TY  - CHAP
A1  - Elsen, Ingo
T1  - A pixel based approach to view based object recognition with self-organizing neural networks
T2  - IECON'98. Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society
N2  - This paper addresses the pixel based classification of three dimensional objects from arbitrary views. To perform this task a coding strategy, inspired by the biological model of human vision, for pixel data is described. The coding strategy ensures that the input data is invariant against shift, scale and rotation of the object in the input domain. The image data is used as input to a class of self organizing neural networks, the Kohonen-maps or self-organizing feature maps (SOFM). To verify this approach two test sets have been generated: the first set, consisting of artificially generated images, is used to examine the classification properties of the SOFMs; the second test set examines the clustering capabilities of the SOFM when real world image data is applied to the network after it has been preprocessed to be invariant against shift, scale and rotation. It is shown that the clustering capability of the SOFM is strongly dependant on the invariance coding of the images.
Y1  - 1998
SN  - 0-7803-4503-7
U6  - https://doi.org/10.1109/IECON.1998.724032
N1  - Aachen, 31 August 1998 - 04 September 1998
SP  - 2040
EP  - 2044
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
A1  - Hawari, Asma
A1  - Johnen, Uwe
ED  - Pietsch, Wolfram
ED  - Krams, Benedikt
T1  - Produktkernel in der Systemintegration (Erfahrungsbericht aus der Praxis)
T2  - Vom Projekt zum Produkt - Fachtagung des GI-Fachausschusses Management der Anwendungsentwicklung und -wartung im Fachbereich Wirtschaftsinformatik (WI-MAW), 1. - 3. Dezember 2010 in Aachen
N2  - In der Vergangenheit basierten große Systemintegrationsprojekte in der Regel auf Individualentwicklungen für einzelne Kunden. Getrieben durch Kostendruck steigt aber der Bedarf nach standardisierten Lösungen, die gleichzeitig die individuellen Anforderungen des jeweiligen Umfelds berücksichtigen. T-Systems GEI GmbH wird beiden Anforderungen mit Produktkerneln gerecht. Neben den technischen Aspekten der Kernelentwicklung spielen besonders organisatorische Aspekte eine Rolle, um Kernel effizient und qualitativ hochwertig zu entwickeln, ohne deren Funktionalitäten ins Uferlose wachsen zu lassen. Umgesetzt hat T-Systems dieses Konzept für Flughafeninformationssysteme. Damit kann dem wachsenden Bedarf der Flughafenbetreiber nach einer effizienten und kostengünstigen Softwarelösung zur Unterstützung Ihrer Geschäftsprozesse entsprochen werden.
Y1  - 2010
SN  - 9783885792727
SN  - 1617-5468
SP  - 93
EP  - 102
PB  - Gesellschaft für Informatik eV
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
A1  - Kraiss, Karl-Friedrich
A1  - Krumbiegel, Dirk
T1  - Pixel based 3D object recognition with bidirectional associative memories
T2  - International Conference on Neural Networks 1997
N2  - This paper addresses the pixel based recognition of 3D objects with bidirectional associative memories. Computational power and memory requirements for this approach are identified and compared to the performance of current computer architectures by benchmarking different processors. It is shown, that the performance of special purpose hardware, like neurocomputers, is between one and two orders of magnitude higher than the performance of mainstream hardware. On the other hand, the calculation of small neural networks is performed more efficiently on mainstream processors. Based on these results a novel concept is developed, which is tailored for the efficient calculation of bidirectional associative memories. The computational efficiency is further enhanced by the application of algorithms and storage techniques which are matched to characteristics of the application at hand.
Y1  - 1997
SN  - 0-7803-4122-8
N1  - June 9 - 12, 1997, Westin Galleria Hotel Houston, Texas, USA.
SP  - 1679
EP  - 1684
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Elsen, Ingo
A1  - Schmalzbauer, Michael
ED  - Reussner, Ralf
ED  - Grund, Matthias
ED  - Oberweis, Andreas
ED  - Tichy, Walter
T1  - Messsystematik zur Steuerung der Produkt- und Prozessqualität in Systemintegrationsprojekten – ein Erfahrungsbericht
T2  - Software Engineering 2011 - Fachtagung des GI-Fachbereichs Softwaretechnik, 21. - 25. Februar 2011 in Karlsruhe
N2  - Der Erfolg eines Softwarenentwicklungsprojektes insbesondere eines Systemintegrationsprojektes wird mit der Erfüllung des „Teufelsdreiecks“, „In-Time“, „In-Budget“, „In-Quality“ gemessen. Hierzu ist die Kenntnis der Software- und Prozessqualität essenziell, um die Einhaltung der Qualitätskriterien festzustellen, aber auch, um eine Vorhersage hinsichtlich Termin- und Budgettreue zu treffen. Zu diesem Zweck wurde in der T-Systems Systems Integration ein System aus verschiedenen Key Performance Indikatoren entworfen und in der Organisation implementiert, das genau das leistet und die Kriterien für CMMI Level 3 erfüllt.
Y1  - 2011
SN  - 9783885792772
SN  - 1617-5468
PB  - Gesellschaft für Informatik eV
CY  - Bonn
ER  - 
TY  - CHAP
A1  - Eltester, Niklas Sebastian
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A smart factory setup based on the RoboCup logistics league
T2  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)
N2  - In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.
Y1  - 2020
U6  - https://doi.org/10.1109/ICPS48405.2020.9274766
N1  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS), 10-12 June 2020, Tampere, Finland.
SP  - 297
EP  - 302
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Endress, Tim
A1  - Bragard, Michael
T1  - Recording of efficiency-maps of low-power electric drive systems using a flexible matlab-based test bench
T2  - 2017 IEEE 58th International Scientific Conference on Power and Electrical Engineering of Riga Technical University (RTUCON)
N2  - This paper introduces a hardware setup to measure efficiency maps of low-power electric motors and their associated inverters. Here, the power of the device under test (DUT) ranges from some Watts to a few hundred Watts. The torque and speed of the DUT are measured independent of voltage and current in multiple load points. A Matlab-based software approach in combination with an open Texas-Instruments (TI) hardware setup ensures flexibility. Exemplarily, the efficiency field of a Permanent Magnet Synchronous Machine (PMSM) is measured to proof the concept. Brushless-DC (BLDC) motors can be tested as well. The nomenclature in this paper is based on the new European standard DIN EN 50598. Special attention is paid to the calculation of the measurement error.
Y1  - 2017
SN  - 978-1-5386-3846-0
U6  - https://doi.org/10.1109/RTUCON.2017.8124775
PB  - IEEE
CY  - New York
ER  - 
TY  - CHAP
A1  - Engel, M.
A1  - Thieringer, J.
A1  - Tippkötter, Nils
T1  - Microbial electrosynthesis for sustainable biobutanol production
T2  - New frontiers of biotech-processes (Himmelfahrtstagung) : 02-04 May 2016, Rhein-Mosel-Halle, Koblenz/Germany
Y1  - 2016
SP  - 77
EP  - 78
PB  - DECHEMA
CY  - Frankfurt am Main
ER  - 
TY  - CHAP
A1  - Engel, Mareike
A1  - Thieringer, Julia
A1  - Tippkötter, Nils
T1  - Linking bioprocess engineering and electrochemistry for sustainable biofuel production
T2  - Young Researchers Symposium, YRS 2016. Proceedings
N2  - Electromicrobial engineering is an emerging, highly interdisciplinary research area linking bioprocesses with electrochemistry. In this work, microbial electrosynthesis (MES) of biobutanol is carried out during acetone-butanol-ethanol (ABE) fermentations with Clostridium acetobutylicum. A constant electric potential of −600mV (vs. Ag/AgCl) with simultaneous addition of the soluble redox mediator neutral red is used in order to study the electron transfer between the working electrode and the bacterial cells. The results show an earlier initiation of solvent production for all fermentations with applied potential compared to the conventional ABE fermentation. The f inal butanol concentration can be more than doubled by the application of a negative potential combined with addition of neutral red. Moreover a higher biofilm formation on the working electrode compared to control cultivations has been observed. In contrast to previous studies, our results also indicate that direct electron transfer (DET) might be possible with C. acetobutylicum. The presented results make microbial butanol production economically attractive and therefore support the development of sustainable production processes in the chemical industry aspired by the “Centre for resource-efficient chemistry and raw material change” as well as the the project “NanoKat” working on nanostructured catalysts in Kaiserslautern.
Y1  - 2016
N1  - Young Researchers Symposium, YRS 2016, 14th - 15th April 2016, Fraunhofer-Zentrum Kaiserslautern
SP  - 49
EP  - 53
PB  - Fraunhofer Verlag
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Engels, Elmar
T1  - Industrieantriebe mit sercos Schnittstelle über MATLAB steuern
T2  - Tagungsband AALE 2013 : das Forum für Fachleute der Automatisierungstechnik aus Hochschulen und Wirtschaft ; 10. Fachkonferenz, Stralsund
Y1  - 2013
SN  - 978-3-8356-3364-3
SP  - 223
EP  - 232
PB  - DIV Dt. Industrieverl.
CY  - München
ER  - 
TY  - CHAP
A1  - Engels, Elmar
T1  - A field bus library for MATLAB based on open core engineering
T2  - Proceedings to the 14th International Workshop on Research and Education in Mechatronics, REM 2013, Wien, 05.06.-06.06.2013.
Y1  - 2013
SN  - 978-3-90275-907-8
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Gabler, T.
T1  - Universelle Programmierschnittstelle für Motion-Logic Systeme
T2  - Tagungsband zur AALE-Tagung 2012 : 9. Fachkonferenz
Y1  - 2012
SN  - 978-3-8356-3305-6
N1  - AALE 2012
SP  - 37
EP  - 46
PB  - Oldenbourg Industrieverlag
CY  - München
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Gabler, Thomas
T1  - Universelle Programmierschnittstelle für Motion-Logic Systeme : Struktur, Funktionen und Anwendung in der Forschung und Lehre
N2  - Mit freundlicher Genehmigung der Autoren und des Oldenbourg Industrieverlags https://www.oldenbourg-industrieverlag.de/de/9783835633223-33223 erschienen als Beitrag im Tagungsband zur AALE-Tagung 2012. 9. Fachkonferenz 4.-5. Mai 2012, Aachen, Fachhochschule. ISBN 9783835633223 S 2-1 S. 37-46 Original-Abstract der Autoren: "Dieser Artikel beschreibt eine universelle Programmierschnittstelle zur Entwicklung von Motion-Logic Applikationen für industrielle Motion-Controller. Sie ermöglicht die Entwicklung von Software mit modernen Hochsprachen, wie C/C++. Visual Basic, C#, Java, Objective-Cund visuellen Programmiersprachen, wie LabVIEW in Koexistenz mit klassischen Programmiersprachen für speicherprogrammierbare Steuerungen nach IEC 61131-3. Daraus ergeben sich neue Möglichkeiten industrielle Antriebs- und Steuerungssysteme mit ihrem IT-Umfeld zu verbinden."
KW  - Speicherprogrammierte Steuerung
KW  - Motion-Logic System
KW  - SPS
KW  - IndraMotion
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Luszczynski, Kai
T1  - Vergleichende Untersuchung zur Topologie von zelloptimalen, elektromobilitäts-optimierten Ladungsausgleichsvorrichtungen
N2  - Mit freundlicher Genehmigung der Autoren und des Oldenbourg Industrieverlags https://www.oldenbourg-industrieverlag.de/de/9783835633223-33223 erschienen als Beitrag im Tagungsband zur AALE-Tagung 2012. 9. Fachkonferenz 4.-5. Mai 2012, Aachen, Fachhochschule. ISBN 9783835633223 S 6-2. S. 165-174 Zusammenfassung der Autoren: "Abschließend kann festgehalten werden, dass die gesamten durchgeführten Überlegungen von den Messergebnissen der Inbetriebnahme positiv bestätigt werden. Es wird durch diese Topologie eine maximale Systemverfügbarkeit garantiert und die Zellen werden optimal betrieben. Ein Blick in die Zukunft für dieses Projekt zeigt viele Erweiterungs- und Optimierungsaufgaben. So muss der DC/DC-Wandler für einen bidirektionalen Betrieb erweitert werden, um einen Rekuperationsbetrieb zu gewährleisten bzw. die Zellen laden zu können. Dadurch können gleichzeitig die Gleichrichterdioden im Sekundärleistungsteil durch IGBTs oder MOSFETs ersetzt werden. Die voll funktionsfähige Version des DC/DC-Wandlers könnte höchstwahrscheinlich direkt auf die Anschlusspole der Zelle montiert werden, wodurch das Gewicht gesenkt wird. Durch die verringerte Verlustleistung in den Zuleitungen könnte der Wirkungsgrad noch einmal gesteigert werden.
KW  - Gleichspannungswandler
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Engels, Elmar
A1  - Schnabel, Holger
T1  - Rapid-control-prototyping of industrial drives for the sercos automation bus
T2  - 13th International Workshop on Mechatronics (MECATRONICS), 2012 9th France-Japan & 7th Europe-Asia Congress on and Research and Education in Mechatronics (REM)
N2  - This article describes the functionality of a MATLAB® library that can be used to develop motion-logic applications in MATLAB programming language for industrial drive and control systems using the well known sercos automation bus. Therewith MATLAB's functionality is extended to designing automation applications from single axis machines up to multi-kinematic robots.
KW  - MATLAB , MLPI , Motion control , Open Core , industrial drives , rapid control prototypin , sercos automation bus
Y1  - 2012
UR  - http://dx.doi.org/10.1109/MECATRONICS.2012.6451005
SN  - 978-1-4673-4771-6
SP  - 177
EP  - 181
ER  - 
TY  - CHAP
A1  - Engels, Ralf
T1  - MIKE URBAN FLOOD: Modellkopplung von Kanalnetzmodell und 2D Oberflächenmodell
N2  - Dipl.-Ing. Ralf Engels - DHI Wasser und Umwelt GmbH, Syke. 24 S. (S. 70-93) Beitrag zum 1. Aachener Softwaretag in der Wasserwirtschaft <1,2007, Aachen> Einleitung [des Autors] Die hydrodynamische Kanalnetzmodellierung ist ein Standardwerkzeug für die Bemessung von Kanalnetzen. Neben der Berechnung der hydrologischen und hydraulischen Gegebenheiten in einem städtischen Einzugsgebiet gehören auch weiterführende Technologien mittlerweile zum Standard. So können alle steuerbaren Elemente eines Kanalnetzes dynamisch so optimiert werden, dass die Leistungsfähigkeit des Kanalnetzes zusätzlich gesteigert werden kann. Automatische Werkzeuge zur dynamischen hydraulischen Schmutzfrachtberechnung ermöglichen die Erweiterung der Steuerung – insbesondere von Entlastungsanlagen – im Hinblick auf die entlasteten Schmutzfrachten und geben darüber hinaus detaillierte Informationen für den Betrieb der Kläranlage. Weiterführende biologische Prozessmodellierungen ergänzen dieses Themenfeld. GIS Werkzeuge können bei der räumlich differenzierten Modellierung von Kanalnetzen wertvolle Dienste leisten. Die detaillierte Betrachtung einzelner Haltungsflächen in ihrem räumlichen Zusammenhang ist damit ebenso möglich wie eine komplette Verwaltung aller für die Kanalnetzmodellierung notwendigen Daten in einem übersichtlichen grafischen Menü. Die Grenzen der Kanalnetzmodellierung lagen in früheren Zeiten an dessen Rand. Detaillierte Informationen über die Wege des Wassers auf der Geländeoberfläche, an der Schnittstelle zu Vorflutern und in der Interaktion mit Grundwasser waren bisher nicht modelltechnisch bewertbar. Eine dynamische Kopplung verschiedener Modelle zur Darstellung aller relevanten hydraulischen Prozesse ermöglicht eine integrative Betrachtung aller möglichen Wege, die das Wasser in der Stadt nehmen kann (Mark & Djordjevic, 2006). Dieser Beitrag präsentiert den Stand der Technik für die integrierte Modellierung städtischer Überschwemmungen mit Hilfe der Modellkopplung von Oberflächenmodellen und Kanalnetzmodellen.
KW  - Bemessung
KW  - Kanalisation
KW  - Kanalnetzmodellierung
KW  - Kanalnetz
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Badri, Sriram
A1  - Wenning, Marius
A1  - Kallweit, Stephan
T1  - Implementation of an Autonomous Tool Trolley in a Production Line
T2  - Advances in Service and Industrial Robotics. RAAD 2019. Advances in Intelligent Systems and Computing, vol 980
Y1  - 2019
SN  - 978-3-030-19648-6
U6  - https://doi.org/10.1007/978-3-030-19648-6_14
SP  - 117
EP  - 125
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Wiesen, Patrick
A1  - Kallweit, Stephan
A1  - Deshpande, Harshavardhan
A1  - Schleupen, Josef
T1  - Autonomous mobile manipulation using ROS
T2  - Advances in Service and Industrial Robotics
Y1  - 2018
SN  - 978-3-319-61276-8
U6  - https://doi.org/10.1007/978-3-319-61276-8_43
N1  - International Conference on Robotics in Alpe-Adria Danube Region RAAD 2017;
Mechanisms and Machince Science book series, Vol 49.
SP  - 389
EP  - 401
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Englhard, Markus
A1  - Weber, Tobias
A1  - Arent, Jan-Christoph
T1  - Efficiency enhancement for CFRP-Prepregautoclave manufacturing by means of simulation-assisted loading optimization
T2  - Proceedings of SAMPE Europe Conference 2021
N2  - A new method for improved autoclave loading within the restrictive framework of helicopter manufacturing is proposed. It is derived from experimental and numerical studies of the curing process and aims at optimizing tooling positions in the autoclave for fast and homogeneous heat-up. The mold positioning is based on two sets of information. The thermal properties of the molds, which can be determined via semi-empirical thermal simulation. The second information is a previously determined distribution of heat transfer coefficients inside the autoclave. Finally, an experimental proof of concept is performed to show a cycle time reduction of up to 31% using the proposed methodology.
Y1  - 2021
N1  - SAMPE Europe Conference 2021, Baden/Zürich, Schweiz, 29. bis 30. September 2021
ER  - 
TY  - CHAP
A1  - Enning, Manfred
A1  - Fratscher, René
T1  - Funk-Kommunikation für Güterwagen: Prinzipien und Anwendungsbeispiel
T2  - IRSA International Railway Symposium Aachen
Y1  - 2017
N1  - IRSA International Railway Symposium <2017, Aachen, Germany>
SP  - 1
EP  - 16
ER  - 
TY  - CHAP
A1  - Epple, U.
A1  - Brandes, Sinja
A1  - Gligorevic, Snjezana
A1  - Schnell, Michael
T1  - Receiver optimization for L-DACS1
T2  - IEEE/AIAA 28th Digital Avionics Systems Conference : 23-29 Oct. 2009 : Orlando, Fla.
Y1  - 2009
SN  - 978-1-4244-4078-8
SP  - 4B1-1
EP  - 4B1-12
ER  - 
TY  - CHAP
A1  - Ermelenko, Y.
A1  - Yoshinobu, T.
A1  - Mourzina, Y.
A1  - Schöning, Michael Josef
A1  - Vlasov, Y.
A1  - Iwasaki, H.
T1  - A multisensor based on laser scanned silicon transducer (LSST): development and properties
T2  - Eurosensors XVII : the 17th European Conference on Solid-State Transducers ; University of Minho, Guimarães, Portugal, September 21 - 24, 2003
Y1  - 2003
SP  - 72
EP  - 73
ER  - 
TY  - CHAP
A1  - Eschler, Eric
A1  - Wozniak, Felix
A1  - Richter, Christoph
A1  - Drechsler, Klaus
T1  - Materialanalyse an lokal verstärkten Triaxialgeflechten
T2  - Leichtbau in Forschung und industrieller Anwendung von der Nano- bis zur Makroebene, LLC, Landshuter Leichtbau-Colloquium, 9
Y1  - 2019
SN  - 978-3-9818439-2-7
SP  - 120
EP  - 131
PB  - Leichtbau Cluster
CY  - Landshut
ER  - 
TY  - CHAP
A1  - Essingholt, Felix
A1  - Meyer, Frederic
A1  - Kuhn, Peter
A1  - Schmidt, Philip
A1  - Benkner, Thorsten
A1  - Grabmaier, Anton
T1  - Non-invasive heart beat measurement using microwave resonators
T2  - Proceedings, Vol. 2, Eurosensors 2018 Conference, Graz, Austria, 9–12 September 2018
Y1  - 2018
U6  - https://doi.org/10.3390/proceedings2131002
SN  - 2504-3900
SP  - 1002
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Evans, Benjamin
A1  - Braun, Sebastian
A1  - Ulmer, Jessica
A1  - Wollert, Jörg
T1  - AAS implementations - current problems and solutions
T2  - 20th International Conference on Mechatronics - Mechatronika (ME)
N2  - The fourth industrial revolution presents a multitude of challenges for industries, one of which being the increased flexibility required of manufacturing lines as a result of increased consumer demand for individualised products. One solution to tackle this challenge is the digital twin, more specifically the standardised model of a digital twin also known as the asset administration shell. The standardisation of an industry wide communications tool is a critical step in enabling inter-company operations. This paper discusses the current state of asset administration shells, the frameworks used to host them and their problems that need to be addressed. To tackle these issues, we propose an event-based server capable of drastically reducing response times between assets and asset administration shells and a multi-agent system used for the orchestration and deployment of the shells in the field.
KW  - Industry 4.0
KW  - Multi-agent Systems
KW  - Digital Twin
KW  - Asset Administration Shell
Y1  - 2022
SN  - 978-1-6654-1040-3
U6  - https://doi.org/10.1109/ME54704.2022.9982933
N1  - 20th International Conference on Mechatronics - Mechatronika (ME), 07-09 December 2022, Pilsen, Czech Republic
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Faber, Christian
T1  - Solare Großbäckerei in Burkina Faso als Beispiel eines solaren Prozesswärmesystems
T2  - 14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management
Y1  - 2004
SN  - 3-934681-33-6
SP  - 500
EP  - 505
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Faber, Christian
T1  - Solare Meerwasser-Entsalzungsanlage mit mehrstufiger Wärmerückgewinnung
T2  - 14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management
Y1  - 2004
SN  - 3-934681-33-6
SP  - 154
EP  - 161
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Faber, Christian
T1  - Einfache Systeme zur solaren Deckung des Wärmebedarfs zur Raumheizung, Brauchwassererwärmung und Essenszubereitung in Hochgebirgsregionen
T2  - 14. Symposium Thermische Solarenergie : 12. bis 14. Mai 2004, Kloster Banz, Bad Staffelstein / OTTI-Kolleg Technik, Energie, Management
Y1  - 2004
SN  - 3-934681-33-6
SP  - 264
EP  - 271
PB  - OTTI-Energie-Kolleg
CY  - Regensburg
ER  - 
TY  - CHAP
A1  - Fabo, Sabine
T1  - Audio-visual hybrids : between immersion and detachment
N2  - Close interrelations between sound and image are not a mere phenomenon of today’s multimedia technology. The idea of the synthesis of different media lies at the core of the concept of the Gesamtkunstwerk in the second half of the 19th century and it can also be traced back to the synaesthesia debate at the beginning of the 20th century [...].
KW  - Elektronische Kunst
KW  - Klangkunst
KW  - Hybride Kunst
KW  - Medienkunst
KW  - Hybrid Art
KW  - Sound Art
KW  - Audio-visual Art
Y1  - 2004
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
T1  - Jewelry fabrication via selective laser melting of glass
T2  - ASME 2014 12th Biennial Conference on Engineering Systems Design and Analysis Volume 1: Applied Mechanics; Automotive Systems; Biomedical Biotechnology Engineering; Computational Mechanics; Design; Digital Manufacturing; Education; Marine and Aerospace Applications
N2  - Selective Laser Melting (SLM) is one of the Additive Manufacturing (AM) technologies applicable for producing complex geometries which are typically expensive or difficult to fabricate using conventional methods. This process has been extensively investigated experimentally for various metals and the fabrication process parameters have been established for different applications; however, fabricating 3D glass objects using SLM technology has remained a challenge so far although it could have many applications. This paper presents a summery on various experimental evaluations of a material database incorporating the build parameters of glass powder using the SLM process for jewelry applications.
Y1  - 2014
SN  - 978-0-7918-4583-7
U6  - https://doi.org/10.1115/ESDA2014-20380
SP  - V001T06A005
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Großmann, Agnes
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
T1  - Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
T2  - International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Khosravi, Maziar
T1  - Experimental investigation of selective laser melting of lunar regolith for in-situ applications
T2  - ASME 2013 International Mechanical Engineering Congress and Exposition : San Diego, California, USA, November 15–21, 2013. Vol. 2A: Advanced manufacturing
Y1  - 2013
SN  - 978-0-7918-5618-5
SP  - V02AT02A008
PB  - ASME
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces
T2  - International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA
N2  - The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive manufacturing of drainage segments for cooling system of crucible melting furnaces
T2  - Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials II, International Symposium on Advanced Processing and Manufacturing Technologies for Structural and Multifunctional Materials, ICACC 15, 39th International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, US, Jan 25-30, 2015
Y1  - 2015
U6  - https://doi.org/10.1002/9781119211662.ch14
SN  - 0196-6219
SP  - 123
EP  - 131
PB  - Wiley
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Feldhusen, Jörg
A1  - Brezing, Alexander Nikolaus
A1  - Pütz, Claus
A1  - Wählisch, Georg
T1  - Multi-system CAD-teaching in large classes
T2  - When design education and design research meet : proceedings of the 12th International Conference on Engineering and Product Design Education, Norwegian University of Science and Technology (NTNU) Trondheim, Norway, 2nd - 3rd September 2010 ; [E&PDE]
Y1  - 2010
SN  - 978-1-904670-19-3
SP  - 204
EP  - 209
PB  - Design Society
CY  - Glasgow
ER  - 
TY  - CHAP
A1  - Feldmann, Markus
A1  - Pyschny, D.
A1  - Döring, Bernd
A1  - Kuhnhenne, Markus
T1  - Life cycle assessment of steel constructions
T2  - Life-cycle and sustainability of civil infrastructure systems : proceedings of the Third International Symposium on Life-Cycle Civil Engineering (IALCCE'12) : Vienna, Austria, October 3-6, 2012
Y1  - 2012
SN  - 978-0-203-10336-4
SP  - 321
PB  - Taylor and Francis
CY  - Hoboken
ER  - 
TY  - CHAP
A1  - Fellin, Wolfgang
A1  - King, Julian
A1  - Kirsch, Ansgar
A1  - Oberguggenberger, Michael
T1  - Uncertainty modelling and sensitivity analysis of tunnel face stability
T2  - Safety, reliability and risk of structures, infrastructures and engineering systems : proceedings of the tenth International Conference on Structural Safety and Reliability (ICOSSAR 2009), Osaka, Japan, 13-17 September 2009 / ed.: Hitoshi Furuta ...
Y1  - 2009
SN  - 978-0-415-47557-0
SP  - 112
EP  - 114
PB  - CRC Pr.
CY  - Boca Raton, Fla. [u.a.]
ER  - 
TY  - CHAP
A1  - Fend, Thomas
A1  - Hoffschmidt, Bernhard
A1  - Reutter, Oliver
A1  - Sauerhering, Jörg
A1  - Pitz-Paal, Robert
T1  - Gas flow in hot porous materials: the solar air receiver and spin-off applications
T2  - Proceedings of the 4th Nanochannels, Microchannels and Minichannels - 2006 : presented at 4th Nanochannels, Microchannels and Minichannels, June 19 - 21, 2006, Limerick, Ireland
Y1  - 2006
SN  - 0-7918-4760-8
SP  - 507
EP  - 514
PB  - ASME
CY  - New York, NY
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - 3D-Mapping von Straßentunneln
T2  - 16. Geokinematischer Tag, 07. und 08. Mai 2015 : Tagungsband / Technische Universität Bergakademie Freiberg
Y1  - 2015
N1  - Schriftenreihe des Instituts für Markscheidewesen und Geodsäsie an der Technischen Universität Bergakademie Freiberg
SP  - 31
EP  - 40
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
T1  - Robots: challenges, chances and risks for solving 21st century problems
T2  - President’s Invitation Lecture / South African Institute of Electrical Engineers : May 21 & 22, 2015, University of Johannesburg
Y1  - 2015
SP  - 1
EP  - 45
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Bharatheesha, Mukunda
A1  - Schiffer, Stefan
A1  - Corbato, Carlos Hernandez
T1  - TRROS 2018 :  Teaching Robotics with ROS Workshop at ERF 2018;  Proceedings of the Workshop on Teaching Robotics with ROS (held at ERF 2018), co-located with European Robotics Forum 2018 (ERF 2018), Tampere, Finland, March 15th, 2018
T2  - CEUR Workshop Proceedings
Y1  - 2019
SN  - 1613-0073
IS  - Vol-2329
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Lautermann, Mark
T1  - Towards an autonomous pilot system for a tunnel boring machine
T2  - 5th Robotics and Mechatronics Conference of South Africa (ROBMECH) : 26 - 27 November 2012 ; CSIR International Conference Centre Gauteng South Africa
Y1  - 2012
SN  - 978-1-4673-5183-6
N1  - Robotics and Mechatronics Conference of South Africa <5, 2012, Johannesburg> ; ROBOMECH <5, 2012, Johannesburg>
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Kallweit, Stephan
A1  - Scholl, Ingrid
A1  - Reichert, Walter
T1  - Learning to Program Mobile Robots in the ROS Summer School Series
T2  - Proceedings 6th International Conference on Robotics in Education (RiE 15)
N2  - The main objective of our ROS Summer School series is to introduce MA level students to program mobile robots with the Robot Operating System (ROS). ROS is a robot middleware that is used my many research institutions world-wide. Therefore, many state-of-the-art algorithms of mobile robotics are available in ROS and can be deployed very easily. As a basic robot platform we deploy a 1/10 RC cart that is wquipped with an Arduino micro-controller to control the servo motors, and an embedded PC that runs ROS. In two weeks, participants get to learn the basics of mobile robotics hands-on. We describe our teaching concepts and our curriculum and report on the learning success of our students.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
A1  - Schiffer, Stefan
T1  - AllemaniACs@ home 2006 team description
Y1  - 2006
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemueller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling Logistics Robots with the Action-based Language YAGI
T2  - Proceedings of the 2015 IROS Workshop on Workshop on Task Planning for Intelligent Robots in Service and Manufacturing
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Maier, Christopher
A1  - Mühlbacher, Clemens
A1  - Niemüller, Tim
A1  - Steinbauer, Gerald
A1  - Vassos, Stravros
T1  - Controlling logistics robots with the action-based language YAGI
T2  - Intelligent Robotics and Applications: 9th International Conference, ICIRA 2016, Tokyo, Japan, August 22-24, 2016, Proceedings, Part I
Y1  - 2016
SN  - 978-3-319-43505-3 (Print)
SN  - 978-3-319-43506-0 (Online)
U6  - https://doi.org/10.1007/978-3-319-43506-0_46
N1  - Series: Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics)
VL  - 9834
SP  - 525
EP  - 537
PB  - Springer
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS schooling curricula via contentual taxonomies
T2  - Robotics in Education
N2  - The Robot Operating System (ROS) is the current de-facto standard in robot middlewares. The steadily increasing size of the user base results in a greater demand for training as well. User groups range from students in academia to industry professionals with a broad spectrum of developers in between. To deliver high quality training and education to any of these audiences, educators need to tailor individual curricula for any such training. In this paper, we present an approach to ease compiling curricula for ROS trainings based on a taxonomy of the teaching contents. The instructor can select a set of dedicated learning units and the system will automatically compile the teaching material based on the dependencies of the units selected and a set of parameters for a particular training. We walk through an example training to illustrate our work.
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - https://doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Niemüller, Tim
A1  - Schiffer, Stefan
A1  - Lakemeyer, Gerhard
ED  - Boots, Byron
T1  - Lessons learnt from developing the embodied AI platform CAESAR for domestic service robotics
T2  - Designing intelligent robots : reintegrating AI II ; papers from the AAAI spring symposium ; [held March 25 - 27, 2013 in Palo Alto, California, USA, on the campus of Stanford University]. (Technical Report / Association for the Advancement of Artificial Intelligence ; 2013,4)
Y1  - 2013
SN  - 9781577356011
SP  - 21
EP  - 26
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Potgieter, Anet
A1  - Steinbauer, Gerald
T1  - Self-aware robots - What do we need from learning, deliberation, and reactive control?
T2  - HYCAS 2009 : International Workshop on Hybrid Control of Autonomous Systems : Integrating Learning, Deliberation and Reactive Control : Pasadena, Calif., 13 July 2009
Y1  - 2009
SP  - 1
EP  - 5
PB  - AAAI Pr.
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
A1  - Kallweit, Stephan
T1  - The ROSIN Education Concept - Fostering ROS Industrial-Related Robotics Education in Europe
T2  - ROBOT 2017: Third Iberian Robotics Conference
Y1  - 2018
SN  - 978-3-319-70836-2
U6  - https://doi.org/10.1007/978-3-319-70836-2_31
N1  - Advances in Intelligent Systems and Computing, vol 694;
(AISC, volume 694)
SP  - 370
EP  - 381
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
A1  - Neumann, Tobias
A1  - Krückel, Kai
A1  - Schiffer, Stefan
T1  - A system for continuous underground site mapping and exploration
Y1  - 2019
U6  - https://doi.org/10.5772/intechopen.85859
ER  -