TY  - CHAP
A1  - Voronkova, Eva B.
A1  - Bauer, Svetlana M.
A1  - Kotliar, Konstantin
T1  - Computer simulation of the cornea-scleral shell as applied to pressure-volume relationship in the human eye
T2  - 2014 International Conference on Computer Technologies in Physical and Engineering Applications :  ICCTPEA 2014 : proceedings : June 30 2014-July 4 2014, St. Petersburg
Y1  - 2014
SN  - 978-1-4799-5315-8
SP  - 204
EP  - 205
ER  - 
TY  - CHAP
A1  - Bäcker, Matthias
A1  - Schusser, Sebastian
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor system for the monitoring of degradation processes of biodegradable biopolymers
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Oberländer, Jan
A1  - Kirchner, Patrick
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Flexible polyimide-based calorimetric gas sensors for monitoring hy-drogen peroxide in sterilisation processes of aseptic filling machines
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Wu, Chunsheng
A1  - Bronder, Thomas
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - DNA-hybridization detection using light-addressable potentiometric sensor modified with gold layer
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 4
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Werner, Frederik
A1  - Yoshinobu, T.
A1  - Miyamoto, K.
A1  - Schöning, Michael Josef
A1  - Wagner, Torsten
T1  - Semiconductor-based sensors for imaging of chemical processes
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Düsseldorf
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Buniatyan, V.
A1  - Schöning, Michael Josef
T1  - Multi-parameter detection for supporting monitoring and control of biogas processes in agriculture
T2  - Sensoren und Messsysteme 2014 ; Beiträge der 17. GMA/ITG-Fachtagung vom 3. bis 4. Juni 2014 in Nürnberg. (ITG-Fachbericht ; 250)
Y1  - 2014
SN  - 978-3-8007-3622-5
SP  - 1
EP  - 5
PB  - VDE-Verl.
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Schöning, Michael Josef
A1  - Poghossian, Arshak
A1  - Glück, Olaf
A1  - Thust, Marion
T1  - Electrochemical methods for the determination of chemical variables in aqueous media
T2  - Measurement, instrumentation, and sensors handbook / ed. by John G. Webster [u.a.] Vol. 2 : Electromagnetic, optical, radiation, chemical, and biomedical measurement
Y1  - 2014
SN  - 978-1-4398-4891-3
SP  - 55-1
EP  - 55-54
PB  - CRC Pr.
CY  - Boca Raton, Fla.
ER  - 
TY  - CHAP
A1  - Kirchner, Patrick
A1  - Reisert, Steffen
A1  - Schöning, Michael Josef
T1  - Calorimetric gas sensors for hydrogen peroxide monitoring in aseptic food processes
T2  - Gas sensing fundamentals. (Springer Series on Chemical Sensors and Biosensors ; 15)
N2  - For the sterilisation of aseptic food packages it is taken advantage of the microbicidal properties of hydrogen peroxide (H2O2). Especially, when applied in vapour phase, it has shown high potential of microbial inactivation. In addition, it offers a high environmental compatibility compared to other chemical sterilisation agents, as it decomposes into oxygen and water, respectively. Due to a lack in sensory detection possibilities, a continuous monitoring of the H2O2 concentration was recently not available. Instead, the sterilisation efficacy is validated using microbiological tests. However, progresses in the development of calorimetric gas sensors during the last 7 years have made it possible to monitor the H2O2 concentration during operation. This chapter deals with the fundamentals of calorimetric gas sensing with special focus on the detection of gaseous hydrogen peroxide. A sensor principle based on a calorimetric differential set-up is described. Special emphasis is given to the sensor design with respect to the operational requirements under field conditions. The state-of-the-art regarding a sensor set-up for the on-line monitoring and secondly, a miniaturised sensor for in-line monitoring are summarised. Furthermore, alternative detection methods and a novel multi-sensor system for the characterisation of aseptic sterilisation processes are described.
KW  - Calorimetric gas sensor
KW  - Hydrogen peroxide
KW  - Multi-sensor system
Y1  - 2014
SN  - 978-3-642-54518-4 (Print) ; 978-3-642-54519-1 (Online)
U6  - http://dx.doi.org/10.1007/5346_2013_51
SP  - 279
EP  - 309
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Funke, Harald
A1  - Haj Ayed, A.
A1  - Kusterer, K.
A1  - Keinz, Jan
A1  - Kazari, M.
A1  - Kitajima, J.
A1  - Horikawa, A.
A1  - Okada, K.
T1  - Numerical Study on Increased Energy Density for the DLN Micromix Hydrogen Combustion Principle
T2  - Combustion, Fuels and Emissions (ASME Turbo Expo 2014: Turbine Technical Conference and Exposition : Düsseldorf, Germany, June 16–20, 2014 ; Vol. 4A)
Y1  - 2014
SN  - 978-0-7918-4568-4
N1  - Paper No. GT2014-25848
SP  - V04AT04A057
PB  - ASME
CY  - New York, N.Y.
ER  - 
TY  - JOUR
A1  - Kluczka, Sven
A1  - Eckstein, Julian
A1  - Alexopoulos, Spiros
A1  - Vaeßen, Christiane
A1  - Roeb, Martin
T1  - Process simulation for solar steam and dry reforming
JF  - Energy procedia : Proceedings of the SolarPACES 2013 International Conference
N2  - In co-operation with the German Aerospace Center, the Solar-Institut Jülich has been analyzing the different technologies that are available for methanol production from CO2 using solar energy. The aim of the project is to extract CO2 from industrial exhaust gases or directly from the atmosphere to recycle it by use of solar energy. Part of the study was the modeling and simulating of a methane reformer for the production of synthesis gas, which can be operated by solar or hybrid heat sources. The reformer has been simplified in such a way that the model is accurate and enables fast calculations. The developed pseudo-homogeneous one- dimensional model can be regarded as a kind of counter-current heat exchanger and is able to incorporate a steam reforming reaction as well as a dry reforming reaction.
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.egypro.2014.03.092
SN  - 1876-6102 (E-Journal)
VL  - 49
SP  - 850
EP  - 859
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Müller, Martin
A1  - Hirschfeld, Julian
A1  - Lambertz, Rita
A1  - Schulze Lohoff, Andreas
A1  - Lustfeld, Hans
A1  - Pfeifer, Heinz
A1  - Reißel, Martin
T1  - Validation of a novel method for detecting and stabilizing malfunctioning areas in fuel cell stacks
JF  - Journal of power sources
N2  - In this paper a setup for detecting malfunctioning areas of MEAs in fuel cell stacks is described. Malfunctioning areas generate electric cross currents inside bipolar plates. To exploit this we suggest bipolar plates consisting not of two but of three layers. The third one is a highly conducting layer and segmented such that the cross currents move along the segments to the surface of the stack where they can be measured by an inductive sensor. With this information a realistic model can be used to detect the malfunctioning area. Furthermore the third layer will prevent any current inhomogeneity of a malfunctioning cell to spread to neighbouring cells in the stack. In this work the results of measurements in a realistic cell setup will be compared with the results obtained in simulation studies with the same configuration. The basis for the comparison is the reliable characterisation of the electrical properties of the cell components and the implication of these results into the simulation model. The experimental studies will also show the limits in the maximum number of segments, which can be used for a reliable detection of cross currents.
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.jpowsour.2014.08.045
SN  - 1873-2755 (E-Journal); 0378-7753 (Print)
VL  - 272
SP  - 225
EP  - 232
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Wetter, Martin
A1  - Kern, Alexander
T1  - Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
Y1  - 2014
SP  - 1
EP  - 7
ER  - 
TY  - CHAP
A1  - Knott, Thomas C.
A1  - Sofronia, Raluca E.
A1  - Gerressen, Marcus
A1  - Law, Yuen
A1  - Davidescu, Arjana
A1  - Savii, George G.
A1  - Gatzweiler, Karl-Heinz
A1  - Staat, Manfred
A1  - Kuhlen, Torsten W.
T1  - Preliminary bone sawing model for a virtual reality-based training simulator of bilateral sagittal split osteotomy
T2  - Biomedical simulation : 6th International Symposium, ISBMS 2014, Strasbourg, France, October 16-17, 2014 : proceedings (Lecture notes in computer science : vol. 8789)
N2  - Successful bone sawing requires a high level of skill and experience, which could be gained by the use of Virtual Reality-based simulators. A key aspect of these medical simulators is realistic force feedback. The aim of this paper is to model the bone sawing process in order to develop a valid training simulator for the bilateral sagittal split osteotomy, the most often applied corrective surgery in case of a malposition of the mandible. Bone samples from a human cadaveric mandible were tested using a designed experimental system. Image processing and statistical analysis were used for the selection of four models for the bone sawing process. The results revealed a polynomial dependency between the material removal rate and the applied force. Differences between the three segments of the osteotomy line and between the cortical and cancellous bone were highlighted.
KW  - Bone sawing
KW  - virtual reality
KW  - training simulator
Y1  - 2014
SN  - 978-3-319-12057-7 (Online)
SN  - 978-3-319-12056-0 (Print)
U6  - http://dx.doi.org/10.1007/978-3-319-12057-7_1
SP  - 1
EP  - 10
PB  - Springer
CY  - Cham
ER  - 
TY  - CHAP
A1  - Schirra, Julian
A1  - Watmuff, Jon
A1  - Bauschat, J.-Michael
T1  - A relative assessment of existing potential-methodologies to accurately estimate the induced drag of highly non-planar lifting systems
T2  - Advanced aero concepts, design and operations : Applied Aerodynamics Conference  : July 22 -24, 2014, Bristol, UK
Y1  - 2014
SP  - 1
EP  - 13
ER  - 
TY  - CHAP
A1  - Pieper, Martin
A1  - Schulz, Silvia
T1  - Teaching Simulation Methods with COMSOL Multiphysics
N2  - This paper describes two courses on
simulation methods for graduate students:
“Simulation Methods” and “Simulation and
Optimization in Virtual Engineering” The
courses were planned to teach young engineers
how to work with simulation software as well as
to understand the necessary mathematical background.
As simulation software COMSOL is
used. The main philosophy was to combine
theory and praxis in a way that motivates the
students. In addition “soft skills” should be
improved. This was achieved by project work as
final examination. As underlying didactical principle
the ideas of Bloom’s revised taxonomy
were followed. The paper basically focusses on
educational aspects, e.g. how to structure the
course, plan the exercises, organize the project
work and include practical COMSOL examples.
KW  - COMSOL Multiphysics
KW  - Optimization module
KW  - LiveLink for MATLAB
KW  - Bloom Taxonomy
KW  - education
Y1  - 2014
ER  - 
TY  - JOUR
A1  - Handtke, Stefan
A1  - Volland, Sonja
A1  - Methling, Karen
A1  - Albrecht, Dirk
A1  - Becher, Dörte
A1  - Nehls, Jenny
A1  - Bongaerts, Johannes
A1  - Maurer, Karl-Heinz
A1  - Lalk, Michael
A1  - Liesegang, Heiko
A1  - Voigt, Birgit
A1  - Daniel, Rolf
A1  - Hecker, Michael
T1  - Cell physiology of the biotechnological relevant bacterium Bacillus pumilus - An omics-based approach
JF  - Journal of Biotechnology
N2  - Members of the species Bacillus pumilus get more and more in focus of the biotechnological industry as potential new production strains. Based on exoproteome analysis, B. pumilus strain Jo2, possessing a high secretion capability, was chosen for an omics-based investigation. The proteome and metabolome of B. pumilus cells growing either in minimal or complex medium was analyzed. In total, 1542 proteins were identified in growing B. pumilus cells, among them 1182 cytosolic proteins, 297 membrane and lipoproteins and 63 secreted proteins. This accounts for about 43% of the 3616 proteins encoded in the B. pumilus Jo2 genome sequence. By using GC–MS, IP-LC/MS and H NMR methods numerous metabolites were analyzed and assigned to reconstructed metabolic pathways. In the genome sequence a functional secretion system including the components of the Sec- and Tat-secretion machinery was found. Analysis of the exoproteome revealed secretion of about 70 proteins with predicted secretion signals. In addition, selected production-relevant genome features such as restriction modification systems and NRPS clusters of B. pumilus Jo2 are discussed.
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.jbiotec.2014.08.028
SN  - 1873-4863 (E-Journal); 0168-1656 (Print)
IS  - 192(A)
SP  - 204
EP  - 214
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Murib, Mohammed Sharif
A1  - Yeap, Weng-Siang
A1  - Martens, Daan
A1  - Bienstman, Peter
A1  - Ceuninck, Ward de
A1  - Grinsven, Bart van
A1  - Schöning, Michael Josef
A1  - Michiels, Luc
A1  - Haenen, Ken
A1  - Ameloot, Marcel
A1  - Serpengüzel, Ali
A1  - Wagner, Patrick
T1  - Photonic detection and characterization of DNA using sapphire microspheres
JF  - Journal of biomedical optics
N2  - A microcavity-based deoxyribonucleic acid (DNA) optical biosensor is demonstrated for the first time using synthetic sapphire for the optical cavity. Transmitted and elastic scattering intensity at 1510 nm are analyzed from a sapphire microsphere (radius 500  μm, refractive index 1.77) on an optical fiber half coupler. The 0.43 nm angular mode spacing of the resonances correlates well with the optical size of the sapphire sphere. Probe DNA consisting of a 36-mer fragment was covalently immobilized on a sapphire microsphere and hybridized with a 29-mer target DNA. Whispering gallery modes (WGMs) were monitored before the sapphire was functionalized with DNA and after it was functionalized with single-stranded DNA (ssDNA) and double-stranded DNA (dsDNA). The shift in WGMs from the surface modification with DNA was measured and correlated well with the estimated thickness of the add-on DNA layer. It is shown that ssDNA is more uniformly oriented on the sapphire surface than dsDNA. In addition, it is shown that functionalization of the sapphire spherical surface with DNA does not affect the quality factor (Q≈104) of the sapphire microspheres. The use of sapphire is especially interesting because this material is chemically resilient, biocompatible, and widely used for medical implants.
Y1  - 2014
U6  - http://dx.doi.org/10.1117/1.JBO.19.9.097006
SN  - 1560-2281 (E-Journal); 1083-3668 (Print)
VL  - 19
IS  - 9
SP  - 097006
PB  - SPIE
CY  - Bellingham
ER  - 
TY  - JOUR
A1  - Siqueira, Jose R.
A1  - Molinnus, Denise
A1  - Beging, Stefan
A1  - Schöning, Michael Josef
T1  - Incorporating a hybrid urease-carbon nanotubes sensitive nanofilm on capacitive field-effect sensors for urea detection
JF  - Analytical chemistry
N2  - The ideal combination among biomolecules and nanomaterials is the key for reaching biosensing units with high sensitivity. The challenge, however, is to find out a stable and sensitive film architecture that can be incorporated on the sensor’s surface. In this paper, we report on the benefits of incorporating a layer-by-layer (LbL) nanofilm of polyamidoamine (PAMAM) dendrimer and carbon nanotubes (CNTs) on capacitive electrolyte-insulator-semiconductor (EIS) field-effect sensors for detecting urea. Three sensor arrangements were studied in order to investigate the adequate film architecture, involving the LbL film with the enzyme urease: (i) urease immobilized directly onto a bare EIS [EIS-urease] sensor; (ii) urease atop the LbL film over the EIS [EIS-(PAMAM/CNT)-urease] sensor; and (iii) urease sandwiched between the LbL film and another CNT layer [EIS-(PAMAM/CNT)-urease-CNT]. The surface morphology of all three urea-based EIS biosensors was investigated by atomic force microscopy (AFM), while the biosensing abilities were studied by means of capacitance–voltage (C/V) and dynamic constant-capacitance (ConCap) measureaments at urea concentrations ranging from 0.1 mM to 100 mM. The EIS-urease and EIS-(PAMAM/CNT)-urease sensors showed similar sensitivity (∼18 mV/decade) and a nonregular signal behavior as the urea concentration increased. On the other hand, the EIS-(PAMAM/CNT)-urease-CNT sensor exhibited a superior output signal performance and higher sensitivity of about 33 mV/decade. The presence of the additional CNT layer was decisive to achieve a urea based EIS sensor with enhanced properties. Such sensitive architecture demonstrates that the incorporation of an adequate hybrid enzyme-nanofilm as sensing unit opens new prospects for biosensing applications using the field-effect sensor platform.
Y1  - 2014
U6  - http://dx.doi.org/10.1021/ac500458s
SN  - 1520-6882 (E-Journal); 0003-2700 (Print); 0096-4484 (Print)
VL  - 86
IS  - 11
SP  - 5370
EP  - 5375
PB  - ACS Publications
CY  - Columbus
ER  - 
TY  - JOUR
A1  - Srivastava, A.
A1  - Lahiri, S.
A1  - Maiti, M.
A1  - Knolle, F.
A1  - Hoyler, Friedrich
A1  - Scherer, Ulrich W.
A1  - Schnug, E. W.
T1  - Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India
JF  - Journal of Radioanalytical and Nuclear Chemistry
Y1  - 2014
U6  - http://dx.doi.org/0.1007/s10967-014-3450-1
SN  - 1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print)
VL  - 2014
IS  - 302
SP  - 1049
EP  - 1052
PB  - Springer Nature
CY  - Basel
ER  - 
TY  - JOUR
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Thümmler, Stefan
A1  - Thurn, Laura
T1  - Experimental investigation on selective laser melting of glass
JF  - Physics procedia : 8th International Conference on Laser Assisted Net Shape Engineering LANE 2014
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.phpro.2014.08.118
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
VL  - 56 (2014)
SP  - 357
EP  - 364
PB  - Elsevier
CY  - Amsterdam
ER  -