TY  - JOUR
A1  - Breitbach, Gerd
A1  - Schubert, F.
T1  - A contribution to stress prediction in coatings for gas turbine blades
JF  - Archive of applied mechanics. 73 (2004), H. 9-10
Y1  - 2004
SN  - 0939-1533
N1  - 2. ISSN (Druck-Ausg.): 1432-0681
SP  - 682
EP  - 689
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Schmidt-Plutka, A.
A1  - Schubert, F.
A1  - Nickel, H.
T1  - Deformation behaviour of structures exposed at very high temperatures to cyclic thermal and mechanical loadings
JF  - Structural mechanics in reactor technology : transactions of the 12th International Conference on Structural Mechanics in Reactor Technology, Stuttgart, Germany, 15-20 August 1993 / ed. Karl F. Kussmaul. - Bd. L : Inelastic behaviour of solids and structures
Y1  - 1993
SN  - 0-444-81515-5
N1  - SMiRT <12, 1993, Stuttgart>  ; L08/3
SP  - 203
EP  - 208
PB  - Elsevier
CY  - Amsterdam [u.a.]
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Deschka, S.
A1  - Akiba, M.
T1  - High heat flux tests on brazed divertor components in electron and ion beam test facilities / S. Deschka ;  M. Akiba ; G. Breitbach ...
JF  - International journal of refractory metals and hard materials. 11 (1992), H. 6
Y1  - 1992
SN  - 0263-4368
N1  - 2. ISSN (Druck-Ausg.): 0263-4368
SP  - 367
EP  - 375
ER  - 
TY  - JOUR
A1  - Breitbach, Gerd
A1  - Wolf, U.
A1  - Deschka, S.
A1  - Nickel, H.
T1  - Thermomechanical analysis of an actively cooled divertor mock up
JF  - Tagungsbericht : Jahrestagung Kerntechnik : Stadthalle Karlsruhe, 5.-7. Mai 1992, Karlsruhe = Proceedings / Kerntechnische Gesellschaft ... [Red.: Karl G. Bauer]. - 1. Aufl., als Ms. gedr..
Y1  - 1992
N1  - Jahrestagung Kerntechnik <1992, Karlsruhe>
SP  - 457
EP  - 461
PB  - INFOFORUM
CY  - Bonn
ER  - 
TY  - BOOK
A1  - Breitbach, Gerd
T1  - Proceedings of the Workshop on Structural Design Criteria for HTR : Jülich, 31. January - 1. February 1989 / ed.: G. Breitbach ... - Als Ms. gedr.
Y1  - 1989
N1  - (Berichte der Kernforschungsanlage Jülich : Jül-Conf. ; 71) ; Workshop on Structural Design Criteria for HTR <1989, Jülich>
PB  - Zentralbibliothek d. Kernforschungsanlage
CY  - Jülich
ER  - 
TY  - CHAP
A1  - Beckmöller, S.
A1  - Wolters, J.
A1  - Breitbach, Gerd
A1  - Penkalla, H. J.
A1  - Schubert, F.
T1  - Microstructural dependent constitutive equation for inelastic analysis of internally cooled IN 738 LC turbine blades
T2  - Materials for advanced power engineering 1994 : proceedings of a conference held in Liege, Belgium, 3 - 6 Oct. 1994
Y1  - 1995
SN  - 0792330749
SP  - 829
EP  - 839
PB  - Kluwer
CY  - Dordrecht
ER  - 
TY  - JOUR
A1  - Alebouyeh Samami, Behzad
A1  - Pieper, Martin
A1  - Breitbach, Gerd
A1  - Hodapp, Josef
T1  - Heat production in the windings of the stators of electric machines under stationary condition
JF  - Heat and mass transfer
N2  - In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.
Y1  - 2014
U6  - https://doi.org/10.1007/s00231-014-1371-8
SN  - 0947-7411 (Print) ; 1432-1181 (E-Journal)
VL  - 50
SP  - 1707
EP  - 1716
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - JOUR
A1  - Alexopoulos, Spiros
A1  - Breitbach, Gerd
A1  - Hoffschmidt, Bernhard
A1  - Stobbe, P.
T1  - Optimization of the geometry of porous SiC ceramic filtering modules using numerical methods
JF  - Developments in porous, biological and geopolymer ceramics : a collection of papers presented at the 31st International Conference on Advanced Ceramics and Composites, January 21 - 26, 2007, Daytona Beach, Florida ; [papers presented at the Symposium on Porous Ceramics: Novel Developments and Applications] / ed.: Manuel Brito ... Vol. ed.: Jonathan Salem ... The American Ceramics Society
Y1  - 2008
SN  - 9780470196403
N1  - Ceramic engineering and science proceedings ; 28,9
SP  - 95
EP  - 104
PB  - Wiley
CY  - Hoboken, NJ
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - May, Martin
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Analysis of volumetric solar radiation absorbers made of wire meshes
T2  - AIP Conference Proceedings
Y1  - 2019
U6  - https://doi.org/10.1063/1.5117521
SN  - 0094243X
VL  - 2126
SP  - 030009-1
EP  - 030009-6
ER  - 
TY  - CHAP
A1  - Breitbach, Gerd
A1  - Alexopoulos, Spiros
A1  - Hoffschmidt, Bernhard
T1  - Fluid flow in porous ceramic multichannel crossflower filter modules
Y1  - 2007
PB  - COMSOL Inc.
CY  - Burlington, Mass.
ER  -