TY  - CHAP
A1  - Dilthey, Ulrich
A1  - Schleser, Markus
A1  - Puterman, Moshe
T1  - Investigation and improvement of concrete reinforced with epoxy impregnated fabrics
T2  - Proceedings / 12th International Congress Polymers in Concrete, ICPIC 07, chuncheon, Korea, Sept. 26. - 28., 2007
Y1  - 2007
SN  - 978-89-9600450-9
SP  - 725
EP  - 733
PB  - Kangwoon National Univ.
CY  - Chancheon
ER  - 
TY  - JOUR
A1  - Roesner, Andreas
A1  - Scheik, Sven
A1  - Olowinsky, Alexander
A1  - Gillner, Arnold
A1  - Reisgen, Uwe
A1  - Schleser, Markus
T1  - Laser assisted joining of plastic metal hybrids
JF  - Lasers in manufacturing 2011 : proceedings of the sixth International WLT Conference on Lasers in Manufacturing, Munich, May 23 - 26 2011. (Physics procedia ; Vol. 12 (2011), Part B)
Y1  - 2011
SN  - 1875-3892 (E-Journal); 1875-3884 (Print)
SP  - 370
EP  - 377
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
T1  - Virtual welding equipment for simulation of GMAW processes with integration of power source regulation
JF  - Frontiers of materials science
Y1  - 2011
SN  - 2095-0268 (E-Journal); 2095-025X (Print)
VL  - Vol. 5
IS  - Iss. 2
SP  - 79
EP  - 89
PB  - Springer
CY  - Berlin
ER  - 
TY  - CHAP
A1  - Huber, Frédéric
A1  - Bleck, Wolfgang
A1  - Scheik, Sven
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Investigation of galvanneal coating adherence in adhesive bonded joints using lap shear test
T2  - Galvatech 2011 : 8th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, June 21 - 24, 2011, Genova (Italy) ; proceedings
Y1  - 2011
SN  - 978-88-85298-82-8
SP  - Paper No. 43
PB  - Associazione Italiana di Metallurgia
CY  - Mailand
ER  - 
TY  - CHAP
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Schoene, Jens
A1  - Hegger, Josef
A1  - Gallwoszus, Jörg
A1  - Feldmann, Markus
A1  - Kopp, Maik
A1  - Gündel, Max
ED  - Cairns, John W.
T1  - Investigation on bond mechanisms of innovative small-scale shear connectors between steel and concrete
T2  - Bond in concrete 2012. Vol. 2. Bond in new materials and under severe conditions
Y1  - 2012
SN  - 978-88-907078-3-4
SP  - 893
EP  - 898
PB  - Publisher creations
CY  - Manerbio, Brescia
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Statistical modeling of laser welding of DP/TRIP steel sheets
JF  - Optics and laser technology
N2  - In this research work, a statistical analysis of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets was done using response surface methodology. The analysis considered the effect of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm) on the heat input, the weld bead geometry, uniaxial tensile strength, formability limited dome height and welding operation cost. The experimental design was based on Box–Behnken design using linear and quadratic polynomial equations for predicting the mathematical models. The results indicate that the proposed models predict the responses adequately within the limits of welding parameters being used and the welding speed is the most significant parameter during the welding process.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.05.025
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 92
EP  - 101
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Ahmed, Essam
T1  - Optimization of laser welding of DP/TRIP steel sheets using statistical approach
JF  - Optics and laser technology
N2  - Generally, the quality of a weld joint is directly influenced by the welding input parameter settings. Selection of proper process parameters is important to obtain the desired weld bead profile and quality. In this research work, numerical and graphical optimization techniques of the CO2 laser beam welding of dual phase (DP600)/transformation induced plasticity (TRIP700) steel sheets were carried out using response surface methodology (RSM) based on Box–Behnken design. The procedure was established to improve the weld quality, increase the productivity and minimize the total operation cost by considering the welding parameters range of laser power (2–2.2 kW), welding speed (40–50 mm/s) and focus position (−1 to 0 mm). It was found that, RSM can be considered as a powerful tool in experimental welding optimization, even when the experimenter does not have a model for the process. Strong, efficient and low cost weld joints could be achieved using the optimum welding conditions.
Y1  - 2012
U6  - https://doi.org/10.1016/j.optlastec.2011.06.028
SN  - 1879-2545 (E-Journal); 0030-3992 (Print); 0308-4280 (Print)
VL  - 44
IS  - 1
SP  - 255
EP  - 262
PB  - Elsevier
CY  - Amsterdam
ER  - 
TY  - CHAP
A1  - Quadflieg, Till
A1  - Schoene, Jens
A1  - Schleser, Markus
A1  - Jockenhövel, Stefan
A1  - Reisgen, Uwe
A1  - Gries, Thomas
ED  - Heslehurst, Rikard Benton
T1  - Shear connectors for hybrid joints of metal and FRP
T2  - Diversity in composites : conference proceedings : Composites Australia and CRC-ACS 2012 conference
Y1  - 2012
SN  - 978-0-9873285-0-2
SP  - [152]
EP  - [160]
PB  - Composites Australia
CY  - Hawthorne
ER  - 
TY  - JOUR
A1  - Reisgen, Uwe
A1  - Schleser, Markus
A1  - Mokrov, Oleg
A1  - Zabirov, Alexander
A1  - Füssel, Uwe
A1  - Schnick, Michael
A1  - Hertel, Martin
A1  - Jaeckel, Sebastian
T1  - Modelling and visualisation of the GMA process
JF  - Welding and Cutting
Y1  - 2012
SN  - 1612-3433
VL  - 11
IS  - 4
SP  - 242
EP  - 249
PB  - DVS Verlag
CY  - Düsseldorf
ER  - 
TY  - JOUR
A1  - Ramazani, Ali
A1  - Li, Yang
A1  - Mukherjee, Krishnendu
A1  - Prahl, Ulrich
A1  - Bleck, Wolfgang
A1  - Abdurakhmanov, Aydemir
A1  - Schleser, Markus
A1  - Reisgen, Uwe
T1  - Microstructure evolution simulation in hot rolled DP600 steel during gas metal arc welding
JF  - Computational materials science
Y1  - 2013
SN  - 1879-0801 (E-Book); 0927-0256 (Print)
VL  - Vol. 68
SP  - 107
EP  - 116
PB  - Elsevier
CY  - Amsterdam
ER  -