TY  - CHAP
A1  - Eichler, Fabian
A1  - Skupin, Marco
A1  - Thurn, Laura
A1  - Kasch, Susanne
A1  - Schmidt, Thomas
T1  - Operating limits for beam melting of glass materials
T2  - Modern Technologies in Manufacturing (MTeM 2019)
N2  - Laser-based Additive Manufacturing (AM) processes for the use of metals out of the powder bed have been investigated profusely and are prevalent in industry. Although there is a broad field of application, Laser Powder Bed Fusion (LPBF), also known as Selective Laser Melting (SLM) of glass is not fully developed yet. The material properties of glass are significantly different from the investigated metallic material for LPBF so far. As such, the process cannot be transferred, and the parameter limits and the process sequence must be redefined for glass. Starting with the characterization of glass powders, a parameter field is initially confined to investigate the process parameter of different glass powder using LPBFprocess. A feasibility study is carried out to process borosilicate glass powder. The effects of process parameters on the dimensional accuracy of fabricated parts out of borosilicate and hints for the post-processing are analysed and presented in this paper.
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901004
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01004
ER  - 
TY  - CHAP
A1  - Abbas, Karim
A1  - Thurn, Laura
A1  - Kessler, Julia
A1  - Eichler, Fabian
T1  - Basic research of the consideration of additive manufactured lattice structures under thermoand fluid dynamic loads
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901009
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01009
ER  - 
TY  - CHAP
A1  - Luft, Angela
A1  - Gebhardt, Andreas
A1  - Balc, Nicolae
T1  - Challenges of additive manufacturing in production systems
T2  - Modern technologies in manufacturing (MTeM 2019)
Y1  - 2019
U6  - http://dx.doi.org/10.1051/matecconf/201929901003
N1  - MATEC Web of Conferences 299; MTeM 2019
VL  - 299
IS  - Article 01003
ER  - 
TY  - JOUR
A1  - Finger, Felix
A1  - Bil, Cees
A1  - Braun, Carsten
T1  - Initial Sizing Methodology for Hybrid-Electric General Aviation Aircraft
JF  - Journal of Aircraft
Y1  - 2019
U6  - http://dx.doi.org/10.2514/1.C035428
SN  - 1533-3868
VL  - 57
IS  - 2
SP  - 245
EP  - 255
ER  - 
TY  - THES
A1  - Engelmann, Ulrich M.
T1  - Assessing magnetic fluid hyperthermia : magnetic relaxation simulation, modeling of nanoparticle uptake inside pancreatic tumor cells and in vitro efficacy
Y1  - 2019
SN  - 978-3-945954-58-4
N1  - Dissertation, Rheinisch-Westfälische Technische Hochschule Aachen, 2019
PB  - Infinite Science Publishing
CY  - Lübeck
ER  - 
TY  - JOUR
A1  - Chen, Chao
A1  - Jost, Peter
A1  - Volker, Hanno
A1  - Kaminski, Marvin
A1  - Wirtssohn, Matti R.
A1  - Engelmann, Ulrich M.
A1  - Krüger, K.
A1  - Schlich, Franziska F.
A1  - Schlockermann, Carl
A1  - Lobo, Ricardo P.S.M.
A1  - Wuttig, Matthias
T1  - Dielectric properties of amorphous phase-change materials
JF  - Physical Review B
Y1  - 2017
U6  - http://dx.doi.org/10.1103/PhysRevB.95.094111
SN  - 2469-9950
VL  - 95
IS  - 9
SP  - Article number 094111
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Buhl, Eva Miriam
A1  - Baumann, Martin
A1  - Schmitz-Rode, Thomas
A1  - Slabu, Ioana
T1  - Agglomeration of magnetic nanoparticles and its effects on magnetic hyperthermia
JF  - Current Directions in Biomedical Engineering
Y1  - 2017
U6  - http://dx.doi.org/10.1515/cdbme-2017-0096
SN  - 2364-5504
VL  - 3
IS  - 2
SP  - 457
EP  - 460
PB  - De Gruyter
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Buhl, Eva Miriam
A1  - Draack, Sebastian
A1  - Viereck, Thilo
A1  - Frank, 
A1  - Schmitz-Rode, Thomas
A1  - Slabu, Ioana
T1  - Magnetic relaxation of agglomerated and immobilized iron oxide nanoparticles for hyperthermia and imaging applications
JF  - IEEE Magnetic Letters
N2  - Magnetic nanoparticles (MNPs) are used as therapeutic and diagnostic agents for local delivery of heat and image contrast enhancement in diseased tissue. Besides magnetization, the most important parameter that determines their performance for these applications is their magnetic relaxation, which can be affected when MNPs immobilize and agglomerate inside tissues. In this letter, we investigate different MNP agglomeration states for their magnetic relaxation properties under excitation in alternating fields and relate this to their heating efficiency and imaging properties. With focus on magnetic fluid hyperthermia, two different trends in MNP heating efficiency are measured: an increase by up to 23% for agglomerated MNP in suspension and a decrease by up to 28% for mixed states of agglomerated and immobilized MNP, which indicates that immobilization is the dominant effect. The same comparatively moderate effects are obtained for the signal amplitude in magnetic particle spectroscopy.
Y1  - 2018
U6  - http://dx.doi.org/10.1109/LMAG.2018.2879034
SN  - 1949-307X
VL  - 9
IS  - Article number 8519617
PB  - IEEE
CY  - New York, NY
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Roeth, Anjali A.J.
A1  - Eberbeck, Dietmar
A1  - Buhl, Eva Miriam
A1  - Neumann, Ulf Peter
A1  - Schmitz-Rode, Thomas
A1  - Slabu, Ioana
T1  - Combining Bulk Temperature and Nanoheating Enables Advanced Magnetic Fluid Hyperthermia Efficacy on Pancreatic Tumor Cells
JF  - Scientific Reports
N2  - Many efforts are made worldwide to establish magnetic fluid hyperthermia (MFH) as a treatment for organ-confined tumors. However, translation to clinical application hardly succeeds as it still lacks of understanding the mechanisms determining MFH cytotoxic effects. Here, we investigate the intracellular MFH efficacy with respect to different parameters and assess the intracellular cytotoxic effects in detail. For this, MiaPaCa-2 human pancreatic tumor cells and L929 murine fibroblasts were loaded with iron-oxide magnetic nanoparticles (MNP) and exposed to MFH for either 30 min or 90 min. The resulting cytotoxic effects were assessed via clonogenic assay. Our results demonstrate that cell damage depends not only on the obvious parameters bulk temperature and duration of treatment, but most importantly on cell type and thermal energy deposited per cell during MFH treatment. Tumor cell death of 95% was achieved by depositing an intracellular total thermal energy with about 50% margin to damage of healthy cells. This is attributed to combined intracellular nanoheating and extracellular bulk heating. Tumor cell damage of up to 86% was observed for MFH treatment without perceptible bulk temperature rise. Effective heating decreased by up to 65% after MNP were internalized inside cells.
Y1  - 2018
U6  - http://dx.doi.org/10.1038/s41598-018-31553-9
SN  - 2045-2322
VL  - 8
IS  - 1
SP  - Article number 13210
PB  - Springer Nature
CY  - Cham
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Seifert, Julian
A1  - Mues, Benedikt
A1  - Roitsch, Stefan
A1  - Ménager, Christine
A1  - Schmidt, Annette M.
A1  - Slabu, Ioana
T1  - Heating efficiency of magnetic nanoparticles decreases with gradual immobilization in hydrogels
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.09.113
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 486
EP  - 494
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Engelmann, Ulrich M.
A1  - Shasha, Carolyn
A1  - Teeman, Eric
A1  - Slabu, Iona
A1  - Krishnan, Kannan M.
T1  - Predicting size-dependent heating efficiency of magnetic nanoparticles from experiment and stochastic Néel-Brown Langevin simulation
JF  - Journal of Magnetism and Magnetic Materials
Y1  - 2019
U6  - http://dx.doi.org/10.1016/j.jmmm.2018.09.041
SN  - 0304-8853
VL  - 471
IS  - 1
SP  - 450
EP  - 456
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Slabu, Ioana
A1  - Roeth, Anjali A.
A1  - Engelmann, Ulrich M.
A1  - Wiekhorst, Frank
A1  - Buhl, Eva M.
A1  - Neumann, Ulf P.
A1  - Schmitz-Rode, Thomas
T1  - Modeling of magnetoliposome uptake in human pancreatic tumor cells in vitro
JF  - Nanotechnology
Y1  - 2019
U6  - http://dx.doi.org/10.1088/1361-6528/ab033e
SN  - 1361-6528
VL  - 30
IS  - 18
SP  - 184004
ER  - 
TY  - CHAP
A1  - Matcha, Heike
A1  - Karzel, Rüdiger
A1  - Quasten, Gero
T1  - Architectural Design with Parametric Modeling & Customized Mass Production: Explorations and Case Studies in Architectural Design and Production Methods
T2  - Language and the Scientific Imagination. The 11th International Conference of ISSEI, Language Centre, University of Helsinki (Finland) 28 July - 2 August 2008
Y1  - 2008
ER  - 
TY  - CHAP
A1  - Matcha, Heike
T1  - Parametric possibilities: designing with parametric modelling
T2  - Predicting the Future [25th eCAADe Conference Proceedings]
Y1  - 2007
SN  - 978-0-9541183-6-5
SP  - 849
EP  - 856
ER  - 
TY  - CHAP
A1  - Karzer, Rüdiger
A1  - Matcha, Heike
T1  - Experimental design-build: teaching parameter-based design
T2  - Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings]
Y1  - 2009
SN  - 978-0-9541183-8-9
U6  - http://dx.doi.org/10.52842/conf.ecaade.2009.153
SP  - 153
EP  - 158
ER  - 
TY  - CHAP
A1  - Matcha, Heike
A1  - Quasten, Gero
T1  - A Parametric-Typological Tool: More Diversity for Mass Produced Single Family Homes Through Parametrized Design and Customized Mass Production
T2  - Computation: The New Realm of Architectural Design [27th eCAADe Conference Proceedings
Y1  - 2009
SN  - 978-0-9541183-8-9
SP  - 409
EP  - 416
ER  - 
TY  - CHAP
A1  - Matcha, Heike
A1  - Ljubas, Ante
T1  - Parametric Origami: Adaptable temporary buildings
T2  - Future cities: 28th eCAADe Conference Proceedings. eCAADe: Conferences. Zurich, Switzerland
Y1  - 2010
SN  - 978-0-9541183-7-2
SP  - 243
EP  - 251
ER  - 
TY  - JOUR
A1  - Engel, Mareike
A1  - Gemünde, Andre
A1  - Holtmann, Dirk
A1  - Müller-Renno, Christine
A1  - Ziegler, Christiane
A1  - Tippkötter, Nils
A1  - Ulber, Roland
T1  - Clostridium acetobutylicum’s connecting world: cell appendage formation in bioelectrochemical systems
JF  - ChemElectroChem
Y1  - 2019
U6  - http://dx.doi.org/10.1002/celc.201901656
SN  - 2196-0216
IS  - Accepted Article
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - CHAP
A1  - Matcha, Heike
A1  - Barczik, Günter
ED  - Valena, Tomas
ED  - Avermaete, Tom
ED  - Vrachliotis, Georg
T1  - Mass Diversity: Individualized housing via parametric typology
T2  - Structuralism Reloaded? Rule-Based Design in Architecture and Urbanism
Y1  - 2011
SN  - 978-3-936681-47-5
SP  - 354
EP  - 358
PB  - Edition Axel Menges
CY  - Fellbach
ER  - 
TY  - JOUR
A1  - Digel, Ilya
A1  - Akimbekov, N.
A1  - Turalieva, M.
A1  - Mansurov, Z.
A1  - Temiz Artmann, Aysegül
A1  - Eshibaev, A.
A1  - Zhubanova, A.
T1  - Usage of Carbonized Plant Wastes for Purification of Aqueous Solutions
JF  - Journal of Industrial Technology and Engineering
Y1  - 2013
VL  - 2
IS  - 07
SP  - 47
EP  - 54
ER  -