TY - CHAP A1 - Haugg, Albert Thomas A1 - Kreyer, Jörg A1 - Kemper, Hans A1 - Hatesuer, Katerina A1 - Esch, Thomas T1 - Heat exchanger for ORC. adaptability and optimisation potentials T2 - IIR International Rankine 2020 Conference N2 - The recovery of waste heat requires heat exchangers to extract it from a liquid or gaseous medium into another working medium, a refrigerant. In Organic Rankine Cycles (ORC) on Combustion Engines there are two major heat sources, the exhaust gas and the water/glycol fluid from the engine’s cooling circuit. A heat exchanger design must be adapted to the different requirements and conditions resulting from the heat sources, fluids, system configurations, geometric restrictions, and etcetera. The Stacked Shell Cooler (SSC) is a new and very specific design of a plate heat exchanger, created by AKG, which allows with a maximum degree of freedom the optimization of heat exchange rate and the reduction of the related pressure drop. This optimization in heat exchanger design for ORC systems is even more important, because it reduces the energy consumption of the system and therefore maximizes the increase in overall efficiency of the engine. Y1 - 2020 U6 - http://dx.doi.org/10.18462/iir.rankine.2020.1224 N1 - Conference: IIR International Rankine 2020 Conference - Heating, Cooling, Power Generation. Glasgow, 2020. ER - TY - CHAP A1 - Huth, Thomas A1 - Elsen, Olaf A1 - Hartwig, Christoph A1 - Esch, Thomas T1 - Innovative modular valve trains for 2015 - logistic benefits by EMVT T2 - IFAC Proceedings Volumes, Volume 39, Issue 3 N2 - In this paper the way to a 5-day-car with respect to a modular valve train systems for spark ignited combustion engines is shown. The necessary product diversity is shift from mechanical or physical components to software components. Therefore, significant improvements of logistic indicators are expected and shown. The working principle of a camless cylinder head with respect to an electromagnetical valve train (EMVT) is explained and it is demonstrated that shifting physical diversity to software is feasible. The future design of combustion engine systems including customisation can be supported by a set of assistance tools which is shown exemplary. Y1 - 2006 U6 - http://dx.doi.org/10.3182/20060517-3-FR-2903.00172 N1 - Part of special issue "12th IFAC Symposium on Information Control Problems in Manufacturing" SP - 315 EP - 320 PB - Elsevier CY - Amsterdam ER - TY - JOUR A1 - Fayyazi, Mojgan A1 - Sardar, Paramjotsingh A1 - Thomas, Sumit Infent A1 - Daghigh, Roonak A1 - Jamali, Ali A1 - Esch, Thomas A1 - Kemper, Hans A1 - Langari, Reza A1 - Khayyam, Hamid T1 - Artificial intelligence/machine learning in energy management systems, control, and optimization of hydrogen fuel cell vehicles N2 - Environmental emissions, global warming, and energy-related concerns have accelerated the advancements in conventional vehicles that primarily use internal combustion engines. Among the existing technologies, hydrogen fuel cell electric vehicles and fuel cell hybrid electric vehicles may have minimal contributions to greenhouse gas emissions and thus are the prime choices for environmental concerns. However, energy management in fuel cell electric vehicles and fuel cell hybrid electric vehicles is a major challenge. Appropriate control strategies should be used for effective energy management in these vehicles. On the other hand, there has been significant progress in artificial intelligence, machine learning, and designing data-driven intelligent controllers. These techniques have found much attention within the community, and state-of-the-art energy management technologies have been developed based on them. This manuscript reviews the application of machine learning and intelligent controllers for prediction, control, energy management, and vehicle to everything (V2X) in hydrogen fuel cell vehicles. The effectiveness of data-driven control and optimization systems are investigated to evolve, classify, and compare, and future trends and directions for sustainability are discussed. KW - optimization system KW - intelligent control KW - fuel cell vehicle KW - machine learning KW - artificial intelligence KW - intelligent energy management Y1 - 2023 U6 - http://dx.doi.org/10.3390/su15065249 N1 - This article belongs to the Special Issue "Circular Economy and Artificial Intelligence" VL - 15 IS - 6 SP - 38 PB - MDPI CY - Basel ER - TY - JOUR A1 - Esch, Thomas A1 - Göbel, T. T1 - Gemischbildung bei drosselfreier Laststeuerung von Ottomotoren JF - Motortechnische Zeitschrift. 54 (1993), H. 12 Y1 - 1993 SN - 0024-8525 SP - 616 EP - 618 ER - TY - JOUR A1 - Esch, Thomas A1 - Salber, Wolfgang A1 - Wolters, Peter A1 - Geiger, José A1 - Dilthey, Jochen T1 - Synergies of variable valve actuation and direct injection JF - Direct injection SI engine technology 2002 : [SAE 2002 world congress, Detroit, Michigan, USA, March 4 - 7, 2002]. Y1 - 2002 SN - 0-7680-0961-8 N1 - Konferenz-Einzelbericht SP - 45 EP - 53 PB - Society of Automotive Engineers CY - Warrendale, Pa ER - TY - JOUR A1 - Esch, Thomas A1 - Wolters, P. A1 - Salber, W. A1 - Geiger, J. T1 - Variable Ventilsteuerung und Direkteinspritzung - vom Wettbewerb zur Synergie JF - Motor und Umwelt 2001, Internal Combustion Engine Versus Fuel Cell - Potential and Limitations as Automotive Power Sources, Verbrennungsmotor versus Brennstoffzelle - Potenziale und Grenzen für den Automobilantrieb, Proc., Graz, AT, 6.-7. Sep, 2001 Y1 - 2001 N1 - Konferenz-Einzelbericht SP - 183 EP - 206 ER - TY - JOUR A1 - Esch, Thomas A1 - Salber, W. A1 - Kemper, Hans A1 - Staay, F. van der T1 - Der elektromechanische Ventiltrieb - Systembaustein für zukünftige Antriebskonzepte, Teil 2. JF - Motortechnische Zeitschrift (MTZ). Y1 - 2001 U6 - http://dx.doi.org/10.1007/bf03227081 SN - 0024-8525 VL - 62 IS - 1 SP - 44 EP - 55 PB - Springer Nature CY - Basel ER - TY - JOUR A1 - Esch, Thomas A1 - Salber, W. A1 - Kemper, Hans A1 - Staay, F. van der T1 - Der elektromechanische Ventiltrieb - Systembaustein für zukünftige Antriebskonzepte, Teil 1. JF - Motortechnische Zeitschrift (MTZ). Y1 - 2000 U6 - http://dx.doi.org/10.1007/bf03227081 SN - 0024-8525 VL - 61 IS - 12 SP - 826 EP - 836 PB - Springer Nature CY - Basel ER - TY - JOUR A1 - Esch, Thomas A1 - Göbel, T. A1 - Pischinger, M. T1 - Variable Ventilsteuerung - Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung JF - Forschungsberichte Verbrennungskraftmaschinen. 578 (1995) Y1 - 1995 N1 - Report SP - 1 EP - 42 ER - TY - JOUR A1 - Esch, Thomas A1 - Pischinger, M. A1 - Hagen, J. A1 - Salber, W. T1 - Möglichkeiten der ottomotorischen Prozeßführung bei Verwendung des elektromechanischen Ventiltriebs Y1 - 1998 N1 - Konferenz-Einzelbericht : 7. Aachener Kolloquium Fahrzeug- u. Motorentechnik 05.-07. Okt. 1998, Bd. 2 SP - 987 EP - 1015 ER - TY - JOUR A1 - Esch, Thomas A1 - Pischinger, M. A1 - Göbel, T. T1 - Luft- und Kraftstoffzumessung bei Ottomotoren mit variabler Ventilsteuerung JF - Motortechnische Zeitschrift. 57 (1996), H. 2 Y1 - 1996 SN - 0024-8525 SP - 106 EP - 115 ER - TY - JOUR A1 - Esch, Thomas T1 - Optimized design of the lubrication system of modern combustion engines. Verbesserte Ausführung von Schmierungssystemen bei modernen Verbrennungsmotoren Y1 - 1991 SN - 0148-7191 U6 - http://dx.doi.org/10.4271/912407 N1 - Konferenz-Einzelbericht : SAE technical papers / Society of Automotive Engineers, Paper-Nr. 912407 SP - 1 EP - 11 ER - TY - JOUR A1 - Esch, Thomas A1 - Saupe, T. A1 - Fahl, E. A1 - Koch, F. T1 - Verbrauchseinsparung durch bedarfsgerechten Antrieb der Nebenaggregate JF - Motortechnische Zeitschrift. 55 (1994), H. 7/8 Y1 - 1994 SN - 0024-8525 SP - 416 EP - 431 ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Verbrennungsmotoren. - 7. Aufl. Y1 - 2005 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Technische Thermodynamik Y1 - 2005 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Verbrennungsmotoren. - 6. Aufl., [Umdruck] Y1 - 2005 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Raumfahrtantriebe. - 6. Aufl., [Umdruck] Y1 - 2005 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Dynamik der Fahrzeuge : Längsdynamik. - 5. Aufl., [Umdruck]. - (Angewandte Thermodynamik und Verbrennungstechnik) Y1 - 2006 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Verbrennungsmotoren. - 8. Aufl., [Umdruck]. - (Angewandte Thermodynamik und Verbrennungstechnik) Y1 - 2006 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Verbrennungstechnik. - 6. Aufl., [Umdruck]. - (Angewandte Thermodynamik und Verbrennungstechnik) Y1 - 2007 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas A1 - Appel, Wolfgang A1 - Höpke, Friedrich T1 - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten ; mit 35 Tabellen / Appel, Wolfgang ; Höpke, Friedrich ... Esch, Thomas [u.a.] 5., vollst. überarb. Aufl. Y1 - 2008 SN - 978-3-8348-0374-0 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - JOUR A1 - Esch, Thomas A1 - Funke, Harald A1 - Roosen, Peter A1 - Jarolimek, Ulrich T1 - Biogene Automobilkraftstoffe in der allgemeinen Luftfahrt JF - Motortechnische Zeitschrift (MTZ). Y1 - 2011 SN - 0024-8525 U6 - http://dx.doi.org/10.1365/s35146-011-0013-7 VL - 72 IS - 1 SP - 54 EP - 59 PB - Springer Nature CY - Basel ER - TY - JOUR A1 - Esch, Thomas T1 - Trends in der Nutzfahrzeugantriebstechnik JF - Motortechnische Zeitschrift (MTZ) Y1 - 2010 SN - 0024-8525 U6 - http://dx.doi.org/10.1007/bf03225608 VL - 71 IS - 10 SP - 652 EP - 658 PB - Springer Nature CY - Basel ER - TY - JOUR A1 - Esch, Thomas A1 - Funke, Harald A1 - Roosen, Peter A1 - Jarolimek, Ulrich T1 - Biogenic Vehicle Fuels in General Aviation Aircrafts JF - MTZ worldwide. 72 (2011), H. 1 Y1 - 2011 N1 - recherchierbar für Angehörige der FH Aachen SP - 38 EP - 43 PB - Springer Automotive Media CY - Wiesbaden ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. Bd. 1 Y1 - 2007 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. Bd. 2 Y1 - 2007 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 2. Aufl. Bd. 2 Y1 - 2012 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Verbrennungstechnik : Vorlesungsumdruck. 7. Aufl. Y1 - 2008 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Verbrennungstechnik : Vorlesungsumdruck. 8. Aufl. Y1 - 2011 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Esch, Thomas T1 - Raumfahrtantriebe. 7. Aufl., [Umdruck] Y1 - 2009 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ER - TY - BOOK A1 - Appel, Wolfgang A1 - Brähler, Hermann A1 - Dahlhaus, Ulrich A1 - Esch, Thomas A1 - Kopp, Stephan A1 - Rhein, Bernd T1 - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 6., überarb. Aufl. Y1 - 2010 SN - 978-3-8348-9757-2 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - BOOK A1 - Appel, Wolfgang A1 - Brähler, Hermann A1 - Breuer, Stefan A1 - Dahlhaus, Ulrich A1 - Esch, Thomas A1 - Hoepke, Erich A1 - Kopp, Stephan A1 - Rhein, Bernd T1 - Nutzfahrzeugtechnik : Grundlagen, Systeme, Komponenten. 7., überarb. u. erw. Aufl. Y1 - 2013 SN - 978-3-8348-2224-6 PB - Vieweg + Teubner CY - Wiesbaden ER - TY - RPRT A1 - Esch, Thomas A1 - Eickmann, Matthias A1 - Coussement, Axel A1 - Kalbhenn, Hartmut T1 - Wasserstoffspezifische Abstimmung der Ladungswechselvorgänge eines Verbrennungsmotors mit Direkteinblasung : Schlussbericht für das Forschungsvorhaben ; Kurztitel: HydI - Hydrogen direct injection ; Förderperiode 01.07.2008 - 31.12.2011 / FH Aachen, Thermodynamik und Verbrennungstechnik KW - Wasserstoff KW - Direkteinblasung KW - vollvariabler Ventilbetrieb KW - Verbrennungsmotor KW - Ladungswechsel Y1 - 2013 CY - Aachen ER - TY - CHAP A1 - Busse, Daniel A1 - Esch, Thomas A1 - Muntaniol, Roman T1 - Thermal management in E-carsharing vehicles - preconditioning concepts of passenger compartments T2 - E-Mobility in Europe : trends and good practice N2 - The issue of thermal management in electric vehicles includes the topics of drivetrain cooling and heating, interior temperature, vehicle body conditioning and safety. In addition to the need to ensure optimal thermal operating conditions of the drivetrain components (drive motor, battery and electrical components), thermal comfort must be provided for the passengers. Thermal comfort is defined as the feeling which expresses the satisfaction of the passengers with the ambient conditions in the compartment. The influencing factors on thermal comfort are the temperature and humidity as well as the speed of the indoor air and the clothing and the activity of the passengers, in addition to the thermal radiation and the temperatures of the interior surfaces. The generation and the maintenance of free visibility (ice- and moisture-free windows) count just as important as on-demand heating and cooling of the entire vehicle. A Carsharing climate concept of the innovative ec2go vehicle stipulates and allows for only seating areas used by passengers to be thermally conditioned in a close-to-body manner. To enable this, a particular feature has been added to the preconditioning of the Carsharing electric vehicle during the electric charging phase at the parking station. KW - Carsharing KW - Thermal management KW - Thermal comfort KW - Electrical vehicle KW - Passenger compartment Y1 - 2015 SN - 978-3-319-13193-1 U6 - http://dx.doi.org/10.1007/978-3-319-13194-8_18 SP - 327 EP - 343 PB - Springer CY - Cham [u.a.] ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 2. Aufl. Bd. 1 Y1 - 2013 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ET - 2. Aufl. ER - TY - BOOK A1 - Esch, Thomas T1 - Verbrennungsmotoren Y1 - 2015 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ET - 11. Aufl., [Umdruck] ER - TY - BOOK A1 - Esch, Thomas T1 - Verbrennungsmotoren Y1 - 2013 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ET - 10. Aufl., [Umdruck] ER - TY - BOOK A1 - Esch, Thomas T1 - Experimentelle Untersuchungen an Antriebssystemen von Kraft-, Luft- und Raumfahrzeugen : Vorlesungsumdruck. 3. Aufl. Bd. 1 Y1 - 2015 PB - Fachhochschule Aachen, Lehr- und Forschungsgebiet Thermodynamik und Verbrennungstechnik CY - Aachen ET - 3. Aufl. ER - TY - RPRT A1 - Esch, Thomas A1 - Damm, Marc André A1 - Kalbhenn, Hartmut T1 - Auslegung und Simulation eines Hybridantriebs für den teilelektrischen Betrieb eines Luftfahrzeuges der allgemeinen Luftfahrt : Schlussbericht für das Forschungsvorhaben ; Förderperiode 01.07.2009 - 31.05.2012 T1 - HyFly ; Design and simulation of a partially electrified operatin of an aircraft of the general aviation Y1 - 2013 U6 - http://dx.doi.org/10.2314/GBV:780055411 N1 - Report-Nr.: 1709X08 CY - Aachen ; Hannover ER - TY - JOUR A1 - Khayyam, Hamid A1 - Jamali, Ali A1 - Bab-Hadiashar, Alireza A1 - Esch, Thomas A1 - Ramakrishna, Seeram A1 - Jalili, Mahdi A1 - Naebe, Minoo T1 - A Novel Hybrid Machine Learning Algorithm for Limited and Big Data Modeling with Application in Industry 4.0 JF - IEEE Access N2 - To meet the challenges of manufacturing smart products, the manufacturing plants have been radically changed to become smart factories underpinned by industry 4.0 technologies. The transformation is assisted by employment of machine learning techniques that can deal with modeling both big or limited data. This manuscript reviews these concepts and present a case study that demonstrates the use of a novel intelligent hybrid algorithms for Industry 4.0 applications with limited data. In particular, an intelligent algorithm is proposed for robust data modeling of nonlinear systems based on input-output data. In our approach, a novel hybrid data-driven combining the Group-Method of Data-Handling and Singular-Value Decomposition is adapted to find an offline deterministic model combined with Pareto multi-objective optimization to overcome the overfitting issue. An Unscented-Kalman-Filter is also incorporated to update the coefficient of the deterministic model and increase its robustness against data uncertainties. The effectiveness of the proposed method is examined on a set of real industrial measurements. Y1 - 2020 U6 - http://dx.doi.org/10.1109/ACCESS.2020.2999898 SN - 2169-3536 VL - 8 IS - Art. 9108222 SP - 111381 EP - 111393 PB - IEEE CY - New York, NY ER - TY - JOUR A1 - Khayyam, Hamid A1 - Jamali, Ali A1 - Bab-Hadiashar, Alireza A1 - Esch, Thomas A1 - Ramakrishna, Seeram A1 - Jalil, Mahdi A1 - Naebe, Minoo T1 - A Novel Hybrid Machine Learning Algorithm for Limited and Big Data Modelling with Application in Industry 4.0 JF - IEEE Access N2 - To meet the challenges of manufacturing smart products, the manufacturing plants have been radically changed to become smart factories underpinned by industry 4.0 technologies. The transformation is assisted by employment of machine learning techniques that can deal with modeling both big or limited data. This manuscript reviews these concepts and present a case study that demonstrates the use of a novel intelligent hybrid algorithms for Industry 4.0 applications with limited data. In particular, an intelligent algorithm is proposed for robust data modeling of nonlinear systems based on input-output data. In our approach, a novel hybrid data-driven combining the Group-Method of Data-Handling and Singular-Value Decomposition is adapted to find an offline deterministic model combined with Pareto multi-objective optimization to overcome the overfitting issue. An Unscented-Kalman-Filter is also incorporated to update the coefficient of the deterministic model and increase its robustness against data uncertainties. The effectiveness of the proposed method is examined on a set of real industrial measurements. Y1 - 2020 SN - 2169-3536 U6 - http://dx.doi.org/10.1109/ACCESS.2020.2999898 SP - 1 EP - 12 PB - IEEE CY - New York, NY ER - TY - JOUR A1 - Kreyer, Jörg A1 - Müller, Marvin A1 - Esch, Thomas T1 - A Calculation Methodology for Predicting Exhaust Mass Flows and Exhaust Temperature Profiles for Heavy-Duty Vehicles JF - SAE International Journal of Commercial Vehicles N2 - The predictive control of commercial vehicle energy management systems, such as vehicle thermal management or waste heat recovery (WHR) systems, are discussed on the basis of information sources from the field of environment recognition and in combination with the determination of the vehicle system condition. In this article, a mathematical method for predicting the exhaust gas mass flow and the exhaust gas temperature is presented based on driving data of a heavy-duty vehicle. The prediction refers to the conditions of the exhaust gas at the inlet of the exhaust gas recirculation (EGR) cooler and at the outlet of the exhaust gas aftertreatment system (EAT). The heavy-duty vehicle was operated on the motorway to investigate the characteristic operational profile. In addition to the use of road gradient profile data, an evaluation of the continuously recorded distance signal, which represents the distance between the test vehicle and the road user ahead, is included in the prediction model. Using a Fourier analysis, the trajectory of the vehicle speed is determined for a defined prediction horizon. To verify the method, a holistic simulation model consisting of several hierarchically structured submodels has been developed. A map-based submodel of a combustion engine is used to determine the EGR and EAT exhaust gas mass flows and exhaust gas temperature profiles. All simulation results are validated on the basis of the recorded vehicle and environmental data. Deviations from the predicted values are analyzed and discussed. Y1 - 2020 U6 - http://dx.doi.org/10.4271/02-13-02-0009 SN - 1946-3928 VL - 13 IS - 2 SP - 129 EP - 143 PB - SAE International CY - Warrendale, Pa. ER - TY - CHAP A1 - Kreyer, Jörg A1 - Müller, Marvin A1 - Esch, Thomas T1 - A Map-Based Model for the Determination of Fuel Consumption for Internal Combustion Engines as a Function of Flight Altitude T2 - Deutscher Luft- und Raumfahrtkongress 2019, „Luft- und Raumfahrt – technologische Brücke in die Zukunft“, Darmstadt, 30. September bis 2. Oktober 2019 Y1 - 2020 U6 - http://dx.doi.org/10.25967/490162 PB - Deutsche Gesellschaft für Luft- und Raumfahrt - Lilienthal-Oberth e.V CY - Bonn ER - TY - CHAP A1 - Finger, Felix A1 - Khalsa, R. A1 - Kreyer, Jörg A1 - Mayntz, Joscha A1 - Braun, Carsten A1 - Dahmann, Peter A1 - Esch, Thomas A1 - Kemper, Hans A1 - Schmitz, O. A1 - Bragard, Michael T1 - An approach to propulsion system modelling for the conceptual design of hybrid-electric general aviation aircraft T2 - Deutscher Luft- und Raumfahrtkongress 2019, 30.9.-2.10.2019, Darmstadt N2 - In this paper, an approach to propulsion system modelling for hybrid-electric general aviation aircraft is presented. Because the focus is on general aviation aircraft, only combinations of electric motors and reciprocating combustion engines are explored. Gas turbine hybrids will not be considered. The level of the component's models is appropriate for the conceptual design stage. They are simple and adaptable, so that a wide range of designs with morphologically different propulsive system architectures can be quickly compared. Modelling strategies for both mass and efficiency of each part of the propulsion system (engine, motor, battery and propeller) will be presented. Y1 - 2019 ER - TY - JOUR A1 - Funke, Harald A1 - Esch, Thomas A1 - Roosen, Petra T1 - Powertrain Adaptions for LPG Usage in General Aviation JF - MTZ worldwide N2 - In general aviation, too, it is desirable to be able to operate existing internal combustion engines with fuels that produce less CO₂ than Avgas 100LL being widely used today It can be assumed that, in comparison, the fuels CNG, LPG or LNG, which are gaseous under normal conditions, produce significantly lower emissions. Necessary propulsion system adaptations were investigated as part of a research project at Aachen University of Applied Sciences. Y1 - 2022 U6 - http://dx.doi.org/10.1007/s38313-021-0756-6 VL - 2022 IS - 83 SP - 58 EP - 62 PB - Springer Nature CY - Basel ER - TY - GEN A1 - Eickmann, Matthias A1 - Esch, Thomas A1 - Funke, Harald A1 - Abanteriba, Sylvester A1 - Roosen, Petra T1 - Biofuels in Aviation – Safety Implications of Bio-Ethanol Usage in General Aviation Aircraft N2 - Up in the clouds and above fuels and construction materials must be very carefully selected to ensure a smooth flight and touchdown. Out of around 38,000 single and dual-engined propeller aeroplanes, roughly a third are affected by a new trend in the fuel sector that may lead to operating troubles or even emergency landings: The admixture of bio-ethanol to conventional gasoline. Experiences with these fuels may be projected to alternative mixtures containing new components. Y1 - 2014 N1 - 2. International Conference of the Cluster of Excellence Tailor-Made Fuels from Biomass, Aachen 2013 ER - TY - PAT A1 - Schmitz, Günter A1 - Schebitz, Michael A1 - Esch, Thomas T1 - Aus der Ruhelage selbstanziehender elektromagnetischer Aktuator N2 - Elektromagnetischer Aktuator zur Betätigung eines Stellgliedes (2), mit wenigstens einem Elektromagneten (4) und einem mit dem Stellglied (2) verbundenen Anker (3), der gegen die Kraft einer Rückstellfeder (6) aus seiner Ruhelage in Richtung auf den Elektromagneten (4) bewegbar ist, mit einer Rückstellfeder (6), die eine nicht lineare, bezogen auf die Ruhelage des Ankers (3) progressiv ansteigende Kennlinie aufweist. Y1 - 1997 N1 - Patent DE000019529152B4 2005.12.29 ER - TY - PAT A1 - Salber, Wolfgang A1 - Pischinger, Martin A1 - Esch, Thomas A1 - Hagen, Jürgen T1 - Kaltstartverfahren für eine drosselfreie Mehrzylinder-Kolbenbrennkraftmaschine N2 - Die Erfindung betrifft ein Kaltstartverfahren für eine Mehrzylinder-Kolbenbrennkraftmaschine mit Anlasser und einer Motorsteuerung zur Ansteuerung von Kraftstoffeinspritzeinrichtungen, Zündung und voll variabel elektromagnetisch betätigbaren Gaswechselventilen an den einzelnen Zylindern, bei dem die Kurbelwelle über den Anlasser gedreht wird und zum Start für wenigstens einen Zylinder die dazugehörigen Gaswechselventile, die Kraftstoffeinspritzeinrichtung und die Zündung in einem vorgegebenen Taktzyklus angesteuert werden und zwar in den ersten Arbeitszyklen mit "Spätem Einlaß Öffnen". Y1 - 2000 N1 - Patent DE000019830974B4 2005.11.03 ER - TY - CHAP A1 - Schopen, Oliver A1 - Shabani, Bahman A1 - Esch, Thomas A1 - Kemper, Hans A1 - Shah, Neel ED - Rahim, S.A. ED - As'arry, A. ED - Zuhri, M.Y.M. ED - Harmin, M.Y. ED - Rezali, K.A.M. ED - Hairuddin, A.A. T1 - Quantitative evaluation of health management designs for fuel cell systems in transport vehicles T2 - 2nd UNITED-SAIG International Conference Proceedings N2 - Focusing on transport vehicles, mainly with regard to aviation applications, this paper presents compilation and subsequent quantitative evaluation of methods aimed at building an optimum integrated health management solution for fuel cell systems. The methods are divided into two different main types and compiled in a related scheme. Furthermore, different methods are analysed and evaluated based on parameters specific to the aviation context of this study. Finally, the most suitable method for use in fuel cell health management systems is identified and its performance and suitability is quantified. KW - aviation application KW - health management systems KW - fuel cell systems Y1 - 2022 N1 - 2nd UNITED-SAIG International Conference, 23-24 May 2022, Putrajaya, Malaysia SP - 1 EP - 3 ER - TY - CHAP A1 - Schopen, Oliver A1 - Kemper, Hans A1 - Esch, Thomas T1 - Development of a comparison methodology and evaluation matrix for electrically driven compressors in ICE and FC T2 - Proceedings of the 1st UNITED – Southeast Asia Automotive Interest Group (SAIG) International Conference N2 - In addition to electromobility and alternative drive systems, a focus is set on electrically driven compressors (EDC), with a high potential for increasing the efficiency of internal combustion engines (ICE) and fuel cells [01]. The primary objective is to increase the ICE torque, provided independently of the ICE speed by compressing the intake air and consequently the ICE filling level supported by the compressor. For operation independent from the ICE speed, the EDC compressor is decoupled from the turbine by using an electric compressor motor (CM) instead of the turbine. ICE performances can be increased by the use of EDC where individual compressor parameters are adapted to the respective application area [02] [03]. This task contains great challenges, increased by demands with regard to pollutant reduction while maintaining constant performance and reduced fuel consumption. The FH-Aachen is equipped with an EDC test bench which enables EDC-investigations in various configurations and operating modes. Characteristic properties of different compressors can be determined, which build the basis for a comparison methodology. Subject of this project is the development of a comparison methodology for EDC with an associated evaluation method and a defined overall evaluation method. For the application of this comparison methodology, corresponding series of measurements are carried out on the EDC test bench using an appropriate test device. KW - electro mobility KW - fuel cell KW - internal combustion engine KW - electrically driven compressors Y1 - 2021 SN - 978-3-902103-94-9 N1 - 1st UNITED-SAIG International Conference, 21-22 APR 2021, Chulalongkorn University, Thailand SP - 45 EP - 46 PB - FH Joanneum CY - Graz ER -