TY  - JOUR
A1  - Mottaghy, Darius
A1  - Schellschmidt, R.
A1  - Popov, Y. A.
A1  - Clauser, C.
A1  - Kukkonen, I. T.
A1  - Nover, G.
A1  - Milanovsky, S.
A1  - Romushkevich, R. A.
T1  - New heat flow data from the immediate vicinity of the Kola super-deep borehole: Vertical variation in heat flow density confirmed and attributed to advection
JF  - Tectonophysics
Y1  - 2005
U6  - https://doi.org/10.1016/j.tecto.2005.03.005
SN  - 1879-3266
VL  - 401
IS  - 1-2
SP  - 119
EP  - 142
ER  - 
TY  - JOUR
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Scheja, S.
A1  - Wu, Chunsheng
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Electrostatic Detection of Unlabelled Single- and Double-stranded DNA Using Capacitive Field-effect Devices Functionalized with a Positively Charged Polyelectrolyte Layer
JF  - Procedia Engineering
N2  - Capacitive field-effect electrolyte-insulator-semiconductor sensors consisting of an Al-p-Si-SiO2 structure have been used for the electrical detection of unlabelled single- and double-stranded DNA (dsDNA) molecules by their intrinsic charge. A simple functionalization protocol based on the layer-by-layer (LbL) technique was used to prepare a weak polyelectrolyte/probe-DNA bilayer, followed by the hybridization with complementary target DNA molecules. Due to the flat orientation of the LbL-adsorbed DNA molecules, a high sensor signal has been achieved. In addition, direct label-free detection of in-solution hybridized dsDNA molecules has been studied.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.710
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 544
EP  - 547
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Miyamoto, Ko-ichiro
A1  - Bing, Yu
A1  - Wagner, Torsten
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Visualization of Defects on a Cultured Cell Layer by Utilizing Chemical Imaging Sensor
JF  - Procedia Engineering
N2  - The chemical imaging sensor is a field-effect sensor which is able to visualize both the distribution of ions (in LAPS mode) and the distribution of impedance (in SPIM mode) inthe sample. In this study, a novel wound-healing assay is proposed, in which the chemical imaging sensor operated in SPIM mode is applied to monitor the defect of a cell layer brought into proximity of the sensing surface.A reduced impedance inside the defect, which was artificially formed ina cell layer, was successfully visualized in a photocurrent image.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.806
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 936
EP  - 939
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Pilas, Johanna
A1  - Mariano, K.
A1  - Keusgen, M.
A1  - Selmer, Thorsten
A1  - Schöning, Michael Josef
T1  - Optimization of an Enzyme-based Multi-parameter Biosensor for Monitoring Biogas Processes
JF  - Procedia Engineering
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.702
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 532
EP  - 535
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, M.
A1  - Molin, D. G. M.
A1  - Akker, N. M. S. van den
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation
JF  - Procedia Engineering
N2  - A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.815
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 948
EP  - 951
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Siegert, Petra
A1  - Willenberg, H.
A1  - Poghossian, Arshak
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Substrate Recycling Amplification
JF  - Procedia Engineering
N2  - An amperometric enzyme biosensor has been applied for the detection of adrenaline. The adrenaline biosensor has been prepared by modification of an oxygen electrode with the enzyme laccase that operates at a broad pH range between pH 3.5 to pH 8. The enzyme molecules were immobilized via cross-linking with glutaraldehyde. The sensitivity of the developed adrenaline biosensor in different pH buffer solutions has been studied.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.708
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 540
EP  - 543
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Dantism, S.
A1  - Takenaga, S.
A1  - Wagner, P.
A1  - Wagner, Torsten
A1  - Schöning, Michael Josef
T1  - Light-addressable Potentiometric Sensor (LAPS) Combined with Multi-chamber Structures to Investigate the Metabolic Activity of Cells
JF  - Procedia Engineering
N2  - LAPS are field-effect-based potentiometric sensors which are able to monitor analyte concentrations in a spatially resolved manner. Hence, a LAPS sensor system is a powerful device to record chemical imaging of the concentration of chemical species in an aqueous solution, chemical reactions, or the growth of cell colonies on the sensor surface, to record chemical images. In this work, multi-chamber 3D-printed structures made out of polymer (PP-ABS) were combined with LAPS chips to analyse differentially and simultaneously the metabolic activity of Escherichia coli K12 and Chinese hamster ovary (CHO) cells, and the responds of those cells to the addition of glucose solution.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.647
SN  - 1877-7058
N1  - Part of special issue "Eurosensors 2015"
VL  - 120
SP  - 384
EP  - 387
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Voigt, Birgit
A1  - Albrecht, Dirk
A1  - Sievers, Susanne
A1  - Becher, Dörte
A1  - Bongaerts, Johannes
A1  - Evers, Stefan
A1  - Schweder, Thomas
A1  - Maurer, Karl-Heinz
A1  - Hecker, Michael
T1  - High-resolution proteome maps of Bacillus licheniformis cells growing in minimal medium
JF  - Proteomics
Y1  - 2015
U6  - https://doi.org/10.1002/pmic.201400504
SN  - 1615-9861
VL  - 15
IS  - 15
SP  - 2629
EP  - 2633
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schiffels, Johannes
A1  - Selmer, Thorsten
T1  - A flexible toolbox to study protein-assisted metalloenzyme assembly in vitro
JF  - Biotechnology and Bioengineering
Y1  - 2015
U6  - https://doi.org/10.1002/bit.25658
SN  - 1097-0290
VL  - 112
IS  - 11
SP  - 2360
EP  - 2372
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Bagheri, Mohsen
A1  - Schleupen, Josef
A1  - Dahmann, Peter
A1  - Kallweit, Stephan
T1  - A multi-functional device applying for the safe maintenance at high-altitude on wind turbines
T2  - 20th International Conference on Composite Materials : Copenhagen, 19 - 24th July 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Kallweit, Stephan
A1  - Gottschalk, Michael
A1  - Walenta, Robert
T1  - ROS based safety concept for collaborative robots in industrial applications
T2  - Advances in robot design and intelligent control : proceedings of the 24th International Conference on Robotics in Alpe-Adria-Danube Region (RAAD). (Advances in intelligent systems and computing ; 371)
N2  - The production and assembly of customized products increases the demand for flexible automation systems. One approach is to remove the safety fences that separate human and industrial robot to combine their skills. This collaboration possesses a certain risk for the human co-worker, leading to numerous safety concepts to protect him. The human needs to be monitored and tracked by a safety system using different sensors. The proposed system consists of a RGBD camera for surveillance of the common working area, an array of optical distance sensors to compensate shadowing effects of the RGBD camera and a laser range finder to detect the co-worker when approaching the work cell. The software for collision detection, path planning, robot control and predicting the behaviour of the co-worker is based on the Robot Operating System (ROS). A first prototype of the work cell shows that with advanced algorithms from the field of mobile robotics a very flexible safety concept can be realized: the robot not simply stops its movement when detecting a collision, but plans and executes an alternative path around the obstacle.
KW  - Collaborative robot
KW  - Human-Robot interaction
KW  - Safety concept
KW  - Workspace monitoring
KW  - Path planning
Y1  - 2016
SN  - 978-3-319-21289-0 (Print) ; 978-3-319-21290-6 (E-Book)
U6  - https://doi.org/10.1007/978-3-319-21290-6_3
SP  - 27
EP  - 35
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
T1  - Experimental and numerical investigation of the face stability of shallow tunnels in sand
T2  - Safe tunnelling for the city and environment : proceedings of the World Tunnel Congress 2009, Budapest, Hungary, 23 to 28 September 2009 / organised by International Tunnelling and Underground Space Association ...
Y1  - 2009
SP  - 1
EP  - 8
PB  - Hungarian Tunnelling Association
CY  - Budapest
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Blioumi, A.
A1  - Fellin, Wolfgang
A1  - Kolymbas, Dimitrios
T1  - Modelling anisotropic squeezing as a process in time
T2  - ECCOMAS Thematic Conference on Computational Methods in Tunneling ; August 27 - 29, 2007, Vienna, Austria : EURO:TUN 2007 : proceedings
Y1  - 2007
SN  - 3-9501554-7-3 ; 978-3-9501554-7-1
CY  - Wien
ER  - 
TY  - CHAP
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
T2  - Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...
Y1  - 2009
SN  - 978-0-415-47557-0
SP  - 112
EP  - 114
PB  - CRC Pr.
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Marcher, Thomas
T1  - Numerical prediction of time-dependent rock swelling based on an example of a major tunnel project in Ontario/Canada
T2  - Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...
Y1  - 2010
SN  - 978-0-415-59239-0
SP  - 297
EP  - 302
PB  - Taylor and Francis
CY  - London
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
T1  - Numerical investigation of the face stability of shallow tunnels in sand
T2  - Numerical methods in geotechnical engineering : (NUMGE 2010) : proceedings of the seventh European Conference on Numerical Methods in Geotechnical Engineering, Trondheim, Norway, 2 - 4 June 2010 / ed. by Thomas Benz ...
Y1  - 2010
SN  - 978-0-415-59239-0
SP  - 779
EP  - 784
PB  - Taylor and Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Kolymbas, Dimitrios
A1  - Fellin, W.
A1  - Kirsch, Ansgar
T1  - Squeezing due to stress relaxation in foliated rock
JF  - International journal for numerical and analytical methods in geomechanics
Y1  - 2006
U6  - https://doi.org/10.1002/nag.530
SN  - 1096-9853 (E-Journal); 0363-9061 (Print)
VL  - Vol. 30
IS  - Iss. 13
SP  - 1357
EP  - 1367
ER  - 
TY  - CHAP
A1  - Kirsch, Ansgar
A1  - Felber, W.
A1  - Marcher, Thomas
A1  - Fuchs, W.
T1  - Geotechnical challenges during design and construction of a ski resort in Azerbaijan
T2  - Geotechnics of roads and railways : proceedings of the 15th Danube - European Conference on Geotechnical Engineering : 9-11 September 2014, Vienna, Austria
Y1  - 2014
SN  - 978‐3‐902593‐01‐6
SP  - 757
EP  - 762
PB  - ÖIAV - Österreichischer Ingenieur- und Architekten-Verein
CY  - Wien
ER  - 
TY  - JOUR
A1  - Kirsch, Ansgar
T1  - Experimental investigation of the face stability of shallow tunnels in sand
JF  - Acta Geotechnica
N2  - Various models have been proposed for the prediction of the necessary support pressure at the face of a shallow tunnel. To assess their quality, the collapse of a tunnel face was modelled with small-scale model tests at single gravity. The development of the failure mechanism and the support force at the face in dry sand were investigated. The observed displacement patterns show a negligible influence of overburden on the extent and evolution of the failure zone. The latter is significantly influenced, though, by the initial density of the sand: in dense sand a chimney-wedge-type collapse mechanism developed, which propagated towards the soil surface. Initially, loose sand did not show any discrete collapse mechanism. The necessary support force was neither influenced by the overburden nor the initial density. A comparison with quantitative predictions by several theoretical models showed that the measured necessary support pressure is overestimated by most of the models. Those by Vermeer/Ruse and Léca/Dormieux showed the best agreement to the measurements.
Y1  - 2010
U6  - https://doi.org/10.1007/s11440-010-0110-7
SN  - 1861-1125
VL  - 5
IS  - 1
SP  - 43
EP  - 62
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
JF  - Structural safety
N2  - This paper proposes an approach to the choice and evaluation of engineering models with the aid of a typical application in geotechnics. An important issue in the construction of shallow tunnels, especially in weak ground conditions, is the tunnel face stability. Various theoretical and numerical models for predicting the necessary support pressure have been put forth in the literature. In this paper, we combine laboratory experiments performed at the University of Innsbruck with current methods of uncertainty and sensitivity analysis for assessing adequacy, predictive power and robustness of the models. The major issues are the handling of the twofold uncertainty of test results and of model predictions as well as the decision about what are the influential input parameters.
Y1  - 2010
U6  - https://doi.org/10.1016/j.strusafe.2010.06.001
SN  - 0167-4730
VL  - 32
IS  - 6
SP  - 402
EP  - 410
PB  - Elsevier
CY  - Amsterdam
ER  -