TY  - CHAP
A1  - Sattler, Johannes Christoph
A1  - Chico Caminos, Ricardo Alexander
A1  - Ürlings, Nicolas
A1  - Dutta, Siddharth
A1  - Ruiz, Victor
A1  - Kalogirou, Soteris
A1  - Ktistis, Panayiotis
A1  - Agathokleous, Rafaela
A1  - Jung, Christian
A1  - Alexopoulos, Spiros
A1  - Atti, Vikrama Naga Babu
A1  - Teixeira Boura, Cristiano José
A1  - Herrmann, Ulf
T1  - Operational experience and behaviour of a parabolic trough collector system with concrete thermal energy storage for process steam generation in Cyprus
T2  - AIP Conference Proceedings
N2  - As part of the transnational research project EDITOR, a parabolic trough collector system (PTC) with concrete thermal energy storage (C-TES) was installed and commissioned in Limassol, Cyprus. The system is located on the premises of the beverage manufacturer KEAN Soft Drinks Ltd. and its function is to supply process steam for the factory's pasteurisation process [1]. Depending on the factory's seasonally varying capacity for beverage production, the solar system delivers between 5 and 25 % of the total steam demand. In combination with the C-TES, the solar plant can supply process steam on demand before sunrise or after sunset. Furthermore, the C-TES compensates the PTC during the day in fluctuating weather conditions. The parabolic trough collector as well as the control and oil handling unit is designed and manufactured by Protarget AG, Germany. The C-TES is designed and produced by CADE Soluciones de Ingeniería, S.L., Spain. In the focus of this paper is the description of the operational experience with the PTC, C-TES and boiler during the commissioning and operation phase. Additionally, innovative optimisation measures are presented.
Y1  - 2020
U6  - https://doi.org/10.1063/5.0029278
N1  - SOLARPACES 2019: International Conference on Concentrating Solar Power and Chemical Energy Systems, 1–4 October 2019, Daegu, South Korea
IS  - 2303
SP  - 140004-1
EP  - 140004-10
ER  - 
TY  - JOUR
A1  - Mosset, Jean-Baptiste
A1  - Devroede, Olivier
A1  - Krieguer, Magalie
A1  - Rey, M.
A1  - Vieira, J.-M.
A1  - Jung, J. H.
A1  - Kuntner, Claudia
A1  - Streun, Matthias
A1  - Ziemons, Karl
A1  - Auffray, Etiennette
A1  - Sempere-Roldan, P.
A1  - Lecoq, Paul
A1  - Bruyndonckx, Peter
A1  - Loude, Jean-François
A1  - Tavernier, Stefaan
A1  - Morel, Christian
T1  - Development of an optimized LSO/LuYAP phoswich detector head for the Lausanne ClearPET demonstrator
JF  - IEEE Transactions on Nuclear Science
N2  - This paper describes the LSO/LuYAP phoswich detector head developed for the ClearPET small animal PET scanner demonstrator that is under construction in Lausanne within the Crystal Clear Collaboration. The detector head consists of a dual layer of 8×8 LSO and LuYAP crystal arrays coupled to a multi-anode photomultiplier tube (Hamamatsu R7600-M64). Equalistion of the LSO/LuYAP light collection is obtained through partial attenuation of the LSO scintillation light using a thin aluminum deposit of 20-35 nm on LSO and appropriate temperature regulation of the phoswich head between 30°C to 60°C. At 511keV, typical FWHM energy resolutions of the pixels of a phoswich head amounts to (28±2)% for LSO and (25±2)% for LuYAP. The LSO versus LuYAP crystal identification efficiency is better than 98%. Six detector modules have been mounted on a rotating gantry. Axial and tangential spatial resolutions were measured up to 4 cm from the scanner axis and compared to Monte Carlo simulations using GATE. FWHM spatial resolution ranges from 1.3 mm on axis to 2.6 mm at 4 cm from the axis.
Y1  - 2006
SN  - 0018-9499
VL  - 53
IS  - 1
SP  - 25
EP  - 29
ER  -