TY  - JOUR
A1  - Alebouyeh Samami, Behzad
A1  - Pieper, Martin
A1  - Breitbach, Gerd
A1  - Hodapp, Josef
T1  - Heat production in the windings of the stators of electric machines under stationary condition
JF  - Heat and mass transfer
N2  - In electric machines due to high currents and resistive losses (joule heating) heat is produced. To avoid damages by overheating the design of effective cooling systems is required. Therefore the knowledge of heat sources and heat transfer processes is necessary. The purpose of this paper is to illustrate a good and effective calculation method for the temperature analysis based on homogenization techniques. These methods have been applied for the stator windings in a slot of an electric machine consisting of copper wires and resin. The key quantity here is an effective thermal conductivity, which characterizes the heterogeneous wire resin-arrangement inside the stator slot. To illustrate the applicability of the method, the analysis of a simplified, homogenized model is compared with the detailed analysis of temperature behavior inside a slot of an electric machine according to the heat generation. We considered here only the stationary situation. The achieved numerical results are accurate and show that the applied homogenization technique works in practice. Finally the results of simulations for the two cases, the original model of the slot and the homogenized model chosen for the slot (unit cell), are compared to experimental results.
Y1  - 2014
U6  - http://dx.doi.org/10.1007/s00231-014-1371-8
SN  - 0947-7411 (Print) ; 1432-1181 (E-Journal)
VL  - 50
SP  - 1707
EP  - 1716
PB  - Springer
CY  - Heidelberg
ER  - 
TY  - CHAP
A1  - Pieper, Martin
A1  - Schulz, Silvia
T1  - Teaching Simulation Methods with COMSOL Multiphysics
N2  - This paper describes two courses on
simulation methods for graduate students:
“Simulation Methods” and “Simulation and
Optimization in Virtual Engineering” The
courses were planned to teach young engineers
how to work with simulation software as well as
to understand the necessary mathematical background.
As simulation software COMSOL is
used. The main philosophy was to combine
theory and praxis in a way that motivates the
students. In addition “soft skills” should be
improved. This was achieved by project work as
final examination. As underlying didactical principle
the ideas of Bloom’s revised taxonomy
were followed. The paper basically focusses on
educational aspects, e.g. how to structure the
course, plan the exercises, organize the project
work and include practical COMSOL examples.
KW  - COMSOL Multiphysics
KW  - Optimization module
KW  - LiveLink for MATLAB
KW  - Bloom Taxonomy
KW  - education
Y1  - 2014
ER  - 
TY  - CHAP
A1  - Wetter, Martin
A1  - Kern, Alexander
T1  - Number of lightning strikes to tall structures - comparison of calculations and measurements using a modern lightning monitoring system
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
Y1  - 2014
SP  - 1
EP  - 7
ER  - 
TY  - JOUR
A1  - Srivastava, A.
A1  - Lahiri, S.
A1  - Maiti, M.
A1  - Knolle, F.
A1  - Hoyler, Friedrich
A1  - Scherer, Ulrich W.
A1  - Schnug, E. W.
T1  - Study of naturally occurring radioactive material (NORM) in top soil of Punjab State from the North Western part of India
JF  - Journal of Radioanalytical and Nuclear Chemistry
Y1  - 2014
U6  - http://dx.doi.org/0.1007/s10967-014-3450-1
SN  - 1588-2780 (E-Journal); 0022-4081 (Print); 0134-0719 (Print); 0236-5731 (Print); 1417-2097 (Print)
VL  - 2014
IS  - 302
SP  - 1049
EP  - 1052
PB  - Springer Nature
CY  - Basel
ER  - 
TY  - CHAP
A1  - Hellmanns, Mark
A1  - Fischer, F.
A1  - Dilger, K.
A1  - Wittor, B.
A1  - Hildebrand, J.
A1  - Werner, F.
T1  - Applikation und Einsatz von faserverstärkten Klebstoffen im Bauwesen abgeschlossenes IGF-Projekt Nr. 16956 B (DVS 08.072, Laufzeit 01.02.2011 - 31.01.2013)
T2  - Tagungsband / 14. Kolloquium Gemeinsame Forschung in der Klebtechnik : 18. und 19. Februar 2014, DECHEMA-Haus, Frankfurt am Main
Y1  - 2014
SP  - 26
EP  - 27
ER  - 
TY  - THES
A1  - Reyes Ochoa, Leonel
T1  - Engineering aspects of a parabolic trough collector field with direct steam generation and an organic rankine cycle
Y1  - 2014
N1  - Aachen, Fachhochsch., Masterarbeit, 2014
PB  - Fachhochschule Aachen
CY  - Aachen
ER  - 
TY  - BOOK
A1  - Kern, Alexander
A1  - Wettingfeld, Jürgen
T1  - Blitzschutzsysteme 1 : allgemeine Grundsätze, Risikomanagement, Schutz von baulichen Anlagen und Personen ; Erläuterungen zu den Normen DIN EN 62305-1 (VDE 0185-305-1):2011-10, DIN EN 62305-2 (VDE 0185-305-2):2013-02, DIN EN 62305-3 (VDE 0185-305-3):2011-10. (VDE-Schriftenreihe Normen verständlich ; 44)
Y1  - 2014
SN  - 978-3-8007-3511-2
PB  - VDE-Verl.
CY  - Berlin [u.a.]
ER  - 
TY  - CHAP
A1  - Rousseau, Alain
A1  - Kern, Alexander
T1  - How to deal with environmental risk in IEC 62305-2
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - The 2nd edition of the lightning risk management
standard (IEC 62305-2) considers structures, which may
endanger environment. In these cases, the loss is not limited to
the structure itself, which is valid for usual structures. In the past
(Edition 1) this danger was simply taken into account by a special
hazard factor, multiplying the existing risk for the structure with
a number. Now, in the edition 2, we add to the risk for the
structure itself a “second risk” due to the losses outside the
structure. The losses outside can be treated independently from
what occurs inside. This is a major advantage to analyze the risk
for sensitive structures, like chemical plants, nuclear plants, or
structures containing explosives, etc. In this paper, the existing
procedure given by the European version EN 62305-2 Ed.2 is
further developed and applied to a few structures.
Y1  - 2014
SP  - 521
EP  - 527
ER  - 
TY  - CHAP
A1  - Kern, Alexander
A1  - Braun, Christian
T1  - Risk management according to IEC 62305-2 edition 2: 2010–12 assessment of structures with a risk of explosion
T2  - 2014 International Conference on Lightning Protection (ICLP), Shanghai, China
N2  - Risk management for structures with a risk of explosion should be considered very carefully when performing a risk analysis according to IEC 62305-2. In contrast to the 2006 edition of the standard, the 2010 edition describes the topic “Structures with a risk of explosion” in more detail. Moreover, in Germany separate procedures and parameters are defined for the risk analysis of structures with a risk of explosion (Supplement 3 of the German DIN EN 62305-2 standard). This paper describes the contents and the relevant calculations of this Supplement 3, together with a numerical example.
Y1  - 2014
SP  - 1237
EP  - 1242
ER  - 
TY  - CHAP
A1  - Goldbach, Daniel
ED  - Wahl, Michael
T1  - Diagnosemaßnahmen im Umfeld der Funktionalen Sicherheit
T2  - AmE 2014 - Automotive meets electronics [Elektronische Ressource] : Beiträge der 5. GMM-Fachtagung vom 18. bis 19. Februar 2014 in Dortmund / Veranst.: VDE/VDI-Gesellschaft Mikroelektronik, Mikrosystem- und Feinwerktechnik (GMM)
Y1  - 2014
SN  - 978-3-8007-3580-8
N1  - GMM-Fachbericht ; 78
SP  - 172
EP  - 179
PB  - VDE-Verl.
CY  - Berlin
ER  -