TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Renftle, Georg
T1  - Additive Manufacturing of Drainage Segments for Cooling System of Crucibles Melting Furnaces
T2  - International Conference and Expo on Advanced Ceramics and Composites, (ICACC). January 2015, Florida, USA
N2  - The cooling process in induction based crucible melting furnaces for Industrial applications is one of the important and challenging factors in production and safety engineering. Accordingly, proper implementation of the cooling system of the furnace using optimum cooling guides and fail-safe features are critical in order to improve the safety of the process. Regarding this, manufacturing of porous material with high electrical isolation for the drainage segments of the cooling channels is examined in this study. Consequently, various geometries with different porosities using glass and ceramic powder are fabricated using Selective Laser Sintering (SLS) process. The manufactured parts are examined in a prototype furnace testing and the feasibility of the SLS manufacturing of parts for this application is discussed.
Y1  - 2015
ER  - 
TY  - CHAP
A1  - Fateri, Miranda
A1  - Gebhardt, Andreas
A1  - Gabrielli, Roland Antonius
A1  - Herdrich, Georg
A1  - Fasoulas, Stefanos
A1  - Großmann, Agnes
A1  - Schnauffer, Peter
A1  - Middendorf, Peter
T1  - Additive Manufacturing of Lunar Regolith for Extra-terrestrial Industry Plant
T2  - International Symposium on Space Technology and Science (ICTS). July 2015, Kobe, Japan
Y1  - 2015
ER  - 
TY  - JOUR
A1  - Kämper, Klaus-Peter
A1  - Picard, A.
A1  - Schütze, A.
A1  - Wallach, D.
T1  - Adopting the Foundry Concept of Semiconductor Fabrication on Educational Schemes and the Virtual Technology Lab (VTL). Picard, A.; Kämper, K.-P.; Schütze, A.; Wallach, D.; Walter, T.
JF  - Mst-News (2006)
Y1  - 2006
SN  - 0948-3128
SP  - 15, 16
EP  - u. 35
ER  - 
TY  - JOUR
A1  - Abbas, Karim
A1  - Hedwig, Lukas
A1  - Balc, Nicolae
A1  - Bremen, Sebastian
T1  - Advanced FFF of PEEK: Infill strategies and material characteristics for rapid tooling
JF  - Polymers
N2  - Traditional vulcanization mold manufacturing is complex, costly, and under pressure due to shorter product lifecycles and diverse variations. Additive manufacturing using Fused Filament Fabrication and high-performance polymers like PEEK offer a promising future in this industry. This study assesses the compressive strength of various infill structures (honeycomb, grid, triangle, cubic, and gyroid) when considering two distinct build directions (Z, XY) to enhance PEEK’s economic and resource efficiency in rapid tooling. A comparison with PETG samples shows the behavior of the infill strategies. Additionally, a proof of concept illustrates the application of a PEEK mold in vulcanization. A peak compressive strength of 135.6 MPa was attained in specimens that were 100% solid and subjected to thermal post-treatment. This corresponds to a 20% strength improvement in the Z direction. In terms of time and mechanical properties, the anisotropic grid and isotropic cubic infill have emerged for use in rapid tooling. Furthermore, the study highlights that reducing the layer thickness from 0.15 mm to 0.1 mm can result in a 15% strength increase. The study unveils the successful utilization of a room-temperature FFF-printed PEEK mold in vulcanization injection molding. The parameters and infill strategies identified in this research enable the resource-efficient FFF printing of PEEK without compromising its strength properties. Using PEEK in rapid tooling allows a cost reduction of up to 70% in tool production.
KW  - polyetheretherketone (PEEK)
KW  - rapid tooling
KW  - infill strategy
KW  - compression behavior
KW  - additive manufacturing
KW  - fused filament fabrication
Y1  - 2023
U6  - http://dx.doi.org/10.3390/polym15214293
N1  - This article belongs to the Special Issue "Polymer Materials and Design Processes for Additively Manufactured Products"
VL  - 2023
IS  - 15
PB  - MDPI
CY  - Basel
ER  - 
TY  - CHAP
A1  - Gerhards, Benjamin
A1  - Schleser, Markus
A1  - Otten, Christian
T1  - Advancements of mobile vacuum laser welding for industrial thick sheet applications
T2  - Conference Proceedings 72nd IIW Annual Assembly and International Conference, 7-12 July 2019, Bratislava
Y1  - 2019
SP  - 1
EP  - 8
ER  - 
TY  - JOUR
A1  - Gebhardt, Andreas
T1  - Aktuelle Trends bei RP und RT
JF  - Kunststoffe, München. 87 (1997), H. 1
Y1  - 1997
SN  - 0023-5563
SP  - 27
EP  - 30
ER  - 
TY  - JOUR
A1  - Wollert, Jörg
T1  - Alles automatisch : komplexes qualitätsorientiertes Logistikmanagement durch Vollautomatisierung
JF  - Elektrotechnik für die Automatisierung
Y1  - 1998
SN  - 0013-581X
VL  - Bd. 80
IS  - H. 4
SP  - 196
EP  - 199
ER  - 
TY  - JOUR
A1  - Grundmann, Reinhard
T1  - Allgemeines Geräuschgesetz und spezifische Schallkenngrößen.
JF  - HLH - Zeitschrift für Heizung, Lüftung, Klimatechnik, Haustechnik. 43 (1992), H. 8
Y1  - 1992
SN  - 0017-9906
SP  - 437
EP  - 440
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An application of adaptive control in the behavioural framework
T2  - 21st International Conference on Systems Engineering (ICSEng) : 16 - 18 Aug. 2011, Las Vegas, Nevada ; proceedings
Y1  - 2011
SN  - 978-1-4577-1078-0 ; 978-0-7695-4495-3
SP  - 49
EP  - 54
PB  - IEEE
CY  - Piscataway, NJ
ER  - 
TY  - CHAP
A1  - Pfaff, Raphael
A1  - Larkowski, Tomasz
A1  - Burnham, Keith J.
T1  - An approach to adaptive control in the behavioural framework
T2  - UKACC International Conference on Control 2010 (CONTROL 2010) : Coventry, United Kingdom, 7 - 10 September 2010 ; Vol. 2. (IET seminar digest ; 2010/004)
Y1  - 2010
SN  - 978-1-62748-119-9
SP  - 833
EP  - 838
PB  - Curran
CY  - Red Hook, NY
ER  -