TY  - CHAP
A1  - Martin, Joachim
T1  - Bemessung von Baukonstruktionen
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_1
SP  - 1
EP  - 11
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Martin, Joachim
T1  - Betriebsorganisation
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_10
SP  - 255
EP  - 272
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Marinković, Marko
A1  - Butenweg, Christoph
ED  - Papadrakakis, Manolis
ED  - Fragiadakis, Michalis
T1  - Experimental and numerical analysis of RC frames with decoupled masonry infills
T2  - 7th ECCOMAS Thematic Conference on Computational Methods in Structural Dynamics and Earthquake Engineering
N2  - Masonry infill walls are commonly used in reinforced concrete (RC) frame structures, also in seismically active areas, although they often experience serious damage during earthquakes. One of the main reasons for their poor behaviour is the connection to the frame, which is usually constructed using mortar. This paper describes the novel solution for infill/frame connection based on application of elastomeric material between them. The system called INODIS (Innovative Decoupled Infill System) has the aim to postpone the activation of infill in in-plane direction and at the same time to provide sufficient out-of-plane support. First, experimental tests on infilled frame specimens are presented and the comparison of the results between traditionally infilled frames and infilled frames with the INODIS system are given. The results are then used for calibration and validation of numerical model, which can be further employed for investigating the influence of some material parameters on the behaviour of infilled frames with the INODIS system.
KW  - Earthquake
KW  - In-plane
KW  - Out-of-plane
KW  - Isolation
KW  - Seismic
Y1  - 2019
SN  - 978-618-82844-5-6
U6  - http://dx.doi.org/10.7712/120119.7088.18845
SN  - 2623-3347
N1  - COMPDYN 2019, 24-26 June 2019, Crete, Greece.
SP  - 2464
EP  - 2479
PB  - National Technical University of Athens
CY  - Athen
ER  - 
TY  - JOUR
A1  - Marinkovic, Marko
A1  - Butenweg, Christoph
T1  - Innovative decoupling system for the seismic protection of masonry infill walls in reinforced concrete frames
JF  - Engineering Structures
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.engstruct.2019.109435
SN  - 0141-0296
VL  - 197
IS  - Article 109435
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Malik, A. M.
A1  - Abdieva, G. Zh.
A1  - Ualieva, P. S.
A1  - Zhubanova, A. A.
A1  - Temiz Artmann, Aysegül
T1  - CКPИНИНГ МИКPOOPГAНИЗМOВ-ДECТPУКТOPOВ XЛOРOPГAНИЧECКИX ЗAГPЯЗНИТEЛEЙ
T1  - Screening of microorganisms – destructors of chlororganic pollutants
JF  - Eurasian Journal of Ecology
Y1  - 2019
SN  - 2617-7358
VL  - 61
IS  - 4
SP  - 61
EP  - 71
ER  - 
TY  - CHAP
A1  - Mahdi, Zahra
A1  - Rendón, Carlos
A1  - Schwager, Christian
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Novel concept for indirect solar-heated methane reforming
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - http://dx.doi.org/10.1063/1.5117694
SN  - 0094-243X
VL  - 2126
SP  - 180014-1
EP  - 180014-7
PB  - AIP Publishing
CY  - Melville, NY
ER  - 
TY  - JOUR
A1  - Lyons, W. Berry
A1  - Mikucki, Jill A.
A1  - German, Laura A.
A1  - Welch, Kathleen A.
A1  - Welch, Susan A.
A1  - Gardener, Christopher B.
A1  - Tulaczyk, Slawek M.
A1  - Pettit, Erin C.
A1  - Kowalski, Julia
A1  - Dachwald, Bernd
T1  - The Geochemistry of Englacial Brine from Taylor Glacier, Antarctica
JF  - Journal of Geophysical Research: Biogeosciences
Y1  - 2019
U6  - http://dx.doi.org/10.1029/2018JG004411
SN  - 2169-8961
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - CHAP
A1  - Ludowicy, Jonas
A1  - Rings, René
A1  - Finger, Felix
A1  - Braun, Carsten
A1  - Bil, Cees
T1  - Impact of Propulsion Technology Levels on the Sizing and Energy Consumption for Serial HybridElectric General Aviation Aircraft
T2  - Asia Pacific International Symposium on Aerospace Technology. APISAT 2019
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Lorenz, Imke-Sophie B.
A1  - Altherr, Lena
A1  - Pelz, Peter F.
T1  - Graph-theoretic resilience analysis of a water distribution system's topology
T2  - World Congress on Resilience, Reliability and Asset Management 2019
N2  - Water suppliers are faced with the great challenge of achieving high-quality and, at the same time, low-cost water supply. In practice, the focus is set on the most beneficial maintenance measures and/or capacity adaptations of existing water distribution systems (WDS). Since climatic and demographic influences will pose further challenges in the future, the resilience enhancement of WDS, i.e. the enhancement of their capability to withstand and recover from disturbances, has been in particular focus recently. To assess the resilience of WDS, metrics based on graph theory have been proposed. In this study, a promising approach is applied to assess the resilience of the WDS for a district in a major German City. The conducted analysis provides insight into the process of actively influencing the
resilience of WDS
KW  - Resilience Assessment
KW  - Graph Theory
KW  - Water Supply System
KW  - Case Study
Y1  - 2019
N1  - World Congress on Resilience, Reliability and Asset Management, 28-31 July 2019. Furama Riverfront Hotel, Singapore
SP  - 106
EP  - 109
ER  - 
TY  - JOUR
A1  - Linder, Peter
A1  - Beckler, Matthias
A1  - Doerr, Leo
A1  - Stoelzle-Feix, Sonja
A1  - Fertig, Niels
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Gossmann, Matthias
T1  - A new in vitro tool to investigate cardiac contractility under physiological mechanical conditions
JF  - Journal of Pharmacological and Toxicological Methods
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.vascn.2019.05.162
SN  - 1056-8719
VL  - 99
IS  - Article number 106595
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Limpert, Nicolas
A1  - Wiesen, Patrick
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Schiffer, Stefan
T1  - The ROSIN Project and its Outreach to South Africa
JF  - R&D Journal
Y1  - 2019
VL  - 35
SP  - 1
EP  - 6
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Birgel, Stefan
A1  - Hackl, Michael
A1  - Staat, Manfred
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - A musculoskeletal shoulder simulation of moment arms and joint reaction forces after medialization of the supraspinatus footprint in rotator cuff repair
JF  - Computer Methods in Biomechanics and Biomedical Engineering
Y1  - 2019
U6  - http://dx.doi.org/10.1080/10255842.2019.1572749
IS  - Early view
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Leschinger, Tim
A1  - Besch, Katharina
A1  - Aydin, Cansu
A1  - Staat, Manfred
A1  - Scaal, Martin
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique
JF  - The Orthopaedic Journal of Sports Medicine
Y1  - 2019
U6  - http://dx.doi.org/10.1177/2325967119864590
VL  - 7
IS  - 8
SP  - 1
EP  - 5
ER  - 
TY  - CHAP
A1  - Lemke, Jörg
T1  - Arbeitssicherheit
T2  - Übungsaufgaben und Berechnungen für den Baubetrieb
Y1  - 2019
SN  - 978-3-658-23127-9
U6  - http://dx.doi.org/10.1007/978-3-658-23127-9_12
SP  - 335
EP  - 344
PB  - Springer Vieweg
CY  - Wiesbaden
ER  - 
TY  - CHAP
A1  - Leise, Philipp
A1  - Altherr, Lena
A1  - Simon, Nicolai
A1  - Pelz, Peter F.
T1  - Finding global-optimal gearbox designs for battery electric vehicles
T2  - Optimization of complex systems - theory, models, algorithms and applications : WCGO 2019
N2  - In order to maximize the possible travel distance of battery electric vehicles with one battery charge, it is mandatory to adjust all components of the powertrain carefully to each other. While current vehicle designs mostly simplify the powertrain rigorously and use an electric motor in combination with a gearbox with only one fixed transmission ratio, the use of multi-gear systems has great potential. First, a multi-speed system is able to improve the overall energy efficiency. Secondly, it is able to reduce the maximum momentum and therefore to reduce the maximum current provided by the traction battery, which results in a longer battery lifetime. In this paper, we present a systematic way to generate multi-gear gearbox designs that—combined with a certain electric motor—lead to the most efficient fulfillment of predefined load scenarios and are at the same time robust to uncertainties in the load. Therefore, we model the electric motor and the gearbox within a Mixed-Integer Nonlinear Program, and optimize the efficiency of the mechanical parts of the powertrain. By combining this mathematical optimization program with an unsupervised machine learning algorithm, we are able to derive global-optimal gearbox designs for practically relevant momentum and speed requirements.
KW  - Powertrain
KW  - Gearbox
KW  - Optimization
KW  - BEV
KW  - WLTP
Y1  - 2019
SN  - 978-3-030-21802-7
U6  - http://dx.doi.org/10.1007/978-3-030-21803-4_91
SP  - 916
EP  - 925
PB  - Springer
CY  - Cham
ER  - 
TY  - BOOK
A1  - Laack, Walter van
T1  - Weltbilder gestern und heute – Was bleibt und worüber lacht man morgen?
T3  - Vorträge & Einsichten, Lectures & Insights
Y1  - 2019
SN  - ISBN 978-3936624-44-1
IS  - Band 2
PB  - van Laack Buchverlag
CY  - Aachen
ER  - 
TY  - CHAP
A1  - König, Johannes Alexander
A1  - Kaiser, Steffen
A1  - Wolf, Martin
T1  - Entwicklung und Evaluierung eines Regeleditors für die grafische Erstellung von „Smart Living Environment“-Services
T2  - Angewandte Forschung in der Wirtschaftsinformatik 2019 : Tagungsband zur 32. AKWI-Jahrestagung / hrsg. von Martin R. Wolf, Thomas Barton, Frank Herrmann, Vera G. Meister, Christian Müller, Christian Seel
N2  - In diesem Paper wird die Entwicklung und Evaluation eines grafischen Regeleditors für das Erstellen von „Smart Living Environments“-Services vorgestellt. Dafür werden zunächst die Deduktion und Implementierung des grafischen Regeleditors erläutert. Anschließend wird eine Probandenstudie vorgestellt, in welcher der Mehrwert bezogen auf die Aspekte Zeit, Fehleranfälligkeit und Gebrauchstauglichkeit festgestellt wird.
Y1  - 2019
SN  - 978-3-944330-62-4
SP  - 234
EP  - 243
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - JOUR
A1  - Kurz, Melanie
T1  - Images of Sweden in Germany: from Sundborn and Bullerby to Ikea
JF  - nomad: the magazine for new design culture, business affairs and contemporary lifestyle
Y1  - 2019
SN  - 2513-0714
IS  - 8
SP  - 136
EP  - 147
ER  - 
TY  - CHAP
A1  - Kurz, Melanie
T1  - Betrifft Design : von historischen Zukunftsperspektiven zu gegenwärtigen Vergangenheitssehnsüchten
T2  - Positionen des Neuen : Zukunft im Design
Y1  - 2019
SN  - 978-3-89986-301-7
SP  - 136
EP  - 144
PB  - avedition
CY  - Stuttgart
ER  -