TY  - CHAP
A1  - Thoma, Andreas
A1  - Fisher, Alex
A1  - Braun, Carsten
T1  - Improving the px4 avoid algorithm by bio-inspired flight strategies
T2  - DLRK2020 - „Luft- und Raumfahrt – Verantwortung in allen Dimensionen“
Y1  - 2020
N1  - Deutscher Luft- und Raumfahrtkongress 2020, 1. bis 3. September 2020 – Online, „Luft- und Raumfahrt – Verantwortung in allen Dimensionen“
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Shalaby, Ahmed
A1  - Shasha, Carolyn
A1  - Krishnan, Kannan M.
A1  - Krause, Hans-Joachim
T1  - Comparative modeling of frequency mixing measurements of magnetic nanoparticles using micromagnetic simulations and Langevin theory
JF  - Nanomaterials
N2  - Dual frequency magnetic excitation of magnetic nanoparticles (MNP) enables enhanced biosensing applications. This was studied from an experimental and theoretical perspective: nonlinear sum-frequency components of MNP exposed to dual-frequency magnetic excitation were measured as a function of static magnetic offset field. The Langevin model in thermodynamic equilibrium was fitted to the experimental data to derive parameters of the lognormal core size distribution. These parameters were subsequently used as inputs for micromagnetic Monte-Carlo (MC)-simulations. From the hysteresis loops obtained from MC-simulations, sum-frequency components were numerically demodulated and compared with both experiment and Langevin model predictions. From the latter, we derived that approximately 90% of the frequency mixing magnetic response signal is generated by the largest 10% of MNP. We therefore suggest that small particles do not contribute to the frequency mixing signal, which is supported by MC-simulation results. Both theoretical approaches describe the experimental signal shapes well, but with notable differences between experiment and micromagnetic simulations. These deviations could result from Brownian relaxations which are, albeit experimentally inhibited, included in MC-simulation, or (yet unconsidered) cluster-effects of MNP, or inaccurately derived input for MC-simulations, because the largest particles dominate the experimental signal but concurrently do not fulfill the precondition of thermodynamic equilibrium required by Langevin theory.
KW  - Magnetic nanoparticles
KW  - Frequency mixing magnetic detection
KW  - Langevin theory
KW  - Micromagnetic simulation
KW  - Nonequilibrium dynamics
Y1  - 2021
SN  - 2079-4991
U6  - http://dx.doi.org/10.3390/nano11051257
N1  - This article belongs to the Special Issue Applications and Properties of Magnetic Nanoparticles
VL  - 11
IS  - 5
SP  - 1
EP  - 16
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Bernecker, Andreas
A1  - Boyer, Pierre C.
A1  - Gathmann, Christina
T1  - The Role of Electoral Incentives for Policy Innovation: Evidence from the US Welfare Reform
JF  - American Economic Journal: Economic Policy
Y1  - 2021
U6  - http://dx.doi.org/10.1257/pol.20190690
SN  - 1945-774X
VL  - 13
IS  - 2
SP  - 26
EP  - 57
PB  - American Economic Association
CY  - Nashville, Tenn.
ER  - 
TY  - CHAP
A1  - Thoma, Andreas
A1  - Fisher, Alex
A1  - Bertrand, Olivier
A1  - Braun, Carsten
ED  - Vouloutsi, Vasiliki
ED  - Mura, Anna
ED  - Tauber, Falk
ED  - Speck, Thomas
ED  - Prescott, Tony J.
ED  - Verschure, Paul F. M. J.
T1  - Evaluation of possible flight strategies for close object evasion from bumblebee experiments
T2  - Living Machines 2020: Biomimetic and Biohybrid Systems
KW  - Obstacle avoidance
KW  - Bumblebees
KW  - Flight control
KW  - UAV
KW  - MAV
Y1  - 2020
SN  - 978-3-030-64312-6
U6  - http://dx.doi.org/10.1007/978-3-030-64313-3_34
N1  - 9th International Conference, Living Machines 2020, Freiburg, Germany, July 28–30, 2020, Proceedings
SP  - 354
EP  - 365
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Adams, Moritz
A1  - Losekamm, Martin J.
A1  - Czupalla, Markus
T1  - Development of the Thermal Control System for the RadMap Telescope Experiment on the International Space Station
T2  - International Conference on Environmental Systems
Y1  - 2020
N1  - The proceedings for the 2020 International Conference on Environmental Systems, ICES-2020-179
SP  - 1
EP  - 10
ER  - 
TY  - JOUR
A1  - Valero, Daniel
A1  - Schalko, Isabella
A1  - Friedrich, Heide
A1  - Abad, Jorge D.
A1  - Bung, Daniel B.
A1  - Donchyts, Gennadii
A1  - Felder, Stefan
A1  - Ferreira, Rui M. L.
A1  - Hohermuth, Benjamin
A1  - Kramer, Matthias
A1  - Li, Danxun
A1  - Mendes, Luis
A1  - Moreno-Rodenas, Antonio
A1  - Nones, Michael
A1  - Paron, Paolo
A1  - Ruiz-Villanueva, Virginia
A1  - Wang, Ruo-Qian
A1  - Franca, Mario J.
T1  - Pathways towards democratization of hydro-environment observations and data
JF  - Iahr White Paper Series
Y1  - 2021
IS  - 1
SP  - 1
EP  - 9
PB  - International Association for Hydro-Environment Engineering and Research (IAHR)
ER  - 
TY  - JOUR
A1  - Neumaier, Felix
A1  - Kotliar, Konstantin
A1  - Haeren, Roel Hubert Louis
A1  - Temel, Yasin
A1  - Lüke, Jan Niklas
A1  - Seyam, Osama
A1  - Lindauer, Ute
A1  - Clusmann, Hans
A1  - Hescheler, Jürgen
A1  - Schubert, Gerrit Alexander
A1  - Schneider, Toni
A1  - Albanna, Walid
T1  - Retinal Vessel Responses to Flicker Stimulation Are Impaired in Ca v 2.3-Deficient Mice—An in- vivo Evaluation Using Retinal Vessel Analysis (RVA)
JF  - Frontiers in Neurology
Y1  - 2021
U6  - http://dx.doi.org/10.3389/fneur.2021.659890
VL  - 12
SP  - 1
EP  - 11
PB  - Frontiers
ER  - 
TY  - CHAP
A1  - Akimbekov, Nuraly S.
A1  - Digel, Ilya
A1  - Razzaque, Mohammed S.
T1  - Role of vitamins in maintaining structure and function of intestinal microbiome
T2  - Comprehensive Gut Microbiota
N2  - The recent advances in microbiology have shed light on understanding the role of vitamins beyond the nutritional range. Vitamins are critical in contributing to healthy biodiversity and maintaining the proper function of gut microbiota. The sharing of vitamins among bacterial populations promotes stability in community composition and diversity; however, this balance becomes disturbed in various pathologies. Here, we overview and analyze the ability of different vitamins to selectively and specifically induce changes in the intestinal microbial community. Some schemes and regularities become visible, which may provide new insights and avenues for therapeutic management and functional optimization of the gut microbiota.
KW  - Vitamin A
KW  - Vitamin B
KW  - Thiamine
KW  - Riboflavin
KW  - Niacin
Y1  - 2022
SN  - 978-0-12-822036-8
U6  - http://dx.doi.org/10.1016/B978-0-12-819265-8.00043-7
SP  - 320
EP  - 334
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Hackl, Michael
A1  - Nacov, Julia
A1  - Kammerlohr, Sandra
A1  - Staat, Manfred
A1  - Buess, Eduard
A1  - Leschinger, Tim
A1  - Müller, Lars P.
A1  - Wegmann, Kilian
T1  - Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure
JF  - The American Journal of Sports Medicine
Y1  - 2021
U6  - http://dx.doi.org/10.1177/03635465211006138
SN  - 1552-3365
SN  - 0363-5465
VL  - 49
IS  - 7
SP  - 1847
EP  - 1853
PB  - Sage
CY  - London
ER  - 
TY  - JOUR
A1  - Harzheim, Thomas
A1  - Mühmel, Marc
A1  - Heuermann, Holger
T1  - A SFCW harmonic radar system for maritime search and rescue using passive and active tags
JF  - International Journal of Microwave and Wireless Technologies
N2  - This paper introduces a new maritime search and rescue system based on S-band illumination harmonic radar (HR). Passive and active tags have been developed and tested while attached to life jackets and a small boat. In this demonstration test carried out on the Baltic Sea, the system was able to detect and range the active tags up to a distance of 5800 m using an illumination signal transmit-power of 100 W. Special attention is given to the development, performance, and conceptual differences between passive and active tags used in the system. Guidelines for achieving a high HR dynamic range, including a system components description, are given and a comparison with other HR systems is performed. System integration with a commercial maritime X-band navigation radar is shown to demonstrate a solution for rapid search and rescue response and quick localization.
KW  - Radar
KW  - microwave measurements
KW  - harmonic radar
KW  - harmonic radar tags
KW  - nonlinear VNA measurements
Y1  - 2021
U6  - http://dx.doi.org/10.1017/S1759078721000520
VL  - 13
IS  - Special Issue 7
SP  - 691
EP  - 707
PB  - Cambridge University Press
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Hugenroth, Kristin
A1  - Neidlin, Michael
A1  - Engelmann, Ulrich M.
A1  - Kaufmann, Tim A. S.
A1  - Steinseifer, Ulrich
A1  - Heilmann, Torsten
T1  - Tipless Transseptal Cannula Concept Combines Improved Hemodynamic Properties and Risk‐Reduced Placement: an In Silico Proof‐of‐Concept
JF  - Artificial Organs
Y1  - 2021
U6  - http://dx.doi.org/10.1111/aor.13964
SN  - 1525-1594
IS  - Accepted Article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Götten, Falk
A1  - Havermann, Marc
A1  - Braun, Carsten
A1  - Marino, Matthew
A1  - Bil, Cees
T1  - Aerodynamic Investigations of UAV Sensor Turrets - A Combined Wind-tunnel and CFD Approach
JF  - SciTech 2021, AIAA SciTech Forum, online, WW, Jan 11-15, 2021
Y1  - 2021
U6  - http://dx.doi.org/10.2514/6.2021-1535
SP  - 1
EP  - 12
PB  - AIAA
CY  - Reston, Va.
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS Schooling Curricula via Contentual Taxonomies
T2  - Robotics in Education
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - http://dx.doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - JOUR
A1  - Becht, Alexander
A1  - Schollmayer, Curd
A1  - Monakhova, Yulia
A1  - Holzgrabe, Ulrike
T1  - Tracing the origin of paracetamol tablets by near-infrared, mid-infrared, and nuclear magnetic resonance spectroscopy using principal component analysis and linear discriminant analysis
JF  - Analytical and Bioanalytical Chemistry
N2  - Most drugs are no longer produced in their own countries by the pharmaceutical companies, but by contract manufacturers or at manufacturing sites in countries that can produce more cheaply. This not only makes it difficult to trace them back but also leaves room for criminal organizations to fake them unnoticed. For these reasons, it is becoming increasingly difficult to determine the exact origin of drugs. The goal of this work was to investigate how exactly this is possible by using different spectroscopic methods like nuclear magnetic resonance and near- and mid-infrared spectroscopy in combination with multivariate data analysis. As an example, 56 out of 64 different paracetamol preparations, collected from 19 countries around the world, were chosen to investigate whether it is possible to determine the pharmaceutical company, manufacturing site, or country of origin. By means of suitable pre-processing of the spectra and the different information contained in each method, principal component analysis was able to evaluate manufacturing relationships between individual companies and to differentiate between production sites or formulations. Linear discriminant analysis showed different results depending on the spectral method and purpose. For all spectroscopic methods, it was found that the classification of the preparations to their manufacturer achieves better results than the classification to their pharmaceutical company. The best results were obtained with nuclear magnetic resonance and near-infrared data, with 94.6%/99.6% and 98.7/100% of the spectra of the preparations correctly assigned to their pharmaceutical company or manufacturer.
KW  - IR
KW  - Manufacturer
KW  - Linear discriminant analysis
KW  - Principal component analysis
Y1  - 2021
U6  - http://dx.doi.org/10.1007/s00216-021-03249-z
SN  - 1618-2650
VL  - 413
SP  - 3107
EP  - 3118
PB  - Springer Nature
ER  - 
TY  - JOUR
A1  - Monakhova, Yulia
A1  - Diehl, Bernd W. K.
T1  - A step towards optimization of the qNMR workflow: proficiency testing exercise at an GxP-accredited laboratory
JF  - Applied Magnetic Resonance
N2  - Quantitative nuclear magnetic resonance (qNMR) is considered as a powerful tool for multicomponent mixture analysis as well as for the purity determination of single compounds. Special attention is currently paid to the training of operators and study directors involved in qNMR testing. To assure that only qualified personnel are used for sample preparation at our GxP-accredited laboratory, weighing test was proposed. Sixteen participants performed six-fold weighing of the binary mixture of dibutylated hydroxytoluene (BHT) and 1,2,4,5-tetrachloro-3-nitrobenzene (TCNB). To evaluate the quality of data analysis, all spectra were evaluated manually by a qNMR expert and using in-house developed automated routine. The results revealed that mean values are comparable and both evaluation approaches are free of systematic error. However, automated evaluation resulted in an approximately 20% increase in precision. The same findings were revealed for qNMR analysis of 32 compounds used in pharmaceutical industry. Weighing test by six-fold determination in binary mixtures and automated qNMR methodology can be recommended as efficient tools for evaluating staff proficiency. The automated qNMR method significantly increases throughput and precision of qNMR for routine measurements and extends application scope of qNMR.
Y1  - 2021
U6  - http://dx.doi.org/10.1007/s00723-021-01324-3
SN  - 1613-7507
N1  - Corresponding author: Yulia Monakhova
VL  - 52
SP  - 581
EP  - 593
PB  - Springer Nature
CY  - Wien
ER  - 
TY  - JOUR
A1  - Bohndick, Carla
A1  - Bosse, Elke
A1  - Jänsch, Vanessa K.
A1  - Barnat, Miriam
T1  - How different diversity factors affect the perception of first-year requirements in higher education
JF  - Frontline Learning Research
N2  - In the light of growing university entry rates, higher education institutions not only serve larger numbers of students, but also seek to meet first-year students’ ever more diverse needs. Yet to inform universities how to support the transition to higher education, research only offers limited insights. Current studies tend to either focus on the individual factors that affect student success or they highlight students’ social background and their educational biography in order to examine the achievement of selected, non-traditional groups of students. Both lines of research appear to lack integration and often fail to take organisational diversity into account, such as different types of higher education institutions or degree programmes. For a more comprehensive understanding of student diversity, the present study includes individual, social and organisational factors. To gain insights into their role for the transition to higher education, we examine how the different factors affect the students’ perception of the formal and informal requirements of the first year as more or less difficult to cope with. As the perceived requirements result from both the characteristics of the students and the institutional context, they allow to investigate transition at the interface of the micro and the meso level of higher education. Latent profile analyses revealed that there are no profiles with complex patterns of perception of the first-year requirements, but the identified groups rather differ in the overall level of perceived challenges. Moreover, SEM indicates that the differences in the perception largely depend on the individual factors self-efficacy and volition.
Y1  - 2021
U6  - http://dx.doi.org/10.14786/flr.v9i2.667
SN  - 2295-3159
VL  - 9
IS  - 2
SP  - 78
EP  - 95
PB  - EARLI
ER  - 
TY  - JOUR
A1  - Waldvogel, Janice
A1  - Ritzmann, Ramona
A1  - Freyler, Kathrin
A1  - Helm, Michael
A1  - Monti, Elena
A1  - Albracht, Kirsten
A1  - Stäudle, Benjamin
A1  - Gollhofer, Albert
A1  - Narici, Marco
T1  - The Anticipation of Gravity in Human Ballistic Movement
JF  - Frontiers in Physiology
N2  - Stretch-shortening type actions are characterized by lengthening of the pre-activated muscle-tendon unit (MTU) in the eccentric phase immediately followed by muscle shortening. Under 1 g, pre-activity before and muscle activity after ground contact, scale muscle stiffness, which is crucial for the recoil properties of the MTU in the subsequent push-off. This study aimed to examine the neuro-mechanical coupling of the stretch-shortening cycle in response to gravity levels ranging from 0.1 to 2 g. During parabolic flights, 17 subjects performed drop jumps while electromyography (EMG) of the lower limb muscles was combined with ultrasound images of the gastrocnemius medialis, 2D kinematics and kinetics to depict changes in energy management and performance. Neuro-mechanical coupling in 1 g was characterized by high magnitudes of pre-activity and eccentric muscle activity allowing an isometric muscle behavior during ground contact. EMG during pre-activity and the concentric phase systematically increased from 0.1 to 1 g. Below 1 g the EMG in the eccentric phase was diminished, leading to muscle lengthening and reduced MTU stretches. Kinetic energy at take-off and performance were decreased compared to 1 g. Above 1 g, reduced EMG in the eccentric phase was accompanied by large MTU and muscle stretch, increased joint flexion amplitudes, energy loss and reduced performance. The energy outcome function established by linear mixed model reveals that the central nervous system regulates the extensor muscles phase- and load-specifically. In conclusion, neuro-mechanical coupling appears to be optimized in 1 g. Below 1 g, the energy outcome is compromised by reduced muscle stiffness. Above 1 g, loading progressively induces muscle lengthening, thus facilitating energy dissipation.
Y1  - 2021
U6  - http://dx.doi.org/10.3389/fphys.2021.614060
SN  - 1664-042X
PB  - Frontiers
CY  - Lausanne
ER  - 
TY  - JOUR
A1  - Lowis, Carsten
A1  - Ferguson, Simon
A1  - Paulßen, Elisabeth
A1  - Hoehr, Cornelia
T1  - Improved Sc-44 production in a siphon-style liquid target on a medical cyclotron
JF  - Applied Radiation and Isotopes
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.apradiso.2021.109675
SN  - 0969-8043
VL  - 172
IS  - Art. 109675
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Wert, Stefan
A1  - Iken, Heiko
A1  - Schöning, Michael Josef
A1  - Matysik, Frank-Michael
T1  - Development of a temperature‐pulse enhanced electrochemical glucose biosensor and characterization of its stability via scanning electrochemical microscopy
JF  - Electroanalysis
N2  - Glucose oxidase (GOx) is an enzyme frequently used in glucose biosensors. As increased temperatures can enhance the performance of electrochemical sensors, we investigated the impact of temperature pulses on GOx that was drop-coated on flattened Pt microwires. The wires were heated by an alternating current. The sensitivity towards glucose and the temperature stability of GOx was investigated by amperometry. An up to 22-fold increase of sensitivity was observed. Spatially resolved enzyme activity changes were investigated via scanning electrochemical microscopy. The application of short (<100 ms) heat pulses was associated with less thermal inactivation of the immobilized GOx than long-term heating.
Y1  - 2021
U6  - http://dx.doi.org/10.1002/elan.202100089
SN  - 1521-4109
IS  - Early View
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Maurischat, Andreas
T1  - Algebraic independence of the Carlitz period and its hyperderivatives
KW  - Drinfeld modules
KW  - t-modules
KW  - Transcendence
KW  - Hyperdifferentials
Y1  - 2021
N1  - Zweitveröffentlichung.
Verlagsveröffentlichung: https://doi.org/10.1016/j.jnt.2022.01.006
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - El Moussaoui, Noureddine
A1  - Kassmi, Khalil
A1  - Alexopoulos, Spiros
A1  - Schwarzer, Klemens
A1  - Chayeb, Hamid
A1  - Bachiri, Najib
T1  - Simulation studies on a new innovative design of a hybrid solar distiller MSDH alimented with a thermal and photovoltaic energy
T2  - Materialstoday: Proceedings
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.matpr.2021.03.115
SN  - 2214-7853
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Drinic, Aleksander
A1  - Iken, Heiko
A1  - Kröger, Nadja
A1  - Zinser, Max
A1  - Smeets, Ralf
A1  - Köpf, Marius
A1  - Kopp, Alexander
A1  - Schöning, Michael Josef
T1  - Towards a flexible electrochemical biosensor fabricated from biocompatible Bombyx mori silk
JF  - Biosensors and Bioelectronics
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.bios.2021.113204
SN  - 0956-5663
VL  - 183
IS  - Art. 113204
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Bayer, Robin
T1  - Development of a novel in-vitro vascular model for determination of physiological and pathophysiological mechanobiology
Y1  - 2021
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:38-362212
N1  - Dissertation, Universität zu Köln, 2021
PB  - Universität zu Köln
CY  - Köln
ER  - 
TY  - JOUR
A1  - Jildeh, Zaid B.
A1  - Wagner, Patrick H.
A1  - Schöning, Michael Josef
T1  - Sterilization of Objects, Products, and Packaging Surfaces and Their Characterization in Different Fields of Industry: The Status in 2020
JF  - physica status solidi (a) applications and materials science
N2  - The treatment method to deactivate viable microorganisms from objects or products is termed sterilization. There are multiple forms of sterilization, each intended to be applied for a specific target, which depends on—but not limited to—the thermal, physical, and chemical stability of that target. Herein, an overview on the currently used sterilization processes in the global market is provided. Different sterilization techniques are grouped under a category that describes the method of treatment: radiation (gamma, electron beam, X-ray, and ultraviolet), thermal (dry and moist heat), and chemical (ethylene oxide, ozone, chlorine dioxide, and hydrogen peroxide). For each sterilization process, the typical process parameters as defined by regulations and the mode of antimicrobial activity are summarized. Finally, the recommended microorganisms that are used as biological indicators to validate sterilization processes in accordance with the rules that are established by various regulatory agencies are summarized.
KW  - bioburdens
KW  - sterility tests
KW  - sterilization efficacy
KW  - sterilization methods
KW  - validation methods
Y1  - 2021
U6  - http://dx.doi.org/10.1002/pssa.202000732
SN  - 1862-6319
N1  - Corresponding author: Michael J. Schöning
VL  - 218
IS  - 13
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Eckert, Alexander
A1  - Abbasi, Mozhdeh
A1  - Mang, Thomas
A1  - Saalwächter, Kay
A1  - Walther, Andreas
T1  - Structure, Mechanical Properties, and Dynamics of Polyethylenoxide/Nanoclay Nacre-Mimetic Nanocomposites
JF  - Macromolecules
N2  - Nacre-mimetic nanocomposites based on high fractions of synthetic high-aspect-ratio nanoclays in combination with polymers are continuously pushing boundaries for advanced material properties, such as high barrier against oxygen, extraordinary mechanical behavior, fire shielding, and glass-like transparency. Additionally, they provide interesting model systems to study polymers under nanoconfinement due to the well-defined layered nanocomposite arrangement. Although the general behavior in terms of forming such layered nanocomposite materials using evaporative self-assembly and controlling the nanoclay gallery spacing by the nanoclay/polymer ratio is understood, some combinations of polymer matrices and nanoclay reinforcement do not comply with the established models. Here, we demonstrate a thorough characterization and analysis of such an unusual polymer/nanoclay pair that falls outside of the general behavior. Poly(ethylene oxide) (PEO) and sodium fluorohectorite form nacre-mimetic, lamellar nanocomposites that are completely transparent and show high mechanical stiffness and high gas barrier, but there is only limited expansion of the nanoclay gallery spacing when adding increasing amounts of polymer. This behavior is maintained for molecular weights of PEO varied over four orders of magnitude and can be traced back to depletion forces. By careful investigation via X-ray diffraction and proton low-resolution solid-state NMR, we are able to quantify the amount of mobile and immobilized polymer species in between the nanoclay galleries and around proposed tactoid stacks embedded in a PEO matrix. We further elucidate the unusual confined polymer dynamics, indicating a relevant role of specific surface interactions.
Y1  - 2020
U6  - http://dx.doi.org/10.1021/acs.macromol.9b01931
SN  - 1520-5835
VL  - 53
IS  - 5
SP  - 1716
EP  - 1725
PB  - ACS Publications
CY  - Washington, DC
ER  - 
TY  - JOUR
A1  - Yoshinobu, Tatsuo
A1  - Schöning, Michael Josef
T1  - Light-addressable potentiometric sensors (LAPS) for cell monitoring and biosensing
JF  - Current Opinion in Electrochemistry
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.coelec.2021.100727
SN  - 2451-9103
IS  - In Press, Journal Pre-proof
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bergs, Michel
A1  - Monakhova, Yulia
A1  - Diehl, Bernd W.
A1  - Konow, Christopher
A1  - Völkering, Georg
A1  - Pude, Ralf
A1  - Schulze, Margit
T1  - Lignins isolated via catalyst-free organosolv pulping from Miscanthus x giganteus, M. sinensis, M. robustus and M. nagara: a comparative study
JF  - Molecules
N2  - As a low-input crop, Miscanthus offers numerous advantages that, in addition to agricultural applications, permits its exploitation for energy, fuel, and material production. Depending on the Miscanthus genotype, season, and harvest time as well as plant component (leaf versus stem), correlations between structure and properties of the corresponding isolated lignins differ. Here, a comparative study is presented between lignins isolated from M. x giganteus, M. sinensis, M. robustus and M. nagara using a catalyst-free organosolv pulping process. The lignins from different plant constituents are also compared regarding their similarities and differences regarding monolignol ratio and important linkages. Results showed that the plant genotype has the weakest influence on monolignol content and interunit linkages. In contrast, structural differences are more significant among lignins of different harvest time and/or season. Analyses were performed using fast and simple methods such as nuclear magnetic resonance (NMR) spectroscopy. Data was assigned to four different linkages (A: β-O-4 linkage, B: phenylcoumaran, C: resinol, D: β-unsaturated ester). In conclusion, A content is particularly high in leaf-derived lignins at just under 70% and significantly lower in stem and mixture lignins at around 60% and almost 65%. The second most common linkage pattern is D in all isolated lignins, the proportion of which is also strongly dependent on the crop portion. Both stem and mixture lignins, have a relatively high share of approximately 20% or more (maximum is M. sinensis Sin2 with over 30%). In the leaf-derived lignins, the proportions are significantly lower on average. Stem samples should be chosen if the highest possible lignin content is desired, specifically from the M. x giganteus genotype, which revealed lignin contents up to 27%. Due to the better frost resistance and higher stem stability, M. nagara offers some advantages compared to M. x giganteus. Miscanthus crops are shown to be very attractive lignocellulose feedstock (LCF) for second generation biorefineries and lignin generation in Europe.
Y1  - 2021
U6  - http://dx.doi.org/10.3390/molecules26040842
SN  - 1420-3049
N1  - Special Issue Lignin – A Natural Resource with Huge Potential https://www.mdpi.com/journal/molecules/special_issues/lignin_natural
VL  - 26
IS  - 4
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Nguyen-Xuan, H.
A1  - Rabczuk, T.
A1  - Nguyen-Thoi, T.
A1  - Tran, Thanh Ngoc
A1  - Nguyen-Thanh, N.
T1  - Computation of limit and shakedown loads using a node-based smoothed finite element method
JF  - International Journal for Numerical Methods in Engineering
N2  - This paper presents a novel numerical procedure for computing limit and shakedown loads of structures using a node-based smoothed FEM in combination with a primal–dual algorithm. An associated primal–dual form based on the von Mises yield criterion is adopted. The primal-dual algorithm together with a Newton-like iteration are then used to solve this associated primal–dual form to determine simultaneously both approximate upper and quasi-lower bounds of the plastic collapse limit and the shakedown limit. The present formulation uses only linear approximations and its implementation into finite element programs is quite simple. Several numerical examples are given to show the reliability, accuracy, and generality of the present formulation compared with other available methods.
Y1  - 2011
U6  - http://dx.doi.org/10.1002/nme.3317
SN  - 1097-0207
VL  - 90
IS  - 3
SP  - 287
EP  - 310
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Bergmann, Kevin
A1  - Gräbener, Josefine
A1  - Wild, Dominik
A1  - Ulfers, H.
A1  - Czupalla, Markus
T1  - Study on thermal stabilization of a GEO-stationary telescope baffling system by integral application of phase change material
T2  - International Conference on Environmental Systems
N2  - The utilization of phase change material (PCM) for latent heat storage and thermal control of spacecraft has been demonstrated in the past in few missions only. One limiting factor was the fact that all concepts developed so far envisioned the PCM to be applied as an additional capacitor, encapsulated in its own housing, leading to mass, efficiency and accommodation challenges. Recently, the application of PCM within the scan cavity of a GEOS type satellite has been suggested, in order to tackle thermal issues due to direct sun intrusion (Choi, M., 2014). However, the application of PCM in such complex mechanical structures is extremely challenging. A new concept to tackle this issue is currently under development at the FH Aachen University of Applied Sciences. The concept "Infused Thermal Solutions (ITS)" is based on the idea to 3D print metallic structures in their regular functional shape, but double walled with internal lattice support structures, allowing the infusion of a PCM layer directly into the voids and eliminating the need for additional parts and interfaces. Together with OHB System, FH Aachen theoretically studied the application of this technology to the Meteosat Third Generation (MTG) Infra-Red Sounder (IRS) instrument. The study focuses on the scan cavity and entrance baffling assembly (EBA) of the IRS. It consists of thermal analyses, 3D-redesign and bread boarding of a scaled and PCM infused EBA version. In the thermal design of the alternative EBA, PCM was applied directly into the EBA, simulating the worst hot case sun intrusion of the mission. By applying 4kg of PCM (to a 60kg baffle) the EBA temperature excursions during sun intrusion were limited from 140K to 30K, leading to a significant thermo-opto-elastic performance gain. This paper introduces the ITS concept development status.
Y1  - 2019
N1  - 49th International Conference on Environmental Systems, 7-11 July 2019, Boston, Massachusetts ; ICES-2019-72
SP  - 1
EP  - 14
ER  - 
TY  - THES
A1  - Beckmann, Nils
T1  - Characterization of the hydrogen-dry-low-Nox-micromix-combustion-principle for hydrogen-methane fuel mixtures
KW  - Low NOx
KW  - Hydrogen
KW  - Combustion
KW  - Low emission
Y1  - 2019
N1  - Dissertation, RMIT University, August 2019
PB  - RMIT University
CY  - Melbourne
ER  - 
TY  - CHAP
A1  - Schulte, Maximilian
A1  - Eggert, Mathias
T1  - Predicting hourly bitcoin prices based on long short-term memory neural networks
T2  - Proceedings of the International Conference on Wirtschaftsinformatik (WI) 2021
N2  - Bitcoin is a cryptocurrency and is considered a high-risk asset
class whose price changes are difficult to predict. Current research focusses
on daily price movements with a limited number of predictors. The paper at
hand aims at identifying measurable indicators for Bitcoin price movement s
and the development of a suitable forecasting model for hourly changes. The
paper provides three research contributions. First, a set of significant
indicators for predicting the Bitcoin price is identified. Second, the results of
a trained Long Short-term Memory (LSTM) neural network that predicts
price changes on an hourly basis is presented and compared with other
algorithms. Third, the results foster discussions of the applicability of neural
nets for stock price predictions. In total, 47 input features for a period of
over 10 months could be retrieved to train a neural net that predicts the
Bitcoin price movements with an error rate of 3.52 %.
Y1  - 2021
N1  - 16th International Conference on Wirtschaftsinformatik,
March 2021, Essen, Germany
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Beckmann, Nils
A1  - Keinz, Jan
A1  - Horikawa, Atsushi
T1  - 30 years of dry low NOx micromix combustor research for hydrogen-rich fuels: an overview of past and present activities
T2  - Proceedings of the ASME Turbo Expo 2020: Turbomachinery Technical Conference and Exposition, September 21–25, 2020, Virtual, Online. Vol.: 4B: Combustion, Fuels, and Emissions
KW  - Micromix
KW  - Hydrogen
KW  - Fuel-flexibility
KW  - NOx
KW  - Emissions
Y1  - 2021
SN  - 978-0-7918-8413-3
U6  - http://dx.doi.org/10.1115/GT2020-16328
N1  - Paper No. GT2020-16328, V04BT04A069
PB  - American Society of Mechanical Engineers (ASME)
ER  - 
TY  - JOUR
A1  - Ayed, Anis Haj
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Keinz, Jan
A1  - Bohn, D.
T1  - CFD based exploration of the dry-low-NOx hydrogen micromix combustion technology at increased energy densities
JF  - Propulsion and Power Research
KW  - Micromix combustion
KW  - Hydrogen gas turbine
KW  - Hydrogen combustion
KW  - High hydrogen combustion
KW  - Dry-low-NOx (DLN) combustion
Y1  - 2017
SN  - 2212-540X
U6  - http://dx.doi.org/10.1016/j.jppr.2017.01.005
VL  - 6
IS  - 1
SP  - 15
EP  - 24
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Ayed, Anis Haj
A1  - Striegan, Constantin J. D.
A1  - Kusterer, Karsten
A1  - Funke, Harald
A1  - Kazari, M.
A1  - Horikawa, Atsushi
A1  - Okada, Kunio
T1  - Automated design space exploration of the hydrogen fueled "Micromix" combustor technology
N2  - Combined with the use of renewable energy sources for
its production, Hydrogen represents a possible alternative gas
turbine fuel for future low emission power generation. Due to
its different physical properties compared to other fuels such
as natural gas, well established gas turbine combustion
systems cannot be directly applied for Dry Low NOx (DLN)
Hydrogen combustion. This makes the development of new
combustion technologies an essential and challenging task
for the future of hydrogen fueled gas turbines.
The newly developed and successfully tested “DLN
Micromix” combustion technology offers a great potential to
burn hydrogen in gas turbines at very low NOx emissions.
Aiming to further develop an existing burner design in terms
of increased energy density, a redesign is required in order to
stabilise the flames at higher mass flows and to maintain low
emission levels.
For this purpose, a systematic design exploration has
been carried out with the support of CFD and optimisation
tools to identify the interactions of geometrical and design
parameters on the combustor performance. Aerodynamic
effects as well as flame and emission formation are observed
and understood time- and cost-efficiently. Correlations
between single geometric values, the pressure drop of the
burner and NOx production have been identified as a result.
This numeric methodology helps to reduce the effort of
manufacturing and testing to few designs for single
validation campaigns, in order to confirm the flame stability
and NOx emissions in a wider operating condition field.
Y1  - 2017
N1  - Proceedings of the 1st Global Power and Propulsion Forum
GPPF 2017, Jan 16-18, 2017, Zurich, Switzerland
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Harzheim, Thomas
A1  - Mühmel, Marc
T1  - A maritime harmonic radar search and rescue system using passive and active tags
T2  - 2020 17th European Radar Conference (EuRAD)
KW  - Harmonic Radar
KW  - Rescue System
KW  - Frequency Doubler
KW  - Transponder
KW  - Tag
Y1  - 2021
SN  - 978-2-87487-061-3
U6  - http://dx.doi.org/10.1109/EuRAD48048.2021.00030
N1  - Proceedings of the 17th European Radar Conference, 
13th - 15th January 2021, Utrecht, Netherlands
SP  - 73
EP  - 76
PB  - IEEE
ER  - 
TY  - JOUR
A1  - Engemann, Heiko
A1  - Du, Shengzhi
A1  - Kallweit, Stephan
A1  - Cönen, Patrick
A1  - Dawar, Harshal
T1  - OMNIVIL - an autonomous mobile manipulator for flexible production
JF  - Sensors
Y1  - 2020
SN  - 1424-8220
U6  - http://dx.doi.org/10.3390/s20247249
N1  - Special issue: Sensor Networks Applications in Robotics and Mobile Systems
VL  - 20
IS  - 24, art. no. 7249
SP  - 1
EP  - 30
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Mistler, M.
A1  - Butenweg, Christoph
A1  - Anthoine, A.
T1  - Evaluation of the failure criterion for masonry by homogenisation
T2  - Proceedings of the Seventh International Conference on Computational Structures Technology : [Lisbon, Portugal, 7 - 9 September 2004] / ed. by B. H. V. Topping and C.A. Mota Soares
Y1  - 2004
SN  - 0-948749-95-4
U6  - http://dx.doi.org/10.4203/ccp.79.201
PB  - Civil-Comp Press
CY  - Stirling
ER  - 
TY  - JOUR
A1  - Jablonski, Melanie
A1  - Münstermann, Felix
A1  - Nork, Jasmina
A1  - Molinnus, Denise
A1  - Muschallik, Lukas
A1  - Bongaerts, Johannes
A1  - Wagner, Torsten
A1  - Keusgen, Michael
A1  - Siegert, Petra
A1  - Schöning, Michael Josef
T1  - Capacitive field‐effect biosensor applied for the detection of acetoin in alcoholic beverages and fermentation broths
JF  - physica status solidi (a) applications and materials science
N2  - An acetoin biosensor based on a capacitive electrolyte–insulator–semiconductor (EIS) structure modified with the enzyme acetoin reductase, also known as butane-2,3-diol dehydrogenase (Bacillus clausii DSM 8716ᵀ), is applied for acetoin detection in beer, red wine, and fermentation broth samples for the first time. The EIS sensor consists of an Al/p-Si/SiO₂/Ta₂O₅ layer structure with immobilized acetoin reductase on top of the Ta₂O₅ transducer layer by means of crosslinking via glutaraldehyde. The unmodified and enzyme-modified sensors are electrochemically characterized by means of leakage current, capacitance–voltage, and constant capacitance methods, respectively.
KW  - acetoin
KW  - acetoin reductase
KW  - alcoholic beverages
KW  - biosensors
KW  - capacitive field-effect sensors
Y1  - 2021
U6  - http://dx.doi.org/10.1002/pssa.202000765
SN  - 1862-6319
VL  - 218
IS  - 13
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Engemann, Heiko
A1  - Du, Shengzhi
A1  - Kallweit, Stephan
A1  - Ning, Chuanfang
A1  - Anwar, Saqib
T1  - AutoSynPose: Automatic Generation of Synthetic Datasets for 6D Object Pose Estimation
T2  - Machine Learning and Artificial Intelligence. Proceedings of MLIS 2020
N2  - We present an automated pipeline for the generation of synthetic datasets for six-dimension (6D) object pose estimation. Therefore, a completely automated generation process based on predefined settings is developed, which enables the user to create large datasets with a minimum of interaction and which is feasible for applications with a high object variance. The pipeline is based on the Unreal 4 (UE4) game engine and provides a high variation for domain randomization, such as object appearance, ambient lighting, camera-object transformation and distractor density. In addition to the object pose and bounding box, the metadata includes all randomization parameters, which enables further studies on randomization parameter tuning. The developed workflow is adaptable to other 3D objects and UE4 environments. An exemplary dataset is provided including five objects of the Yale-CMU-Berkeley (YCB) object set. The datasets consist of 6 million subsegments using 97 rendering locations in 12 different UE4 environments. Each dataset subsegment includes one RGB image, one depth image and one class segmentation image at pixel-level.
Y1  - 2020
SN  - 978-1-64368-137-5
U6  - http://dx.doi.org/10.3233/FAIA200770
N1  - Frontiers in Artificial Intelligence and Applications. Vol 332
SP  - 89
EP  - 97
PB  - IOS Press
CY  - Amsterdam
ER  - 
TY  - THES
A1  - Bronder, Thomas
T1  - Label-free detection of tuberculosis DNA with capacitive field-effect biosensors
Y1  - 2020
U6  - http://dx.doi.org/10.17192/z2021.0056
N1  - Dissertation, Universität, Marburg 2020
PB  - Philipps-Universität Marburg
CY  - Marburg
ER  - 
TY  - JOUR
A1  - Givanoudi, Stella
A1  - Cornelis, Peter
A1  - Rasschaert, Geertrui
A1  - Wackers, Gideon
A1  - Iken, Heiko
A1  - Rolka, David
A1  - Yongabi, Derick
A1  - Robbens, Johan
A1  - Schöning, Michael Josef
A1  - Heyndrickx, Marc
A1  - Wagner, Patrick
T1  - Selective Campylobacter detection and quantification in poultry: A sensor tool for detecting the cause of a common zoonosis at its source
JF  - Sensors and Actuators B: Chemical
Y1  - 2021
U6  - http://dx.doi.org/10.1016/j.snb.2021.129484
SN  - 0925-4005
IS  - In Press, Journal Pre-proof
SP  - Article 129484
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Morat, Mareike
A1  - Faude, Oliver
A1  - Hanssen, Henner
A1  - Ludyga, Sebastian
A1  - Zacher, Jonas
A1  - Eibl, Angi
A1  - Albracht, Kirsten
A1  - Donath, Lars
T1  - Agility Training to Integratively Promote Neuromuscular, Cognitive, Cardiovascular and Psychosocial Function in Healthy Older Adults: A Study Protocol of a One-Year Randomized-Controlled Trial
JF  - International Journal of Environmental Research and Public Health
N2  - Exercise training effectively mitigates aging-induced health and fitness impairments. Traditional training recommendations for the elderly focus separately on relevant physiological fitness domains, such as balance, flexibility, strength and endurance. Thus, a more holistic and functional training framework is needed. The proposed agility training concept integratively tackles spatial orientation, stop and go, balance and strength. The presented protocol aims at introducing a two-armed, one-year randomized controlled trial, evaluating the effects of this concept on neuromuscular, cardiovascular, cognitive and psychosocial health outcomes in healthy older adults. Eighty-five participants were enrolled in this ongoing trial. Seventy-nine participants completed baseline testing and were block-randomized to the agility training group or the inactive control group. All participants undergo pre- and post-testing with interim assessment after six months. The intervention group currently receives supervised, group-based agility training twice a week over one year, with progressively demanding perceptual, cognitive and physical exercises. Knee extension strength, reactive balance, dual task gait speed and the Agility Challenge for the Elderly (ACE) serve as primary endpoints and neuromuscular, cognitive, cardiovascular, and psychosocial meassures serve as surrogate secondary outcomes. Our protocol promotes a comprehensive exercise training concept for older adults, that might facilitate stakeholders in health and exercise to stimulate relevant health outcomes without relying on excessively time-consuming physical activity recommendations.
KW  - agility
KW  - prevention
KW  - healthy aging
KW  - community dwelling
KW  - psychosocial
Y1  - 2020
U6  - http://dx.doi.org/10.3390/ijerph17061853
SN  - 1660-4601
VL  - 17
IS  - 6
SP  - 1
EP  - 14
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Pogorelova, Natalia
A1  - Rogachev, Evgeniy
A1  - Digel, Ilya
A1  - Chernigova, Svetlana
A1  - Nardin, Dmitry
T1  - Bacterial Cellulose Nanocomposites: Morphology and Mechanical Properties
JF  - Materials
N2  - Bacterial cellulose (BC) is a promising material for biomedical applications due to its unique properties such as high mechanical strength and biocompatibility. This article describes the microbiological synthesis, modification, and characterization of the obtained BC-nanocomposites originating from symbiotic consortium Medusomyces gisevii. Two BC-modifications have been obtained: BC-Ag and BC-calcium phosphate (BC-Ca3(PO4)2). Structure and physicochemical properties of the BC and its modifications were investigated by scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), atomic force microscopy (AFM), and infrared Fourier spectroscopy as well as by measurements of mechanical and water holding/absorbing capacities. Topographic analysis of the surface revealed multicomponent thick fibrils (150–160 nm in diameter and about 15 µm in length) constituted by 50–60 nm nanofibrils weaved into a left-hand helix. Distinctive features of Ca-phosphate-modified BC samples were (a) the presence of 500–700 nm entanglements and (b) inclusions of Ca3(PO4)2 crystals. The samples impregnated with Ag nanoparticles exhibited numerous roundish inclusions, about 110 nm in diameter. The boundaries between the organic and inorganic phases were very distinct in both cases. The Ag-modified samples also showed a prominent waving pattern in the packing of nanofibrils. The obtained BC gel films possessed water-holding capacity of about 62.35 g/g. However, the dried (to a constant mass) BC-films later exhibited a low water absorption capacity (3.82 g/g). It was found that decellularized BC samples had 2.4 times larger Young’s modulus and 2.2 times greater tensile strength as compared to dehydrated native BC films. We presume that this was caused by molecular compaction of the BC structure.
Y1  - 2020
SN  - 1996-1944
U6  - http://dx.doi.org/10.3390/ma13122849
VL  - 13
IS  - 12
SP  - 1
EP  - 16
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Zhubanova, Azhar A.
A1  - Mansurov, Zulkhair A.
A1  - Digel, Ilya
T1  - Use of Advanced Nanomaterials for Bioremediation of Contaminated Ecosystems
T2  - Carbon Nanomaterials in Biomedicine and the Environment
N2  - This chapter shows that nanomaterials obtained by high-temperature carbonization of inexpensive plant raw material such as rice husk, grape seeds, and walnut shells can serve as a basis for the production of highly efficient microbial drugs, biodestructors, biosorbents, and biocatalysts, which are promising for the remediation of the ecosystem contaminated with heavy and radioactive metals, oil and oil products. A strong interest in engineering zymology is dictated by the necessity to address the issues of monitoring enzymatic processes, treatment, and diagnosis of a number of common human diseases, environmental pollution, quality control of pharmaceuticals and food. Nanomaterials obtained by high-temperature carbonization of cheap plant raw material such as-rice husks, grape seeds and walnut shells, can serve as a basis for creating of highly effective microbial preparations-biodestructors, biosorbents and biocatalysts, which are promising for the use of contaminated ecosystems, and for restoration of human intestine microecology.
Y1  - 2020
SN  - 978-981-4800-27-3
U6  - http://dx.doi.org/10.1201/9780429428647-18
SP  - 353
EP  - 378
PB  - Jenny Stanford Publishing
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Savitskaya, Irina S.
A1  - Kistaubayeva, Aida S.
A1  - Akimbekov, Nuraly
A1  - Digel, Ilya
A1  - Shokatayeva, Dina
A1  - Zhubanova, Azhar Achmet
T1  - Prospective Use of Probiotics Immobilized on Sorbents with Nanostructured Surfaces
T2  - Carbon Nanomaterials in Biomedicine and the Environment
N2  - Activated carbons are known as excellent adsorbents. Their applications include the adsorptive removal of color, odor, taste, undesirable organic and inorganic pollutants from drinking and waste water; air purification in inhabited spaces; purification of many chemicals, pharmaceutical products and many others. This chapter elucidates the role of normal microflora in the maintenance of human health and presents materials on possible clinical displays of microecological infringements and ways of their correction. It presents new developments concerning new probiotics with immobilized Lactobacillus and Bacillus. The chapter considers the mechanisms of the intestine disbacteriosis correction by sorbed probiotics. It demonstrates the advantages and creation prospects of immobilized probiotics developed on the basis of carbonized rice husk. There are great prospects for the development of medical biotechnology due to use of carbon sorbents with a nanostructured surface. Microbial communities form a biocenosis of the biotope and together with the host organism create permanent or temporary ecosystems.
Y1  - 2020
SN  - 978-981-4800-27-3
U6  - http://dx.doi.org/10.1201/9780429428647-12
SP  - 229
EP  - 267
PB  - Jenny Stanford Publishing
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Akimbekov, Nuraly
A1  - Zhanadilovna, Abdieva G.
A1  - Ualieva, Perizat S.
A1  - Abaihanovna, Zhusipova D.
A1  - Digel, Ilya
A1  - Savitskaya, Irina S.
A1  - Zhubanova, Azhar Achmet
T1  - Functionalization of Carbon Based Wound Dressings with Antimicrobial Phytoextracts for Bioactive Treatment of Septic Wounds
T2  - Carbon Nanomaterials in Biomedicine and the Environment
N2  - The treatment of septic wounds with curative dressings based on biocomposites containing sage and marigold phytoextracts was effective in in vitro and in vivo experiments. These dressings caused the purification of the wound surface from purulent-necrotic masses three days earlier than in the other experimental groups. The consequence of an increase in incidents of severe course of the wound and the observed tendency to increase the number of adverse effects is the development of long-term recurrent wound processes. To treat purulent wounds, the following tactics were used: The purulent wounds of animals were covered with the examined wound dressing, and then the next day samples were taken, the procedure was performed once in 2 days. To obtain the active nanostructured sorbents such as carbonized rice husks, they are functionalized with biologically active components possessing antimicrobial, anti-inflammatory, antitoxic, immunomodulating, antiallergic and other types of properties.
Y1  - 2020
SN  - 978-981-4800-27-3
U6  - http://dx.doi.org/10.1201/9780429428647-11
SP  - 211
EP  - 228
PB  - Jenny Stanford Publishing
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Mansurov, Zulkhair A.
A1  - Jandosov, Jakpar
A1  - Chenchik, D.
A1  - Azat, Seitkhan
A1  - Savitskaya, Irina S.
A1  - Kistaubaeva, Aida
A1  - Akimbekov, Nuraly
A1  - Digel, Ilya
A1  - Zhubanova, Azhar Achmet
T1  - Biocomposite Materials Based on Carbonized Rice Husk in Biomedicine and Environmental Applications
T2  - Carbon Nanomaterials in Biomedicine and the Environment
N2  - This chapter describes the prospects for biomedical and environmental engineering applications of heterogeneous materials based on nanostructured carbonized rice husk. Efforts in engineering enzymology are focused on the following directions: development and optimization of immobilization methods leading to novel biotechnological and biomedical applications; construction of biocomposite materials based on individual enzymes, multi-enzyme complexes and whole cells, targeted on realization of specific industrial processes. Molecular biological and biochemical studies on cell adhesion focus predominantly on identification, isolation and structural analysis of attachment-responsible biological molecules and their genetic determinants. The chapter provides a short overview of applications of the biocomposite materials based of nanostructured carbonized adsorbents. It emphasizes that further studies and better understanding of the interactions between CNS and microbial cells are necessary. The future use of living cells as biocatalysts, especially in the environmental field, needs more systematic investigations of the microbial adsorption phenomenon.
Y1  - 2020
SN  - 978-981-4800-27-3
U6  - http://dx.doi.org/10.1201/9780429428647-2
SP  - 3
EP  - 32
PB  - Jenny Stanford Publishing Pte. Ltd.
CY  - Singapore
ER  - 
TY  - JOUR
A1  - Jablonski, Melanie
A1  - Poghossian, Arshak
A1  - Severin, Robin
A1  - Keusgen, Michael
A1  - Wege, Christian
A1  - Schöning, Michael Josef
T1  - Capacitive Field-Effect Biosensor Studying Adsorption of Tobacco Mosaic Virus Particles
JF  - Micromachines
N2  - Plant virus-like particles, and in particular, tobacco mosaic virus (TMV) particles, are increasingly being used in nano- and biotechnology as well as for biochemical sensing purposes as nanoscaffolds for the high-density immobilization of receptor molecules. The sensitive parameters of TMV-assisted biosensors depend, among others, on the density of adsorbed TMV particles on the sensor surface, which is affected by both the adsorption conditions and surface properties of the sensor. In this work, Ta₂O₅-gate field-effect capacitive sensors have been applied for the label-free electrical detection of TMV adsorption. The impact of the TMV concentration on both the sensor signal and the density of TMV particles adsorbed onto the Ta₂O₅-gate surface has been studied systematically by means of field-effect and scanning electron microscopy methods. In addition, the surface density of TMV particles loaded under different incubation times has been investigated. Finally, the field-effect sensor also demonstrates the label-free detection of penicillinase immobilization as model bioreceptor on TMV particles.
KW  - capacitive field-effect sensor
KW  - plant virus detection
KW  - tobacco mosaic virus (TMV)
KW  - TMV adsorption
KW  - Ta₂O₅ gate
Y1  - 2021
U6  - http://dx.doi.org/10.3390/mi12010057
VL  - 12
IS  - 1
PB  - MDPI
CY  - Basel
ER  - 
TY  - JOUR
A1  - Roepke, Rene
A1  - Köhler, Klemens
A1  - Drury, Vincent
A1  - Schroeder, Ulrik
A1  - Wolf, Martin
A1  - Meyer, Ulrike
T1  - A pond full of phishing games - analysis of learning games for anti-phishing education
JF  - Model-driven Simulation and Training Environments for Cybersecurity. MSTEC 2020
N2  - Game-based learning is a promising approach to anti-phishing education, as it fosters motivation and can help reduce the perceived difficulty of the educational material. Over the years, several prototypes for game-based applications have been proposed, that follow different approaches in content selection, presentation, and game mechanics. In this paper, a literature and product review of existing learning games is presented. Based on research papers and accessible applications, an in-depth analysis was conducted, encompassing target groups, educational contexts, learning goals based on Bloom’s Revised Taxonomy, and learning content. As a result of this review, we created the publications on games (POG) data set for the domain of anti-phishing education. While there are games that can convey factual and conceptual knowledge, we find that most games are either unavailable, fail to convey procedural knowledge or lack technical depth. Thus, we identify potential areas of improvement for games suitable for end-users in informal learning contexts.
Y1  - 2020
SN  - 978-3-030-62433-0
U6  - http://dx.doi.org/10.1007/978-3-030-62433-0_32020
N1  - Lecture Notes in Computer Science, vol 12512
SP  - 41
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Rendon, Carlos
A1  - Schwager, Christian
A1  - Ghiasi, Mona
A1  - Schmitz, Pascal
A1  - Bohang, Fakhri
A1  - Caminos, Ricardo Alexander Chico
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Modeling and upscaling of a pilot bayonettube reactor for indirect solar mixed methane reforming
T2  - AIP Conference Proceedings
Y1  - 2020
U6  - http://dx.doi.org/10.1063/5.0029974
IS  - 2303
SP  - 170012-1
EP  - 170012-9
ER  -