TY  - JOUR
A1  - Leschinger, Tim
A1  - Besch, Katharina
A1  - Aydin, Cansu
A1  - Staat, Manfred
A1  - Scaal, Martin
A1  - Müller, Lars Peter
A1  - Wegmann, Kilian
T1  - Irreparable rotator cuff tears: a biomechanical comparison of superior capsuloligamentous complex reconstruction techniques and an interposition graft technique
JF  - The Orthopaedic Journal of Sports Medicine
Y1  - 2019
U6  - http://dx.doi.org/10.1177/2325967119864590
VL  - 7
IS  - 8
SP  - 1
EP  - 5
ER  - 
TY  - JOUR
A1  - Anding, Ralf
A1  - Tabaza, Ruth
A1  - Staat, Manfred
A1  - Trenz, Eva
A1  - Lohmann, Philipp
A1  - Klinge, Uwe
A1  - Kirschner-Hermanns, Ruth
T1  - Introducing a method of in vitro testing of different anchoring systems used for female incontinence and prolapse surgery
JF  - BioMed research international
Y1  - 2013
SN  - 1110-7251 (E-Journal); 2314-6141 (E-Journal); 1110-7243 (Print); 2314-6133 (Print)
VL  - Vol. 2013
SP  - Article ID 401417
ER  - 
TY  - JOUR
A1  - Hackl, Michael
A1  - Nacov, Julia
A1  - Kammerlohr, Sandra
A1  - Staat, Manfred
A1  - Buess, Eduard
A1  - Leschinger, Tim
A1  - Müller, Lars P.
A1  - Wegmann, Kilian
T1  - Intratendinous Strain Variations of the Supraspinatus Tendon Depending on Repair Technique: A Biomechanical Analysis Regarding the Cause of Medial Cuff Failure
JF  - The American Journal of Sports Medicine
Y1  - 2021
U6  - http://dx.doi.org/10.1177/03635465211006138
SN  - 1552-3365
SN  - 0363-5465
VL  - 49
IS  - 7
SP  - 1847
EP  - 1853
PB  - Sage
CY  - London
ER  - 
TY  - JOUR
A1  - Duong, Minh Tuan
A1  - Nguyen, Nhu Huynh
A1  - Tran, Thanh Ngoc
A1  - Tolba, R. H.
A1  - Staat, Manfred
T1  - Influence of refrigerated storage on tensile mechanical properties of porcine liver and spleen
JF  - International biomechanics
Y1  - 2015
U6  - http://dx.doi.org/10.1080/23335432.2015.1049295
SN  - 2333-5432
VL  - Vol. 2
IS  - Iss. 1
SP  - 79
EP  - 88
PB  - Taylor & Francis
CY  - London
ER  - 
TY  - JOUR
A1  - Nguyen, Nhu Huynh
A1  - Duong, Minh Tuan
A1  - Tran, Thanh Ngoc
A1  - Pham, Phu Tinh
A1  - Grottke, O.
A1  - Tolba, R.
A1  - Staat, Manfred
T1  - Influence of a freeze–thaw cycle on the stress–stretch curves of tissues of porcine abdominal organs
JF  - Journal of Biomechanics
N2  - The paper investigates both fresh porcine spleen and liver and the possible decomposition of these organs under a freeze–thaw cycle. The effect of tissue preservation condition is an important factor which should be taken into account for protracted biomechanical tests. In this work, tension tests were conducted for a large number of tissue specimens from twenty pigs divided into two groups of 10. Concretely, the first group was tested in fresh state; the other one was tested after a freeze-thaw cycle which simulates the conservation conditions before biomechanical experiments. A modified Fung model for isotropic behavior was adopted for the curve fitting of each kind of tissues. Experimental results show strong effects of the realistic freeze–thaw cycle on the capsule of elastin-rich spleen but negligible effects on the liver which virtually contains no elastin. This different behavior could be explained by the autolysis of elastin by elastolytic enzymes during the warmer period after thawing. Realistic biomechanical properties of elastin-rich organs can only be expected if really fresh tissue is tested. The observations are supported by tests of intestines.
KW  - Autolysis
KW  - Decomposition
KW  - Freeze–thaw process
KW  - Spleen
KW  - Liver
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.jbiomech.2012.07.008
SN  - 1873-2380
VL  - 45
IS  - 14
SP  - 2382
EP  - 2386
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Doorschodt, B. M.
A1  - Schreinemachers, M. C. J. M.
A1  - Behbahani, Mehdi
A1  - Florquin, S.
A1  - Weis, J.
A1  - Staat, Manfred
A1  - Tolba, R. H.
T1  - Hypothermic machine perfusion of kidney grafts: which pressure is preferred
JF  - Annals of Biomedical Engineering. 39 (2011), H. 3
Y1  - 2011
SN  - 1573-9686
SP  - 1051
EP  - 1059
PB  - Springer
CY  - Berlin
ER  - 
TY  - JOUR
A1  - Laack, Walter van
A1  - Levers, A.
A1  - Staat, Manfred
T1  - Gonarthrosetherapie auf Kernspinresonanzbasis mit MBST-Vierjahresbeobachtungen
JF  - Orthopädische Nachrichten : Zeitung für Orthopädie und Unfallchirurgie. 2013, H. 7/8
Y1  - 2013
SN  - 1437-2193
SP  - 13
PB  - Biermann
CY  - Köln
ER  - 
TY  - JOUR
A1  - Jung, Alexander
A1  - Staat, Manfred
A1  - Müller, Wolfram
T1  - Flight style optimization in ski jumping on normal, large, and ski flying hills
JF  - Journal of biomechanics
Y1  - 2013
SN  - 1873-2380 (E-Journal); 0021-9290 (Print)
N1  - Corrigendum to “Flight style optimization in ski jumping on normal, large, and ski flying hills” [J. Biomech 47 (2014) 716-722] Journal of Biomechanics, 2018;71:313.
VL  - Vol. 47
IS  - Iss. 3
SP  - 716
EP  - 722
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Novacek, V.
A1  - Tran, Thanh Ngoc
A1  - Klinge, U.
A1  - Tolba, R. H.
A1  - Staat, Manfred
A1  - Bronson, D. G.
A1  - Miesse, A. M.
A1  - Whiffen, J.
A1  - Turquier, F.
T1  - Finite element modelling of stapled colorectal end-to-end anastomosis : Advantages of variable height stapler design
JF  - Journal of Biomechanics
N2  - The impact of surgical staplers on tissues has been studied mostly in an empirical manner. In this paper, finite element method was used to clarify the mechanics of tissue stapling and associated phenomena. Various stapling modalities and several designs of circular staplers were investigated to evaluate the impact of the device on tissues and mechanical performance of the end-to-end colorectal anastomosis. Numerical simulations demonstrated that a single row of staples is not adequate to resist leakage due to non-linear buckling and opening of the tissue layers between two adjacent staples. Compared to the single staple row configuration, significant increase in stress experienced by the tissue at the inner staple rows was observed in two and three rows designs. On the other hand, adding second and/or third staple row had no effect on strain in the tissue inside the staples. Variable height design with higher staples in outer rows significantly reduced the stresses and strains in outer rows when compared to the same configuration with flat cartridge.
KW  - Variable height stapler design
KW  - Anastomotic leakage
KW  - Finite element modelling
KW  - End-to-end colorectal anastomosis
KW  - Surgical staplers
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.jbiomech.2012.07.021
SN  - 1873-2380
VL  - 45
IS  - 115
SP  - 2693
EP  - 2697
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Staat, Manfred
A1  - Heitzer, M.
T1  - FEM-computation of load carrying capacity of highly loaded passive components by direct methods. Heitzer, M. ; Staat, M.
JF  - Nuclear Engineering and Design. 193 (1999), H. 3
Y1  - 1999
SN  - 0029-5493
SP  - 349
EP  - 358
ER  -