TY  - JOUR
A1  - Khodaverdi, M.
A1  - Chatziioannou, A. F.
A1  - Weber, S.
A1  - Ziemons, Karl
A1  - Halling, H.
A1  - Pietrzyk, U.
T1  - Investigation of different MicroCT scanner configurations by GEANT4 simulations
JF  - IEEE Transactions on Nuclear Science
N2  - This study has been performed to design the combination of the new ClearPET (ClearPET is a trademark of the Crystal Clear Collaboration), a small animal positron emission tomography (PET) system, with a micro-computed tomography (microCT) scanner. The properties of different microCT systems have been determined by simulations based on GEANT4. We will demonstrate the influence of the detector material and the X-ray spectrum on the obtained contrast. Four different detector materials (selenium, cadmium zinc telluride, cesium iodide and gadolinium oxysulfide) and two X-ray spectra (a molybdenum and a tungsten source) have been considered. The spectra have also been modified by aluminum filters of varying thickness. The contrast between different tissue types (water, air, brain, bone and fat) has been simulated by using a suitable phantom. The results indicate the possibility to improve the image contrast in microCT by an optimized combination of the X-ray source and detector material.
Y1  - 2005
SN  - 0018-9499
VL  - 52
IS  - 1
SP  - 188
EP  - 192
ER  - 
TY  - JOUR
A1  - Khodaverdi, M.
A1  - Pauly, F.
A1  - Schroder, G.
A1  - Ziemons, Karl
A1  - Sievering, R.
A1  - Halling, H.
T1  - Preliminary studies of a micro-CT for a combined small animal PET/CT scanner
JF  - 2001 IEEE Nuclear Science Symposium Conference Record, Vol. 3
N2  - We are developing an X-ray computed tomography (CT) system which will be combined with a high resolution animal PET system. This permits acquisition of both molecular and anatomical images in a single machine. In particular the CT will also be utilized for the quantification of the animal PET data by providing accurate data for attenuation correction. A first prototype has been built using a commercially available plane silicon diode detector. A cone-beam reconstruction provides the images using the Feldkamp algorithm. First measurements with this system have been performed on a mouse. It could be shown that the CT setup fulfils all demands for a high quality image of the skeleton of the mouse. It is also suited for soft tissue measurements. To improve contrast and resolution and to acquire the X-ray energy further development of the system, especially the use of semiconductor detectors and iterative reconstruction algorithms are planned.
Y1  - 2002
SN  - 1082-3654
SP  - 1605
EP  - 1606
ER  - 
TY  - JOUR
A1  - Khodaverdi, M.
A1  - Chaziioannou, A. F.
A1  - Weber, S.
A1  - Ziemons, Karl
A1  - Halling, H.
A1  - Pietrzyk, U.
T1  - Investigation of different microCT scanner configurations by GEANT4 simulations
JF  - 2003 IEEE Nuclear Science Symposium Conference Record, Vol. 4
N2  - This study has been performed to design the combination of the new ClearPET TM (ClearPET is a trademark of the Crystal Clear Collaboration), a small animal Positron Emission Tomography (PET) system, with a microComputed Tomography (microCT) scanner. The properties of different microCT systems have been determined by simulations based on GEANT4. We demonstrate the influence of the detector material and the X-ray spectrum on the obtained contrast. Four different detector materials (selenium, cadmium zinc telluride, cesium iodide and gadolinium oxysulfide) and two X-ray spectra (a molybdenum and a tungsten source) have been considered. The spectra have also been modified by aluminum filters of varying thickness. The contrast between different tissue types (water, air, brain, bone and fat) has been simulated by using a suitable phantom. The results indicate the possibility to improve the image contrast in microCT by an optimized combination of the X-ray source and detector material.
Y1  - 2004
SN  - 1082-3654
SP  - 2989
EP  - 2993
ER  -