TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, M.
A1  - Molin, D. G. M.
A1  - Akker, N. M. S. van den
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation
JF  - Procedia Engineering
N2  - A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.815
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 948
EP  - 951
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Wenzel, L.
A1  - Leinhos, Marcel
A1  - Poghossian, Arshak
A1  - Biselli, Manfred
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Enzymatically catalyzed degradation of biodegradable polymers investigated by means of a semiconductor-based field-effect sensor
JF  - Procedia Engineering
N2  - A semiconductor field-effect device has been used for an enzymatically catalyzed degradation of biopolymers for the first time. This novel technique is capable to monitor the degradation process of multiple samples in situ and in real-time. As model system, the degradation of the biopolymer poly(D, L-lactic acid) has been monitored in the degradation medium containing the enzyme lipase from Rhizomucor miehei. The obtained results demonstrate the potential of capacitive field-effect sensors for degradation studies of biodegradable polymers.
KW  - Field-effect sensor
KW  - enzymatic (bio)degradation
KW  - poly(d, l-lactic acid)
KW  - in-situ monitoring
KW  - impedance spectroscopy
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.proeng.2014.11.689
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 1314
EP  - 1317
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Weil, M. H.
A1  - Bäcker, Matthias
A1  - Mayer, D.
A1  - Schöning, Michael Josef
T1  - Field-effect Devices Functionalised with Gold-Nanoparticle/Macromolecule Hybrids: New Opportunities for a Label-Free Biosensing
JF  - Procedia Engineering
N2  - Field-effect capacitive electrolyte-insulator-semiconductor (EIS) sensors functionalised with citrate-capped gold nanoparticles (AuNP) have been used for the electrostatic detection of macromolecules by their intrinsic molecular charge. The EIS sensor detects the charge changes in the AuNP/macromolecule hybrids induced by the adsorption or binding events. A feasibility of the proposed detection scheme has been exemplary demonstrated by realising EIS sensors for the detection of poly-D-lysine molecules.
Y1  - 2012
U6  - http://dx.doi.org/10.1016/j.proeng.2012.09.136
SN  - 1877-7058
N1  - Part of special issue "26th European Conference on Solid-State Transducers, EUROSENSOR 2012"
IS  - 47
SP  - 273
EP  - 276
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Mayer, Dirk
A1  - Schöning, Michael Josef
T1  - Gating capacitive field-effect sensors by the charge of nanoparticle/molecule hybrids
JF  - Nanoscale
Y1  - 2015
U6  - http://dx.doi.org/10.1039/C4NR05987E
SN  - 2040-3372 (E-Journal); 2040-3364 (Print)
SP  - 1023
EP  - 1031
PB  - Royal Society of Chemistry (RSC)
CY  - Cambridge
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Razavi, A.
A1  - Bäcker, Matthias
A1  - Bijnens, N.
A1  - Williams, O. A.
A1  - Haenen, K.
A1  - Moritz, W.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Nanocrystalline-diamond thin films with high pH and penicillin sensitivity prepared on a capacitive Si–SiO2 structure
JF  - Electrochimica Acta. 54 (2009), H. 25
Y1  - 2009
SN  - 0013-4686
SP  - 5981
EP  - 5985
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Siegert, Petra
A1  - Willenberg, H.
A1  - Poghossian, Arshak
A1  - Keusgen, M.
A1  - Schöning, Michael Josef
T1  - Detection of Adrenaline Based on Substrate Recycling Amplification
JF  - Procedia Engineering
N2  - An amperometric enzyme biosensor has been applied for the detection of adrenaline. The adrenaline biosensor has been prepared by modification of an oxygen electrode with the enzyme laccase that operates at a broad pH range between pH 3.5 to pH 8. The enzyme molecules were immobilized via cross-linking with glutaraldehyde. The sensitivity of the developed adrenaline biosensor in different pH buffer solutions has been studied.
Y1  - 2015
U6  - http://dx.doi.org/10.1016/j.proeng.2015.08.708
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 540
EP  - 543
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Molinnus, Denise
A1  - Bäcker, Matthias
A1  - Iken, Heiko
A1  - Poghossian, Arshak
A1  - Keusgen, Michael
A1  - Schöning, Michael Josef
T1  - Concept for a biomolecular logic chip with an integrated sensor and actuator function
JF  - Physica status solidi (a)
N2  - A concept for a new generation of an integrated multi-functional biosensor/actuator system is developed, which is based on biomolecular logic principles. Such a system is expected to be able to detect multiple biochemical input signals simultaneously and in real-time and convert them into electrical output signals with logical operations such as OR, AND, etc. The system can be designed as a closed-loop drug release device triggered by an enzyme logic gate, while the release of the drug induced by the actuator at the required dosage and timing will be controlled by an additional drug sensor. Thus, the system could help to make an accurate and specific diagnosis. The presented concept is exemplarily demonstrated by using an enzyme logic gate based on a glucose/glucose oxidase system, a temperature-responsive hydrogel mimicking the actuator function and an insulin (drug) sensor. In this work, the results of functional testing of individual amperometric glucose and insulin sensors as well as an impedimetric sensor for the detection of the hydrogel swelling/shrinking are presented.
Y1  - 2015
U6  - http://dx.doi.org/10.1002/pssa.201431913
SN  - 1862-6319
VL  - 212
IS  - 6
SP  - 1382
EP  - 1388
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Leinhos, Marcel
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Micromachined multi-parameter sensor chip for the control of polymer-degradation medium
JF  - Physica Status Solidi (A) : special issue on engineering and functional interfaces
N2  - It is well known that the degradation environment can strongly influence the biodegradability and kinetics of biodegradation processes of polymers. Therefore, besides the monitoring of the degradation process, it is also necessary to control the medium in which the degradation takes place. In this work, a micromachined multi-parameter sensor chip for the control of the polymer-degradation medium has been developed. The chip combines a capacitive field-effect pH sensor, a four-electrode electrolyte-conductivity sensor and a thin-film Pt-temperature sensor. The results of characterization of individual sensors are presented. In addition, the multi-parameter sensor chip together with an impedimetric polymer-degradation sensor was simultaneously characterized in degradation solutions with different pH and electrolyte conductivity. The obtained results demonstrate the feasibility of the multi-parameter sensor chip for the control of the polymer-degradation medium.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/pssa.201330364
SN  - 1521-396X (E-Journal); 1862-6319 (E-Journal); 0031-8965 (Print); 1862-6300 (Print)
VL  - 211
IS  - 6
SP  - 1346
EP  - 1351
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Kerroumi, Iman
A1  - Schusser, Sebastian
A1  - Bäcker, Matthias
A1  - Zander, Willi
A1  - Schubert, Jürgen
A1  - Buniatyan, Vahe V.
A1  - Martirosyan, Norayr W.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Multiparameter sensor chip with Barium Strontium Titanate as multipurpose material
JF  - Electroanalysis
N2  - It is well known that biochemical and biotechnological processes are strongly dependent and affected by a variety of physico-chemical parameters such as pH value, temperature, pressure and electrolyte conductivity. Therefore, these quantities have to be monitored or controlled in order to guarantee a stable process operation, optimization and high yield. In this work, a sensor chip for the multiparameter detection of three physico-chemical parameters such as electrolyte conductivity, pH and temperature is realized using barium strontium titanate (BST) as multipurpose material. The chip integrates a capacitively coupled four-electrode electrolyte-conductivity sensor, a capacitive field-effect pH sensor and a thin-film Pt-temperature sensor. Due to the multifunctional properties of BST, it is utilized as final outermost coating layer of the processed sensor chip and serves as passivation and protection layer as well as pH-sensitive transducer material at the same time. The results of testing of the individual sensors of the developed multiparameter sensor chip are presented. In addition, a quasi-simultaneous multiparameter characterization of the sensor chip in buffer solutions with different pH value and electrolyte conductivity is performed. To study the sensor behavior and the suitability of BST as multifunctional material under harsh environmental conditions, the sensor chip was exemplarily tested in a biogas digestate.
Y1  - 2014
U6  - http://dx.doi.org/10.1002/elan.201400076
SN  - 1521-4109 (E-Journal); 1040-0397 (Print)
VL  - 26
IS  - 5
SP  - 980
EP  - 987
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Schubert, J.
A1  - Zander, W.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Schöning, Michael Josef
T1  - Chemical sensors based on a high-k perovskite oxide of barium strontium titanate
JF  - Procedia Engineering
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.
KW  - barium strontium titanate
KW  - high-k material
KW  - contactless conductivity sensor
KW  - multi-functional material
KW  - hydrogen peroxide
Y1  - 2014
U6  - http://dx.doi.org/10.1016/j.proeng.2014.11.258
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 28
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  -