TY  - JOUR
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Reisert, Steffen
A1  - Schubert, J.
A1  - Zander, W.
A1  - Begoyan, V. K.
A1  - Buniatyan, V. V.
A1  - Schöning, Michael Josef
T1  - Chemical sensors based on a high-k perovskite oxide of barium strontium titanate
JF  - Procedia Engineering
N2  - High-k perovskite oxide of barium strontium titanate (BST) represents a very attractive multi-functional transducer material for the development of (bio-)chemical sensors for liquids. In this work, BST films have been applied as a sensitive transducer material for a label-free detection of adsorbed charged macromolecules (positively charged polyelectrolytes) and concentration of hydrogen peroxide vapor as well as protection insulator layer for a contactless electrolyte-conductivity sensor. The experimental results of characterization of individual sensors are presented. Special emphasis is devoted towards the development of a capacitively-coupled contactless electrolyte-conductivity sensor.
KW  - barium strontium titanate
KW  - high-k material
KW  - contactless conductivity sensor
KW  - multi-functional material
KW  - hydrogen peroxide
Y1  - 2014
U6  - https://doi.org/10.1016/j.proeng.2014.11.258
SN  - 1877-7058
N1  - EUROSENSORS 2014 ; European Conference on Solid-State Transducers <28, 2014>
VL  - 87
SP  - 28
EP  - 31
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Siqueira, José R. Jr.
A1  - Abouzar, Maryam H.
A1  - Bäcker, Matthias
A1  - Zucolotto, Valtencir
A1  - Poghossian, Arshak
A1  - Oliveira, Osvaldo N. Jr.
A1  - Schöning, Michael Josef
T1  - Carbon nanotubes in nanostructured films: Potential application as amperometric and potentiometric field-effect (bio-)chemical sensors
JF  - physica status solidi (a) . 206 (2009), H. 3
Y1  - 2009
SN  - 1862-6319
N1  - Special Issue: Engineering of Functional Interfaces (EnFI 08)
SP  - 462
EP  - 467
PB  - Wiley
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Krischer, M.
A1  - Leinhos, Marcel
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - An application of field-effect sensors for in-situ monitoring of degradation of biopolymers
JF  - Sensors and actuators B: Chemical
N2  - The characterization of the degradation kinetics of biodegradable polymers is mandatory with regard to their proper application. In the present work, polymer-modified electrolyte–insulator–semiconductor (PMEIS) field-effect sensors have been applied for in-situ monitoring of the pH-dependent degradation kinetics of the commercially available biopolymer poly(d,l-lactic acid) (PDLLA) in buffer solutions from pH 3 to pH 13. PDLLA films of 500 nm thickness were deposited on the surface of an Al–p-Si–SiO2–Ta2O5 structure from a polymer solution by means of spin-coating method. The PMEIS sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. A faster degradation has been observed for PDLLA films exposed to alkaline solutions (pH 9, pH 11 and pH 13).
Y1  - 2015
U6  - https://doi.org/10.1016/j.snb.2014.10.058
SN  - 1873-3077 (E-Journal); 0925-4005 (Print)
VL  - 207, Part B
SP  - 954
EP  - 959
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Leinhos, Marcel
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Characterization of biodegradable polymers with capacitive field-effect sensors
JF  - Sensors and actuators B: Chemical
N2  - In vitro studies of the degradation kinetic of biopolymers are essential for the design and optimization of implantable biomedical devices. In the presented work, a field-effect capacitive sensor has been applied for the real-time and in situ monitoring of degradation processes of biopolymers for the first time. The polymer-covered field-effect sensor is, in principle, capable to detect any changes in bulk, surface and interface properties of the polymer induced by degradation processes. The feasibility of this approach has been experimentally proven by using the commercially available biomedical polymer poly(D,L-lactic acid) (PDLLA) as a model system. PDLLA films of different thicknesses were deposited on the Ta₂O₅-gate surface of the field-effect structure from a polymer solution by means of spin-coating method. The polymer-modified field-effect sensors have been characterized by means of capacitance–voltage and impedance-spectroscopy method. The degradation of the PDLLA was accelerated by changing the degradation medium from neutral (pH 7.2) to alkaline (pH 9) condition, resulting in drastic changes in the capacitance and impedance spectra of the polymer-modified field-effect sensor.
KW  - Impedance spectroscopy
KW  - C–V method
KW  - Real-time monitoring
KW  - Poly(d,l-lacticacid)
KW  - (Bio)degradation
KW  - Field-effect sensor
Y1  - 2012
U6  - https://doi.org/10.1016/j.snb.2012.07.099
SN  - 0925-4005
N1  - Part of special issue "Selected Papers from the 14th International Meeting on Chemical Sensors"
VL  - 187
SP  - 2
EP  - 7
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Schusser, Sebastian
A1  - Krischer, M.
A1  - Molin, D. G. M.
A1  - Akker, N. M. S. van den
A1  - Bäcker, Matthias
A1  - Poghossian, Arshak
A1  - Schöning, Michael Josef
T1  - Sensor System for in-situ and Real-time Monitoring of Polymer (bio) degradation
JF  - Procedia Engineering
N2  - A sensor system for investigating (bio)degradationprocesses of polymers is presented. The system utilizes semiconductor field-effect sensors and is capable of monitoring the degradation process in-situ and in real-time. The degradation of the polymer poly(d,l-lactic acid) is exemplarily monitored in solutions with different pH value, pH-buffer solution containing the model enzyme lipase from Rhizomucormiehei and cell-culture medium containing supernatants from stimulated and non-stimulated THP-1-derived macrophages mimicking activation of the immune system.
Y1  - 2015
U6  - https://doi.org/10.1016/j.proeng.2015.08.815
SN  - 1877-7058
N1  - Eurosensors 2015
VL  - 120
SP  - 948
EP  - 951
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Poghossian, Arshak
A1  - Abouzar, Maryam H.
A1  - Razavi, A.
A1  - Bäcker, Matthias
A1  - Bijnens, N.
A1  - Williams, O. A.
A1  - Haenen, K.
A1  - Moritz, W.
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Nanocrystalline-diamond thin films with high pH and penicillin sensitivity prepared on a capacitive Si–SiO2 structure
JF  - Electrochimica Acta. 54 (2009), H. 25
Y1  - 2009
SN  - 0013-4686
SP  - 5981
EP  - 5985
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Delle, L.
A1  - Poghossian, Arshak
A1  - Biselli, Manfred
A1  - Zang, Werner
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Electrochemical sensor array for bioprocess monitoring
JF  - Electrochimica Acta (2011)
Y1  - 2011
VL  - 56
IS  - 26
SP  - 9673
EP  - 9678
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Raue, Markus
A1  - Schusser, Sebastian
A1  - Jeitner, C.
A1  - Breuer, L.
A1  - Wagner, P.
A1  - Poghossian, Arshak
A1  - Förster, Arnold
A1  - Mang, Thomas
A1  - Schöning, Michael Josef
T1  - Microfluidic chip with integrated microvalves based on temperature- and pH-responsive hydrogel thin films
JF  - Physica Status Solidi  (a)
N2  - Two types of microvalves based on temperature-responsive poly(N-isopropylacrylamide) (PNIPAAm) and pH-responsive poly(sodium acrylate) (PSA) hydrogel films have been developed and tested. The PNIPAAm and PSA hydrogel films were prepared by means of in situ photopolymerization directly inside the fluidic channel of a microfluidic chip fabricated by combining Si and SU-8 technologies. The swelling/shrinking properties and height changes of the PNIPAAm and PSA films inside the fluidic channel were studied at temperatures of deionized water from 14 to 36 °C and different pH values (pH 3–12) of Titrisol buffer, respectively. Additionally, in separate experiments, the lower critical solution temperature (LCST) of the PNIPAAm hydrogel was investigated by means of a differential scanning calorimetry (DSC) and a surface plasmon resonance (SPR) method. Mass-flow measurements have shown the feasibility of the prepared hydrogel films to work as an on-chip integrated temperature- or pH-responsive microvalve capable to switch the flow channel on/off.
Y1  - 2012
U6  - https://doi.org/10.1002/pssa.201100763
SN  - 1862-6319
VL  - 209
IS  - 5
SP  - 839
EP  - 845
PB  - Wiley-VCH
CY  - Weinheim
ER  - 
TY  - JOUR
A1  - Bäcker, Matthias
A1  - Kowollik, Silvia
A1  - Schnitzler, Thomas
A1  - Wang, J.
A1  - Poghossian, Arshak
A1  - Zang, Werner
A1  - Biselli, Manfred
A1  - Wagner, P.
A1  - Schöning, Michael Josef
T1  - Entwicklung eines festkörperbasierten Sensorsystems für die Bioprozessautomatisierung
JF  - 9. Dresdner Sensor-Symposium : Dresden, 07.-09. Dezember 2009 / Gerlach, Gerald ; Hauptmann, Peter [Hrsg.]
Y1  - 2009
SN  - 978-3-941298-44-6
N1  - Dresdner Sensor-Symposium ; (9, 2009, Dresden)
SP  - 197
EP  - 200
PB  - TUDpress
CY  - Dresden
ER  - 
TY  - CHAP
A1  - Huck, Christina
A1  - Poghossian, Arshak
A1  - Bäcker, Matthias
A1  - Zander, W.
A1  - Schubert, J.
A1  - Sukoyan, L. H.
A1  - Begoyan, V.
A1  - Buniatyan, V. V.
A1  - Wagner, Patrick
A1  - Schöning, Michael Josef
T1  - Chemische Sensoren mit Bariumstrontiumtitanat als funktionelle Schicht zur Multiparameterdetektion
T2  - 11. Dresdner Sensor-Symposium : 9.-11.12.2013
Y1  - 2013
SN  - 978-3-9813484-5-3
SP  - 368
EP  - 372
ER  -