TY  - JOUR
A1  - Hauser, C.
A1  - Kotliar, Konstantin
A1  - Tholen, S.
A1  - Hasenau, A.
A1  - Suttmann, Y.
A1  - Renders, L.
A1  - Heemann, U.
A1  - Baumann, M.
A1  - Schmaderer, C.
T1  - Dynamische retinale Gefäßreaktion bei Hämodialysepatienten
JF  - Nieren- und Hochdruckkrankheiten
Y1  - 2015
U6  - https://doi.org/10.5414/NHX01743a
SN  - 0300-5224
VL  - 44
IS  - 11
SP  - 480
EP  - 480
PB  - Dustri-Verlag
CY  - Oberhaching
ER  - 
TY  - JOUR
A1  - Hamad, E. M.
A1  - Bilatto, S. E. R.
A1  - Adly, N. Y.
A1  - Correa, D. S.
A1  - Wolfrum, B.
A1  - Schöning, Michael Josef
A1  - Offenhäusser, A.
A1  - Yakushenko, A.
T1  - Inkjet printing of UV-curable adhesive and dielectric inks for microfluidic devices
JF  - Lab on a Chip
N2  - Bonding of polymer-based microfluidics to polymer substrates still poses a challenge for Lab-On-a-Chip applications. Especially, when sensing elements are incorporated, patterned deposition of adhesives with curing at ambient conditions is required. Here, we demonstrate a fabrication method for fully printed microfluidic systems with sensing elements using inkjet and stereolithographic 3D-printing.
Y1  - 2016
U6  - https://doi.org/10.1039/C5LC01195G
SN  - 1473-0189
VL  - 16
IS  - 1
SP  - 70
EP  - 74
PB  - Royal Society of Chemistry
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Hoeveler, Bastian
A1  - Janser, Frank
A1  - Bindewald, Thorsten
A1  - Gebhardt, Andreas
T1  - Entwurf, Fertigung und Untersuchung eines Windkanalmodells eines innovativen, senkrechtstartenden Kleinflugzeuges
JF  - RTejournal - Forum für Rapid Technologie
Y1  - 2015
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:0009-2-42921
SN  - 1614-0923
IS  - 12
SP  - 1
EP  - 5
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - JOUR
A1  - Kuperjans, Isabel
A1  - Weitzel, J.
T1  - Energiedesign 2020 : Sichere Strom- und Wärmeversorgung für die Industrie
JF  - TAB: das Fachmedium der TGA-Branche
Y1  - 2015
SN  - 0341-2032
IS  - 3
SP  - 105
EP  - 107
PB  - Bauverlag
CY  - Gütersloh
ER  - 
TY  - JOUR
A1  - Murib, M. S.
A1  - Yeap, W. S.
A1  - Eurlings, Y.
A1  - Grinsven, B. van
A1  - Boyen, H.-G.
A1  - Conings, B.
A1  - Michiels, L.
A1  - Ameloot, Marcel
A1  - Carleer, R.
A1  - Warmer, J.
A1  - Kaul, P.
A1  - Haenen, K.
A1  - Schöning, Michael Josef
A1  - Ceuninck, W. de
A1  - Wagner, P.
T1  - Heat-transfer based characterization of DNA on synthetic sapphire chips
JF  - Sensors and Actuators B: Chemical
N2  - In this study, we show that synthetic sapphire (Al₂O₃), an established implant material, can also serve as a platform material for biosensors comparable to nanocrystalline diamond. Sapphire chips, beads, and powder were first modified with (3-aminopropyl) triethoxysilane (APTES), followed by succinic anhydride (SA), and finally single-stranded probe DNA was EDC coupled to the functionalized layer. The presence of the APTES-SA layer on sapphire powders was confirmed by thermogravimetric analyis and Fourier-transform infrared spectroscopy. Using planar sapphire chips as substrates and X-ray photoelectron spectroscopy (XPS) as surface-sensitive tool, the sequence of individual layers was analyzed with respect to their chemical state, enabling the quantification of areal densities of the involved molecular units. Fluorescence microscopy was used to demonstrate the hybridization of fluorescently tagged target DNA to the probe DNA, including denaturation- and re-hybridization experiments. Due to its high thermal conductivity, synthetic sapphire is especially suitable as a chip material for the heat-transfer method, which was employed to distinguish complementary- and non-complementary DNA duplexes containing single-nucleotide polymorphisms. These results indicate that it is possible to detect mutations electronically with a chemically resilient and electrically insulating chip material.
Y1  - 2016
U6  - https://doi.org/10.1016/j.snb.2016.02.027
SN  - 0925-4005
VL  - 230
IS  - 230
SP  - 260
EP  - 271
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Strategies in developing thin-film sensors for monitoring aseptic food processes : Theoretical considerations and investigations of passivation materials
JF  - Electrochimica Acta
N2  - The sterilization of packages in aseptic food processes is highly significant to maintain a consumer-safe product with extended shelf-life. Today, the sterilization of food packages is predominantly accomplished by gaseous hydrogen peroxide (H2O2) in combination with heat. In order to monitor this sterilization process, calorimetric gas sensors as differential set-up of two platinum temperature sensors representing a catalytically active (additionally deposition of MnO2) and a passive segment have been recently developed. The temperature rise of the exothermic decomposition serves as an indicator of the present H2O2 concentration. In the present work, a theoretical approach considering the sensor’s thermochemistry and physical transport phenomena was formulated to evaluate the temperature rise based on the energy content of gaseous H2O2. In a further part of this work, three polymers have been analyzed with respect to their application as passivation materials. The examined polymers are photoresist SU-8, perfluoroalkoxy (PFA) and fluorinated ethylene propylene (FEP). Thermal analyses by means of differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) have been conducted to determine the operation limits of the polymers. The overall chemical resistance and stability of the polymers against the harsh environmental conditions during the sterilization process have been examined by attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR).
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.06.126
SN  - 0013-4686
VL  - 183
SP  - 130
EP  - 136
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamato, Ko-ichiro
A1  - Sakakita, Sakura
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
A1  - Yoshinobu, Tatsuo
T1  - Application of chemical imaging sensor to in-situ pH imaging in the vicinity of a corroding metal surface
JF  - Electrochimica Acta
N2  - The chemical imaging sensor was applied to in-situ pH imaging of the solution in the vicinity of a corroding surface of stainless steel under potentiostatic polarization. A test piece of polished stainless steel was placed on the sensing surface leaving a narrow gap filled with artificial seawater and the stainless steel was corroded under polarization. The pH images obtained during polarization showed correspondence between the region of lower pH and the site of corrosion. It was also found that the pH value in the gap became as low as 2 by polarization, which triggered corrosion.
Y1  - 2015
U6  - https://doi.org/10.1016/j.electacta.2015.07.184
SN  - 0013-4686
VL  - 183
SP  - 137
EP  - 142
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, Maximillian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Monitoring of the Enzymatically Catalyzed Degradation of Biodegradable Polymers by Means of Capacitive Field-Effect Sensors
JF  - Analytical Chemistry
N2  - Designing novel or optimizing existing biodegradable polymers for biomedical applications requires numerous tests on the effect of substances on the degradation process. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) sensors have been applied for monitoring an enzymatically catalyzed degradation of polymers for the first time. The thin films of biodegradable polymer poly(d,l-lactic acid) and enzyme lipase were used as a model system. During degradation, the sensors were read-out by means of impedance spectroscopy. In order to interpret the data obtained from impedance measurements, an electrical equivalent circuit model was developed. In addition, morphological investigations of the polymer surface have been performed by means of in situ atomic force microscopy. The sensor signal change, which reflects the progress of degradation, indicates an accelerated degradation in the presence of the enzyme compared to hydrolysis in neutral pH buffer media. The degradation rate increases with increasing enzyme concentration. The obtained results demonstrate the potential of PMEIS sensors as a very promising tool for in situ and real-time monitoring of degradation of polymers.
Y1  - 2015
U6  - https://doi.org/10.1021/acs.analchem.5b00617
SN  - 1520-6882
VL  - 87
IS  - 13
SP  - 6607
EP  - 6613
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Grundmann, Jan Thimo
A1  - Dachwald, Bernd
A1  - Grimm, Christian D.
A1  - Kahle, Ralph
A1  - Koch, Aaron Dexter
A1  - Krause, Christian
A1  - Lange, Caroline
A1  - Quantius, Dominik
A1  - Ulamec, Stephan
T1  - Spacecraft for Hypervelocity Impact Research – An Overview of Capabilities, Constraints and the Challenges of Getting There
JF  - Procedia Engineering
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.04.021
SN  - 1877-7058
N1  - Proceedings of the 2015 Hypervelocity Impact Symposium (HVIS 2015)
VL  - Vol. 103
SP  - 151
EP  - 158
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kowalski, Julia
A1  - Linder, Peter
A1  - Zierke, S.
A1  - Wulfen, B. van
A1  - Clemens, J.
A1  - Konstantinidis, K.
A1  - Ameres, G.
A1  - Hoffmann, R.
A1  - Mikucki, J.
A1  - Tulaczyk, S.
A1  - Funke, O.
A1  - Blandfort, D.
A1  - Espe, Clemens
A1  - Feldmann, Marco
A1  - Francke, Gero
A1  - Hiecker, S.
A1  - Plescher, Engelbert
A1  - Schöngarth, Sarah
A1  - Dachwald, Bernd
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Eliseev, D.
A1  - Heinen, D.
A1  - Scholz, F.
A1  - Wiebusch, C.
A1  - Macht, S.
A1  - Bestmann, U.
A1  - Reineking, T.
A1  - Zetzsche, C.
A1  - Schill, K.
A1  - Förstner, R.
A1  - Niedermeier, H.
A1  - Szumski, A.
A1  - Eissfeller, B.
A1  - Naumann, U.
A1  - Helbing, K.
T1  - Navigation technology for exploration of glacier ice with maneuverable melting probes
JF  - Cold Regions Science and Technology
N2  - The Saturnian moon Enceladus with its extensive water bodies underneath a thick ice sheet cover is a potential candidate for extraterrestrial life. Direct exploration of such extraterrestrial aquatic ecosystems requires advanced access and sampling technologies with a high level of autonomy. A new technological approach has been developed as part of the collaborative research project Enceladus Explorer (EnEx). The concept is based upon a minimally invasive melting probe called the IceMole. The force-regulated, heater-controlled IceMole is able to travel along a curved trajectory as well as upwards. Hence, it allows maneuvers which may be necessary for obstacle avoidance or target selection. Maneuverability, however, necessitates a sophisticated on-board navigation system capable of autonomous operations. The development of such a navigational system has been the focal part of the EnEx project. The original IceMole has been further developed to include relative positioning based on in-ice attitude determination, acoustic positioning, ultrasonic obstacle and target detection integrated through a high-level sensor fusion. This paper describes the EnEx technology and discusses implications for an actual extraterrestrial mission concept.
Y1  - 2016
U6  - https://doi.org/10.1016/j.coldregions.2015.11.006
SN  - 0165-232X
IS  - 123
SP  - 53
EP  - 70
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Kubalski, Thomas
A1  - Butenweg, Christoph
T1  - Modelling strategies for horizontally loaded infill masonry
T1  - Modellierungsansätze für horizontal beanspruchtes Ausfachungsmauerwerk
JF  - Mauerwerk : European journal of masonry
Y1  - 2015
U6  - https://doi.org/10.1002/dama.201500675
VL  - Volume 19
IS  - Issue 5
SP  - 363
EP  - 369
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Renault, Philippe
T1  - Workshop der Gesellschaften zum EU-Projekt SHARE
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt
Y1  - 2014
SN  - 1436-4867 (E-Journal); 0005-6650 (Print)
VL  - 89 (2014)
IS  - Oktober
SP  - S2
EP  - S3
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Meyer, Udo
A1  - Butenweg, Christoph
A1  - Fehling, Ekkehard
T1  - EU-Projekt INSYSME : innovative Systeme für erdbebentaugliche Ausfachungswände aus Ziegelmauerwerk
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt
Y1  - 2014
SN  - 1436-4867 (E-Journal); 0005-6650 (Print)
VL  - 89 (2014)
IS  - April
SP  - S14
EP  - S15
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Schmitt, Timo
A1  - Rosen, Britta
T1  - Seismische Einwirkungen auf erdverlegte Rohrleitungssysteme
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik
Y1  - 2014
SN  - 0005-6650
VL  - 89 (2014)
IS  - Heft 7/8
SP  - 316
EP  - 324
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Meyer, Udo
A1  - Fehling, Ekkehard
T1  - EU-Projekt INSYSME: Innovative Techniken für erdbebensichere Ausfachungswände aus Ziegelmauerwerk in Stahlbetonrahmentragwerken
JF  - Mauerwerk : European journal of masonry
N2  - Am 1. Oktober 2013 ist das auf drei Jahre angelegte EU-Forschungsprojekt INSYSME – Innovative Systeme für erdbebentaugliche Ausfachungswände aus Ziegelmauerwerk in Stahlbetonrahmentragwerken – gestartet. Unter der Koordination der Universität Padua beteiligen sich 16 Partner aus sechs europäischen Ländern (Deutschland, Griechenland, Italien, Portugal, Rumänien, Türkei). Als deutsche Partner nehmen die Arbeitsgemeinschaft Mauerziegel aus Bonn, die Universität Kassel sowie das Ingenieurbüro SDA-engineering GmbH aus Herzogenrath, teil. Ziel der deutschen Partner ist die Entwicklung von innovativen Ausfachungssystemen aus monolithischem wärmedämmenden Ziegelmauerwerk, mit denen nicht nur eine erhöhte Erdbebensicherheit, sondern auch die sichere Erfüllung der steigenden Anforderungen aus Windbeanspruchungen gewährleistet werden können. Die Forschungsergebnisse sollen vom Partner SDA-engineering GmbH in die bereits seit einigen Jahren verfügbare Softwarelösung MINEA [1] integriert werden. Weitere Informationen stehen auf den Websites des Projektes [2] zur Verfügung. Im vorliegenden Beitrag werden nach einer kurzen thematischen Einführung die Ergebnisse von Tastversuchen an senkrecht zur Ebene belasteten Ausfachungswänden aus Planziegelmauerwerk vorgestellt. Im Anschluss wird das geplante Arbeitsprogramm der deutschen Partner im Projekt INSYSME beschrieben.
Y1  - 2014
U6  - https://doi.org/10.1002/dama.201400612
SN  - 1437-1022 (E-Journal); 1432-3427 (Print)
VL  - 18
IS  - 2
SP  - 78
EP  - 81
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Gellert, Christoph
A1  - Butenweg, Christoph
T1  - Seismic analysis of masonry structures in German earthquake zones according to DIN EN 1998-1
T1  - Erdbebenbemessung von Mauerwerksbauten in deutschen Erdbebengebieten nach DIN EN 1998-1
JF  - Mauerwerk : European journal of masonry
N2  - Die Erdbeben in Albstadt 1978 (Magnitude 5,7), Roermond 1992 (Magnitude 5,9) oder in Waldkirch 2004 (Magnitude 5,1) haben verdeutlicht, dass die erdbebensichere Auslegung von Mauerwerksbauten auch in Deutschland von großer Bedeutung ist. Bereits im Jahr 1981 wurde die DIN 4149 (1981) “Bauten in deutschen Erdbebengebieten – Lastannahmen, Bemessung und Ausführung üblicher Hochbauten“ eingeführt, in der aber für Mauerwerksbauten nur wenige Anforderungen gestellt wurden. Diese Norm wurde durch den NABau-Arbeitsausschuss “Erdbeben; Sonderfragen“ des Deutschen Instituts für Normung e.V. (DIN) auf Grundlage des Eurocode 8 (2004) vollständig überarbeitet und durch die DIN 4149 (2005) abgelöst, die umfangreiche Regelungen für die seismische Auslegung von Mauerwerksbauten enthält. Mittlerweile liegen die DIN EN 1998-1 (2010) und der Nationale Anhang DIN EN 1998-1/NA (2011) vor, die nach Einarbeitung der Ergebnisse der durchgeführten Anwendungserprobung bauaufsichtlich eingeführt und die DIN 4149 (2005) ersetzen werden. Der folgende Beitrag gibt einen Überblick über die seismische Berechnung und Bemessung von Mauerwerksbauten nach dem europäischen Regelwerk und illustriert deren Anwendung an einem baupraktischen Beispiel.
Y1  - 2014
U6  - https://doi.org/10.1002/dama.201400626
SN  - 1437-1022 (E-Journal); 1432-3427 (Print)
VL  - 18
IS  - 3-4
SP  - 188
EP  - 196
PB  - Ernst & Sohn
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Taddei, Francesca
A1  - Butenweg, Christoph
A1  - Klinkel, S.
T1  - Parametric investigation of the soil-structure interaction effects on the dynamic behaviour of a shallow foundation supported wind turbine considering a layered soil
JF  - Wind energy : an international journal for progress and applications in wind power conversion technology
Y1  - 2015
U6  - https://doi.org/10.1002/we.1703
SN  - 1099-1824 (E-Journal); 1095-4244 (Print)
VL  - Volume 18
IS  - Issue 3
SP  - 399
EP  - 417
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Altay, Okyay
A1  - Butenweg, Christoph
A1  - Taddei, Francesca
T1  - Effektivität von Schwingungsdämpfern bei Windenergieanlagen
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt
Y1  - 2013
SN  - 1436-4867 (E-Journal); 0005-6650 (Print)
N1  - Printausgabe in der Bibliothek Bayernallee vorhanden: 13 Z 049-2013
VL  - Band 88
IS  - Heft 10
SP  - S11
EP  - S17
PB  - VDI Fachmedien
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Gellert, Christoph
T1  - Nichtlinearer Nachweis von Mauerwerksbauten
JF  - Mauerwerk : European journal of masonry
Y1  - 2013
U6  - https://doi.org/10.1002/dama.201300575
SN  - 1437-1022 (E-Journal); 1432-3427 (Print)
VL  - Volume 17
IS  - Issue 3
SP  - 166
EP  - 171
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Ikier, Axel
T1  - Impact-Belastungen von Stahlbetonkonstruktionen
JF  - Bauingenieur : die richtungsweisende Zeitschrift im Bauingenieurswesen ; offizielle Zeitschrift der VDI-Gesellschaft Bautechnik. Beilage: D-A-CH-Mitteilungsblatt
Y1  - 2013
SN  - 0005-6650
N1  - Printausgabe in der Bibliothek Bayernallee vorhanden: 13 Z 049-2013
VL  - Band 88
SP  - S7
EP  - S14
PB  - VDI Verlag
CY  - Düsseldorf
ER  -