TY - CHAP A1 - Haugg, Albert Thomas A1 - Kreyer, Jörg A1 - Kemper, Hans A1 - Hatesuer, Katerina A1 - Esch, Thomas T1 - Heat exchanger for ORC. adaptability and optimisation potentials T2 - IIR International Rankine 2020 Conference N2 - The recovery of waste heat requires heat exchangers to extract it from a liquid or gaseous medium into another working medium, a refrigerant. In Organic Rankine Cycles (ORC) on Combustion Engines there are two major heat sources, the exhaust gas and the water/glycol fluid from the engine’s cooling circuit. A heat exchanger design must be adapted to the different requirements and conditions resulting from the heat sources, fluids, system configurations, geometric restrictions, and etcetera. The Stacked Shell Cooler (SSC) is a new and very specific design of a plate heat exchanger, created by AKG, which allows with a maximum degree of freedom the optimization of heat exchange rate and the reduction of the related pressure drop. This optimization in heat exchanger design for ORC systems is even more important, because it reduces the energy consumption of the system and therefore maximizes the increase in overall efficiency of the engine. Y1 - 2020 U6 - https://doi.org/10.18462/iir.rankine.2020.1224 N1 - IIR International Rankine 2020 Conference - Heating, Cooling, Power Generation. Glasgow, 2020. ER - TY - CHAP A1 - Huth, Thomas A1 - Elsen, Olaf A1 - Hartwig, Christoph A1 - Esch, Thomas T1 - Innovative modular valve trains for 2015 - logistic benefits by EMVT T2 - IFAC Proceedings Volumes, Volume 39, Issue 3 N2 - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary. Y1 - 2006 U6 - https://doi.org/10.3182/20060517-3-FR-2903.00172 N1 - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing" SP - 315 EP - 320 PB - Elsevier CY - Amsterdam ER - TY - CHAP A1 - Weiss, Alexander A1 - Abanteriba, Sylvester A1 - Esch, Thomas T1 - Investigation of Flow Separation Inside a Conical Rocket Nozzle With the Aid of an Annular Cross Flow T2 - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B N2 - Flow separation is a phenomenon that occurs in all kinds of supersonic nozzles sometimes during run-up and shut-down operations. Especially in expansion nozzles of rocket engines with large area ratio, flow separation can trigger strong side loads that can damage the structure of the nozzle. The investigation presented in this paper seeks to establish measures that may be applied to alter the point of flow separation. In order to achieve this, a supersonic nozzle was placed at the exit plane of the conical nozzle. This resulted in the generation of cross flow surrounding the core jet flow from the conical nozzle. Due to the entrainment of the gas stream from the conical nozzle the pressure in its exit plane was found to be lower than that of the ambient. A Cold gas instead of hot combustion gases was used as the working fluid. A mathematical simulation of the concept was validated by experiment. Measurements confirmed the simulation results that due to the introduction of a second nozzle the pressure in the separated region of the conical nozzle was significantly reduced. It was also established that the boundary layer separation inside the conical nozzle was delayed thus allowing an increased degree of overexpansion. The condition established by the pressure measurements was also demonstrated qualitatively using transparent nozzle configurations. Y1 - 2007 SN - 0-7918-4288-6 U6 - https://doi.org/10.1115/FEDSM2007-37387 N1 - Proceedings of the ASME/JSME 2007 5th Joint Fluids Engineering Conference. Volume 1: Symposia, Parts A and B. San Diego, California, USA. July 30–August 2, 2007 SP - 1861 EP - 1871 PB - American Society of Mechanical Engineers (ASME) CY - New York ER - TY - PAT A1 - Salber, Wolfgang A1 - Pischinger, Martin A1 - Esch, Thomas A1 - Hagen, Jürgen T1 - Kaltstartverfahren für eine drosselfreie Mehrzylinder-Kolbenbrennkraftmaschine N2 - Die Erfindung betrifft ein Kaltstartverfahren für eine Mehrzylinder-Kolbenbrennkraftmaschine mit Anlasser und einer Motorsteuerung zur Ansteuerung von Kraftstoffeinspritzeinrichtungen, Zündung und voll variabel elektromagnetisch betätigbaren Gaswechselventilen an den einzelnen Zylindern, bei dem die Kurbelwelle über den Anlasser gedreht wird und zum Start für wenigstens einen Zylinder die dazugehörigen Gaswechselventile, die Kraftstoffeinspritzeinrichtung und die Zündung in einem vorgegebenen Taktzyklus angesteuert werden und zwar in den ersten Arbeitszyklen mit "Spätem Einlaß Öffnen". Y1 - 2000 N1 - Patent DE000019830974B4 2005.11.03 ER - TY - JOUR A1 - Esch, Thomas A1 - Pischinger, M. A1 - Göbel, T. T1 - Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung JF - Motortechnische Zeitschrift. 57 (1996), H. 2 Y1 - 1996 SN - 0024-8525 SP - 106 EP - 115 ER - TY - JOUR A1 - Esch, Thomas A1 - Pischinger, M. A1 - Hagen, J. A1 - Salber, W. T1 - Möglichkeiten der ottomotorischen Prozeßführung bei Verwendung des elektromechanischen Ventiltriebs Y1 - 1998 N1 - Konferenz-Einzelbericht : 7. Aachener Kolloquium Fahrzeug- u. Motorentechnik 05.-07. Okt. 1998, Bd. 2 SP - 987 EP - 1015 ER - TY - BOOK A1 - Esch, Thomas A1 - Appel, Wolfgang A1 - Höpke, Friedrich T1 - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten ; mit 35 Tabellen / Appel, Wolfgang ; Höpke, Friedrich ... Esch, Thomas [u.a.] 5., vollst. überarb. Aufl. Y1 - 2008 SN - 978-3-8348-0374-0 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - BOOK A1 - Appel, Wolfgang A1 - Brähler, Hermann A1 - Dahlhaus, Ulrich A1 - Esch, Thomas A1 - Kopp, Stephan A1 - Rhein, Bernd T1 - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 6., überarb. Aufl. Y1 - 2010 SN - 978-3-8348-9757-2 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - BOOK A1 - Appel, Wolfgang A1 - Brähler, Hermann A1 - Breuer, Stefan A1 - Dahlhaus, Ulrich A1 - Esch, Thomas A1 - Hoepke, Erich A1 - Kopp, Stephan A1 - Rhein, Bernd T1 - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 7., überarb. u. erw. Aufl. Y1 - 2013 SN - 978-3-8348-2224-6 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - JOUR A1 - Esch, Thomas T1 - Optimized design of the lubrication system of modern combustion engines. Verbesserte Ausführung von Schmierungssystemen bei modernen Verbrennungsmotoren Y1 - 1991 SN - 0148-7191 U6 - https://doi.org/10.4271/912407 N1 - Konferenz-Einzelbericht : SAE technical papers / Society of Automotive Engineers, Paper-Nr. 912407 SP - 1 EP - 11 ER -