Fourth European Conference of the Prognostics and Health Management Society, Utrecht, Netherlands, 2018
Y1  - 2018
ER  - 
TY  - CHAP
A1  - Gao, H.
A1  - Babilon, Katharina
A1  - Pfaff, Raphael
A1  - Gan, F.
A1  - Reich, A.
T1  - Model of wheel-rail contact for sanding and adhesion enhancement
T2  - Proceedings of the 11th International Conference on Contact Mechanics and Wear of Rail/wheel Systems, CM 2018
Y1  - 2018
SN  - 978-946186963-0
SP  - 314
EP  - 321
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
T1  - Railway Challenge 2018 - Ein Wettbewerb für Parkbahn-Lokomotiven
T2  - Deine Bahn
Y1  - 2018
SN  - 0948-7263
SP  - 22
EP  - 24
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Melcher, Karin
A1  - Franzen, Julian
T1  - Rare event simulation to optimise maintenance intervals of safety critical redundant subsystems
T2  - Proceedings of the European Conference of the PHM Society
Y1  - 2018
VL  - 4
IS  - 1
SP  - 1
EP  - 6
ER  -