TY  - JOUR
A1  - Jung, Alexander
A1  - Müller, Wolfram
A1  - Staat, Manfred
T1  - Wind and fairness in ski jumping: A computer modelling analysis
JF  - Journal of Biomechanics
N2  - Wind is closely associated with the discussion of fairness in ski jumping. To counter-act its influence on the jump length, the International Ski Federation (FIS) has introduced a wind compensation approach. We applied three differently accurate computer models of the flight phase with wind (M1, M2, and M3) to study the jump length effects of various wind scenarios. The previously used model M1 is accurate for wind blowing in direction of the flight path, but inaccuracies are to be expected for wind directions deviating from the tangent to the flight path. M2 considers the change of airflow direction, but it does not consider the associated change in the angle of attack of the skis which additionally modifies drag and lift area time functions. M3 predicts the length effect for all wind directions within the plane of the flight trajectory without any mathematical simplification. Prediction errors of M3 are determined only by the quality of the input data: wind velocity, drag and lift area functions, take-off velocity, and weight. For comparing the three models, drag and lift area functions of an optimized reference jump were used. Results obtained with M2, which is much easier to handle than M3, did not deviate noticeably when compared to predictions of the reference model M3. Therefore, we suggest to use M2 in future applications. A comparison of M2 predictions with the FIS wind compensation system showed substantial discrepancies, for instance: in the first flight phase, tailwind can increase jump length, and headwind can decrease it; this is opposite of what had been anticipated before and is not considered in the current wind compensation system in ski jumping.
Y1  - 2018
U6  - https://doi.org/10.1016/j.jbiomech.2018.05.001
SN  - 0021-9290
IS  - 75
SP  - 147
EP  - 153
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Jockwer, R.
A1  - Kleiber, M.
A1  - Uibel, Thomas
ED  - Görlacher, Rainer
T1  - Criteria for Evaluating the Simplification of Design Rules for Dowel-type Fasteners
T2  - International Network on Timber Engineering Research, INTER : proceedings, meeting 51, 10 - 13 August 2016, Tallinn, Estonia
Y1  - 2018
SP  - 461
EP  - 466
PB  - Timber Scientific Publishing, KIT Holzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - JOUR
A1  - Jochim, Haldor E.
A1  - Menzel, Christoph J.
T1  - Die Trassenbündelung als Planungsmethode nachhaltiger Verkehrspolitik
JF  - Der Eisenbahningenieur : EI
Y1  - 2018
SN  - 0013-2810
VL  - 69
IS  - 11
SP  - 26
EP  - 31
PB  - DVV Media Group
CY  - Hamburg
ER  - 
TY  - BOOK
A1  - Jochim, Haldor E.
A1  - Lademann, Frank
T1  - Planung von Bahnanlagen: Grundlagen - Planung - Berechnung
Y1  - 2018
SN  - 978-3-446-44220-7
U6  - https://doi.org/10.3139/9783446448940
PB  - Fachbuchverlag Leipzig im Carl Hanser Verlag
CY  - München
ET  - 2., aktualisierte und erweiterte Auflage
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Wagner, Patrick H.
A1  - Schöning, Michael Josef
T1  - Thermocatalytic Behavior of Manganese (IV) Oxide as Nanoporous Material on the Dissociation of a Gas Mixture Containing Hydrogen Peroxide
JF  - Nanomaterials
N2  - In this article, we present an overview on the thermocatalytic reaction of hydrogen peroxide (H₂O₂) gas on a manganese (IV) oxide (MnO₂) catalytic structure. The principle of operation and manufacturing techniques are introduced for a calorimetric H₂O₂ gas sensor based on porous MnO₂. Results from surface analyses by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) of the catalytic material provide indication of the H₂O₂ dissociation reaction schemes. The correlation between theory and the experiments is documented in numerical models of the catalytic reaction. The aim of the numerical models is to provide further information on the reaction kinetics and performance enhancement of the porous MnO₂ catalyst.
Y1  - 2018
U6  - https://doi.org/10.3390/nano8040262
SN  - 2079-4991
VL  - 8
IS  - 4
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, Michael
A1  - Wagner, Patrick H.
A1  - Schöning, Michael Josef
T1  - Experimental and Numerical Analyzes of a Sensor Based on Interdigitated Electrodes for Studying Microbiological Alterations
JF  - physica status solidi (a): applications and materials science
N2  - In this work, a cell-based biosensor to evaluate the sterilization efficacy of hydrogen peroxide vapor sterilization processes is characterized. The transducer of the biosensor is based on interdigitated gold electrodes fabricated on an inert glass substrate. Impedance spectroscopy is applied to evaluate the sensor behavior and the alteration of test microorganisms due to the sterilization process. These alterations are related to changes in relative permittivity and electrical conductivity of the bacterial spores. Sensor measurements are conducted with and without bacterial spores (Bacillus atrophaeus), as well as after an industrial sterilization protocol. Equivalent two-dimensional numerical models based on finite element method of the periodic finger structures of the interdigitated gold electrodes are designed and validated using COMSOL® Multiphysics software by the application of known dielectric properties. The validated models are used to compute the electrical properties at different sensor states (blank, loaded with spores, and after sterilization). As a final result, we will derive and tabulate the frequency-dependent electrical parameters of the spore layer using a novel model that combines experimental data with numerical optimization techniques.
Y1  - 2018
U6  - https://doi.org/10.1002/pssa.201700920
SN  - 1862-6319
VL  - 215
IS  - 15
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Jenert, Tobias
A1  - Barnat, Miriam
A1  - Dilger, Bernadette
T1  - Struktur, Prozess oder Didaktik als Ausgangspunkt? - Ein integratives Modell der Curriculumentwicklung an Hochschule
T2  - Gelingende Lehre: erkennen, entwickeln, etablieren : Beiträge der Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik (dghd) 2016
Y1  - 2018
SN  - 9783763959419
N1  - Blickpunkt Hochschuldidaktik, Vol. 132
SP  - 149
EP  - 164
PB  - wbv Media
CY  - Bielefeld
ER  - 
TY  - CHAP
A1  - Jean-Pierre P., de Vera
A1  - Baque, Mickael
A1  - Billi, Daniela
A1  - Böttger, Ute
A1  - Bulat, Sergey
A1  - Czupalla, Markus
A1  - Dachwald, Bernd
A1  - de la Torre, Rosa
A1  - Elsaesser, Andreas
A1  - Foucher, Frédéric
A1  - Korsitzky, Hartmut
A1  - Kozyrovska, Natalia
A1  - Läufer, Andreas
A1  - Moeller, Ralf
A1  - Olsson-Francis, Karen
A1  - Onofri, Silvano
A1  - Sommer, Stefan
A1  - Wagner, Dirk
A1  - Westall, Frances
T1  - The search for life on Mars and in the Solar System - strategies, logistics and infrastructures
T2  - 69th International Astronautical Congress (IAC)
N2  - The question "Are we alone in the Universe?" is perhaps the most fundamental one that affects mankind. How can we address the search for life in our Solar System? Mars, Enceladus and Europa are the focus of the search for life outside the terrestrial biosphere. While it is more likely to find remnants of life (fossils of extinct life) on Mars because of its past short time window of the surface habitability, it is probably more likely to find traces of extant life on the icy moons and ocean worlds of Jupiter and Saturn. Nevertheless, even on Mars there could still be a chance to find extant life in niches near to the surface or in just discovered subglacial lakes beneath the South Pole ice cap. Here, the different approaches for the detection of traces of life in the form of biosignatures including pre-biotic molecules will be presented. We will outline the required infrastructure for this enterprise and give examples of future mission concepts to investigate the presence of life on other planets and moons. Finally, we will provide suggestions on methods, techniques, operations and strategies for preparation and realization of future life detection missions.
KW  - life detection
KW  - Mars
KW  - icy moons
KW  - habitability
KW  - space missions
Y1  - 2018
N1  - 69th International Astronautical Congress (IAC), Bremen, Germany, 1-5 October 2018.
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Hüning, Felix
A1  - Heuermann, Holger
A1  - Wache, Franz-Josef
A1  - Jajo, Rami Audisho
T1  - A new wireless sensor interface using dual-mode radio
JF  - Journal of Sensors and Sensor Systems : JSSS
N2  - The integration of sensors is one of the major tasks in embedded, control and “internet of things” (IoT) applications. For the integration mainly digital interfaces are used, starting from rather simple pulse-width modulation (PWM) interface to more complex interfaces like CAN (Controller Area Network). Even though these interfaces are tethered by definition, a wireless realization is highly welcome in many applications to reduce cable and connector cost, increase the flexibility and realize new emerging applications like wireless control systems. Currently used wireless solutions like Bluetooth, WirelessHART or IO-Link Wireless use dedicated communication standards and corresponding higher protocol layers to realize the wireless communication. Due to the complexity of the communication and the protocol handling, additional latency and jitter are introduced to the data communication that can meet the requirements for many applications. Even though tunnelling of other bus data like CAN data is generally also possible the latency and jitter prevent the tunnelling from being transparent for the bus system. Therefore a new basic technology based on dual-mode radio is used to realize a wireless communication on the physical layer only, enabling a reliable and real-time data transfer. As this system operates on the physical layer it is independent of any higher layers of the OSI (open systems interconnection) model. Hence it can be used for several different communication systems to replace the tethered physical layer. A prototype is developed and tested for real-time wireless PWM, SENT (single-edge nibble transmission) and CAN data transfer with very low latency and jitter.
Y1  - 2018
U6  - https://doi.org/10.5194/jsss-7-507-2018
VL  - Volume 7
IS  - 2
SP  - 507
EP  - 515
PB  - Copernicus Publ.
CY  - Göttingen
ER  - 
TY  - JOUR
A1  - Hüning, Felix
A1  - Heuermann, Holger
A1  - Wache, Franz-Josef
T1  - Wireless CAN
JF  - Etz: Elektrotechnik & Automation
N2  - In modernen elektronischen und mechatronischen Systemen, z. B. im industriellen oder automobil Bereich, kommunizieren eingebettete Steuergeräte und Sensoren vielfach über Bussysteme wie CAN oder LIN. Die Kommunikation findet in der Regel drahtgebunden statt, so dass der Kabelbaum für die Kommunikation sehr groß werden kann. Daher ist es naheliegend, Leitungen und dazugehörige Stecker, z. B. für nicht-sicherheitskritische Komfortsysteme, einzusparen und diese durch gerichtete Funkstrecken für kurze Entfernungen zu ersetzen. Somit könnten Komponenten wie ECUs oder Sensoren kabel- und steckerlos in ein Bussystem integriert werden. Zudem ist eine einfache galvanische und mechanische Trennung zu erreichen. Funkübertragung wird bei diesen Bussystemen derzeit nicht eingesetzt, da insbesondere die Echtzeitfähigkeit und die Robustheit der vorhandenen Funksysteme nicht den Anforderungen der Anwendungen entspricht. Zudem sind bestehende Funksysteme wie WLAN oder Bluetooth im Vergleich zur konventionellen Verkabelung teuer und es besteht hierbei die Möglichkeit, dass sie ausspioniert werden können und so sensible Daten entwendet werden können. In dieser Arbeit wird eine alternative Realisierung zu den bestehenden Funksystemen vorgestellt, die aus wenigen Komponenten aufzubauen ist. Es ist eine protokolllose, echtzeitfähige Übertragung möglich und somit die transparente Integration in ein Bussystem wie CAN.
Y1  - 2018
SN  - 0170-1711
VL  - 139
IS  - 10
SP  - 22
EP  - 26
PB  - VDE-Verlag
CY  - Wuppertal
ER  -