TY  - CHAP
A1  - Chajan, Eduard
A1  - Schulte-Tigges, Joschua
A1  - Reke, Michael
A1  - Ferrein, Alexander
A1  - Matheis, Dominik
A1  - Walter, Thomas
T1  - GPU based model-predictive path control for self-driving vehicles
T2  - IEEE Intelligent Vehicles Symposium (IV)
N2  - One central challenge for self-driving cars is a proper path-planning. Once a trajectory has been found, the next challenge is to accurately and safely follow the precalculated path. The model-predictive controller (MPC) is a common approach for the lateral control of autonomous vehicles. The MPC uses a vehicle dynamics model to predict the future states of the vehicle for a given prediction horizon. However, in order to achieve real-time path control, the computational load is usually large, which leads to short prediction horizons. To deal with the computational load, the control algorithm can be parallelized on the graphics processing unit (GPU). In contrast to the widely used stochastic methods, in this paper we propose a deterministic approach based on grid search. Our approach focuses on systematically discovering the search area with different levels of granularity. To achieve this, we split the optimization algorithm into multiple iterations. The best sequence of each iteration is then used as an initial solution to the next iteration. The granularity increases, resulting in smooth and predictable steering angle sequences. We present a novel GPU-based algorithm and show its accuracy and realtime abilities with a number of real-world experiments.
KW  - Heuristic algorithms
KW  - Computational modeling
KW  - model-predictive control
KW  - GPU
KW  - autonomous driving
Y1  - 2021
SN  - 978-1-7281-5394-0
U6  - http://dx.doi.org/10.1109/IV48863.2021.9575619
N1  - 2021 IEEE Intelligent Vehicles Symposium (IV)
July 11-17, 2021. Nagoya, Japan
SP  - 1243
EP  - 1248
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Hüning, Felix
A1  - Wache, Franz-Josef
A1  - Magiera, David
T1  - Redundant bus systems using dual-mode radio
T2  - Proceedings of Sixth International Congress on Information and Communication Technology
N2  - Communication via serial bus systems, like CAN, plays an important role for all kinds of embedded electronic and mechatronic systems. To cope up with the requirements for functional safety of safety-critical applications, there is a need to enhance the safety features of the communication systems. One measure to achieve a more robust communication is to add redundant data transmission path to the applications. In general, the communication of real-time embedded systems like automotive applications is tethered, and the redundant data transmission lines are also tethered, increasing the size of the wiring harness and the weight of the system. A radio link is preferred as a redundant transmission line as it uses a complementary transmission medium compared to the wired solution and in addition reduces wiring harness size and weight. Standard wireless links like Wi-Fi or Bluetooth cannot meet the requirements for real-time capability with regard to bus communication. Using the new dual-mode radio enables a redundant transmission line meeting all requirements with regard to real-time capability, robustness and transparency for the data bus. In addition, it provides a complementary transmission medium with regard to commonly used tethered links. A CAN bus system is used to demonstrate the redundant data transfer via tethered and wireless CAN.
Y1  - 2021
SN  - 978-981-16-2379-0
SN  - 978-981-16-2380-6
U6  - http://dx.doi.org/10.1007/978-981-16-2380-6_73
N1  - Proceedings of Sixth International Congress on Information and Communication Technology, ICICT 2021, Brunel University, London, February 25–26, 2021
SP  - 835
EP  - 842
PB  - Springer
CY  - Singapore
ER  - 
TY  - CHAP
A1  - Hüning, Felix
A1  - Stüttgen, Marcel
T1  - Work in Progress: Interdisciplinary projects in times of COVID-19 crisis – challenges, risks and chances
T2  - 2021 IEEE Global Engineering Education Conference (EDUCON)
Y1  - 2021
U6  - http://dx.doi.org/10.1109/EDUCON46332.2021.9454006
SP  - 1175
EP  - 1179
ER  - 
TY  - CHAP
A1  - Hoegen, Anne von
A1  - Doncker, Rik W. De
A1  - Bragard, Michael
A1  - Hoegen, Svenja von
T1  - Problem-Based Learning in Automation Engineering: Performing a Remote Laboratory Session Serving Various Educational Attainments
T2  - 2021 IEEE Global Engineering Education Conference (EDUCON)
Y1  - 2021
U6  - http://dx.doi.org/10.1109/EDUCON46332.2021.9453925
SP  - 1605
EP  - 1614
ER  - 
TY  - CHAP
A1  - Ferrein, Alexander
A1  - Meeßen, Marcus
A1  - Limpert, Nicolas
A1  - Schiffer, Stefan
ED  - Lepuschitz, Wilfried
T1  - Compiling ROS Schooling Curricula via Contentual Taxonomies
T2  - Robotics in Education
Y1  - 2021
SN  - 978-3-030-67411-3
U6  - http://dx.doi.org/10.1007/978-3-030-67411-3_5
N1  - RiE: International Conference on Robotics in Education (RiE);
Advances in Intelligent Systems and Computing book series (AISC, volume 1316)
SP  - 49
EP  - 60
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Heuermann, Holger
A1  - Harzheim, Thomas
A1  - Mühmel, Marc
T1  - A maritime harmonic radar search and rescue system using passive and active tags
T2  - 2020 17th European Radar Conference (EuRAD)
KW  - Harmonic Radar
KW  - Rescue System
KW  - Frequency Doubler
KW  - Transponder
KW  - Tag
Y1  - 2021
SN  - 978-2-87487-061-3
U6  - http://dx.doi.org/10.1109/EuRAD48048.2021.00030
N1  - Proceedings of the 17th European Radar Conference, 
13th - 15th January 2021, Utrecht, Netherlands
SP  - 73
EP  - 76
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Hoegen, Anne von
A1  - Doncker, Rik W. De
A1  - Rütters, René
T1  - Teaching Digital Control of Operational Amplifier Processes with a LabVIEW Interface and Embedded Hardware
T2  - The 23rd International Conference on Electrical Machines and Systems (ICEMS), Hamamatsu, Japan
Y1  - 2020
U6  - http://dx.doi.org/10.23919/ICEMS50442.2020.9290928
SP  - 1117
EP  - 1122
ER  - 
TY  - CHAP
A1  - Hofmann, Till
A1  - Limpert, Nicolas
A1  - Mataré, Viktor
A1  - Ferrein, Alexander
A1  - Lakemeyer, Gerhard
T1  - Winning the RoboCup Logistics League with Fast Navigation, Precise Manipulation, and Robust Goal Reasoning
T2  - RoboCup 2019: Robot World Cup XXIII. RoboCup
Y1  - 2019
SN  - 978-3-030-35699-6
U6  - http://dx.doi.org/10.1007/978-3-030-35699-6_41
N1  - Lecture Notes in Computer Science, vol 11531
SP  - 504
EP  - 516
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Eltester, Niklas Sebastian
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - A smart factory setup based on the RoboCup logistics league
T2  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS)
N2  - In this paper we present SMART-FACTORY, a setup for a research and teaching facility in industrial robotics that is based on the RoboCup Logistics League. It is driven by the need for developing and applying solutions for digital production. Digitization receives constantly increasing attention in many areas, especially in industry. The common theme is to make things smart by using intelligent computer technology. Especially in the last decade there have been many attempts to improve existing processes in factories, for example, in production logistics, also with deploying cyber-physical systems. An initiative that explores challenges and opportunities for robots in such a setting is the RoboCup Logistics League. Since its foundation in 2012 it is an international effort for research and education in an intra-warehouse logistics scenario. During seven years of competition a lot of knowledge and experience regarding autonomous robots was gained. This knowledge and experience shall provide the basis for further research in challenges of future production. The focus of our SMART-FACTORY is to create a stimulating environment for research on logistics robotics, for teaching activities in computer science and electrical engineering programmes as well as for industrial users to study and explore the feasibility of future technologies. Building on a very successful history in the RoboCup Logistics League we aim to provide stakeholders with a dedicated facility oriented at their individual needs.
Y1  - 2020
U6  - http://dx.doi.org/10.1109/ICPS48405.2020.9274766
N1  - 2020 IEEE Conference on Industrial Cyberphysical Systems (ICPS), 10-12 June 2020, Tampere, Finland.
SP  - 297
EP  - 302
PB  - IEEE
ER  - 
TY  - CHAP
A1  - Kirsch, Maximilian
A1  - Mataré, Victor
A1  - Ferrein, Alexander
A1  - Schiffer, Stefan
T1  - Integrating golog++ and ROS for Practical and Portable High-level Control
T2  - 12th International Conference on Agents and Artificial Intelligence
Y1  - 2020
U6  - http://dx.doi.org/10.5220/0008984406920699
ER  - 
TY  - CHAP
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Hot S-Parameter Measurement System for Plasma and Magnetron Applications
T2  - 2020 German Microwave Conference (GeMiC), Cottbus, Germany, 2020
Y1  - 2020
SN  - 978-3-9820397-1-8
SP  - 124
EP  - 127
ER  - 
TY  - CHAP
A1  - Finger, Felix
A1  - Khalsa, R.
A1  - Kreyer, Jörg
A1  - Mayntz, Joscha
A1  - Braun, Carsten
A1  - Dahmann, Peter
A1  - Esch, Thomas
A1  - Kemper, Hans
A1  - Schmitz, O.
A1  - Bragard, Michael
T1  - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft
T2  - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt
N2  - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented.
Y1  - 2019
ER  - 
TY  - CHAP
A1  - Reke, Michael
A1  - Peter, Daniel
A1  - Schulte-Tigges, Joschua
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Walter, Thomas
A1  - Matheis, Dominik
T1  - A Self-Driving Car Architecture in ROS2
T2  - 2020 International SAUPEC/RobMech/PRASA Conference, Cape Town, South Africa
Y1  - 2020
SN  - 978-1-7281-4162-6
U6  - http://dx.doi.org/10.1109/SAUPEC/RobMech/PRASA48453.2020.9041020
SP  - 1
EP  - 6
ER  - 
TY  - CHAP
A1  - Dinghofer, Kai
A1  - Hartung, Frank
T1  - Analysis of Criteria for the Selection of Machine Learning Frameworks
T2  - 2020 International Conference on Computing, Networking and Communications (ICNC)
Y1  - 2020
U6  - http://dx.doi.org/10.1109/ICNC47757.2020.9049650
SP  - 373
EP  - 377
ER  - 
TY  - CHAP
A1  - Alhwarin, Faraj
A1  - Schiffer, Stefan
A1  - Ferrein, Alexander
A1  - Scholl, Ingrid
T1  - An Optimized Method for 3D Body Scanning Applications Based on KinectFusion
T2  - Communications in Computer and Information Science
Y1  - 2019
U6  - http://dx.doi.org/10.1007/978-3-030-29196-9_6
SN  - 1865-0929
N1  - 11th International Joint Conference on Biomedical Engineering Systems and Technologies, BIOSTEC 2018; Funchal; Portugal; 19 January 2018 through 21 January 2018
VL  - 1024
SP  - 100
EP  - 113
PB  - Springer
ER  - 
TY  - CHAP
A1  - Cordes, Sven
A1  - Gligorevic, Snjezana
A1  - Blicharski, Peter
T1  - Analysis of sine precision influence on DOA estimation using the MUSIC algorithm
T2  - 2019 20th International Radar Symposium (IRS)
Y1  - 2019
SN  - 978-3-7369-9860-5
U6  - http://dx.doi.org/10.23919/IRS.2019.8768162
SP  - 1
EP  - 10
ER  - 
TY  - CHAP
A1  - Sadeghfam, Arash
A1  - Sadeghi-Ahangar, A.
A1  - Elgamal, Abdelrahman
A1  - Heuermann, Holger
T1  - Design and Development of a Novel Self-Igniting Microwave Plasma Jet for Industrial Applications
T2  - IEEE MTT-S International Microwave Symposium Digest
Y1  - 2019
SN  - 978-172811309-8
SP  - 63
EP  - 66
ER  - 
TY  - CHAP
A1  - Galdi, Chiara
A1  - Hartung, Frank
A1  - Dugelay, Jean-Luc
T1  - Socrates: A database of realistic data for source camera recognition on smartphones
T2  - Proceedings of the 8th International Conference on Pattern Recognition Applications and Methods - Volume 1: ICPRAM
Y1  - 2019
SN  - 978-989-758-351-3
U6  - http://dx.doi.org/10.5220/0007403706480655
SP  - 648
EP  - 655
ER  - 
TY  - CHAP
A1  - Weber, Niklas
A1  - Wolf, Martin
ED  - Barton, Thomas
T1  - Datenerhebung für die CDG-Forschung
T2  - Prozesse, Technologie, Anwendungen, Systeme und Management 2017 : angewandte Forschung in der Wirtschaftsinformatik : Tagungsband zur 30. AKWI-Jahrestagung vom 17.09.2017 bis 20.09.2017 an der Hochschule Aschaffenburg / Arbeitskreis Wirtschaftsinformatik an Fachhochschulen (AKWI)
Y1  - 2017
SN  - 978-3-944330-56-3
SP  - 218
EP  - 227
PB  - mana-Buch
CY  - Heide
ER  - 
TY  - CHAP
A1  - Bragard, Michael
A1  - Sube, Maike
A1  - Schneider, Maike
A1  - Jungemann, Christoph
T1  - Introducing a Cross-University Bachelor’s Programme with Orientation Semester - Enabling a Permeable Academic Education System
T2  - 2019 20th International Conference on Research and Education in Mechatronics (REM)
Y1  - 2019
SN  - 978-1-5386-9257-8
U6  - http://dx.doi.org/10.1109/REM.2019.8744132
SP  - 1
EP  - 6
ER  -