TY  - CHAP
A1  - Tymecki, Lukasz
A1  - Glab, Stanislaw
A1  - Koncki, Robert
T1  - Miniaturized, planar ion-selective electrodes fabricated by means of thick-film  technology
N2  - Various planar technologies are employed for developing solid-state sensors having low cost, small size and high reproducibility; thin- and thick-film technologies are most suitable for such productions. Screen-printing is especially suitable due to its simplicity, low-cost, high reproducibility and efficiency in large-scale production. This technology enables the deposition of a thick layer and allows precise pattern control. Moreover, this is a highly economic technology, saving large amounts of the used inks. In the course of repetitions of the film-deposition procedure there is no waste of material due to additivity of this thick-film technology. Finally, the thick films can be easily and quickly deposited on inexpensive substrates. In this contribution, thick-film ion-selective electrodes based on ionophores as well as crystalline ion-selective materials dedicated for potentiometric measurements are demonstrated. Analytical parameters of these sensors are comparable with those reported for conventional potentiometric electrodes. All mentioned thick-film strip electrodes have been totally fabricated in only one, fully automated thickfilm technology, without any additional manual, chemical or electrochemical steps. In all cases simple, inexpensive, commercially available materials, i.e. flexible, plastic substrates and easily cured polymer-based pastes were used.
KW  - Biosensor
KW  - Potentiometry
KW  - thick-film technology
KW  - screen-printing
KW  - ion-selective electrodes
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1506
ER  - 
TY  - CHAP
A1  - Kraft, Bodo
A1  - Retkowitz, Daniel
T1  - Rule-Dependencies for Visual Knowledge Specification in Conceptual Design
N2  - In: Proc. of the 11th Intl. Conf. on Computing in Civil and Building Engineering (ICCCBE-XI) ed. Hugues Rivard, Montreal, Canada, Seite 1-12, ACSE (CD-ROM), 2006 Currently, the conceptual design phase is not adequately supported by any CAD tool. Neither the support while elaborating conceptual sketches, nor the automatic proof of correctness with respect to effective restrictions is currently provided by any commercial tool. To enable domain experts to store the common as well as their personal domain knowledge, we develop a visual language for knowledge formalization. In this paper, a major extension to the already existing concepts is introduced. The possibility to define rule dependencies extends the expressiveness of the knowledge definition language and contributes to the usability of our approach.
KW  - CAD
KW  - CAD
KW  - Bauingenieurwesen
KW  - CAD
KW  - civil engineering
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Staat, Manfred
T1  - Problems and chances for probabilistic fracture mechanics in the analysis of steel pressure boundary reliability. - Überarb. Ausg.
N2  - In: Technical feasibility and reliability of passive safety systems for nuclear power plants. Proceedings of an Advisory Group Meeting held in Jülich, 21-24 November 1994. - Vienna , 1996. - Seite: 43 - 55 IAEA-TECDOC-920 Abstract: It is shown that the difficulty for probabilistic fracture mechanics (PFM) is the general problem of the high reliability of a small population. There is no way around the problem as yet. Therefore what PFM can contribute to the reliability of steel pressure boundaries is demon­strated with the example of a typical reactor pressure vessel and critically discussed. Although no method is distinguishable that could give exact failure probabilities, PFM has several addi­tional chances. Upper limits for failure probability may be obtained together with trends for design and operating conditions. Further, PFM can identify the most sensitive parameters, improved control of which would increase reliability. Thus PFM should play a vital role in the analysis of steel pressure boundaries despite all shortcomings.
KW  - Bruchmechanik
KW  - probabilistic fracture mechanics
KW  - PFM
Y1  - 2006
ER  - 
TY  - CHAP
A1  - Platen, Johannes
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Microstructured Nanostructures – nanostructuring by means of conventional photolithography and layer-expansion technique
N2  - A new and simple method for nanostructuring using conventional photolithography and layer expansion or pattern-size reduction technique is presented, which can further be applied for the fabrication of different nanostructures and nano-devices. The method is based on the conversion of a photolithographically patterned metal layer to a metal-oxide mask with improved pattern-size resolution using thermal oxidation. With this technique, the pattern size can be scaled down to several nanometer dimensions. The proposed method is experimentally demonstrated by preparing nanostructures with different configurations and layouts, like circles, rectangles, trapezoids, “fluidic-channel”-, “cantilever”- and meander-type structures.
KW  - Biosensor
KW  - Nanostructuring
KW  - layer expansion
KW  - pattern-size reduction
KW  - self-aligned patterning
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1477
ER  - 
TY  - CHAP
A1  - Poghossian, Arshak
A1  - Schumacher, Kerstin
A1  - Kloock, Joachim P.
A1  - Rosenkranz, Christian
A1  - Schultze, Joachim W.
A1  - Müller-Veggian, Mattea
A1  - Schöning, Michael Josef
T1  - Functional testing and characterisation of ISFETs on wafer level by means of a micro-droplet cell
N2  - A wafer-level functionality testing and characterisation system for ISFETs (ionsensitive field-effect transistor) is realised by means of integration of a specifically designed capillary electrochemical micro-droplet cell into a commercial wafer prober-station. The developed system allows the identification and selection of “good” ISFETs at the earliest stage and to avoid expensive bonding, encapsulation and packaging processes for nonfunctioning ISFETs and thus, to decrease costs, which are wasted for bad dies. The developed system is also feasible for wafer-level characterisation of ISFETs in terms of sensitivity, hysteresis and response time. Additionally, the system might be also utilised for wafer-level testing of further electrochemical sensors.
KW  - Biosensor
KW  - Biosensorik
KW  - ISFET
KW  - Wafer
KW  - ISFET
KW  - wafer-level testing
KW  - capillary micro-droplet cell
Y1  - 2006
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-1259
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Leadership Perspectives: Research Findings, Theories, Practical Experiences
N2  - Leadership Perspectives: Research Findings, Theories, Practical Experiences: Results of Leadership Research and exemplarily application cases show the perspectives and consequences for leadership practice and the following requirements for executives in future.
N2  - Leadership Perspectives: Research Findings, Theories, Practical Experiences: Bisherige Ergebnisse der betriebswirtschaftlichen Führungsforschung und exemplarische Anwendungsbeispiele der Führungspraxis, sowie die Schlußfolgerungen für die Perspektiven der betrieblichen Mitarbeiterführung sowie die sich daraus ergebenden Anforderungen an zukünftige Führungskräfte.
KW  - Leadership
KW  - Führung
KW  - Führungsansätze
KW  - Leadership
KW  - Self-Leadership
KW  - Leadership Approaches
KW  - Skill Assessment
KW  - Leadership Theories
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Motivation and Leadership - The Reiss-Profile of the 16 Basic Desires: Research results and managerial applications
N2  - Recent Results of the scientific Reiss-Profile (16 basic desires) due to the concept of Prof. Dr. Steven Reiss (State University Ohio, U.S.A.), supplemented by the comparative analysis of empirical motivational profiles of european executives of various companies.
N2  - Neuere Forschungsergebnisse des wissenschaftlichen Reiss-Profils der 16 Lebensmotive nach Prof. Dr. Steven Reiss (State University Ohio, U.S.A.) und die Möglichkeiten und Grenzen ihrer Umsetzung in der betrieblichen Führungspraxis unter Integration der vergleichenden Analyse und Interpretation empirisch erhobener Motivprofile einzelner europäischer Führungskräfte.
KW  - Motivation
KW  - Leadership
KW  - Motivation
KW  - Führung
KW  - Motivation
KW  - Leadership
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Weßling, Matthias
T1  - Provocative Communication in Coaching and Leadership: scientific research and managerial applications of the Provocative Communication Style
N2  - Concept, scientific research and managerial applications of Provocative Coaching, according to the „Provocative Therapy“ of Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) in terms of an application of the Provocative Communication Style in specific situations of practical leadership, especially in the role of a coach for their subordinates.
N2  - Konzept, Forschungsergebnisse und Tools der sogenannten „Provocative Therapy“ nach Prof. Dr. Frank Farrelly (University of Wisconsin, U.S.A) und ihre Anwendung als provokativer Kommunikationsstil einer Führungskraft in spezifischen Situationen der betrieblichen Führungspraxis in der Rolle eines Coaches.
KW  - Kommunikation
KW  - Coaching
KW  - Führung
KW  - Kommunikation
KW  - Coaching
KW  - Führung
KW  - Provokativer Stil
KW  - Provocative Coaching
KW  - Leadership
KW  - Communication
KW  - Provocative Style
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - 10 years of liberalised telecom markets in Germany: Assessing the degree of competition on the markets for voice telephony
N2  - Market data for the German telecom market shows that Deutsche Telekom as the former incumbent is constantly loosing shares on all arkets for voice telephony: the market for local calls, the market for long-distance calls and the market for international calls. At the same time prices decline steadily with the latest trend being that operators offer voice services free of charge, the costs of which are covered by a monthly subscription charge. Against this background the paper examines the state of policy and regulatory reform in the telecommunications sector in Germany almost 10 years after the liberalisation of the fixed telecommunications market. Thereby the focus is on the analysis of the competitive conditions that have been established on the German market for voice telephony services. If these retail markets are competitive, there might be a need to remove remaining regulatory provisions. In the new environment of converging markets the future challenge of regulating fixed telecom markets might be to ensure that access to the network and/or services of a potentially dominant provider in a relevant market will satisfy requirements for openness and non-discrimination.
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2007
N1  - paper presented at 18th European Regional ITS Conference of the International Telecommunications Society, September 2-4, 2007 Istanbul, Turkey
ER  - 
TY  - CHAP
A1  - Schleser, Markus
A1  - Dilthey, Ulrich
A1  - Mund, F.
A1  - Böhm, Stefan
ED  - Czarnecki, Lech
ED  - Garbacz, Andrzej
T1  - Improvement of textile reinforced concrete by use of polymers
T2  - Adhesion in interfaces of building materials: a multi-scale approach : [Symposium "Adhesion in Building Bonds: Macro-, Micro- and Nano-Scale" at Warsaw University of Technology in the framework of the European Materials Research Society, fall meeting 2005 ; selected papers]. (Advances in materials science and restoration. No. 2)
Y1  - 2007
SN  - 978-3-931681-89-0
SP  - 153
EP  - 162
PB  - Aedificatio Publ.
CY  - Freiburg
ER  - 
TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Puterman, Moshe
T1  - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics
T2  - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007
Y1  - 2007
SN  - 978-89-9600450-9
SP  - 725
EP  - 733
PB  - Kangwoon National Univ.
CY  - Chancheon
ER  - 
TY  - CHAP
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zerlin, Kay
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Zaccai, Joe
A1  - Büldt, Georg
T1  - Temperature transitions of hemoglobin and cytosolic water diffusion in human red blood cells : [poster]
N2  - Background Hemoglobin interactions in red blood cells Hemoglobin dynamics in human red blood cells Diffusion of H2O in red blood cells
KW  - Erythrozyt
KW  - Hämoglobin
KW  - cytosolic water diffusion
KW  - hemoglobin dynamics
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Finite element shakedown and limit reliability analysis of thin shells
N2  - A procedure for the evaluation of the failure probability of elastic-plastic thin shell structures is presented. The procedure involves a deterministic limit and shakedown analysis for each probabilistic iteration which is based on the kinematical approach and the use the exact Ilyushin yield surface. Based on a direct definition of the limit state function, the non-linear problems may be efficiently solved by using the First and Second Order Reliabiblity Methods (Form/SORM). This direct approach reduces considerably the necessary knowledge of uncertain technological input data, computing costs and the numerical error. In: Computational plasticity / ed. by Eugenio Onate. Dordrecht: Springer 2007. VII, 265 S. (Computational Methods in Applied Sciences ; 7) (COMPLAS IX. Part 1 . International Center for Numerical Methods in Engineering (CIMNE)). ISBN 978-1-402-06576-7  S. 186-189
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - shakedown analysis
KW  - Exact Ilyushin yield surface
KW  - Random variable
KW  - First Order Reliabiblity Method
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
A1  - Kreißig, R.
T1  - Calculation of load carrying capacity of shell structures with elasto-plastic material by direct methods
N2  - Proceedings of the International Conference on Material Theory and Nonlinear Dynamics. MatDyn. Hanoi, Vietnam, Sept. 24-26, 2007, 8 p. In this paper, a method is introduced to determine the limit load of general shells using the finite element method. The method is based on an upper bound limit and shakedown analysis with elastic-perfectly plastic material model. A non-linear constrained optimisation problem is solved by using Newton’s method in conjunction with a penalty method and the Lagrangean dual method. Numerical investigation of a pipe bend subjected to bending moments proves the effectiveness of the algorithm.
KW  - Finite-Elemente-Methode
Y1  - 2007
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Time for revision: The regulation of Germany's next generation networks in the light of new economic and technological challenges on telecom markets : Presentation for the 18th Biennial conference of the International Telecommunications Society, June 24–27, 2008 Montreal, Canada
N2  - On 1st January 1998, the German telecom market was fully liberalised. Since then genuine competition between market participants has developed, based on a comprehensive legal and regulatory framework that provides for safeguards against unfair competition and market power by Deutsche Telekom. Today, about 10 years after the liberalisation of the telecommunications sector a revision of this regulatory approach has become necessary because at least on three dimensions the situation is quite different from the one 10 years ago: First, with numerous established alternative operators in the market monopolies have been successfully challenged and competition introduced. Second, not only is Cable TV becoming in large parts of Germany a viable alternative for the provision of broadband services but also mobile services are becoming increasingly a substitute for fixed services. Last but not least there are important technological changes under way, requiring huge investments in infrastructure upgrades for next generation networks. In the light of these new developments the question is to which extent the current regulatory approach of severe ex-ante regulatory intervention is still appropriate. Is any part of the network of the former incumbent still a bottleneck? A more light handed regulatory approach might be the right response to this new situation. The paper is organised as follows: The first section will briefly examine the economic rationale for regulating network access. Based on the assumption that regulation is always necessary when bottlenecks exist regulatory principles for an efficient network access regime will be derived. The second section compares the situation of the German market in early 1998 with the one of today. Thereby three dimensions will be considered: the degree of competition, the potential for substitution and technological developments. The third section will define some requirements for the future regulation of telecom markets. Proposals will be elaborated how to ensure competitive telecom markets in the light of new economic and technological challenges.
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
A1  - Haunert, Martina
T1  - Assessing the effectiveness of price cap regimes for the regulation of fixed telephony markets: has it been successful in achieving competition? : preliminary draft / by Markus Fredebeul-Krein and Martina Haunert. 19th European Regional ITS Conference of the International Telecommunications Society, September 17–19, 2008 Rome, Italy
N2  - 1. Introduction 2. Tariff regulation, rebalancing and price caps 3. Price cap regimes in selected European countries 4. Has price cap regulation been successful? 5. Regulatory implications for other countries
KW  - Telekommunikationsmarkt
KW  - Telekommunikationsmarkt
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Staat, Manfred
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
T1  - Limit and shakedown reliability analysis by nonlinear programming
N2  - 7th International Conference on Reliability of Materials and Structures (RELMAS 2008). June 17 - 20, 2008 ; Saint Petersburg, Russia. pp 354-358. Reprint with corrections in red Introduction Analysis of advanced structures working under extreme heavy loading such as nuclear power plants and piping system should take into account the randomness of loading, geometrical and material parameters. The existing reliability are restricted mostly to the elastic working regime, e.g. allowable local stresses. Development of the limit and shakedown reliability-based analysis and design methods, exploiting potential of the shakedown working regime, is highly needed. In this paper the application of a new algorithm of probabilistic limit and shakedown analysis for shell structures is presented, in which the loading and strength of the material as well as the thickness of the shell are considered as random variables. The reliability analysis problems may be efficiently solved by using a system combining the available FE codes, a deterministic limit and shakedown analysis, and the First and Second Order Reliability Methods (FORM/SORM). Non-linear sensitivity analyses are obtained directly from the solution of the deterministic problem without extra computational costs.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Staat, Manfred
T1  - Reliability analysis of shells based on direct plasticity methods
N2  - Abstracts der CD-Rom Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) 30.06. - 04.07.2008 Venedig, Italien. 2 Seiten Zusammenfassung der Autoren mit graph. Darst. und Literaturverzeichnis
N2  - Abstracts of the Proceedings of the 8th World Congress on Computational Mechanics (WCCM8) and 5th Congress on Computational Methods in Applied Sciences and Engineering (ECCOMAS 2008) June 30th - July, 4th 2008, Venice, Italy. 2 pages with abstracts of the authors, Ill. and references.
KW  - Finite-Elemente-Methode
KW  - Limit analysis
KW  - Shakedown analysis
KW  - First-order reliability method
KW  - second-order reliability method
KW  - Sensitivity
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Mansurov, Zulkhair
A1  - Zhubanova, Azhar A.
A1  - Digel, Ilya
A1  - Artmann, Gerhard
A1  - Temiz Artmann, Aysegül
A1  - Savitskaja, Irina S.
A1  - Kozhalakova, A. A.
A1  - Kistaubaeva, Aida S.
T1  - The sorption of LPS toxic shock by nanoparticles on base of carbonized vegetable raw materials
N2  - Immobilization of lactobacillus on high temperature carbonizated vegetable raw material (rice husk, grape stones) increases their physiological activity and the quantity of the antibacterial metabolits, that consequently lead to increase of the antagonistic activity of lactobacillus. It is implies that the use of the nanosorbents for the attachment of the probiotical microorganisms are highly perspective for decision the important problems, such as the probiotical preparations delivery to the right address and their attachment to intestines mucosa with the following detoxication of gastro-intestinal tract and the normalization of it’s microecology. Besides that, thus, the received carbonizated nanoparticles have peculiar properties – ability to sorption of LPS toxical shock and, hence, to the detoxication of LPS.
KW  - Kohlenstofffaser
KW  - Lipopolysaccharide
KW  - nanostrukturierte carbonisierte Pflanzenteile
KW  - lipopolysaccharides
KW  - nanostructured carbonized plant parts
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Gellert, Christoph
A1  - Norda, Hannah
A1  - Butenweg, Christoph
T1  - Nonlinear behaviour of masonry under cyclic loading
T2  - 7th European Conference on Structural Dynamics, EURODYN 2008 : 7-9 July 2008, Southampton
Y1  - 2008
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Dikta, Gerhard
T1  - Probability of damage of electrical and electronic systems due to indirect lightning flashes - investigation of data from German insurance companies
N2  - In the presented paper data collected from the field related to damage statistics of electrical and electronic apparatus in household are reported and investigated. These damages (total number approx. 74000 cases), registered by five German insurance companies in 2005 and 2006, were adviced by customers as caused by lightning overvoltages. With the use of stochastical methods it is possible, to reasses the collected data and to distinguish between cases, which are with high probability caused by lightning overvoltages, and those, which are not. If there was an indication for a direct strike, this case was excluded, so the focus was only on indirect lightning flashes, i.e. only flashes to ground near the structure and flashes to or nearby an incoming service line were investigated. The data from the field contain the location of damaged apparatus (residence of the policy holder) and the distances of the nearest cloud-to-ground stroke to the location of the damage registered by the German lightning location network BLIDS at the date of damage. The statistical data along with some complementary numerical simulations allow to verify the correspondence of the Standards rules used for IEC 62305-2 with the field data and to define some correction needs. The results could lead to a better understanding whether a damage reported to an insurance company is really caused by indirect lightning, or not.
KW  - Blitzschutz
KW  - lightning flash
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Advancements in Nanotechnology and Microelectronics (ANM '09) <2009, Tunisia>: Proceedings book ; Tunisia, November, 13 & 14, 2009 / Humboldt Kolleg. Ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - The ANM’09 multi-disciplinary scientific program includes topics in the fields of "Nanotechnology and Microelectronics" ranging from "Bio/Micro/Nano Materials and Interfacing" aspects, "Chemical and Bio-Sensors", "Magnetic and Superconducting Devices", "MEMS and Microfluidics" over "Theoretical Aspects, Methods and Modelling" up to the important bridging "Academics meet Industry".
KW  - Nanopartikel
KW  - Biosensor
KW  - Supraleiter
KW  - MEMS
KW  - Biophoton
KW  - Nanotechnology ; Microelectronics ; Biosensors ; Superconductor ; MEMS
Y1  - 2009
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3113
ER  - 
TY  - CHAP
A1  - Fredebeul-Krein, Markus
T1  - Encouraging competition and investment into next generation access networks: The case of long term risk sharing contracts
N2  - Working paper distributed at 2nd Annual Next Generation Telecommunications Conference 2009, 13th – 14th October 2009, Brussels 14 pages Abstract Governments all over Europe are in the process of adopting new broadband strategies. The objective is to create modern telecommunications networks based on powerful broadband infrastructures". In doing so, they aim for innovative and investment-friendly concepts. For instance, in a recently published consultation paper on the subject the German regulator BNetzA declared that it will take “greater account of … reducing risks, securing the investment and innovation power, providing planning certainty and transparency – in order to support and advance broadband rollout in Germany”. It further states that when regulating wholesale rates it has to be ensured that “… adequate incentives for network rollout are provided on the one hand, while sustainable and fair competition is ensured on the other”. Also an EC draft recommendation on regulated network access is about to set new standards for the regulation of next generation access networks. According to the recommendation the prices of new assets shall be based on costs plus a projectspecific risk premium to be included in the costs of capital for the investment risk incurred by the operator. This approach has been criticised from various sides. In particular it has been questioned whether such an approach is adequate to meet the objectives of encouraging both competition and investment into next generation access networks. Against this background, the concept of “long term risk sharing contracts” has been proposed recently as an approach which does not only incorporate the various additional risks involved in the deployment of NGA infrastructure, but has several other advantages. This paper will demonstrate that the concept allows for competition to evolve at both the retail and wholesale level on fair, objective, non-discriminatory and transparent terms and conditions. Moreover, it ensures the highest possible investment incentive in line with socially desirable outcome. The paper is organised as follows: The next section will briefly outline the importance of encouraging competition and investment in an NGA-environment. The third section will specify the design of long term risk sharing contracts in view of achieving these objectives. The fourth section will examine potential problems associated with the concept. In doing so a way of how to deal with them will be elaborated. The last section will look at arguments against long term risk sharing contracts. It will be shown that these arguments are not strong enough to build a case against introducing such contracts.
KW  - Electronic Commerce
KW  - Breitband Markt
KW  - Regulierung
KW  - Internet
KW  - Bundesnetzagentur
KW  - broadband market
KW  - regulation
KW  - Internet
KW  - next generation access networks
KW  - risk sharing
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Gries, Thomas
A1  - Glowania, Michael
T1  - Impregnated textile reinforcements for concrete applications
T2  - European Coatings Congress : Nürnberg, Germany, 30.3. - 1.4. 2009
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Arinkin, Vladimir
A1  - Digel, Ilya
T1  - Water bridge phenomenon : [abstract]
N2  - One of interesting but not well known water properties is related to appearance of highly ordered structures in response to strong electrical field. In 1893 Sir William Armstrong placed a cotton thread between two wine glasses filled with chemically pure water. When high DC voltage was applied between the glasses, a connection consisting of water formed, producing a "water bridge"
KW  - Hydrodynamik
KW  - Elektrodynamik
KW  - Wasserbrücke
KW  - water bridge phenomenon
Y1  - 2009
ER  - 
TY  - CHAP
A1  - O\'Heras, Carlos
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - Nanostructured carbon-based column for LPS/protein adsorption : [abstract]
N2  - The absence of a general method for endotoxin removal from liquid interfaces gives an opportunity to find new methods and materials to overcome this gap. Activated nanostructured carbon is a promising material that showed good adsorption properties due to its vast pore network and high surface area. The aim of this study is to find the adsorption rates for a carboneous material produced at different temperatures, as well as to reveal possible differences between the performance of the material for each of the adsorbates used during the study (hemoglobin, serum albumin and lipopolysaccharide, LPS).
KW  - Kohlenstofffaser
KW  - Adsorption
KW  - Lipopolysaccharide
KW  - aktivierte nanostrukturierte Kohlenstofffaser
KW  - lipopolysaccharides
KW  - activated nanostructured carbon
Y1  - 2009
ER  - 
TY  - CHAP
A1  - ElBashir, Rasha
A1  - Digel, Ilya
T1  - Effect of nitric oxide gas on hydrogels : [abstract]
N2  - The results support our theory that the NO gas has an influence in increasing the translational diffusion of hydrogels and it accelerates the melting process of the gels.
KW  - Stickstoffmonoxid
KW  - Hydrogel
KW  - nitric oxide gas
KW  - hydrogel
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Bassam, Rasha
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Effect of nitric oxide on protein thermal stability : [abstract]
N2  - As a deduction from these results, we can conclude that proteins mainly in vitro, denaturate totally at a temperature between 57°C -62°C, and they also affected by NO and different ions types. In which mainly, NO cause earlier protein denaturation, which means that, NO has a destabilizing effect on proteins, and also different ions will alter the protein denaturation in which, some ions will cause earlier protein denaturation while others not.
KW  - Stickstoffmonoxid
KW  - Proteine
KW  - Hämoglobin
KW  - nitric oxide gas
KW  - protein
KW  - hemoglobin
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Dachwald, Bernd
A1  - Artmann, Gerhard
A1  - Linder, Peter
A1  - Funke, O.
T1  - A concept of a probe for particle analysis and life detection in icy environments
N2  - A melting probe equipped with autofluorescence-based detection system combined with a light scattering unit, and, optionally, with a microarray chip would be ideally suited to probe icy environments like Europa’s ice layer as well as the polar ice layers of Earth and Mars for recent and extinct live.
KW  - Sonde
KW  - Eisschicht
KW  - Autofluoreszenzverfahren
KW  - Lichtstreuungsbasierte Instrumente
KW  - autofluorescence-based detection system
KW  - light scattering analysis
Y1  - 2009
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
ED  - Cecotti, A.
T1  - Determining Suitable Spacings and Distances for Self-tapping Screws by Experimental and Numerical Studies
T2  - Proceedings of the 11th World Conference on Timber Engineering, WCTE 2010 : World Conference on Timber Engineering; [June 20 - 24, 2010, Riva del Garda, Trento, Italy] . Vol. III, Riva del Garda, Italy 2010
Y1  - 2010
N1  - Extended abstract. Full paper: DVD, Session 55, ID 108, 9 Seiten
SP  - 669
EP  - 670
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Stadler, Andreas M.
A1  - Embs, Jan P.
A1  - Zaccai, Giuseppe
A1  - Büldt, Georg
A1  - Digel, Ilya
A1  - Temiz Artmann, Aysegül
T1  - The crucial role of water in a phase transition of hemoglobin at body temperature : [abstract]
N2  - The observation of a temperature transition of hemoglobin occurring at a critical temperature close to body temperature
KW  - Hämoglobin
KW  - Erythrozyt
KW  - Körpertemperatur
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Digel, Ilya
A1  - Leimena, W.
A1  - Dachwald, Bernd
A1  - Linder, Peter
A1  - Porst, Dariusz
A1  - Kayser, Peter
A1  - Funke, O.
A1  - Temiz Artmann, Aysegül
A1  - Artmann, Gerhard
T1  - In-situ biological decontamination of an ice melting probe : [abstract]
N2  - The objective of our study was to investigate the efficacy of different in-situ decontamination protocols in the conditions of thermo-mechanical ice-melting.
KW  - Sonde
KW  - Dekontamination
KW  - Wasserstoffperoxid
KW  - Natriumhypochlorit
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Kurulgan Demirci, Eylem
A1  - Linder, Peter
A1  - Demirci, Taylan
A1  - Gierkowski, Jessica R.
A1  - Digel, Ilya
A1  - Gossmann, Matthias
A1  - Temiz Artmann, Aysegül
T1  - rhAPC reduces the endothelial cell permeability via a decrease of cellular mechanical contractile tensions : [abstract]
N2  - In this study, the CellDrum technology quanitfying cellular mechanical tension on a pico-scale was used to investigate the effect of LPS (lipopolysaccharide) on HAoEC (Human Aortic Endothelial Cell) tension.
KW  - Endothelzelle
KW  - Sepsis
KW  - kontraktile Spannung
KW  - rhAPC
KW  - contractile tension
KW  - rhAPC
KW  - celldrum technology
Y1  - 2010
ER  - 
TY  - CHAP
A1  - Uibel, Thomas
A1  - Blaß, Hans Joachim
T1  - A new method to determine suitable spacings and distances for self-tapping screws
T2  - Meeting ... / International Council for Research and Innovation in Building and Construction, Working Commission W18 - Timber Structures
N2  - The determination of spacing, edge and end distance requirements for self-tapping screws requires numerous and comprehensive insertion tests. Yet the results of such tests cannot be transferred to other types of screws or even to screws of different diameter because of differences in shape or geometry. To reduce the effort of insertion tests a new method was developed which allows the estimation of required spacings, distances and timber thickness.
Y1  - 2010
SN  - 1864-1784
N1  - Paper 43-21-2
VL  - 43
PB  - Lehrstuhl für Ingenieurholzbau und Baukonstruktionen
CY  - Karlsruhe
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Novacek, V.
A1  - Tolba, R.
A1  - Klinge, U.
A1  - Turquier, F.
A1  - Staat, Manfred
T1  - Experimental and Computational approach to study colorectal anastomosis. ISB2011, Proceedings of the XXIII Congress of the International Society of Biomechanics, Brussels, Belgium, July 3-7, 2011
N2  - Summary: This paper presents a methodology to study and understand the mechanics of stapled anastomotic behaviors by combining empirical experimentation and finite element analysis. Performance of stapled anastomosis is studied in terms of leakage and numerical results which are compared to in vitro experiments performed on fresh porcine tissue. Results suggest that leaks occur between the tissue and staple legs penetrating through the tissue.
KW  - Anastomose
KW  - Finite-Elemente-Methode
KW  - Biomechanik
KW  - Anastomosis
KW  - Finite element method
KW  - Biomechanics
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Xu, Changsheng
A1  - Feldmann, Marco
A1  - Plescher, Engelbert
A1  - Digel, Ilya
A1  - Artmann, Gerhard
T1  - Development and testing of a subsurface probe for detection of life in deep ice : [abstract]
N2  - We present the novel concept of a combined drilling and melting probe for subsurface ice research. This probe, named “IceMole”, is currently developed, built, and tested at the FH Aachen University of Applied Sciences’ Astronautical Laboratory. Here, we describe its first prototype design and report the results of its field tests on the Swiss Morteratsch glacier. Although the IceMole design is currently adapted to terrestrial glaciers and ice shields, it may later be modified for the subsurface in-situ investigation of extraterrestrial ice, e.g., on Mars, Europa, and Enceladus. If life exists on those bodies, it may be present in the ice (as life can also be found in the deep ice of Earth).
KW  - Eisschicht
KW  - Sonde
KW  - subsurface probe
KW  - subsurface ice research
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Artmann, Gerhard
A1  - Digel, Ilya
A1  - Linder, Peter
A1  - Temiz Artmann, Aysegül
T1  - Biophysical and Engineering Contributions to Plant Research
N2  - Tests with palm tree leaves have just started yet and scan data are in the process to be analyzed. The final goal of future project for palm tree gender and species recognition will be to develop optical scanning technology to be applied to date palm tree leaves for in–situ screening purposes. Depending on the software used and the particular requirements of the users the technology potentially shall be able to identify palm tree diseases, palm tree gender, and species of young date palm trees by scanning leaves.
KW  - Pflanzenphysiologie
KW  - Dattel
KW  - Pflanzenscanner
KW  - plant scanner
KW  - date palm tree
Y1  - 2011
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Abdelghani, Adnane
T1  - Nanoscale Science and Technology (NS&T’12) : Proceedings Book Humboldt Kolleg <2012, Tunisia>  ; Tunisia, 17-19 March, 2012 / ed. by Michael J. Schöning ; Adnane Abdelghani
N2  - Proceedings of the 2nd Humboldt Kolleg, Hammamet, Tunisia Organizer: Alexander von Humboldt Stiftung, Germany. pdf 184 p. Welcome Address Dear Participants, Welcome to the 2nd Humboldt Kolleg in “Nanoscale Science and Technology” (NS&T’12) in Tunisia, sponsored by the "Alexander von Humboldt" foundation. The NS&T’12 multidisciplinary scientific program includes seven "hot" topics dealing with "Nanoscale Science and Technology" covering basic and application-oriented research as well as industrial (market) aspects: - Molecular Biophyics, Spectroscopy Techniques, Imaging Microscopy - Nanomaterials Synthesis for Medicine and Bio-chemical Sensors - Nanostructures, Semiconductors, Photonics and Nanodevices - New Technologies in Market Industry - Environment, Electro-chemistry, Bio-polymers and Fuel Cells - Nanomaterials, Photovoltaic, Modelling, Quantum Physics - Microelectronics, Sensors Networks and Embedded Systems We are deeply indebted to all members of the Scientific Committee and General Chairs for joint Sessions and to all speakers and chairmen, who have dedicated invaluable time and efforts for the realization of this event. On behalf of the Organizing Committee, we are cordially inviting you to join the conference and hope that your stay will be fruitful, rewarding and enjoyable. Prof. Dr. Michael J. Schöning, Prof. Dr. Adnane Abdelghani
KW  - Biosensor
KW  - Nanotechnologie
KW  - Nanomaterial
KW  - Nano Materials
KW  - Bio-Sensors
Y1  - 2012
U6  - http://nbn-resolving.de/urn/resolver.pl?urn:nbn:de:hbz:a96-opus-3544
ER  - 
TY  - CHAP
A1  - Dachwald, Bernd
A1  - Mikucki, Jill A.
A1  - Tulaczyk, Slawek
A1  - Digel, Ilya
A1  - Feldmann, Marco
A1  - Espe, Clemens
A1  - Plescher, Engelbert
A1  - Xu, Changsheng
T1  - IceMole - a maneuverable probe for clean in-situ analysis and sampling of subsurface ice and subglacial aquatic ecosystems : extended abstract / SCAR Open Science Conference 2012, Session 29: Advancing Clean Technologies for Exploration of Glacial Aquatic Ecosystems
N2  - The ”IceMole“ is a novel maneuverable subsurface ice probe for clean in-situ analysis and sampling of subsurface ice and subglacial water/brine. It is developed and build at FH Aachen University of Applied Sciences’ Astronautical Laboratory. A first prototype was successfully tested on the Swiss Morteratsch glacier in 2010. Clean sampling is achieved with a hollow ice screw (as it is used in mountaineering) at the tip of the probe. Maneuverability is achieved with a differentially heated melting head. Funded by the German Space Agency (DLR), a consortium led by FH Aachen currently develops a much more advanced IceMole probe, which includes a sophisticated system for obstacle avoidance, target detection, and navigation in the ice. We intend to use this probe for taking clean samples of subglacial brine at the Blood Falls (McMurdo Dry Valleys, East Antarctica) for chemical and microbiological analysis. In our conference contribution, we 1) describe the IceMole design, 2) report the results of the field tests of the first prototype on the Morteratsch glacier, 3) discuss the probe’s potential for the clean in-situ analysis and sampling of subsurface ice and subglacial liquids, and 4) outline the way ahead in the development of this technology.
KW  - Eisschicht
KW  - Sonde
KW  - subsurface ice
KW  - subglacial aquatic ecosystems
Y1  - 2012
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Rosin, Julia
A1  - Kubalski, Thomas
T1  - Seismic response of conventional and base-isolated liquid storage tanks
T2  - International Conference on Earthquake Engineering : 29.-31.05.2013, Skopje, Mazedonien
Y1  - 2013
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Butenweg, Christoph
A1  - Kleemann, Anne
A1  - Altay, Okyay
A1  - Renault, Philippe
T1  - Simulation of impact-loads on reinforced concrete structural elements
T2  - 22nd International Conference on Structural Mechanics in Reactor Technology 2013 : (SMiRT 22) ; San Francisco, California, USA, 18 - 23 August 2013
Y1  - 2013
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Duong, Minh Tuan
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A face-based smoothed finite element method for hyperelastic models and tissue growth
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Tran, Ngoc Trinh
A1  - Staat, Manfred
A1  - Stavroulakis, G. E.
ED  - Onate, E.
T1  - A multicriteria method for truss optimization
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Frotscher, Ralf
A1  - Koch, Jan-Peter
A1  - Raatschen, Hans-Jürgen
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Evaluation of a computational model for drug action on cardiac tissue
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Bhattarai, Aroj
A1  - Frotscher, Ralf
A1  - Sora, M.-C.
A1  - Staat, Manfred
ED  - Onate, E.
T1  - A 3D finite element model of the female pelvic floor for the reconstruction of urinary incontinence
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
ED  - Onate, E.
T1  - Optimization of the flight style in ski jumping
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20 - 25, 2014, Barcelona
Y1  - 2014
N1  - Das Paper wurde nach der Konferenz überarbeitet.
SP  - 799
EP  - 810
ER  - 
TY  - CHAP
A1  - Tran, Thanh Ngoc
A1  - Staat, Manfred
ED  - Onate, E.
T1  - Uncertain multimode failure and limit analysis of shells
T2  - 11th World Congress on Computational Mechanics (WCCM XI) ; 5th European Conference on Computational Mechanics (ECCM V) ; 6th European Conference on Computational Fluid Dynamics (ECFD VI) ; July 20-25, 2014, Barcelona
Y1  - 2014
SP  - 1
EP  - 12
ER  - 
TY  - CHAP
A1  - Bung, Daniel Bernhard
T1  - Observations on non-aerated flow and air entrainment on moderately sloped stepped spillways
T2  - 7th Chinese-German Joint Symposium on Hydraulic and Ocean Engineering : 8. - 12. Sept. 2014, Hannover
Y1  - 2014
N1  - Kennwortgeschützter Zugang. Passwort bei Prof. Bung, Fachbereich Bauingenieurwesen
SP  - 1
EP  - 8
ER  - 
TY  - CHAP
A1  - Bonney, Gregor
A1  - Höfken, Hans-Wilhelm
A1  - Paffen, Benedikt
A1  - Schuba, Marko
T1  - ICS/SCADA Security - Analysis of a Beckhoff CX5020 PLC
T2  - 1st International Conference on Information Systems Security and Privacy : ICISSP 2015
Y1  - 2015
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Gregorio, Fabrizio de
A1  - Fatigati, Giovanni
A1  - Kallweit, Stephan
T1  - Tiltrotor airframe flow field characterization by SPIV
T2  - 11th International Symposium on Partivle Image Velocimetry - PIV15 , Santa Barbara, California, Sept 14-16, 2015
Y1  - 2015
ER  -